MIKE MCCARTHY Posted March 18, 2023 Report Posted March 18, 2023 (edited) *** Moved from FAQ sub-forum to main support forum *** hi. this is very frustrating. when fsx-se is running with fsuipc 4.977 installed my sim crashes to desktop. please advise how to fix. i'm not techy, at all though. thanks. mike Edited March 19, 2023 by John Dowson Moved to main support forum
MIKE MCCARTHY Posted March 19, 2023 Author Report Posted March 19, 2023 i guess there's no help here. thanks.
John Dowson Posted March 19, 2023 Report Posted March 19, 2023 First, you posted in the FAQ sub-forum where it explicitly states Not for support requests. Please post in the correct place if you require help. 7 hours ago, MIKE MCCARTHY said: i guess there's no help here. thanks. You seem rather impatient...it was around 9pm (here) on a Saturday night when you first posted, and then follow up with this 4 hours later.... Support here is pretty quick, but certainly not 24/7... 12 hours ago, MIKE MCCARTHY said: hi. this is very frustrating. when fsx-se is running with fsuipc 4.977 installed my sim crashes to desktop. please advise how to fix. Can you please show me you FSUIPC4.log and FSUIPC4.ini files, and also your InstallFSUIPC4.log file. I will take a look at them tomorrow. John
John Dowson Posted March 19, 2023 Report Posted March 19, 2023 Also, this is usually due to a corrupt weather file. Try disabling weather by setting NoWeatherAtAll=Yes to the [General] section of your FSUIPC4.INI file. If this solves it then either your wxstationlist.bin file is corrupt, or one of the .wx files saved with scenarios is bad. To resolve this, delete all of the .WX files from your FS Documents folder (where your flights are stored), and the file "wxstationlist.bin" in your <user>\AppData\Roaming folder for FSX. If that is not the issue, then this can be due to a corrupt FSX installation, most probably in SimConnect. You can try verifying the installation in the Steam client. Otherwise, please show me those files as requested. John
MIKE MCCARTHY Posted June 24, 2023 Author Report Posted June 24, 2023 On 3/19/2023 at 2:16 AM, John Dowson said: First, you posted in the FAQ sub-forum where it explicitly states Not for support requests. Please post in the correct place if you require help. You seem rather impatient...it was around 9pm (here) on a Saturday night when you first posted, and then follow up with this 4 hours later.... Support here is pretty quick, but certainly not 24/7... Can you please show me you FSUIPC4.l i only knowog and FSUIPC4.ini files, and also your InstallFSUIPC4.log file. I will take a look at them tomorrow. John john. thanks, but i have no idea how to find what you asked for. i am not techy, at all. i only know my fsx-se ctd after running sim for like 5 seconds. mike
MIKE MCCARTHY Posted June 24, 2023 Author Report Posted June 24, 2023 45 minutes ago, MIKE MCCARTHY said: john. thanks, but i have no idea how to find what you asked for. i am not techy, at all. i only know my fsx-se ctd after running sim for like 5 seconds. mike john. this is the only file i could find. looks like a .cfg file, though FSUIPC4.ini FSUIPC4.ini
John Dowson Posted June 26, 2023 Report Posted June 26, 2023 That is the ini file. The log file will be in the same folder. If you cannot see it, you have windows explorer set to hide the extensions of know file types - change this setting in the windows explorer settings to see the file extensions. And, as I said, usually CTDs on start-up are due to corrupt weather files. You can check to see if this is the issue by setting NoWeatherAtAll=Yes to the [General] section of your FSUIPC4.INI file. Please read my previous comment.... John
MIKE MCCARTHY Posted June 26, 2023 Author Report Posted June 26, 2023 On 6/24/2023 at 12:19 PM, MIKE MCCARTHY said: john. this is the only file i could find. looks like a .cfg file, though FSUIPC4.ini FSUIPC4.ini 656 B · 2 downloads HOPE THIS HELPS. MIKE FSUIPC4.log
MIKE MCCARTHY Posted June 26, 2023 Author Report Posted June 26, 2023 10 hours ago, John Dowson said: That is the ini file. The log file will be in the same folder. If you cannot see it, you have windows explorer set to hide the extensions of know file types - change this setting in the windows explorer settings to see the file extensions. And, as I said, usually CTDs on start-up are due to corrupt weather files. You can check to see if this is the issue by setting NoWeatherAtAll=Yes to the [General] section of your FSUIPC4.INI file. Please read my previous comment.... John HUH? ho bout making a program that doesnt ctd on fsx-se? 6 minutes ago, MIKE MCCARTHY said: HOPE THIS HELPS. MIKE FSUIPC4.log 2.87 kB · 0 downloads
MIKE MCCARTHY Posted June 26, 2023 Author Report Posted June 26, 2023 4 minutes ago, MIKE MCCARTHY said: HUH? ho bout making a program that doesnt ctd on fsx-se? how bout this install log file? FSUIPC4 Install.log
John Dowson Posted June 27, 2023 Report Posted June 27, 2023 12 hours ago, MIKE MCCARTHY said: HUH? ho bout making a program that doesnt ctd on fsx-se? If the issue is with a corrupt weather file, the problem is in the Simconnect SDK libraries provided by microsoft that read this file. We cannot do anything about this in FSUIPC. Did you try adding that ini parameter, as advised?
