Jump to content
The simFlight Network Forums

[RESOLU] Fsuipc7- problem button


Choco
 Share

Recommended Posts

Bonjour,

I assigned functions to my Xbox controller which is well recognized, I also assigned 2 axes (in test)
but when i am in mfs20 , the axes and buttons those do not respond.
it's been several years since I used fsuipc, but I may have forgot a setting?

2) Si je veux recalibrer mes autres joystick dans Fsuipc 7, est-ce que je dois avant supprimer tout ce qui est calibrer dans le menu commande MFS 20?

is my .ini file

 

 

[Sounds]
Path=Sound\Sound\Sound\Sound\Sound\Sound\
Device1=Primary Sound Driver
Device2=Haut-parleurs (Realtek High Definition Audio)
Device3=C32F391 (High Definition Audio Device)
Device4=C32HG7x (High Definition Audio Device)

[General]
UpdatedByVersion=7000b
UseSystemTime=No
JoystickTimeout=20
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
UseProfiles=Yes
WideLuaGlobals=Yes
InvokeFSUIPCOptionsKey=70,12
AxesWrongRange=No
TCASid=Flight
TCASrange=40,3
AxisCalibration=No
DirectAxesToCalibs=No
AxisIntercepts=No
DontResetAxes=No
ThreadAffinityMask=x0
LuaAffinityMask=x0
LogOptionProtect=Yes
AutoConnectToSim=Yes
AutoExitWithSim=Yes
TimeForLuaClosing=2
WeatherReadFactor=2
WeatherRewriteSeconds=1
TrafficStallTime=1
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
ComReadLoopTime=20
Window=1470,760,1970,860
Console=No
ConsoleWindowTopMost=No
ConsoleWindow=51,51,963,568
FSVersionUsed="KittyHawk",11.0.282174.999
SimConnectUsed=11.0.62651.3

[JoystickCalibration]
RudderBlendLowest=1

[Axes]
PollInterval=10
RangeRepeatRate=10
0=EX,256,F,65695,0,0,0    -{ TO SIM: AILERON_SET }-
1=EY,256,F,65762,0,0,0    -{ TO SIM: AXIS_ELEVATOR_SET }-


[Buttons]
PollInterval=25
ButtonRepeat=20,10
0=PE,38,K103,8     -{Key press: Num7}-
1=PE,34,K105,8     -{Key press: Num9}-
2=PE,8,K101,8     -{Key press: Num5}-
3=PE,32,K82,8     -{Key press: r}-
4=PE,36,K70,8     -{Key press: f}-
5=PE,6,K83,8     -{Key press: s}-
6=PE,7,K87,8     -{Key press: w}-
7=PE,2,K65,8     -{Key press: a}-
8=PE,1,K68,8     -{Key press: d}-
9=PE,0,K98,8     -{Key press: Num2}-

Here : 10=PE.......   -{Key press: Num8}-
I have the button: B where I had assigned the key: num8
who does not want to show, I do not understand the reason.

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No

[GPSout2]
GPSoutEnabled=No

[WideServer]
WideFSenabled=Yes

[JoyNames]
1=Throttle - HOTAS Warthog
1.GUID={1B6748D0-E231-11EA-8002-444553540000}
2=T-Rudder
2.GUID={67A22520-E070-11EA-8001-444553540000}
3=F16 MFD 1
3.GUID={692AE140-37A9-11EA-8001-444553540000}
4=Alpha Flight Controls
4.GUID={1B6748D0-E231-11EA-8001-444553540000}
A=Throttle - HOTAS Warthog
A.GUID={1B6748D0-E231-11EA-8002-444553540000}
B=T-Rudder
B.GUID={67A22520-E070-11EA-8001-444553540000}
C=F16 MFD 1
C.GUID={692AE140-37A9-11EA-8001-444553540000}
D=Alpha Flight Controls
D.GUID={1B6748D0-E231-11EA-8001-444553540000}
5=Controller (Xbox One For Windows)
5.GUID={C8748F00-EEA4-11E9-8006-444553540000}
E=Controller (Xbox One For Windows)
E.GUID={C8748F00-EEA4-11E9-8006-444553540000}

 

Link to comment
Share on other sites

2 hours ago, Choco said:

I assigned functions to my Xbox controller which is well recognized, I also assigned 2 axes (in test)
but when i am in mfs20 , the axes and buttons those do not respond.

I've checked those assignments here and they seem to work fine. Could you activate Axes Controls logging, load an aircraft and move both axes full in each direction and then show me your log file.

2 hours ago, Choco said:

Here : 10=PE.......   -{Key press: Num8}-
I have the button: B where I had assigned the key: num8
who does not want to show, I do not understand the reason.

Does this button register inthe FSUIPC7 button assignment window when you press it? 

Quote

If I want to recalibrate my other joysticks in Fsuipc 7, must I first delete everything that
is calibrated in the MFS 20 command menu?

Yes, if you don't want multiple assignments. It has been suggested to create a 'null' profile (with no assignments) in MSFS, and use that when using FSUIPC7. Note that there are currently many more assignments available in MSFS, so you still may want to assign there for some that are either currently unavailable or not working via SimConnect (e.g. to control views).

Link to comment
Share on other sites

Thanks for your help.
I restarted the disconnected PC and reconnected the Xbox controller.
launch Fsuipc7 and the simulation and there strangely everything worked correctly.
For the B key: I had checked an inappropriate box.
Everything is ok now.
I will test the assignment of my yoye and hotas-thrusmaster with fsuipc, if I have any problems I will let you know.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.