Jump to content
The simFlight Network Forums

Imposible to get Lvars


Recommended Posts

hi, i'm a beginner in P3dv4, just instal last week, and FSUIPC 5.15 register few days later.

I'm trying o get the Lvars from add on Cessna A2A 172, but I have nothing in the windows log when I put the touch combinaison which I had define... 

Some people on french simulation forum told me to check the FSUIPC.ini,  but it is not funded, despite hidden folders and hidden extensions ...

in my modules folder, i'va only 3 files: FSUIPC Instal.log, FSUIPC5.DLL and FSUIPC5.key. No FSUIPC5.ini.  I've try to unistal P3Dv4, A2A cessna and FSUIPC5, but no result.

 

Could you help me Pete? Thank you

 

I'm on a new PC, w10.

Best regards

Link to comment
Share on other sites

3 hours ago, AurelienF38 said:

I'm trying o get the Lvars from add on Cessna A2A 172, but I have nothing in the windows log when I put the touch combinaison which I had define... 

What "windows log"?. What "touch conbination" are you using.

3 hours ago, AurelienF38 said:

Some people on french simulation forum told me to check the FSUIPC.ini,  but it is not funded, despite hidden folders and hidden extensions ...

It would be FSUIPC5.INI, and it always exists if you have ever run FSUIPC5.

What did you hope to find in that? It's a record of your settings in fSUIPC5.

3 hours ago, AurelienF38 said:

in my modules folder, i'va only 3 files: FSUIPC Instal.log, FSUIPC5.DLL and FSUIPC5.key. No FSUIPC5.ini. 

If FSUIPC5 has ever run there would be an FSUIPC5.LOG file as well as an FSUIPC5.INI file. It creates both as soon as it runs. . So, it seems that FSUIPC5 is never running!

Is there an FSUIPC entry in the P3D4 AddOns menu item?

I think you need to show me that Install LOG so I can check the Install stage.

Pete

 

 

Link to comment
Share on other sites

12 hours ago, Pete Dowson said:

What "windows log"?. What "touch conbination" are you using.

Sorry, I would mean "console log". I have use differtents combinations to test if the probleme was that, but no change. For exemple today I try with "tab+<>key"

a7vofNI.jpg

rvMOsDt.jpg

xEEZCVy.jpg

It would be FSUIPC5.INI, and it always exists if you have ever run FSUIPC5.

If FSUIPC5 has ever run there would be an FSUIPC5.LOG file as well as an FSUIPC5.INI file. It creates both as soon as it runs. . So, it seems that FSUIPC5 is never running!

Is there an FSUIPC entry in the P3D4 AddOns menu item?

AIJ3JYO.jpg

This is my module folder after running P3D and FSUIPC5... with hidden folders and hidden extensions checked

2QTuo7a.jpg

What did you hope to find in that? It's a record of your settings in fSUIPC5.

I dont know; it's a membrer forum who ask me this folder to see something...

I think you need to show me that Install LOG so I can check the Install stage.

This is the install LOG:

Installer for FSUIPC5.DLL version 5.15


Looking in registry for Prepar3D v4 install path:
     HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v4
     Parameter"AppPath"
... >>>  OK! FOUND Prepar3D v4!  <<< ...
     AppPath=C:\Program Files\Lockheed Martin\Prepar3D v4\
===========================================================

INSTALLATION FOR Prepar3D v4:
AppPath="C:\Program Files\Lockheed Martin\Prepar3D v4\"
Checking version of the Prepar3D v4 EXE:
... Version 4.3.29.25520  (Need at least 4.1.0.0)
Checking if there's already a version of FSUIPC5 installed as:
       C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.DLL
... Version 5.150 found.
C:\Program Files\Lockheed Martin\Prepar3D v4\Modules folder already exists.
Okay -- installed FSUIPC5 into "C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.DLL"
Looking for the current user's Application Data path: 
... found as "C:\Users\fryau\AppData\Roaming"
Now finding \Lockheed Martin\Prepar3D v4\Prepar3D.CFG for all users, including this one
Looking in "C:\Users\All Users\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Default\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\fryau\AppData\Roaming"
Found Prepar3D.CFG in "C:\Users\fryau\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC5 section.
... FSUIPC5 section already exists but will be replaced.
... FSUIPC5 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
Looking in "C:\Users\Public\AppData\Roaming"
 ... No Prepar3D.CFG there
Attempt to set the ACL entries for Modules access permissions failed, error = 1332
"Modules\FSUIPC Documents" folder already exists.
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC5 User Guide.pdf" okay
   Installed "FSUIPC5 for Advanced Users.pdf" okay
   Installed "The 2016 List of FSX and P3D Controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
   Installed "FSUIPC5 History.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "Offset Mapping for PMDG 777X.pdf" okay
   Installed "Offset Mapping for PMDG 747QOTSII.pdf" okay
===========================================================

All installer tasks completed.
Registration dialog exit: selected  BOTH REGISTER
Providing FSUIPC registration dialogue ...
Providing WIDEFS registration dialogue ...
Registration for FSUIPC5 and WideFS was cancelled or failed! (result code 80)

*************** End of Install Log ***************
 

Thank you

 

12 hours ago, Pete Dowson said:

 

 

Link to comment
Share on other sites

9 minutes ago, AurelienF38 said:

Sorry, I would mean "console log". I have use differtents combinations to test if the probleme was that, but no change. For exemple today I try with "tab+<>key"

You posted pictures which appear to be complete screen grabs with images far too small for me to read. Please do not do that! Words are better, just type them.

The only thing the pictures really tell me is that FSUIPC is installed okay, and is running  -- so there MUST be an FSUIPC5.INI file and an FSUIPC5.LOG.  Either that or your Modules folder isn't set to allow files to be written without the program being "run as administrator"

15 minutes ago, AurelienF38 said:

This is the install LOG:

Okay. That may show the problem:

Attempt to set the ACL entries for Modules access permissions failed, error = 1332

This is a problem which only exists since Windows 10, and only when you let P3D install in Windows\Program Files. That folder is protected unless you run "as administrator". Now, for most installations, this isn't a problem because provided you run the Installer "as administrator" it is able to change the permissions (just on the Modules folder) automatically. But on just a few systems it is prevented and gets that Error 1332.

So, first, if you didn't run the Installer by right-clicking and selecting "run as administrator", please do that now (no need to re-enter registration, just say not now).

If there still is no FSUIPC5.LOG or INI after you run P3D, I can only suggest that you edit the permissions on the Modules folder yourself:  Allow full access by right clicking on the folder properties:  Security-->add Everyone as a user name, then check 'Full Control' access below.

Back to the matter of the LVar logging. Rather than tell me the key combination you've chosen, I need to know what you've assigned to that key combination.

Pete

 

 

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.