remcosol Posted October 19, 2015 Report Posted October 19, 2015 Hello Pete, Maybe you have any idea where i need to go looking? these are my error logs: Beschrijving Pad naar toepassing met fout: D:\Lockheed Martin\Prepar3D v3\Prepar3D.exe Probleem met handtekening Naam van probleemgebeurtenis: APPCRASH Naam van de toepassing: Prepar3D.exe Versie van toepassing: 3.0.10.14945 Tijdstempel van toepassing: 560b4abe Naam van foutmodule: StackHash_e70a Versie van foutmodule: 10.0.10240.16430 Tijdstempel van foutmodule: 55c599e1 Uitzonderingscode: c0000374 Uitzonderingsmarge: PCH_5F_FROM_ntdll+0x0006919C Versie van besturingssysteem: 10.0.10240.2.0.0.768.101 Landinstelling-id: 1043 Aanvullende informatie 1: e70a Aanvullende informatie 2: e70a6b6c970fc5795e672aeb48fea89e Aanvullende informatie 3: cfb2 Aanvullende informatie 4: cfb2c05a94b504a4b949ac6e4bb2d182 Extra informatie over het probleem Bucket-id: 3a7dc09715af649410f789526c3c9d71 (107644420920) ********* FSUIPC4, Version 4.947c by Pete Dowson ********* Reading options from "D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 Module base=64320000 User Name="remcosol" User Addr=xxxxxxxxxxxxxxx FSUIPC4 Key is provided WideFS7 Key is provided 47 System time = 19/10/2015 13:45:16 47 FLT UNC path = "C:\Users\P3D\Documents\Prepar3D v3 Files\" 47 Trying D:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll 47 Found it: trying to connect 63 FS UNC path = "D:\Lockheed Martin\Prepar3D v3\" 203 ---------------------- Joystick Device Scan ----------------------- 203 Product= 203 Manufacturer= 203 Vendor=0000, Product=0004 (Version 0.0) 203 Serial Number= 203 Product= 203 Manufacturer= 203 Vendor=0000, Product=0004 (Version 0.0) 203 Serial Number= 203 ------------------------------------------------------------------- 219 LogOptions=00000000 00000001 219 ------------------------------------------------------------------- 219 ------ Setting the hooks and direct calls into the simulator ------ 219 --- CONTROLS timer memory location obtained ok 219 --- SIM1 Frictions access gained 219 --- FS Controls Table located ok 219 --- Installed Mouse Macro hooks ok. 219 --- Wind smoothing fix is installed 219 --- All links checked okay 219 ------------------------------------------------------------------- 219 SimConnect_Open succeeded: waiting to check version okay 219 Trying to use SimConnect Prepar3D 3297 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0) 3297 Initialising SimConnect data requests now 3297 FSUIPC Menu entry added 3328 C:\Users\P3D\Documents\Prepar3D v3 Files\start.fxml 3328 D:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\DH-114 Heron\DH-114.air 11719 Weather Mode now = Custom 14094 C:\Users\P3D\Documents\Prepar3D v3 Files\ibiza.fxml 34656 System time = 19/10/2015 13:45:51, Simulator time = 14:06:45 (13:06Z) 34672 Aircraft="De Havilland DH-114 Heron Apache" 35672 Starting everything now ... 36844 Advanced Weather Interface Enabled 357266 Exception 20 "DATA_ERROR", Ref 16922, Index param 1 on write SetData for "ADF SOUND" 923203 Sim stopped: average frame rate for last 888 secs = 29.8 fps 7280188 Exception 3 "UNRECOGNIZED_ID", Ref 265373, Index param 3 on write SetData for "GENERAL ENG THROTTLE LEVER POSITION:1" 8476703 Sim stopped: average frame rate for last 7548 secs = 29.8 fps 8706485 Sim stopped: average frame rate for last 180 secs = 29.7 fps 8779516 Sim stopped: average frame rate for last 59 secs = 29.7 fps 9694969 Sim stopped: average frame rate for last 906 secs = 29.8 fps 10186938 Sim stopped: average frame rate for last 483 secs = 29.8 fps 10240360 Sim stopped: average frame rate for last 43 secs = 29.7 fps 10294594 Sim stopped: average frame rate for last 34 secs = 29.7 fps 10335453 Sim stopped: average frame rate for last 33 secs = 29.7 fps 10449203 Sim stopped: average frame rate for last 101 secs = 29.8 fps 10611203 Sim stopped: average frame rate for last 144 secs = 29.8 fps 14119875 ***ERROR C0000005 at 71884DF4 ExWriteStateData(Offset=0C04, Size=2) 14119875 *** Access violation trying to read address 00000485 14119875 *** EAX 0000047D EBX 00000001 ECX 4FA49858 EDX 00000000 EDI 10EB058C ESI 1C0AF0E4 Best regards, Remco
