birdguy Posted March 2, 2016 Report Share Posted March 2, 2016 After switching from FSX to P3Dv3 my registration doesn't seem to take. It looks like it's accepting my registration and confirmation but when I go back to the sim FSUIPC tells me I have an unregistered version. I have FSUIPC4.949. Noel Link to comment Share on other sites More sharing options...
Pete Dowson Posted March 3, 2016 Report Share Posted March 3, 2016 After switching from FSX to P3Dv3 my registration doesn't seem to take. It looks like it's accepting my registration and confirmation but when I go back to the sim FSUIPC tells me I have an unregistered version. I have FSUIPC4.949. Find the FSUIPC4.LOG file, n the P3D Modules folder, and show that to me, please. Pete Link to comment Share on other sites More sharing options...
birdguy Posted March 3, 2016 Author Report Share Posted March 3, 2016 Here it is ********* FSUIPC4, Version 4.949 by Pete Dowson *********Prepar3D.exe version = 3.1.2.15831Reading options from "D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"Running inside Prepar3D v3 on Windows 7Module base=5E8A0000User Name="Noel Sivertson"User Addr="birdguy@cableone.net"FSUIPC4 Key is providedWIDEFS7 not user registered, or expired 63 System time = 26/01/2016 19:25:05 63 FLT path = "C:\Users\Noel\Documents\Prepar3D v3 Files\" 63 ------ Module Version Check ------ 63 acontain.dll: 3.1.2.15831 63 api.dll: 3.1.2.15831 63 controls.dll: 3.1.2.15831 63 fs-traffic.dll: 3.1.2.15831 63 G3D.dll: 3.1.2.15831 63 sim1.dll: 3.1.2.15831 63 visualfx.dll: 3.1.2.15831 63 weather.dll: 3.1.2.15831 63 window.dll: 3.1.2.15831 63 ---------------------------------- 63 Trying D:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll 63 Found it: trying to connect 78 FS path = "D:\Lockheed Martin\Prepar3D v3\" 203 ---------------------- Joystick Device Scan ----------------------- 203 Product= Saitek X52 Flight Control System 203 Manufacturer= Saitek 203 Vendor=06A3, Product=075C (Version 1.0) 203 Serial Number= 203 ------------------------------------------------------------------- 219 LogOptions=00000000 00000001 219 ------------------------------------------------------------------- 219 ------ Setting the hooks and direct calls into the simulator ------ 219 --- CONTROLS timer memory location obtained ok 219 --- SIM1 Frictions access gained 219 --- FS Controls Table located ok 219 --- Installed Mouse Macro hooks ok. 219 --- Wind smoothing fix is installed 219 --- All links okay (except older global weather setting method) 219 ------------------------------------------------------------------- 219 SimConnect_Open succeeded: waiting to check version okay 219 Trying to use SimConnect Prepar3D 57877 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.1.3.1 (SimConnect: 3.1.0.0) 57877 Initialising SimConnect data requests now 57877 FSUIPC Menu entry added 57877 C:\Users\Noel\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml 57877 D:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air 85739 === NOTE: not calling SimConnect_Close ... 86737 System time = 26/01/2016 19:26:31 86737 *** FSUIPC log file being closedMinimum frame rate was 32768.0 fps, Maximum was 0.0 fpsMinimum available memory recorded was 32768MbMemory managed: 4 Allocs, 4 Freed********* FSUIPC Log file closed *********** Link to comment Share on other sites More sharing options...
Pete Dowson Posted March 3, 2016 Report Share Posted March 3, 2016 Well, according to that log, FSUIPC is operating as fully registered. I don't know why you think it isn't? But I do see that the system date and time was over 4 weeks ago when that Log was produced: 63 System time = 26/01/2016 19:25:05 Was that the last time you tried loading P3D3.1, or is the date incorrect on your PC? I also see that FSUIPC didn't actually start up fully. Not sure why that is, but you should note that 4.949 is not the currently supported version. Best to download and install the current one, 4.949f, please (or even the interim update 4.949g), and try again. Pete Link to comment Share on other sites More sharing options...
