Ron Attwood Posted April 2 Report Share Posted April 2 J=<< MISSING JOYSTICK >> << MISSING JOYSTICK >> K=<< MISSING JOYSTICK >> << MISSING JOYSTICK >> H=<< MISSING JOYSTICK >> << MISSING JOYSTICK >> I've seen this for some time now and although I can detect nothing untoward the .ini file seems to think it's significant. Every pirce of kit attached to the sim is mentioned and I haven't discarded anything. It's not important, so finish your coffee first. .😁 .ini attached EDIT: Just remembered, CH yoke replaced by Fulcrum recently and a Saitek throttle quadrant bit the dust but that one was, I think, before MFS & FSUIPC7 FSUIPC7.ini Quote Link to comment Share on other sites More sharing options...
John Dowson Posted April 3 Report Share Posted April 3 First, your FSUIOC version is out of date. Please download and install the latest version , v7.3.2 - only the latest version is supported. It is always a good idea to check that you are using the latest version before requesting support. 21 hours ago, Ron Attwood said: J=<< MISSING JOYSTICK >> << MISSING JOYSTICK >> K=<< MISSING JOYSTICK >> << MISSING JOYSTICK >> H=<< MISSING JOYSTICK >> << MISSING JOYSTICK >> This is reported as you still have assignments to those missing devices: Quote [Axes] PollInterval=10 RangeRepeatRate=10 12=HX,256,F,65766,0,0,0 -{ TO SIM: AXIS_ELEV_TRIM_SET }- ... [Axes.HOTAS] RangeRepeatRate=10 13=HX,256,F,65766,0,0,0 -{ TO SIM: AXIS_ELEV_TRIM_SET }- ... [Axes.Yoke+TPM] RangeRepeatRate=10 2=JX,256,F,65763,0,0,0 -{ TO SIM: AXIS_AILERONS_SET }- 3=JY,256,F,65762,0,0,0 -{ TO SIM: AXIS_ELEVATOR_SET }- 10=HX,256,F,65766,0,0,0 -{ TO SIM: AXIS_ELEV_TRIM_SET }- ... [Axes.Yoke+Twin] RangeRepeatRate=10 8=KX,256,F,66420,0,0,0 -{ TO SIM: AXIS_THROTTLE1_SET }- 9=KY,256,F,66423,0,0,0 -{ TO SIM: AXIS_THROTTLE2_SET }- 10=KZ,256,F,66291,0,0,0 -{ TO SIM: AXIS_PROPELLER_SET }- 11=KR,256,F,66424,0,0,0 -{ TO SIM: AXIS_PROPELLER2_SET }- 12=KU,256,F,66425,0,0,0 -{ TO SIM: AXIS_MIXTURE2_SET }- 13=KV,256,F,66422,0,0,0 -{ TO SIM: AXIS_MIXTURE1_SET }- 14=JX,256,F,65763,0,0,0 -{ TO SIM: AXIS_AILERONS_SET }- 15=JY,256,F,65762,0,0,0 -{ TO SIM: AXIS_ELEVATOR_SET }- 21=HX,256,F,65766,0,0,0 -{ TO SIM: AXIS_ELEV_TRIM_SET }- ... [Axes.Stick+Quadrant] RangeRepeatRate=10 8=JX,256,F,0,65695,0,0 -{ TO SIM: AILERON_SET }- 9=JY,256,F,0,65694,0,0 -{ TO SIM: ELEVATOR_SET }- 13=HX,256,F,65766,0,0,0 -{ TO SIM: AXIS_ELEV_TRIM_SET }- ... [Axes.Yoke+Quadrant] RangeRepeatRate=10 5=KX,256,F,65765,0,0,0 -{ TO SIM: AXIS_THROTTLE_SET }- 6=KZ,256,F,66291,0,0,0 -{ TO SIM: AXIS_PROPELLER_SET }- 7=KU,256,F,65765,0,0,0 -{ TO SIM: AXIS_THROTTLE_SET }- 8=KV,256,F,66292,0,0,0 -{ TO SIM: AXIS_MIXTURE_SET }- 9=JX,256,F,65763,0,0,0 -{ TO SIM: AXIS_AILERONS_SET }- 10=JY,256,F,65762,0,0,0 -{ TO SIM: AXIS_ELEVATOR_SET }- 14=HX,256,F,65766,0,0,0 -{ TO SIM: AXIS_ELEV_TRIM_SET }- ... [Axes.DC-6] RangeRepeatRate=10 ... 