Martinlest Posted February 3, 2016 Report Posted February 3, 2016 I have the latest version but lately the programme suddenly quits in mid-operation. I have to run it three or four times for it to finish and make the new csv file. I can't see how it can be an FS9 scenery file error per se, as it always does do a complete run if I persevere and keep restarting it (and never seems to quit in the same place). Any reason (and fix?) for this? Thanks.
Pete Dowson Posted February 7, 2016 Report Posted February 7, 2016 I have the latest version but lately the programme suddenly quits in mid-operation. I have to run it three or four times for it to finish and make the new csv file. I can't see how it can be an FS9 scenery file error per se, as it always does do a complete run if I persevere and keep restarting it (and never seems to quit in the same place). Any reason (and fix?) for this? Thanks. I have never heard of such a problem before, and if it occurs at a different place each time I can only suggest that you have a disk or memory problem in your hardware. Pete
Martinlest Posted February 7, 2016 Author Report Posted February 7, 2016 :razz: I think a disc or hardware problem (on a PC which runs several hours a day, every day) that only ever manifests itself in 'MakeRunways' is not very likely. No matter. It always finishes the csv file after a few tries..
Pete Dowson Posted February 8, 2016 Report Posted February 8, 2016 :razz: I think a disc or hardware problem (on a PC which runs several hours a day, every day) that only ever manifests itself in 'MakeRunways' is not very likely. Well, okay, think that. But MakeRunways is used on thousands of systems with no other such reports. Pete
Martinlest Posted February 15, 2016 Author Report Posted February 15, 2016 OK, the programme is this time aborting at a certain scenery entry, different from the last time I had this issue, but definitely the same place on this occasion - the list of scenery.cfg entries processed goes by so fast that it took a while, but in the end I tracked down the problem to one single AFCAD file. If I disable this to bgx before I run MakeRunways.exe, the programme runs just fine. Re-enable the bgl file and the programme aborts. I looked at the AFCAD file in AFCAD2 and there are no errors in it however. It's a small file and I can't see why it would cause any issues. If by any chance you are interested, Pete, (or anyone else come to that) to look at it, (and see if it causes the same problem on your PC?) I can upload it... Otherwise, well, problem sorted, I have a batch file now which disables and re-enables the file every time MakeRunways creates its database...
Pete Dowson Posted February 15, 2016 Report Posted February 15, 2016 OK, the programme is this time aborting at a certain scenery entry, different from the last time I had this issue, but definitely the same place on this occasion - the list of scenery.cfg entries processed goes by so fast that it took a while, but in the end I tracked down the problem to one single AFCAD file. If I disable this to bgx before I run MakeRunways.exe, the programme runs just fine. Re-enable the bgl file and the programme aborts. I looked at the AFCAD file in AFCAD2 and there are no errors in it however. It's a small file and I can't see why it would cause any issues. If by any chance you are interested, Pete, (or anyone else come to that) to look at it, (and see if it causes the same problem on your PC?) I can upload it... Please ZIP up the BGL and email it to me -- petedowson@btconnect.com. Pete