birdguy Posted March 3, 2016 Author Report Share Posted March 3, 2016 I downloaded and installed version 4.949f. Then I entered my registration as follows: FSUIPC4 box (circle) selected Just enter new registration(s) box (circle) selected Entered name, email address, and KEY (in uppercase). Clicked OK Message: Thank you. Your registration has now been entered. Pressed confirm. But in the simulator it still shows as an unregistered version. The only log in the modules folder is the installation log. Here it is: Installer for FSUIPC4.DLL version 4.949f Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath"Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"AppPath"... NOT found! ... Looking in registry for FSX-SE install path: HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX Parameter"Install_Path"Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\DovetailGames\FSX Parameter"AppPath"Not there, so looking in: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0 Parameter"SetupPath"Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0 Parameter"AppPath"... NOT found! ... Looking in registry for Prepar3D v1 install path: HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D Parameter"SetupPath"Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D Parameter"AppPath"... NOT found! ... Looking in registry for Prepar3D v2 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"SetupPath"Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"AppPath"... NOT found! ... Looking in registry for Prepar3D v3 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3 Parameter"SetupPath"... >>> OK! FOUND Prepar3D v3! <<< ... SetupPath=D:\Lockheed Martin\Prepar3D v3\=========================================================== INSTALLATION FOR Prepar3D v3:SetupPath="D:\Lockheed Martin\Prepar3D v3\"Checking version of the Prepar3D v3 EXE:... Version 3.1.2.15831 (Need at least 1.0.677.0)Checking compatibility with installed SimConnect:Checking if there's already a version of FSUIPC4 installed in: D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL... No previous valid version found.Prepar3D v3 Modules folder already exists.Okay -- installed FSUIPC4 into "D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL"Looking for the current user's Application Data path:... found as "C:\Users\Noel\AppData\Roaming"Now finding \Lockheed Martin\Prepar3D v3\Prepar3D.CFG for all users, including this oneLooking in "C:\Users\All Users\AppData\Roaming" ... No Prepar3D.CFG thereLooking in "C:\Users\Default\AppData\Roaming" ... No Prepar3D.CFG thereLooking in "C:\Users\Default User\AppData\Roaming" ... No Prepar3D.CFG thereLooking in "C:\Users\Noel\AppData\Roaming"Found Prepar3D.CFG in "C:\Users\Noel\AppData\Roaming\Lockheed Martin\Prepar3D v3\Prepar3D.CFG"Now checking DLL.XML ...... There is a previous DLL.XML, checking for FSUIPC4 section.... FSUIPC4 section already exists but will be replaced. (for FSUIPC4, without Loader)... FSUIPC4 section of DLL.XML written okayNow checking for a SimConnect.XML file ...... No SimConnect.XML file found. This is okay.Looking in "C:\Users\Public\AppData\Roaming" ... No Prepar3D.CFG there"Modules\FSUIPC Documents" folder created okay!Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder: Installed "SimConnectP3D2.dll" okayNow installing additional files into the "Modules\FSUIPC Documents" folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "List of FSX and P3D controls.pdf" okay Installed "FSUIPC Lua Library.pdf" okay Installed "FSUIPC Lua Plug-Ins.pdf" okay Installed "Lua License.pdf" okay Installed "Lua Plugins for VRInsight Devices.pdf" okay Installed "LuaFileSystem.pdf" okay Installed "Example LUA plugins.zip" okay Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay Installed "Offset Mapping for PMDG 737NGX.pdf" okay Installed "Offset Mapping for PMDG 777X.pdf" okay Installed "FSUIPC4 Offsets Status.pdf" okay Installed "Profiles in Separate Files.pdf" okay=========================================================== All installer tasks completed.Registration dialog exit: selected FSUIPC REGISTERProviding FSUIPC registration dialogue ...Registration for FSUIPC4 was successful! (result code 00) *************** End of Install Log *************** There is also a log for my Quest Kodiak since I use Kodiak.exe to start my simulator for a saved flight so I can bypass the normal startup screens. The Kodiak is the only aircraft I fly in P3D. Here is that log which says FSUIPC4 is not registered. ********* FSUIPC4, Version 4.949f by Pete Dowson *********Kodiak.exe version = 3.1.2.15831Running inside Prepar3D v3 on Windows 7... Prepar3D has been renamed as "Kodiak"Module base=5AF40000User Name=""User Addr=""FSUIPC4 not user registeredWIDEFS7 not user registered, or expired 47 System time = 03/03/2016 07:21:15 47 FLT path = "C:\Users\Noel\Documents\Prepar3D v3 Files\" 47 ------ Module Version Check ------ 47 acontain.dll: 3.1.2.15831 62 api.dll: 3.1.2.15831 62 controls.dll: 3.1.2.15831 62 fs-traffic.dll: 3.1.2.15831 62 G3D.dll: 3.1.2.15831 62 language.dll: 3.1.2.15831 62 sim1.dll: 3.1.2.15831 62 visualfx.dll: 3.1.2.15831 62 weather.dll: 3.1.2.15831 62 window.dll: 3.1.2.15831 62 ---------------------------------- 62 Trying D:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll 62 Found it: trying to connect 62 FS path = "D:\Lockheed Martin\Prepar3D v3\" 172 LogOptions=00000000 00000001 172 ------------------------------------------------------------------- 172 ------ Setting the hooks and direct calls into the simulator ------ 172 --- CONTROLS timer memory location obtained ok 172 --- SIM1 Frictions access gained 172 ASN active function link set 172 Hook Error: can't find .1526660768 in SIM1.dll 172 Hook Error: can't find .1526660768 in VISUALFX.dll 172 --- FS Controls Table located ok 172 --- Installed Mouse Macro hooks ok. 172 Wind smoothing is by ASN, not FSUIPC 172 Will switch smoothing action when ASN starts/stops 172 --- All links okay (except older global weather setting method) 172 ------------------------------------------------------------------- 172 SimConnect_Open succeeded: waiting to check version okay 172 Trying to use SimConnect Prepar3D 60060 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.1.3.1 (SimConnect: 3.1.0.0) 60060 Initialising SimConnect data requests now 60060 FSUIPC Menu entry added 60060 C:\Users\Noel\Documents\Prepar3D v3 Files\ZZZ_Kodiak.fxml 60060 D:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Kodiak\Kodiak.air 163396 System time = 03/03/2016 07:23:58, Simulator time = 07:22:15 (15:22Z) 164410 Starting everything now ... 164488 Ready for ASN WX radar 165751 Advanced Weather Interface Enabled 183457 Sim stopped: average frame rate for last 20 secs = 31.5 fps 218417 === NOTE: not calling SimConnect_Close ... 219416 System time = 03/03/2016 07:24:54, Simulator time = 07:22:36 (15:22Z) 219416 *** FSUIPC log file being closedMinimum frame rate was 27.9 fps, Maximum was 56.8 fpsMinimum available memory recorded was 1461MbAverage frame rate for running time of 27 secs = 36.5 fpsMemory managed: 15 Allocs, 15 Freed********* FSUIPC Log file closed *********** What do I do now? Noel Link to comment Share on other sites More sharing options...