Pete Dowson Posted October 19, 2015 Report Posted October 19, 2015 Maybe you have any idea where i need to go looking? 14119875 ***ERROR C0000005 at 71884DF4 ExWriteStateData(Offset=0C04, Size=2) 14119875 *** Access violation trying to read address 00000485 14119875 *** EAX 0000047D EBX 00000001 ECX 4FA49858 EDX 00000000 EDI 10EB058C ESI 1C0AF0E4 Something you are using outside of the Sim is using FSUIPC. It is asking FSUIPC to change the Rudder Trim, which FSUIPC then attempts by sending the new trim value to the SimConnect variable "RUDDER TRIM PCT".. It is this which is then making P3Dv3 crash. I think it is probably part of the overall problems Version 3 has with controls. Please send this complete report including my analysis to L-M on their support forum. Pete
remcosol Posted October 19, 2015 Author Report Posted October 19, 2015 357266 Exception 20 "DATA_ERROR", Ref 16922, Index param 1 on write SetData for "ADF SOUND" 923203 Sim stopped: average frame rate for last 888 secs = 29.8 fps 7280188 Exception 3 "UNRECOGNIZED_ID", Ref 265373, Index param 3 on write SetData for "GENERAL ENG THROTTLE LEVER POSITION:1" Are these two due to the same reason? I am having this problem since p3d v2.4 for some reason. I am trying to figure out if it is hardware related (switches etc) although at this moment i do not have an adf sound toggle switch because i am still trying to figure out what is going on. Do the stock keyboard assignments (p3d) need to deleted as well? Might it be my wireless keyboard that is making unwanted inputs? Thank you, Remco
Pete Dowson Posted October 19, 2015 Report Posted October 19, 2015 357266 Exception 20 "DATA_ERROR", Ref 16922, Index param 1 on write SetData for "ADF SOUND" 923203 Sim stopped: average frame rate for last 888 secs = 29.8 fps 7280188 Exception 3 "UNRECOGNIZED_ID", Ref 265373, Index param 3 on write SetData for "GENERAL ENG THROTTLE LEVER POSITION:1" Are these two due to the same reason? No, they look completely unrelated. Unless, that is, you hasve some sort of general corruption going on because of bad memory or something similar. But then you could get almost any symptoms trashed data is unpredictable. Do the stock keyboard assignments (p3d) need to deleted as well? Might it be my wireless keyboard that is making unwanted inputs? Keys assigned in FSUIPC will override any in FS, same as for any program taking keystrokes. And unwanted inputs cannot cause crashes unless something else is wrong. Pete
remcosol Posted October 19, 2015 Author Report Posted October 19, 2015 Thank you Pete , I just build a new computer with new components to make sure (as much as possible ) that the pc is ok . It might be the joystick card or potentiometer. I have replaced both . More testing tomorrow and see if it pops up again , or something different ?
remcosol Posted October 19, 2015 Author Report Posted October 19, 2015 My stackshash fault module is always the same number e70a, I don't know if this is always related to the same (rudder trim) event ?
Pete Dowson Posted October 19, 2015 Report Posted October 19, 2015 My stackshash fault module is always the same number e70a, I don't know if this is always related to the same (rudder trim) event ? Sorry, I don't know what the number associated with "Stackhash_" is intended to convey. You can of course use FSUIPC Monitoring to monitor the rudder trim value. 0C04 as type S16, or more accurately 2EC0 at type FLT64. The latter is the actual trim angle in radians. And you could try stopping whatever it is which is trying to change the rudder trim. Normally rudder trip is kept perfectly centred or neutral. Pete
remcosol Posted October 20, 2015 Author Report Posted October 20, 2015 I am trying to figure out what might be trying to Center the trim , I have nothing running that I know of , other than the rudder trim itself, that controls the rudder trim . I'm hoping it is a faulty potentiometer or joystick card , today I'll have the answer I hope ....
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now