MIKE MCCARTHY Posted August 8, 2023 Author Report Posted August 8, 2023 On 3/19/2023 at 5:00 AM, John Dowson said: Also, this is usually due to a corrupt weather file. Try disabling weather by setting NoWeatherAtAll=Yes to the [General] section of your FSUIPC4.INI file. If this solves it then either your wxstationlist.bin file is corrupt, or one of the .wx files saved with scenarios is bad. To resolve this, delete all of the .WX files from your FS Documents folder (where your flights are stored), and the file "wxstationlist.bin" in your <user>\AppData\Roaming folder for FSX. If that is not the issue, then this can be due to a corrupt FSX installation, most probably in SimConnect. You can try verifying the installation in the Steam client. Otherwise, please show me those files as requested. John sorry; but fsx doesnt appear in that path user/ appdata/ roaming
MIKE MCCARTHY Posted August 8, 2023 Author Report Posted August 8, 2023 FSUIPC4.ini is this the file you're looking for?
MIKE MCCARTHY Posted August 8, 2023 Author Report Posted August 8, 2023 14 minutes ago, MIKE MCCARTHY said: sorry; but fsx doesnt appear in that path user/ appdata/ roaming see attached .ini file; olease help. thanks FSUIPC4.ini
MIKE MCCARTHY Posted August 8, 2023 Author Report Posted August 8, 2023 On 6/27/2023 at 1:46 AM, John Dowson said: If the issue is with a corrupt weather file, the problem is in the Simconnect SDK libraries provided by microsoft that read this file. We cannot do anything about this in FSUIPC. Did you try adding that ini parameter, as advised? john i attached the .ini file a while ago. hopefully you can find the problem
MIKE MCCARTHY Posted August 8, 2023 Author Report Posted August 8, 2023 2 minutes ago, MIKE MCCARTHY said: john i attached the .ini file a while ago. hopefully you can find the problem FSUIPC4.ini
John Dowson Posted August 9, 2023 Report Posted August 9, 2023 I don't know why you are repeatedly posting the same file. And I have already told you what to try, several times now: On 6/26/2023 at 11:08 AM, John Dowson said: And, as I said, usually CTDs on start-up are due to corrupt weather files. You can check to see if this is the issue by setting NoWeatherAtAll=Yes to the [General] section of your FSUIPC4.INI file. Please read my previous comment.... It really isn't worth you posting anyting until you have read my comments and tried my suggestions. You need to eliminate the possibility of aa corrupt weather file before anythung else. John
John Dowson Posted August 13, 2023 Report Posted August 13, 2023 @MIKE MCCARTHY Can you please stop creating further posts for this same issue. If you want help with this problem, I suggest you try what I have suggested first and report back using this thread. Any further threads/topics you create for this same issue will be deleted without response. John
MIKE MCCARTHY Posted August 16, 2023 Author Report Posted August 16, 2023 i attached requested file earlier, with no response.
John Dowson Posted August 16, 2023 Report Posted August 16, 2023 8 hours ago, MIKE MCCARTHY said: i attached requested file earlier, with no response. You keep attaching your FSUIPC4.ini file, which just tells me that you have not added: NoWeatherAtAll=Yes to the [General] section of this file and tried with this, as I keep asking you to do. Please try that. If it still crashes, please attach your FSUIPC4.log file, and also check the windows Event viewer and post details of the crash events.
MIKE MCCARTHY Posted August 17, 2023 Author Report Posted August 17, 2023 I JUST ADDED IT. seems to work- for now. thanks for puttin up with me. but i have another issue. fsuipc is no sending signal to an acars that my BEACON light is off; even though i see that its on. any ideas? thanks. mike
John Dowson Posted August 17, 2023 Report Posted August 17, 2023 6 hours ago, MIKE MCCARTHY said: I JUST ADDED IT. seems to work- for now. Ok, then this implies that one of your weather files is corrupt. To correct this, delete all of the .wx files from your FS Documents folder (where your flights are stored), and the file "wxstationlist.bin" in your <user>\AppData\Roaming folder for FSX. Once you have done that, you can remove the NoWeatherAtAll=Yes entry from your FSUIPC4.ini file and try again. 6 hours ago, MIKE MCCARTHY said: i have another issue. For other issues, please raise a new topic, with a relevant title. You cannot use this same topic for all issues. Please also check for similar issues before raising a new topic. 6 hours ago, MIKE MCCARTHY said: fsuipc is no sending signal to an acars that my BEACON light is off; even though i see that its on. any ideas? FSUIPC does not send anything, it will be the acars program that reads the state data from FSUIPC. The acars program is probably trading the beacon light state either from offset 0x281 or offset 0x0D0C. You can try logging those offsets to see if they hold the correct state of the beacon lights for the aircraft you are using (see the User guide on logging facilities and the Offset Status guide for details on those offsets). Other than that, I cannot help with 3rd-party programs that I do not know. You should try the support for the acars program. John
MIKE MCCARTHY Posted August 17, 2023 Author Report Posted August 17, 2023 21 hours ago, MIKE MCCARTHY said: I JUST ADDED IT. seems to work- for now. thanks for puttin up with me. but i have another issue. fsuipc is no sending signal to an acars that my BEACON light is off; even though i see that its on. any ideas? thanks. mike spoke too soon. still ctd. even after adding noweatheratall YES
John Dowson Posted August 18, 2023 Report Posted August 18, 2023 So it was working and now it is not again? What changed? Can you please post the files I need to see when you get a CTD: FSUIPC4.log FSUIPC4.ini the crash event(s) from the windows Event viewer I really need to see these files if you want assistance with this. It is no use telling me that it is crashing and providing nothing that helps me understand when, why and where this is occurring. John
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now