birdguy Posted March 3, 2016 Author Report Share Posted March 3, 2016 Anticipating you might want to look at the normal startup P3D log here it is: ********* FSUIPC4, Version 4.949f by Pete Dowson ********* Prepar3D.exe version = 3.1.2.15831 Running inside Prepar3D v3 on Windows 7 Module base=5BF60000 User Name="Noel Sivertson" User Addr="birdguy@cableone.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 63 System time = 03/03/2016 07:45:27 63 FLT path = "C:\Users\Noel\Documents\Prepar3D v3 Files\" 63 ------ Module Version Check ------ 63 acontain.dll: 3.1.2.15831 63 api.dll: 3.1.2.15831 63 controls.dll: 3.1.2.15831 63 fs-traffic.dll: 3.1.2.15831 63 G3D.dll: 3.1.2.15831 63 language.dll: 3.1.2.15831 63 sim1.dll: 3.1.2.15831 63 visualfx.dll: 3.1.2.15831 63 weather.dll: 3.1.2.15831 63 window.dll: 3.1.2.15831 63 ---------------------------------- 63 Trying D:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll 63 Found it: trying to connect 78 FS path = "D:\Lockheed Martin\Prepar3D v3\" 203 ---------------------- Joystick Device Scan ----------------------- 203 Product= Saitek X52 Flight Control System 203 Manufacturer= Saitek 203 Vendor=06A3, Product=075C (Version 1.0) 203 Serial Number= 203 ------------------------------------------------------------------- 219 LogOptions=00000000 00000001 234 ------------------------------------------------------------------- 234 ------ Setting the hooks and direct calls into the simulator ------ 234 --- CONTROLS timer memory location obtained ok 234 --- SIM1 Frictions access gained 234 ASN active function link set 234 Hook Error: can't find .1543569056 in SIM1.dll 234 Hook Error: can't find .1543569056 in VISUALFX.dll 234 --- FS Controls Table located ok 234 --- Installed Mouse Macro hooks ok. 234 Wind smoothing is by ASN, not FSUIPC 234 Will switch smoothing action when ASN starts/stops 234 --- All links okay (except older global weather setting method) 234 ------------------------------------------------------------------- 234 SimConnect_Open succeeded: waiting to check version okay 234 Trying to use SimConnect Prepar3D 58969 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.1.3.1 (SimConnect: 3.1.0.0) 58969 Initialising SimConnect data requests now 58969 FSUIPC Menu entry added 58984 C:\Users\Noel\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml 58984 D:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air 73367 === NOTE: not calling SimConnect_Close ... 74366 System time = 03/03/2016 07:46:41 74366 *** FSUIPC log file being closed Minimum frame rate was 32768.0 fps, Maximum was 0.0 fps Minimum available memory recorded was 32768Mb Memory managed: 4 Allocs, 4 Freed ********* FSUIPC Log file closed *********** Noel Link to comment Share on other sites More sharing options...
Pete Dowson Posted March 3, 2016 Report Share Posted March 3, 2016 There is also a log for my Quest Kodiak since I use Kodiak.exe to start my simulator for a saved flight so I can bypass the normal startup screens. ... Running inside Prepar3D v3 on Windows 7 ... Prepar3D has been renamed as "Kodiak" There's the problem. You aren't running Prepar3D but "Kodiak". Why? Renaming the main object program creates havoc not only for FSUIPC but many other programs which relay on seeing the correct process name! Rename it back to Prepar3D.exe, or (less favourably) rename your .KEY file accordingly, same as your INI and LOG files. This latter method, for renamed EXEs, is described in "Multiple INI Files", page 48 of the FSUIPC Advanced User's document. Anyway, you can bypass the start up screen by adding SHOW_OPENING_SCREEN=0 to the [sTARTUP] section of your Prepar3D.cfg file (as in FSX.). You also appear to have another (bigger) problem with a corrupted P3D install, causing these errors: 172 Hook Error: can't find .1526660768 in SIM1.dll 172 Hook Error: can't find .1526660768 in VISUALFX.dll though it is vaguely possible this could be derived from the same mis-naming action. Pete Pete Link to comment Share on other sites More sharing options...
Pete Dowson Posted March 3, 2016 Report Share Posted March 3, 2016 Anticipating you might want to look at the normal startup P3D log here it is: Confirming that all is well if you refrain from renaming the EXE, except thaat those errors are still present: 234 Hook Error: can't find .1543569056 in SIM1.dll 234 Hook Error: can't find .1543569056 in VISUALFX.dll I'm wondering if that's either due to an out of date version of ASN, or the wrong order of loading DLLs. The ASN entry in that file should be last, something which, when run, ASN normally detects and puts right (telling you to restart FS). Maybe it only does that if you run it after FS. Pete Link to comment Share on other sites More sharing options...
birdguy Posted March 3, 2016 Author Report Share Posted March 3, 2016 Thanks Pete. The renaming of the DLL, ini, and key files worked. I went that way because I have some more aircraft I want to start directly from my desktop. I have an .EXE, a .cfg, and a saved file for each such aircraft that I want to start by clicking on a desktop icon without having to go through the default selection screen. I click on the icon and it brings me directly to the aircraft sitting in a parking space at my home airport. Thanks again. Noel Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now