DrDave-

Lua Log Entries - is there documentation of the Lua log entries, including Lua errors. I so, please describe where they may be. Simvar Tool - Do you use a tool to discover/analyze MSFS Simvars and/or controls? If so which one and can we download it? Thanks

Thanks, couldn't figure that out.

Thank you

Edit poat!

I have received type errors on entries in the myOffsets.txt, shown in the FSUIPC7.log. They are: 8406 *** myOffsets.txt: Invalid type 'Bool' specified for offset entry 0x66C0 and will not be added *** 8656 *** myOffsets.txt: Invalid type 'Bool' specified for offset entry 0x66C1 and will not be added *** 8656 *** myOffsets.txt: Invalid type 'Bool' specified for offset entry 0x66C2 and will not be added *** The entries in myOffsets.txt are: // myOffsets.txt to FSUIPC7 folder // // offset, size, simvar, type, units [, w] 0x66C0, 1, GENERAL ENGINE STARTER ACTIVE:1, Bool, Bool, w 0x66C1, 1, GENERAL ENGINE STARTER ACTIVE:2, Bool, Bool, w 0x66C2, 1, ATC, Bool, Bool, w "Adding Simulator variables (simvars) to FSUIPC offsets" in The the FSUIPC7 for Advanced Users doesn't mention a Bool type. I did copy the entries from a reply to a previous post I entered. Can you let me know what type it should be? Errors_myOffsets.txt

Highly appreciated, thanks

Hello again, I keep receiving the following error in the FSUIPC7.log: 105922 *** LUA Error: C:\FSUIPC7\1Sayo-12Keys.lua:62: unexpected symbol near 'â' I can't for the life of me figure out why. Please Help FSUIPC7 Lua Error.pdf FSUIPC7.ini FSUIPC7.log 1Sayo-12Keys.lua

Mr Dawson, A long time user of FSUIPC but new to some of the control neuances, I have several questions if you will. 1. Not about controls but the FSUIPC7 install. I have noticed that when FSUIPC is installed, it may overwrite the last <Launch.Addon> sequence when adding the sequesnce for FSUIPC. Three times now, I have had to reinstall "RealSimGear's" <Launch.Addon> sequense after installing the latest version of FSUIPC7. I readd FSUIPC7 about every 2 weeks. 2. It is apparent (and higly appreciated) that controls used by assignments and Lua are derived and modified from SimConnect by FSUIPC7. I understand the modifications and how to use toggle and set. May I assume that toggle and set controls can be turned on and off or modified? 3. I have used the button on throttle on my Bravo to toggle ATC thru MSFS Controls. SDK Variables also show ATC as well as ATC_MENU-OPEN and ATC_MENU_CLOSE. You provide an ATC control but no Offset for any of the ATC variables that I can find. How does one test an FSUIPC7 control? Can't seem to find how to. I have a set of buttons I use thru FSUIPC7. I input the ATC numbers into MSFS thru keyboard assignment and by using one of the keys to tell an Lua the next press is a number (kind of like a shift). I would like to test to see if the ATC Menu is open. As I can't find how to test a control and there is no offset, please let me know if testing a control is available. Thank you. 1Sayo-12Keys.lua

Missed 2 Cockspur variables assigned to 1 LVar. Is myevents.txt the same as events.txt installed with FSUIPC7? Now thought that's not true. You would have stated to update events.txt. In the C510, GENERAL ENGINE STARTER ACTIVE is used to turn the started buttons on and off. Again thanks.

Missed 2 Cockspur 2 variables assigned to 1 LVar

Thanks. Appreciate the input.

Also, may I assume that as an example: ipc.writeLvar(“FSUIPC_C510_Ignition_1", 1) will turn the ignition on and ipc.writeLvar(“FSUIPC_C510_Ignition_1", 0) will turn the ignition off?

