FSUIPC and P3D v4 (Lost functionality)

[AngeloCosma]

Hello Pete, I am noticing something amiss here and am asking for clarification. Back in v3 I had FSUIPC setup as follow. 

Rudder Axis Direct Calibration (Yaw) Min Center Max Values set.

Second, I had another axis (my spare Joystick) as Tiller. This was also set direct and calibrated min center max. No assignments were conflicting and I made sure duplicates did not exist in P3D UI control settings.

This above achieved the desired effect. Below 35kts, the rudder would manipulate the nosewheel at a limited angle, and joystick would tiller the nosewheel to what would be expected. 

 

Now in v4, the exact same setup does not yield the same effect. The rudder can command full hard turns just like the tiller can, I dont see any null effect on the steering when using my feet to make subtle adjustments while taxiing. 

Any ideas?

[Thomas Richter]

Hi,

there are not much information you give other than using P3Dv4 and FSUIPC.

Minimum needed information is always the versions are used, FS & FSUIPC. In case you have a problem with setting up axes you need to make sure Controls are switched OFF in FS to make sure there are not double assigned axes.

Please send your FSUIPC5.ini file and FSUIPC5.log file (after a short session), best as zip file.

Thomas

[AngeloCosma]

Double Post.

[AngeloCosma]

On 8/29/2017 at 0:20 PM, Thomas Richter said:

Hi,

there are not much information you give other than using P3Dv4 and FSUIPC.

Minimum needed information is always the versions are used, FS & FSUIPC. In case you have a problem with setting up axes you need to make sure Controls are switched OFF in FS to make sure there are not double assigned axes.

Please send your FSUIPC5.ini file and FSUIPC5.log file (after a short session), best as zip file.

Thomas

FS version is P3D v4.0

FSUIPC log pasted below. 

********* FSUIPC5, Version 5.103 (26th June 2017) by Pete Dowson *********

1884688 System time = 30/08/2017 17:35:15, Simulator time = 17:33:28 (00:33Z)
  1884688 FLT path = "C:\Users\Angelo\Documents\Prepar3D v4 Files\"
[Continuation log requested by user]
Running inside Prepar3D v4 on Windows 10
Module base=7FFA2E400000
  3514485 LUA.4: #1 Reverse Thrust
  3514516 LUA.4: #2 Reverse Thrust
  3515203 LUA.4: #2 Forward Thrust
  3517657 LUA.4: #2 Reverse Thrust
  3517750 LUA.4: #2 Forward Thrust
  3525219 LUA.4: #2 Reverse Thrust
  3540813 LUA.4: #1 Forward Thrust
  3540828 LUA.4: #2 Forward Thrust
  3697625 Sim stopped: average frame rate for last 1813 secs = 46.0 fps
  3697625    Max AI traffic was 49 aircraft (Deleted 0)
  3700953 === Closing session: waiting for DLLStop to be called ...
  3717422 === DLLStop called ...
  3717422 === Closing external processes we started ...
  3718422 === About to kill any Lua plug-ins still running ...
  3718563 Lua threads being terminated:
  3718563       0 = "C:\Lockheed Martin\Prepar3D v4\Modules\Throttle_Idle_1.lua"
  3718719 LUA: "C:\Lockheed Martin\Prepar3D v4\Modules\Throttle_Idle_1.lua": killed
  3718719       1 = "C:\Lockheed Martin\Prepar3D v4\Modules\Throttle_Idle_2.lua"
  3718875 LUA: "C:\Lockheed Martin\Prepar3D v4\Modules\Throttle_Idle_2.lua": killed
  3718875       2 = "C:\Lockheed Martin\Prepar3D v4\Modules\Throttle_Idle_3.lua"
  3719016 LUA: "C:\Lockheed Martin\Prepar3D v4\Modules\Throttle_Idle_3.lua": killed
  3719016       3 = "C:\Lockheed Martin\Prepar3D v4\Modules\Throttle_Idle_4.lua"
  3719172 LUA: "C:\Lockheed Martin\Prepar3D v4\Modules\Throttle_Idle_4.lua": killed
  3719172       4 = "C:\Lockheed Martin\Prepar3D v4\Modules\ThrottleManager.lua"
  3719328 LUA: "C:\Lockheed Martin\Prepar3D v4\Modules\ThrottleManager.lua": killed
  3719328 === Closing global Lua thread
  3720328 === About to kill my timers ...
  3720532 === Restoring window procs ...
  3720532 === Unloading libraries ...
  3720532 === stopping other threads ...
  3720532 === ... Button scanning ...
  3720625 === ... Axis scanning ...
  3720719 === Releasing joystick devices ...
  3720719 === Freeing macro memory
  3720719 === Removing any offset overrides
  3720719 === Clearing any displays left
  3720719 === Calling SimConnect_Close ...
  3722828 === SimConnect_Close done!
  3722828 === AI slots deleted!
  3722828 === Freeing button memory ...
  3722828 === Closing my Windows ...
  3722828 === Freeing FS libraries ...
  3723828 === Closing devices ...
  3723828 === Closing the Log ... Bye Bye! ...
  3723828 System time = 30/08/2017 18:05:55, Simulator time = 18:03:41 (01:03Z)
  3723828 *** FSUIPC log file being closed
Minimum frame rate was 19.3 fps, Maximum was 64.2 fps
Average frame rate for running time of 3538 secs = 45.8 fps
Maximum AI traffic for session was 49 aircraft
Memory managed: 1697 Allocs, 1696 Freed
********* FSUIPC Log file closed ***********
 

