Zenith ch701 avionic master switch

[Bqboki]

Hello,

the 6th switch with label radio avionics master, I ve been trying for hours to get this switch to work with no luck.

Activating/desactivating the switch and there is no command line on the console

i've tried:

avionics master set

avionics master 1 on off

avionics master 2 on off

toggle avionics master

 

so far nothing work.

[John Dowson]

10 hours ago, Bqboki said:

Activating/desactivating the switch and there is no command line on the console

i've tried:

avionics master set

avionics master 1 on off

avionics master 2 on off

toggle avionics master

 

so far nothing work.

If the standard controls don't work, and you can't see any events logged when you  toggle the avionics in the UI, then try listing the available lvars to see if any are appropriate. Use the Add-ons -> WASM -> List Lvars menu option.
If there are no lvars, you could try looking for hvars, but that is quite complex and involves inspecting the aircraft code using the dec mode facilities.

Unfortunately I do not have this add-on and so cannot look into this for you.

John

[Bqboki]

Quote

AIRLINER_MCDU_CURRENT_FPLN_WAYPOINT = -1.000000
AS530_Default_MapZoomRange = 0.000000
AS530_HIDDEN = 0.000000
AS530_Map_MapShowCursor = 0.000000
AS530_Map_MapZoomRange = 5.000000
AS530_ScreenLuminosity = 1.000000
AS530_SelectedSource = 0.000000
AS530_State = 2.000000
AS530_Waypoint_Map_MapShowCursor = 0.000000
AS530_Waypoint_Map_MapZoomRange = 5.000000
ASVigilus_Brightness = 0.000000
ASVigilus_Brightness_Manual = 0.000000
ASVigilus_Fuel_Unit = 0.000000
ASVigilus_Pressure_Unit = 0.000000
ASVigilus_Temperature_Unit = 0.000000
Aera_Brightness_Manual = 0.000000
ENGINE_HIGHRPM_TIMELOGGER = 0.000000
ENGINE_INIT = 1.000000
ENGINE_OVERHEAT_MULTIPLIER = 1.000000
FLIGHTPLAN_USE_DECEL_WAYPOINT = 0.000000
GMA340_ANNUNCIATOR_TEST = 0.000000
GNS530_USE_TRAFFIC_LAURIN = 0.000000
GNS_Brightness = 0.145000
Glasscockpit_DmeSource = 1.000000
Glasscockpits_FPLHaveDestination = 0.000000
Glasscockpits_FPLHaveOrigin = 0.000000
HUD_AP_SELECTED_ALTITUDE = 0.000000
HUD_AP_SELECTED_SPEED = 0.000000
HourMeter_ScreenLuminosity = 1.000000
HourMeter_State = 2.000000
INSTRUMENT_Altimeter_0 = 1013.250011
LIGHTING_LANDING_1 = 1.000000
LIGHTING_NAV_1 = 1.000000
LIGHTING_PANEL_1 = 1.000000
LIGHTING_STROBE_1 = 1.000000
LOCAL_milliBar_to_inHg = 0.000000
MAP_SHOWN_FLIGHTPLAN_INDEX = 0.000000
MAP_SHOW_TEMPORARY_FLIGHT_PLAN = 0.000000
Map_BugIndicator_Mode = 0.000000
PFD_BRG1_Source = 0.000000
PFD_BRG2_Source = 0.000000
PFD_CDI_Source = 1.000000
PMS50_GNS530_MSG_VCALC_APPR = 0.000000
PMS50_GNS530_MSG_VCALC_ARR = 0.000000
RPM_CRUISE = 4500.000000
RPM_HIGH = 5000.000000
RPM_IDLE = 1200.000000
RPM_MAX = 5800.000000
TEMPERATURE_ENGINE_CURRENT = 58.504297
TEMPERATURE_ENGINE_RATE = -0.585043
TEMPERATURE_ENGINE_RATE_MULTIP_HIGHRPM = 1.000000
TEMPERATURE_ENGINE_STEP = -0.035103
TEMPERATURE_ENGINE_TARGET = 58.504297
TEMPERATURE_STEP_BASE = 0.060000
UPDATE_RATE = 10.000000
XMLVAR_ENGINE_Lever_Choke_Pulled = 0.000000
XMLVAR_ElevatorTrim_1_SwitchStateTimer = 0.000000
XMLVAR_ElevatorTrim_Switch_1 = 1.000000
XMLVAR_LeverThrottleHidden1 = 0.000000
XMLVAR_Magneto_Starter_IsHeld = 0.000000
attitude_bank_error_pilot_01 = 0.000000
attitude_erectionrate_pilot_01 = 4.000000
attitude_init_pilot_01 = 1.000000
attitude_pilot_01_caged = 0.000000
attitude_pitch_error_pilot_01 = 0.000000
attitude_updaterate_pilot_01 = 30.000000
attitude_zeroed_pilot_01 = 0.000000
isCompassDisplayed = 0.000000
isDataFieldActive = 0.000000
needle_adi_bank_lastknown_pilot_01 = 0.000000
needle_adi_bank_pilot_01 = 29.000000
needle_adi_pitch_lastknown_pilot_01 = 0.000000
needle_adi_pitch_pilot_01 = -20.000000

 

That's all i got in lvars, can't find anything about master avionics. Maybe devs forgot to code this command switch.

[John Dowson]

7 minutes ago, Bqboki said:

That's all i got in lvars, can't find anything about master avionics.

No, nothing there thar looks useful.
Did you try the Avionics Master 1/2 Set controls? Maybe worth a try. And I presume that you are giving the correct argument (0 for off,  1 for on) with the ....Set controls...

You could try writing to the offsets (0x2E80 or 0x3103), but I think these use the Avionics Master Set control, so if that isn't working, I doubt very much if updating the offset will work either.

Sorry, but I think you need to contact support for the a/c in question - is it from SimWorksStudios? Under 'known issues', it does say 'As the aircraft uses default simulator functions for its electrical systems, we are currently limited by its capabilities', which suggests that it is using the default avionics supplied by MSFS, which is working - at least in many other aircraft (although I haven't checked this since the latest SU6 update, but I presume still woeking...).

Sorry I can't be of more help.

John

[Mikced1976]

Did you ever find a solution to this? I am also trying to map the Radio switch in the Zenith 701 without luck. First aircraft ever I see this problem after so many years with payware aircraft. Ofter the general ”Avionics master” work or there is a relevant LVAR to use. 

[John Dowson]

As i don't have this aircraft I cannot investigate any further. Someone also asked about this on the Asobo forums but with no response. May be worth asking about this on the SimWorks forums/support.

John