Pete Dowson Posted February 15, 2016 Report Posted February 15, 2016 .. OK, done. Unfortunately, installing that BGL here doesn't cause any problems at all. It processes perfectly normally. Here are the results in the Runways.txt log file: ============================================================================= TestScenery\scenery\AF2_UAFG.bgl ============================================================================= Airport UAFG :N42:38:52.5106 E077:01:53.6307 5496ft Country Name="Kyrgyzstan" State Name="" City Name="Chelpon Ata" Airport Name="Chelpon Ata" in file: TestScenery\scenery\AF2_UAFG.bgl Runway 34 /16 centre: N42:38:50.8909 E077:01:48.7192 5496ft Runway 34 closed for take-off Runway 16 closed for landing Computed start 34 : Lat 42.642120 Long 77.032560 Start 16 : N42:39:07.3796 E077:01:41.5092 5496ft Hdg: 162.0T, Length 4100ft Computed start 16 : Lat 42.652817 Long 77.027835 Hdg: 342.000 true (MagVar 4.000), Concrete, 4100 x 110 ft *** Runway *** UAFG0340 Lat 42.642120 Long 77.032562 Alt 5496 Hdg 338 Len 4100 Wid 110 *** Runway *** UAFG0160 Lat 42.652817 Long 77.027832 Alt 5496 Hdg 158 Len 4100 Wid 110 COM: Type=6 (TOWER), Freq=128.00, Name="×åëïîí Àòà" Taxipoint #0, type 1 (normal): N42:38:31.8430 E077:01:57.1923 -- Forward Taxipoint #1, type 1 (normal): N42:39:10.1007 E077:01:40.3137 -- Forward Taxipoint #2, type 1 (normal): N42:38:57.3697 E077:01:45.9286 -- Forward Taxipoint #3, type 1 (normal): N42:38:58.2768 E077:01:49.9358 -- Forward Taxipoint #4, type 1 (normal): N42:39:07.0233 E077:01:41.6685 -- Forward Taxipoint #5, type 1 (normal): N42:38:33.3008 E077:01:56.5580 -- Forward Taxipoint #6, type 1 (normal): N42:38:54.3895 E077:01:52.3740 -- Forward Taxipoint #7, type 1 (normal): N42:38:58.0824 E077:01:51.0559 -- Forward Taxipoint #8, type 1 (normal): N42:38:55.2317 E077:01:52.0278 -- Forward Taxipoint #9, type 1 (normal): N42:38:54.6810 E077:01:52.2466 -- Forward Taxipoint #10, type 1 (normal): N42:38:55.5557 E077:01:51.9008 -- Forward Taxipoint #11, type 1 (normal): N42:38:56.1712 E077:01:51.6431 -- Forward Taxipoint #12, type 1 (normal): N42:38:56.3655 E077:01:51.5644 -- Forward Taxipoint #13, type 1 (normal): N42:38:57.1106 E077:01:51.2650 -- Forward Taxipoint #14, type 1 (normal): N42:39:00.5768 E077:01:49.9615 -- Forward Taxipoint #15, type 1 (normal): N42:39:00.8683 E077:01:51.2828 -- Forward Taxipoint #16, type 1 (normal): N42:38:59.8641 E077:01:51.7300 -- Forward Taxipoint #17, type 1 (normal): N42:38:59.5402 E077:01:50.4186 -- Forward Taxipoint #18, type 1 (normal): N42:39:00.3824 E077:01:49.1504 -- Forward Taxipoint #19, type 1 (normal): N42:38:58.4064 E077:01:52.3224 -- Forward Taxipoint #20, type 1 (normal): N42:38:59.3458 E077:01:49.5429 -- Forward Gate 1 [#G0]: N42:39:00.3824 E077:01:51.5016 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 162.3T Gate 2 [#G1]: N42:39:00.0585 E077:01:50.1802 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 162.2T Gate 3 [#G2]: N42:38:59.2486 E077:01:51.9989 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 341.5T Gate 4 [#G3]: N42:38:58.9247 E077:01:50.6938 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 341.8T Gate 5 [#G4]: N42:38:57.3050 E077:01:52.1857 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 72.4T Gate 6 [#G5]: N42:38:56.3655 E077:01:52.5478 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 72.4T Gate 7 [#G6]: N42:38:55.4261 E077:01:52.8742 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 72.4T Gate 8 [#G7]: N42:38:54.5190 E077:01:51.4050 Type 2 (GA Ramp Small), Size 10.0m, Hdg 72.4T Gate 9 [#G8]: N42:38:55.3289 E077:01:51.0589 Type 2 (GA Ramp Small), Size 10.0m, Hdg 72.4T Gate 10 [#G9]: N42:38:56.1712 E077:01:50.7421 Type 2 (GA Ramp Small), Size 10.0m, Hdg 72.4T Gate 11 [#G10]: N42:38:57.0134 E077:01:50.4298 Type 2 (GA Ramp Small), Size 10.0m, Hdg 72.4T Taxipath (Name #0): Type 1 (Taxi), Start#=2, End#=3, Wid=15.24m Taxipath (Runway 34): Type 2 (Runway), Start#=4, End#=2, Wid=33.53m Taxipath (Runway 34): Type 2 (Runway), Start#=4, End#=1, Wid=36.58m Taxipath (Runway 34): Type 2 (Runway), Start#=5, End#=2, Wid=33.53m Taxipath (Runway 34): Type 2 (Runway), Start#=5, End#=0, Wid=36.58m Taxipath (Name #0): Type 3 (Parking), Start#=8, End#=G6, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=9, End#=8, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=9, End#=6, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=9, End#=G7, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=10, End#=8, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=10, End#=G8, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=11, End#=10, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=11, End#=G5, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=12, End#=11, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=12, End#=G9, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=13, End#=12, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=13, End#=7, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=13, End#=G10, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=13, End#=G4, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=14, End#=G1, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=15, End#=14, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=15, End#=G0, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=16, End#=G0, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=16, End#=G2, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=17, End#=16, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=17, End#=G1, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=17, End#=G3, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=18, End#=14, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=7, End#=3, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=19, End#=7, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=19, End#=G2, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=7, End#=G3, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=20, End#=18, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=20, End#=3, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=17, End#=20, Wid=12.19m Taxiname: #0 = TaxiWay : G6-8-9-6 TaxiWay : G7-9 TaxiWay : G8-10-8 TaxiWay : G5-11-10 TaxiWay : G9-12-11 TaxiWay : G10-13-12 TaxiWay : G4-13-7-3-2 TaxiWay : G1-14-15-G0 TaxiWay : G0-16-G2 TaxiWay : G1-17-16 TaxiWay : G3-17-20-18-14 TaxiWay : G2-19-7-G3 TaxiWay : 20-3 FSM A/P UAFG, lat=42.647919, long=77.031563, alt=5496 So I'm afraid is looks more complex that this, and so far very specific to your system. I've never had any other similar crash reports for MakeRunways at all. Unless I can reproduce it I don't really have much chance of finding it. But one last stab. In the case where it crashes with this file enabled you should still have a partially completed log (Runways.txt). I know you said it was too large, even ZIPped, to send, but could you at least extract the last few entries so I can see where it got to? Pete
Martinlest Posted February 15, 2016 Author Report Posted February 15, 2016 Hi Pete, Here is the UAFG entry, with the error at the place where the Programme aborts... Addon Scenery\Kyrgyzstan\Kyrgyzstan Airports\scenery\AF2_UAFG.bgl=============================================================================Airport UAFG :N42:38:52.5106 E077:01:53.6307 5496ft Country Name="Kyrgyzstan" State Name="" City Name="Chelpon Ata" Airport Name="Chelpon Ata" in file: Addon Scenery\Kyrgyzstan\Kyrgyzstan Airports\scenery\AF2_UAFG.bgl Runway 34 /16 centre: N42:38:50.8909 E077:01:48.7192 5496ft Runway 