-------------------------- FSUIPC INI ------------------------------------

 

[General]
UpdatedByVersion=5103
History=CRVNYJGNCOABXZCYGMF0Z
AxesWrongRange=No
TCASid=Flight
TCASrange=40,3
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
ThreadAffinityMask=x0
LuaAffinityMask=x0
InitDelay=0
GetNearestAirports=Yes
LogOptionProtect=Yes
TimeForLuaClosing=2
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
Console=No
InitDelayDevicesToo=No
Annotate=Yes
NewInterceptTextMenu=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
FixControlAccel=No
FixMachSpeedBug=No
AutoScanDevices=Yes
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
DelayedMouseLookZoom=No
WideLuaGlobals=Yes
FSVersionUsed="Lockheed Martin® Prepar3D® v4",4.0.28.21686
SimConnectUsed=4.0.0.0

[WideServer]
WideFSenabled=Yes

[Auto]
1=Lua Throttle_Idle_1
2=Lua Throttle_Idle_2
3=Lua Throttle_Idle_3
4=Lua Throttle_Idle_4
5=Lua ThrottleManager

[Traffic Limiter]
AirportPreference=50
PlannedAirportsPreference=50
GroundPreference=50
NearerPreference=50
TargetFrameRate=0
TrafficLimit=0

[JoyNames]
AutoAssignLetters=No
0=Saitek Pro Flight Throttle Quadrant
0.GUID={AAD310E0-5572-11E5-8003-444553540000}
4=Logitech G13 Joystick
4.GUID={DA58C850-CAE2-11E6-8002-444553540000}
5=CH FLIGHTSTICK PRO
5.GUID={C9AF7CD0-5FA2-11E5-8001-444553540000}
1=AGRONN B737 Yoke V2.1
1.GUID={BC50ED30-97AF-11E6-8001-444553540000}
2=Saitek Pro Flight Throttle Quadrant
2.GUID={AAD310E0-5572-11E5-8009-444553540000}
3=PFC MFD Rudder Pedals
3.GUID={AAD310E0-5572-11E5-8006-444553540000}

[Axes]
PollInterval=10
RangeRepeatRate=10
0=0Y,256,D,9,0,0,0    -{ DIRECT: Throttle1 }-
1=0Z,256,D,11,0,0,0    -{ DIRECT: Throttle3 }-
2=2X,256,D,10,0,0,0    -{ DIRECT: Throttle2 }-
3=2Y,256,D,12,0,0,0    -{ DIRECT: Throttle4 }-
4=5X,256,D,36,0,0,0    -{ DIRECT: SteeringTiller }-

