Jump to content
The simFlight Network Forums

P3D V4.5 HF3, Aerosoft CRJ professional v2.5.0.6, Honeycomb Bravo Throttle Axis Problem+ FSUIPC related


Recommended Posts

Posted

I have the registered version of FSUIPC6 for P3D V4.5

I have posted over at Aerosoft forum about this problem that I have been a few days trying to figure out. I have the Honeycomb Bravo with default settings. P3D axis are assigned for throttle 1 and 2, plus spoilers and flaps. Whenever I moved an axis the plane would suddenly be in the air and out of control. A forum member suggested I temporarily move the Modules folder out and test. Sure enough that test worked and the throttle axis worked and the plane reacted normally. I then moved the Modules folder back and the same problem had occurred, in the air and out of control. I then removed the FSUIPC.ini and the problem went away.

I did not set any assignments at all in FSUIPC for the Aerosoft CRJ Professional. Here is my .ini settings. Can someone help me to identify the problem? I only have the default Mooney Bravo and FSLabs A320 setup in FSUIPC. I want to keep my settings for both planes.

My hardware controllers are Honeycomb Alpha, Bravo and ThrustMaster Rudder

Thanks in advance!

Jeff

 

[General]
UpdatedByVersion=6109
History=5DY02XTUR1KOC6FJEYRCN
InitDelayDevicesToo=No
PMDG737offsets=Auto
PMDG747offsets=Auto
PMDG777offsets=Auto
Annotate=Yes
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
RestoreSimcWindows=No
FixMachSpeedBug=No
AutoScanDevices=Yes
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
EnableExtraButtons=Yes
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ZapAirRange=1.50
ZapGroundRange=0.25
ZapCylinderAltDiff=0
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
DelayedMouseLookZoom=No
WideLuaGlobals=Yes
AxesWrongRange=No
TCASid=Flight
TCASrange=40,3
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
ThreadAffinityMask=x0
LuaAffinityMask=x0
InitDelay=0
GetNearestAirports=Yes
LogOptionProtect=Yes
TimeToDelayTexts=100
TimeForLuaClosing=2
WeatherReadFactor=2
WeatherRewriteSeconds=1
TrafficStallTime=1
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
ComReadLoopTime=20
Console=No
ConsoleWindowTopMost=No
FSVersionUsed="Lockheed Martin® Prepar3D® v4",4.5.14.34698
SimConnectUsed=4.5.0.0

[Traffic Limiter]
AirportPreference=50
PlannedAirportsPreference=50
GroundPreference=50
NearerPreference=50
TargetFrameRate=0
LoLimit=0
HiLimit=0

[JoyNames]
AutoAssignLetters=No
0=Bravo Throttle Quadrant
0.GUID={E8023620-9288-11ED-8001-444553540000}
1=T-Rudder
1.GUID={83F04F40-8E9C-11ED-8001-444553540000}
2=Alpha Flight Controls
2.GUID={E8025D30-9288-11ED-8002-444553540000}

[JoystickCalibration]
RudderBlendLowest=1
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=No
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Rudder=-16384,0,512,16383
SlopeRudder=15
Throttle1=-16383,-512,512,16384/16
Throttle2=-16191,-512,512,16384/16

[Axes]
PollInterval=10
RangeRepeatRate=10

[Buttons]
PollInterval=25
ButtonRepeat=20,10
1=P2,5,C65607,0     -{ELEV_TRIM_DN}-

[AutoSave]
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No

[GPSout2]
GPSoutEnabled=No

[WideServer]
WideFSenabled=Yes

[Sounds]
Path=C:\Lockheed Martin\Sound\
Device1=Primary Sound Driver
Device2=Speakers (4- Bose USB Audio)
Device3=Realtek Digital Output (Realtek High Definition Audio)
Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio)
Device5=Headset Earphone (HyperX Virtual Surround Sound)

[Profile.Mooney Bravo]
1=Mooney Bravo

[Axes.Mooney Bravo]
RangeRepeatRate=10
0=1X,256,D,8,0,0,0    -{ DIRECT: RightBrake }-
1=1Y,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
2=1Z,256,D,3,0,0,0    -{ DIRECT: Rudder }-