I assume A: GENERAL ENGINE STARTER ACTIVE:1 and A: GENERAL ENGINE STARTER ACTIVE:1 are offsets 0x0892 2 GENERAL ENG STARTER:1 and 0x092A 2 GENERAL ENG STARTER:2 respectively? Thanks again

Wow, thank you John - Thank you Another Cockspur C510 user sent me the following (for your use): I added the FSUIPC7controls. He was using https://www.axisandohs.com/ for his controls. Never heard of this app (been using FSUIPC before any version)s. Never heard of Axis and Ohs. I'm still finding the controls for ENGINE STARTER ACTIVE:1 and 2. "djd565 — Yesterday at 9:15 PM I am using: TOGGLE_STARTER1 66300 TOGGLE_STARTER1 TOGGLE_STARTER2 66301 TOGGLE_STARTER2 and for the fuel cocks, these set to 1 or 0 simultaneously for each position.: SET_FUEL_VALVE_ENG1 67280 SET_FUEL_VALVE_ENG1 L:switch_fuel_left SET_FUEL_VALVE_ENG2 67281 SET_FUEL_VALVE_ENG2 L:switch_fuel_right and for the starter lights: A: GENERAL ENGINE STARTER ACTIVE:1 A: GENERAL ENGINE STARTER ACTIVE:2"

Highly appreciate your time

Thank you John, I appreciate your following up on this. At the same time, I'll contact Cockspur. Regards, Dave

Thanks for your Sunday time. Hubhop doesn't have this aircraft yet, I'll contact Cockspur. RealSimGear has a significant .ini which correlates its tags to the Simmconnect variables. Can, like FSUIPC's .ini, be tailored. My point is, most MSFS business jets contain G3000 or G5000. I want to use the G1000. Haven't been able to find out yet how to switch gauges in MSFS. It was fairly easy in FSX with the panel.cfg file. Changing the panel.cfg or panel.xml files in MSFS seems to have no effect. Can't find out how the virtual cockpit panels are defined. Thanks for your input. Happy Sunday.

Sorry, I replied before reading your post. I am using Cockspur's Cessna C510 Mustang. Apparently, their support person is separate from the company's CEO/Owner/Developer. He doesn't know the internals and the CEO is traveling (not available). I'm trying to use this aircraft as it is the only 2 engine business jet for MSFS that uses the G1000. I have the RealSimGear G1000 suite in my home built cockpit. I developed many of my own gauges, panels and controls in FSX. Not a clue yet how to do that in MSFS. Frustrating!

Very quick response. Highly appreciated.

Sorry, can you post what file types contain the LVars and where the files are located for a specific aircraft. Does FSUIPC documentation contain a discussion? You provide many documents, sometimes a specific discussion is hard to find.

PS - I copied the FSUIPC7 install file and key. Should have downloaded new install file. Did that. Thanks. I'm trying to find the start and ignition LVars for the payware aircraft. I now have the LVars for the aircraft with no obvious start or ignition (there are 2 jets). There are, however, several LVars that the names look like random GUID text. Trying to find MSFS documentation on where to find the code, xml, cfg files where these LVars are used. Many payware aircraft don't have their documentation published. The keypress lua I have created using FSUIPC7 controls don't seem to work. I'll try the offsets next for start, fuel. But I really would like to find the tags that are used in this aircraft. I have been a user of FSUIPC since FSX came out. So very appreciative of your work.

Thanks - understood

Good morning, I have searched online for input to enable WASM LVar listings for a third party aircraft (Cockspur Mustang C510). I had a list from a previous installation of FSUIPC7 (I changed MSFS to a new PC and reinstalled all). Upon starting MSFS with the FSUIPC7's MSFS.bat file, the Consile Add-ons > WASM > subMenu displays only Disable. I have tried several interations of executing FSUIPC7 without success. Reinstalled FSUIPC7, started MSFS, put the aircraft "ready to fly" at the end of the runway and selected the Console. Found the topic "Little fix for FSUIPC7 needed to make it work better with the CPFlight driver" and followed the recommended steps. Found other "fixes" with Bing Search and attempted to use the "fixes". Reinstalled FSUIPC7, renamed the "EXE.xml" file (EXE.xml.bak), started MSFS, put the aircraft "ready to fly" at the end of the runway, then started FSUIPC7 and selected the Console. None of the above were successful. As you recommend, the lvar refresh rate be 6Hz. FSUIPC7_WASM.ini = "LvarUpdateFrequency=6Hz" The .ini also states "; StartEventNo: this must be the same as defined in the FSUIPC7.ini file StartEventNo=0x1FFF0" Couldn't find an entry in the FSUIPC7.ini file to compare. Please let me know if there is anythig else I can try to fix this issue. In the past, FSUIPC7 found ~200 LVars. FSUIPC7.ini FSUIPC7.log FSUIPC_WASM.ini

Thanks