[Buttons]
PollInterval=10
ButtonRepeat=20,10
1=P0,2,K57,8     -{Key press: 9}-
2=U0,2,K49,8     -{Key press: 1}-
3=P0,3,K48,8     -{Key press: 0}-
4=U0,3,K49,8     -{Key press: 1}-
5=P1,0,K79,9     -{Key press: shft+O}-
6=P0,1,K79,9     -{Key press: shft+O}-
7=R1,3,C65607,0     -{ELEV_TRIM_DN}-
9=R1,4,C65615,0     -{ELEV_TRIM_UP}-
11=P2,5,K71,8     -{Key press: G}-
20=P0,7,CL5:T,1     -{LuaToggle ThrottleManager}-
21=P0,8,CL5:T,3     -{LuaToggle ThrottleManager}-
22=P2,6,CL5:T,2     -{LuaToggle ThrottleManager}-
23=P2,7,CL5:S,4     -{LuaSet ThrottleManager (Flag 4)}-
24=P2,4,K71,8     -{Key press: G}-
25=P0,5,K112,11     -{Key press: ctl+shft+F1}-
26=P2,3,K76,11     -{Key press: ctl+shft+L}-
27=P0,4,K113,11     -{Key press: ctl+shft+F2}-
28=P2,1,K114,11     -{Key press: ctl+shft+F3}-
29=P2,0,K115,11     -{Key press: ctl+shft+F4}-

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No
Port=COM0
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=

[GPSout2]
GPSoutEnabled=No
Port=<none set>
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=

[Sounds]
Path=C:\Lockheed Martin\Prepar3D v4\Sound\
Device1=Primary Sound Driver
Device2=Speakers (Realtek High Definition Audio)
Device3=LG ULTRAWIDE (High Definition Audio Device)
Device4=Speakers (USB Audio Device)
Device5=Realtek Digital Output (Realtek High Definition Audio)

[Profile.717]
1=TFDi Design 717 AirTran

[Buttons.717]
0=P1,1,C74115,0     -{Custom control: <74115>}-
1=P1,2,C74119,0     -{Custom control: <74119>}-
2=P0,5,C74150,0     -{Custom control: <74150>}-
3=P0,4,C74150,0     -{Custom control: <74150>}-
4=P2,0,C74151,0     -{Custom control: <74151>}-
5=P2,1,C74151,0     -{Custom control: <74151>}-
6=R1,3,C74108,0     -{Custom control: <74108>}-
7=U1,3,C74110,0     -{Custom control: <74110>}-
8=R1,4,C74109,0     -{Custom control: <74109>}-
9=U1,4,C74111,0     -{Custom control: <74111>}-
10=R0,7,C65966,0     -{THROTTLE1_DECR}-
11=U0,7,C65967,0     -{THROTTLE1_CUT}-
12=R2,6,C65971,0     -{THROTTLE2_DECR}-
13=U2,6,C65972,0     -{THROTTLE2_CUT}-

[Keys]
1=49,10,74056,0     -{ctl+1: Press=Custom control: <74056> }-
2=50,10,74060,0     -{ctl+2: Press=Custom control: <74060> }-
3=51,10,74061,0     -{ctl+3: Press=Custom control: <74061> }-
4=52,10,74062,0     -{ctl+4: Press=Custom control: <74062> }-
5=53,10,74063,0     -{ctl+5: Press=Custom control: <74063> }-
6=54,10,74064,0     -{ctl+6: Press=Custom control: <74064> }-
7=55,10,74065,0     -{ctl+7: Press=Custom control: <74065> }-
8=56,10,74058,0     -{ctl+8: Press=Custom control: <74058> }-
9=57,10,74059,0     -{ctl+9: Press=Custom control: <74059> }-

[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Throttle2=-15864,-512,512,16255/40
Throttle3=-15864,-512,512,16383/40
Throttle4=-15994,-512,512,16383/40
Throttle1=-15864,-512,512,16255/40
SlopeThrottle1=2
SlopeThrottle2=2
Aileron=-16383,0,0,16383
SlopeAileron=2
Elevator=-15327,0,0,16052
SlopeElevator=2
SlopeThrottle3=2
SlopeThrottle4=1
Rudder=-16383,-565,591,16383
SlopeRudder=2
SteeringTiller=-13363,1024,1755,16383
SlopeSteeringTiller=2

[LuaFiles]
1=Throttle_Idle_1
2=Throttle_Idle_2
3=Throttle_Idle_3
4=Throttle_Idle_4
5=ThrottleManager

[AngeloCosma]

Resolved.

 

Silly me, for whatever odd reason rudder axis was still set or got reset somehow in P3D axis assignments. All is well now thanks. 

[Thomas Richter]

Hi,

you should also update to latest version, Install_FSUIPC5112.zip

Thomas