belgiumflightsimpilot Posted July 17, 2023 Report Posted July 17, 2023 hello I would like to bind the fuel cut levers of a pmdg aircraft to two axess on my tca boeing yoke? can I do that? and how? also if I can do that can I set fsuipc to onlu load this setting when flying a b738/9? 1
John Dowson Posted July 17, 2023 Report Posted July 17, 2023 I don't have the 738/739, bur check the SDK for custom controls to control the fuel cut-off levers. For the 737, you would use the following: Quote #define EVT_CONTROL_STAND_ENG1_START_LEVER (THIRD_PARTY_EVENT_ID_MIN + 688) #define EVT_CONTROL_STAND_ENG2_START_LEVER (THIRD_PARTY_EVENT_ID_MIN + 689) See the following FAQ entry on how to use custom controls with PMDG aircraft: Alternatively, you could try the following PMDG presets - these are for the 737 but may also work with the 738/9: PMDG_B737-7_FUEL_CUT_OFF_LEVER1_DN PMDG_B737-7_FUEL_CUT_OFF_LEVER1_UP PMDG_B737-7_FUEL_CUT_OFF_LEVER2_UP PMDG_B737-7_FUEL_CUT_OFF_LEVER2_DN 43 minutes ago, belgiumflightsimpilot said: I would like to bind the fuel cut levers of a pmdg aircraft to two axess on my tca boeing yoke? Not sure why you would want to bind these controls to axes as they are standard events fir buttons/switches, not axes controls. However, you can assign them to an axis if you wish. You would normally do this using the right-hand side of the axis assignment panel, to send the desired control when entering or leaving an axis range. 46 minutes ago, belgiumflightsimpilot said: also if I can do that can I set fsuipc to onlu load this setting when flying a b738/9? Yes. You need to create an FSUIPC profile for the v738/739 and make the assignment profile-specific. Please see the provided documentation on using profiles. John
TimSteve Posted July 18, 2023 Report Posted July 18, 2023 22 hours ago, belgiumflightsimpilot said: hello I would like to bind the fuel cut levers of a pmdg aircraft to two axess on my tca boeing yoke? can I do that? and how? also if I can do that can I set fsuipc to onlu load this setting when flying a b738/9? Certainly! You have the ability to bind the fuel cut levers of a PMDG aircraft to two axes on your TCA Boeing Yoke. Just assign the first axis to throttle control and the second axis to fuel mixture control. Additionally, with FSUIPC, you can create a profile specifically for the B738/9 to ensure that these settings are automatically loaded. Enjoy your flights!
belgiumflightsimpilot Posted July 20, 2023 Author Report Posted July 20, 2023 @TimSteve I found a way to make this work. both fuel levers are on the axess
maxam Posted July 10 Report Posted July 10 (edited) In an attempt to program the Bravo Throttle I choose "Select Preset" in FSUIPC7, but the window is blank. I have the PMDG 737-700 installed. What am I doing wrong? Robert I manually added the following using a suggestion from another thread, but the engines don't produce any thrust, the engines do start however: [Buttons] PollInterval=25 ButtonRepeat=20,10 1=PC,8,C66587,68801 -{ROTOR_BRAKE}- 2=UC,8,C66587,68801 -{ROTOR_BRAKE}- 3=PC,11,C66587,68901 -{ROTOR_BRAKE}- 4=UC,11,C66587,68901 -{ROTOR_BRAKE}- Edited July 10 by maxam Added information.
John Dowson Posted July 11 Report Posted July 11 11 hours ago, maxam said: In an attempt to program the Bravo Throttle I choose "Select Preset" in FSUIPC7, but the window is blank. I have the PMDG 737-700 installed. What am I doing wrong? I don't know as you do not provide enough information. Did you install the FSUIPC WASM module? Did you install the MobiFlight events.txt file (which holds the MF presets)? Please show me/attach your FSUIPC7.log file and also your InstallFSUIPC7.log file and I will take a look.
maxam Posted July 12 Report Posted July 12 I installed the FSUIPC WASM Module and Mobiflight events.txt, but the preset remains blank. FSUIPC7.log InstallFSUIPC7.log
John Dowson Posted July 12 Report Posted July 12 3 hours ago, maxam said: I installed the FSUIPC WASM Module and Mobiflight events.txt, but the preset remains blank. You have NOT installed the MF events.txt file - from you installation log: Quote MF events.txt file not installed. and from you FSUIPC7.log file: Quote 62 Preset file 'C:\FSUIPC7\events.txt' not found [info only] 62 Preset file 'C:\FSUIPC7\myevents.txt' not found [info only] Please re-run the installer and select to install the MF events.txt file, or download it from the MF HubHop site (https://hubhop.mobiflight.com/presets/) and copy it to your FSUIPC7 installation folder.
maxam Posted July 13 Report Posted July 13 On 7/11/2024 at 11:51 PM, John Dowson said: You have NOT installed the MF events.txt file - from you installation log: and from you FSUIPC7.log file: Please re-run the installer and select to install the MF events.txt file, or download it from the MF HubHop site (https://hubhop.mobiflight.com/presets/) and copy it to your FSUIPC7 installation folder. That worked; thank you very much, John!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now