[JoystickCalibration.Mooney Bravo]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
RudderBlendLowest=1
Rudder=-16384,0,512,16351
SlopeRudder=15
LeftBrake=-16380,16380
RightBrake=-16380,16380

[Buttons.Mooney Bravo]
0=R2,4,C65615,0     -{ELEV_TRIM_UP}-
1=R2,5,C65607,0     -{ELEV_TRIM_DN}-

[Profile.FSLabs Airbus A3xx]
1=FSLabs A320-214 - FSL (SX-FSL)
2=FSLabs A320-214 - FFTR (N205FR)

[Axes.FSLabs Airbus A3xx]
RangeRepeatRate=10
0=0Z,256,D,23,0,0,0    -{ DIRECT: Flaps }-
1=1X,256,D,8,0,0,0    -{ DIRECT: RightBrake }-
2=1Y,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
3=1Z,256,D,3,0,0,0    -{ DIRECT: Rudder }-
4=2X,256,D,1,0,0,0    -{ DIRECT: Aileron }-
5=2Y,256,D,2,0,0,0    -{ DIRECT: Elevator }-

[Buttons.FSLabs Airbus A3xx]
0=P2,4,C65615,0     -{ELEV_TRIM_UP}-
1=P2,5,C65607,0     -{ELEV_TRIM_DN}-

[JoystickCalibration.FSLabs Airbus A3xx]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
RudderBlendLowest=1
Aileron=-16255,0,512,16319
Elevator=-16191,0,512,16159
Rudder=-16287,0,512,16383
SlopeRudder=15
LeftBrake=-16384,16383
RightBrake=-16384,16383
FlapStarts=-16384,-8931,-450,8447,16383
FlapEnds=-16384,-7100,352,9503,16384

 

Posted

As you have no profile for the PMDG aircraft, the default calibration section will be applied. Create a calibration profile for the PMDG and clear/reset the throttle axis calibration in that profile.

You should also change this:

Quote

[Profile.FSLabs Airbus A3xx]
1=FSLabs A320-214 - FSL (SX-FSL)
2=FSLabs A320-214 - FFTR (N205FR)

to this

Quote

[Profile.FSLabs Airbus A3xx]
1=FSLabs A320-214

to catch different liveries (using substring matching). And also change the aircraft name in your new PMDG profile to a substring match rather than using the full aircraft-with-livery name.

John

Posted

Hi John,

Thank you for the help. Under Joystick Calibration I deleted the following lines in my original .ini file

Throttle1=-16383,-512,512,16384/16
Throttle2=-16191,-512,512,16384/16

I tested the Aerosoft CRJ and throttles axis worked with no ill affects. In fact I assigned the Alpha yoke and ThrustMaster rudder pedals using FSUIPC. I left the Bravo quadrant alone and let P3D control, for now. I have not tested the FSLabs A320 after making this change. 

I am confused about your comment about PMDG profile. Are you saying that I set up a PMDG profile inside the Honeycomb Configurator for an Aerosoft CRJ Professional and then activate that inside P3D? Are the Aerosoft and PMDG similar with regards to hardware configuration?

Jeff 

Posted
8 hours ago, JboiLA said:

I am confused about your comment about PMDG profile. Are you saying that I set up a PMDG profile inside the Honeycomb Configurator for an Aerosoft CRJ Professional and then activate that inside P3D? Are the Aerosoft and PMDG similar with regards to hardware configuration?

No - I am referring to FSUIPC profiles. You have two FSUIPC profiles, one for the Mooney Bravo and one for the FSLabs A320. I was saying that as you do not have an FSUIPC profile for the PMDG, the general calibration section will be being applied. You have corrected your issue now by deleting the general throttle calibration, but this could re-appear if you calibrate for any other aircraft not in a profile. The better way to stop this happening is to create a calibration profile for the PMDG and reset the throttle calibration there.

John

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.