9=JX,256,F,65763,0,0,0 -{ TO SIM: AXIS_AILERONS_SET }- 10=JY,256,F,65762,0,0,0 -{ TO SIM: AXIS_ELEVATOR_SET }- ... 15=HX,256,F,65766,0,0,0 -{ TO SIM: AXIS_ELEV_TRIM_SET }- ... [Axes.Yoke+ Trimotor] RangeRepeatRate=10 ... 6=JX,256,F,65763,0,0,0 -{ TO SIM: AXIS_AILERONS_SET }- 7=JY,256,F,65762,0,0,0 -{ TO SIM: AXIS_ELEVATOR_SET }- ... [Axes.PC-6] RangeRepeatRate=10 ... 8=KX,256,F,66291,0,0,0 -{ TO SIM: AXIS_PROPELLER_SET }- 9=KZ,256,F,65765,0,0,0 -{ TO SIM: AXIS_THROTTLE_SET }- 10=KV,256,F,66292,0,0,0 -{ TO SIM: AXIS_MIXTURE_SET }- 11=JX,256,F,0,65695,0,0 -{ TO SIM: AILERON_SET }- 12=JY,256,F,0,65694,0,0 -{ TO SIM: ELEVATOR_SET }- ... 16=HX,256,F,65766,0,0,0 -{ TO SIM: AXIS_ELEV_TRIM_SET }- ... [Buttons.PC-6] 0=RK,16,C65602,0 -{THROTTLE_DECR}- 1=RK,12,C66006,0 -{PROP_PITCH1_DECR}- [Buttons.Yoke+Quadrant] 0=RK,12,C68069,0 -{THROTTLE_REVERSE_THRUST_TOGGLE}- 1=RK,16,C65771,0 -{PROP_PITCH_DECR}- ... [Axes.P-38 Lightning] RangeRepeatRate=10 2=JX,256,F,65763,0,0,0 -{ TO SIM: AXIS_AILERONS_SET }- 3=JY,256,F,65762,0,0,0 -{ TO SIM: AXIS_ELEVATOR_SET }- 11=HX,256,F,65766,0,0,0 -{ TO SIM: AXIS_ELEV_TRIM_SET }- ... [Buttons.JF Arrows] 0=RK,12,C68069,0 -{THROTTLE_REVERSE_THRUST_TOGGLE}- 1=RK,16,C65771,0 -{PROP_PITCH_DECR}- [Axes.JF Arrows] RangeRepeatRate=10 0=KX,256,F,65765,0,0,0 -{ TO SIM: AXIS_THROTTLE_SET }- 1=KZ,256,F,66291,0,0,0 -{ TO SIM: AXIS_PROPELLER_SET }- 2=KU,256,F,65765,0,0,0 -{ TO SIM: AXIS_THROTTLE_SET }- 3=KV,256,F,66292,0,0,0 -{ TO SIM: AXIS_MIXTURE_SET }- 4=JX,256,F,65763,0,0,0 -{ TO SIM: AXIS_AILERONS_SET }- 5=JY,256,F,65762,0,0,0 -{ TO SIM: AXIS_ELEVATOR_SET }- 9=HX,256,F,65766,0,0,0 -{ TO SIM: AXIS_ELEV_TRIM_SET }- Its not a problem, but if you want to correct this then remove all those assignments to these missing devices. John Quote Link to comment Share on other sites More sharing options...
Ron Attwood Posted April 3 Author Report Share Posted April 3 Out of date! My God, my very bad! I usually jump on an update tout sweet. Thanks John, 'preciate it. 🙂 Quote Link to comment Share on other sites More sharing options...
Ron Attwood Posted April 3 Author Report Share Posted April 3 You wouldn't believe how many time I've scrolled through the file looking for anomalies. I just didn't see for looking. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.