34 closed for take-off Runway 16 closed for landing Computed start 34 : Lat 42.642120 Long 77.032560 Start 16 : N42:39:07.3796 E077:01:41.5092 5496ft Hdg: 162.0T, Length 4100ft Computed start 16 : Lat 42.652817 Long 77.027835 Hdg: 342.000 true (MagVar 4.000), Concrete, 4100 x 110 ft *** Runway *** UAFG0340 Lat 42.642120 Long 77.032562 Alt 5496 Hdg 338 Len 4100 Wid 110 *** Runway *** UAFG0160 Lat 42.652817 Long 77.027832 Alt 5496 Hdg 158 Len 4100 Wid 110 COM: Type=6 (TOWER), Freq=128.00, Name="×åëïîí Àòà" Taxipoint #0, type 1 (normal): N42:38:31.8430 E077:01:57.1923 -- Forward Taxipoint #1, type 1 (normal): N42:39:10.1007 E077:01:40.3137 -- Forward Taxipoint #2, type 1 (normal): N42:38:57.3697 E077:01:45.9286 -- Forward Taxipoint #3, type 1 (normal): N42:38:58.2768 E077:01:49.9358 -- Forward Taxipoint #4, type 1 (normal): N42:39:07.0233 E077:01:41.6685 -- Forward Taxipoint #5, type 1 (normal): N42:38:33.3008 E077:01:56.5580 -- Forward Taxipoint #6, type 1 (normal): N42:38:54.3895 E077:01:52.3740 -- Forward Taxipoint #7, type 1 (normal): N42:38:58.0824 E077:01:51.0559 -- Forward Taxipoint #8, type 1 (normal): N42:38:55.2317 E077:01:52.0278 -- Forward Taxipoint #9, type 1 (normal): N42:38:54.6810 E077:01:52.2466 -- Forward Taxipoint #10, type 1 (normal): N42:38:55.5557 E077:01:51.9008 -- Forward Taxipoint #11, type 1 (normal): N42:38:56.1712 E077:01:51.6431 -- Forward Taxipoint #12, type 1 (normal): N42:38:56.3655 E077:01:51.5644 -- Forward Taxipoint #13, type 1 (normal): N42:38:57.1106 E077:01:51.2650 -- Forward Taxipoint #14, type 1 (normal): N42:39:00.5768 E077:01:49.9615 -- Forward Taxipoint #15, type 1 (normal): N42:39:00.8683 E077:01:51.2828 -- Forward Taxipoint #16, type 1 (normal): N42:38:59.8641 E077:01:51.7300 -- Forward Taxipoint #17, type 1 (normal): N42:38:59.5402 E077:01:50.4186 -- Forward Taxipoint #18, type 1 (normal): N42:39:00.3824 E077:01:49.1504 -- Forward Taxipoint #19, type 1 (normal): N42:38:58.4064 E077:01:52.3224 -- Forward Taxipoint #20, type 1 (normal): N42:38:59.3458 E077:01:49.5429 -- Forward Gate 1 [#G0]: N42:39:00.3824 E077:01:51.5016 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 162.3T Gate 2 [#G1]: N42:39:00.0585 E077:01:50.1802 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 162.2T Gate 3 [#G2]: N42:38:59.2486 E077:01:51.9989 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 341.5T Gate 4 [#G3]: N42:38:58.9247 E077:01:50.6938 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 341.8T Gate 5 [#G4]: N42:38:57.3050 E077:01:52.1857 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 72.4T Gate 6 [#G5]: N42:38:56.3655 E077:01:52.5478 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 72.4T Gate 7 [#G6]: N42:38:55.4261 E077:01:52.8742 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 72.4T Gate 8 [#G7]: N42:38:54.5190 E077:01:51.4050 Type 2 (GA Ramp Small), Size 10.0m, Hdg 72.4T Gate 9 [#G8]: N42:38:55.3289 E077:01:51.0589 Type 2 (GA Ramp Small), Size 10.0m, Hdg 72.4T Gate 10 [#G9]: N42:38:56.1712 E077:01:50.7421 Type 2 (GA Ramp Small), Size 10.0m, Hdg 72.4T Gate 11 [#G10]: N42:38:57.0134 E077:01:50.4298 Type 2 (GA Ramp Small), Size 10.0m, Hdg 72.4T Taxipath (Name #0): Type 1 (Taxi), Start#=2, End#=3, Wid=15.24m Taxipath (Runway 34): Type 2 (Runway), Start#=4, End#=2, Wid=33.53m Taxipath (Runway 34): Type 2 (Runway), Start#=4, End#=1, Wid=36.58m Taxipath (Runway 34): Type 2 (Runway), Start#=5, End#=2, Wid=33.53m Taxipath (Runway 34): Type 2 (Runway), Start#=5, End#=0, Wid=36.58m Taxipath (Name #0): Type 3 (Parking), Start#=8, End#=G6, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=9, End#=8, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=9, End#=6, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=9, End#=G7, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=10, End#=8, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=10, End#=G8, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=11, End#=10, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=11, End#=G5, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=12, End#=11, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=12, End#=G9, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=13, End#=12, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=13, End#=7, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=13, End#=G10, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=13, End#=G4, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=14, End#=G1, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=15, End#=14, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=15, End#=G0, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=16, End#=G0, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=16, End#=G2, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=17, End#=16, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=17, End#=G1, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=17, End#=G3, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=18, End#=14, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=7, End#=3, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=19, End#=7, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=19, End#=G2, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=7, End#=G3, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=20, End#=18, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=20, End#=3, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=17, End#=20, Wid=12.19m Taxiname: #0 = TaxiWay : G6-8-9-6 TaxiWay : G7-9 TaxiWay : G8-10-8 TaxiWay : G5-11-10 TaxiWay : G9-12-11 TaxiWay : G10-13-12 TaxiWay : G4-13-7-3-2 TaxiWay : G1-14-15-G0 TaxiWay : G0-16-G2 TaxiWay : G1-17-16 TaxiWay : G3-17-20-18-14 TaxiWay : G2-19-7-G3 TaxiWay : 20-3 FSM A/P UAFG, lat=42.647919, long=77.031563, alt=5496***ERROR C0000005 at 00407E23:*** Access violation trying to read address 0031DF74*** EAX 00000001 EBX 11EA0990 ECX 00000001 EDX FFFFFFFF EDI 0B31DFB4 ESI 0031DF60
Pete Dowson Posted February 15, 2016 Report Posted February 15, 2016 ***ERROR C0000005 at 00407E23: *** Access violation trying to read address 0031DF74 *** EAX 00000001 EBX 11EA0990 ECX 00000001 EDX FFFFFFFF EDI 0B31DFB4 ESI 0031DF60 Aha, at last -- some crash data. I wish you'd found this in the first place. It pinpoints the place in the program. But can you now confirm you are using MakeRunways version 4.694? If not could you please update and find the crash information in the log for that version -- otherwise the data isn't useful as I only have the current version source. Also, can you look at a log from when you stop that scenery being scanned and tell me what the very NEXT BGL file examined is? Because from the above it looks like it does actually finish the rogue one successfully. Pete
Martinlest Posted February 15, 2016 Author Report Posted February 15, 2016 Yes, I am using v.4.694. The AFCADs in the scenery folder run .... AF2_UAFE.bgl, AF2_UAFG.bgl, AF2_UAFI.bgl; so UAFI is the next one. Here is that part of the runways.text file when I exclude UAFG. The following file completes OK... =============================================================================Addon Scenery\Kyrgyzstan\Kyrgyzstan Airports\scenery\AF2_UAFE.bgl=============================================================================Airport UAFE :N41:28:52.4236 E071:43:21.7682 4226ft Country Name="Kyrgyzstan" State Name="" City Name="Kerben" Airport Name="Kerben" in file: Addon Scenery\Kyrgyzstan\Kyrgyzstan Airports\scenery\AF2_UAFE.bgl Runway 4 /22 centre: N41:28:52.8771 E071:43:22.1608 4226ft Start 4 : N41:28:35.8377 E071:42:59.4548 4226ft Hdg: 45.0T, Length 5512ft Computed start 4 : Lat 41.476009 Long 71.715689 Start 22 : N41:29:09.2039 E071:43:43.7804 4226ft Hdg: 225.0T, Length 5512ft Computed start 22 : Lat 41.486698 Long 71.729959 Offset Threshold secondary: 262 feet Hdg: 45.000 true (MagVar 0.000), Concrete, 5512 x 98 ft *** Runway *** UAFE0040 Lat 41.476009 Long 71.715691 Alt 4226 Hdg 45 Len 5512 Wid 98 *** Runway *** UAFE0220 Lat 41.486698 Long 71.729958 Alt 4226 Hdg 225 Len 5512 Wid 98 COM: Type=6 (TOWER), Freq=122.10, Name="Kerben Tower" Taxipoint #0, type 1 (normal): N41:28:33.6025 E071:42:56.5067 -- Forward Taxipoint #1, type 1 (normal): N41:29:12.2165 E071:43:47.9310 -- Forward Taxipoint #2, type 1 (normal): N41:28:48.4391 E071:43:16.2628 -- Forward Taxipoint #3, type 1 (normal): N41:28:46.7870 E071:43:18.5045 -- Forward Taxipoint #4, type 1 (normal): N41:28:45.8476 E071:43:17.3056 -- Forward Taxipoint #5, type 1 (normal): N41:28:47.8560 E071:43:19.9514 -- Forward Taxipoint #6, type 2 (Hold Short): N41:28:47.8560 E071:43:17.0335 -- Reverse Taxipoint #7, type 1 (normal): N41:28:46.4307 E071:43:13.5591 -- Forward Taxipoint #8, type 1 (normal): N41:28:49.6053 E071:43:17.8174 -- Forward Gate 1 [#G0]: N41:28:45.3293 E071:43:17.9864 Type 8 (Small Gate), Size 22.0m, Hdg 134.4T Gate 2 [#G1]: N41:28:46.3335 E071:43:19.3928 Type 8 (Small Gate), Size 22.0m, Hdg 134.7T Gate 3 [#G2]: N41:28:47.2729 E071:43:20.7480 Type 8 (Small Gate), Size 22.0m, Hdg 134.7T Taxipath (Name #0): Type 1 (Taxi), Start#=4, End#=3, Wid=22.00m Taxipath (Name #0): Type 1 (Taxi), Start#=3, End#=5, Wid=22.00m Taxipath (Name #0): Type 3 (Parking), Start#=4, End#=G0, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=3, End#=G1, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=5, End#=G2, Wid=12.19m Taxipath (Name #0): Type 1 (Taxi), Start#=6, End#=2, Wid=22.00m Taxipath (Name #0): Type 1 (Taxi), Start#=6, End#=3, Wid=22.00m Taxipath (Runway 4): Type 2 (Runway), Start#=7, End#=2, Wid=30.00m Taxipath (Runway 4): Type 2 (Runway), Start#=7, End#=0, Wid=30.00m Taxipath (Runway 4): Type 2 (Runway), Start#=8, End#=2, Wid=30.00m Taxipath (Runway 4): Type 2 (Runway), Start#=8, End#=1, Wid=30.00m Taxiname: #0 = TaxiWay : G0-4-3-5-G2 TaxiWay : G1-3-6-2 FSM A/P UAFE, lat=41.481236, long=71.722710, alt=4226=============================================================================Addon Scenery\Kyrgyzstan\Kyrgyzstan Airports\scenery\AF2_UAFI.bgl=============================================================================Airport UAFI :N39:49:06.9879 E069:34:04.1856 4756ft Country Name="Kyrgyzstan" State Name="" City Name="Isfana" Airport Name="Karabulak" in file: Addon Scenery\Kyrgyzstan\Kyrgyzstan Airports\scenery\AF2_UAFI.bgl Runway 28 /10 centre: N39:49:07.7005 E069:34:03.0767 4756ft Start 28 : N39:49:02.0639 E069:34:35.0090 4756ft Hdg: 283.0T, Length 5576ft Computed start 28 : Lat 39.817085 Long 69.577222 Start 10 : N39:49:13.3371 E069:33:31.3008 4756ft Hdg: 103.0T, Length 5576ft Computed start 10 : Lat 39.820526 Long 69.557819 Hdg: 283.000 true (MagVar 0.000), Macadam, 5576 x 131 ft *** Runway *** UAFI0280 Lat 39.817085 Long 69.577225 Alt 4756 Hdg 283 Len 5576 Wid 131 *** Runway *** UAFI0100 Lat 39.820526 Long 69.557816 Alt 4756 Hdg 103 Len 5576 Wid 131 COM: Type=6 (TOWER), Freq=122.10, Name="Isfana-Karabulak" Taxipoint #0, type 1 (normal): N39:49:13.7907 E069:33:28.7999 -- Forward Taxipoint #1, type 1 (normal): N39:49:01.7076 E069:34:36.9724 -- Forward Taxipoint #2, type 1 (normal): N39:49:07.0526 E069:34:06.6334 -- Forward Taxipoint #3, type 1 (normal): N39:49:04.6879 E069:34:01.9681 -- Forward Taxipoint #4, type 1 (normal): N39:49:04.1696 E069:34:04.7843 -- Forward Taxipoint #5, type 1 (normal): N39:49:04.4287 E069:34:03.4726 -- Forward Taxipoint #6, type 1 (normal): N39:49:13.5963 E069:33:29.7863 -- Forward Taxipoint #7, type 1 (normal): N39:49:01.8372 E069:34:36.0952 -- Forward Taxipoint #8, type 2 (Hold Short): N39:49:06.0484 E069:34:05.4249 -- Forward Taxipoint #9, type 1 (normal): N39:49:16.4470 E069:32:56.5442 -- Forward Taxipoint #10, type 1 (normal): N39:48:51.4062 E069:35:17.4680 -- Forward Gate 1 [#G0]: N39:49:04.2019 E069:34:01.8166 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 193.5T Gate 2 [#G1]: N39:49:03.8456 E069:34:03.3036 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 193.5T Gate 3 [#G2]: N39:49:03.5865 E069:34:04.6120 Type 3 (GA Ramp Medium), Size 14.0m, Hdg 193.5T Taxipath (Name #0): Type 3 (Parking), Start#=3, End#=G0, Wid=12.19m Taxipath (Name #0): Type 3 (Parking), Start#=4, End#=G2, Wid=12.19m Taxipath (Name #0): Type 4 (Path), Start#=3, End#=5, Wid=15.00m Taxipath (Name #0): Type 4 (Path), Start#=5, End#=4, Wid=15.00m Taxipath (Name #0): Type 3 (Parking), Start#=5, End#=G1, Wid=22.00m Taxipath (Runway 28): Type 2 (Runway), Start#=6, End#=2, Wid=40.00m Taxipath (Runway 28): Type 2 (Runway), Start#=6, End#=0, Wid=40.00m Taxipath (Runway 28): Type 2 (Runway), Start#=7, End#=2, Wid=40.00m Taxipath (Runway 28): Type 2 (Runway), Start#=7, End#=1, Wid=40.00m Taxipath (Name #0): Type 1 (Taxi), Start#=8, End#=5, Wid=22.00m Taxipath (Name #0): Type 1 (Taxi), Start#=8, End#=2, Wid=22.00m Taxipath (Name #0): Type 4 (Path), Start#=9, End#=10, Wid=609.60m Taxiname: #0 = TaxiWay : G0-3-5-4-G2 TaxiWay : G1-5-8-2 TaxiWay : 9-10 FSM A/P UAFI, lat=39.818615, long=69.567833, alt=4756
Pete Dowson Posted February 16, 2016 Report Posted February 16, 2016 Thanks for the information. I can see the location of the error, but the error data makes no sense. I think something s causing some sort of stack corruption. But I still need to reproduce the error before I can specifically nail it down to either a data problem in a BGL or a true bug in the code. If I think of something I'll get back to you, but meanwhile I think I'll have to leave you to use the work-around you've devised. Pete
Martinlest Posted February 16, 2016 Author Report Posted February 16, 2016 OK, thanks Pete. I am pretty sure that it is an error 'unique' to my setup, as MakeRunways has only started having problems over the past couple of months - it never objected to this AFCAD (which has been installed for a few years I think) prior to that. Something I added, but it's far to late for me to find out what that 'something' might be. (That said, I did try running MakeRunways with only UAFG + default folders active in the scenery.cfg file however, and the programme still aborted!). No big deal - I probably never fly to or form UAFG anyway! It's more out of interest to understand what is happening.. If you find out, I'd be interested to know. Meanwhile, I usually run MakeRunways as part of a series of scripts/macros which update my FSNavigator and PFE information; as I say, it was easy to add another small script to automatically disable UAFG before MakeRunways starts and re-enable it after it has finished.
Pete Dowson Posted February 16, 2016 Report Posted February 16, 2016 I did try running MakeRunways with only UAFG + default folders active in the scenery.cfg file however, and the programme still aborted! Hmm. That's interesting, because it's okay doing that here. Did you add it right at the end? Maybe I need to move its loading position. Pete
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now