[Ver. 7.0.5 - FSUIPC7 is not starting through the batch file.]

I think I found a solution for the exe.xml problem.

There are to cases that work

If FSUIPC7.exe is set to start as administrator, you must start MSFS with admin rights.

If FSUIPC7.exe is NOT set to start as administrator, do must start MSFS WITHOUT admin rights.

Every other combination does not work.

 

[Ver. 7.0.5 - FSUIPC7 is not starting through the batch file.]

Hi John,

he did edit the batch and uses the "old method" that works for him.

We have both the same Version of MSFS (MS Store) 

BTW it was the Aerosoft installer of the honeycomb AFC-Bridge that setup a incorrect exe.xml

We will give it a try to first install FSUIPC7 and after that the AFC-Bridge.

Thanks so far.

 

[Ver. 7.0.5 - FSUIPC7 is not starting through the batch file.]

Hi, same Problem here on a friends system.

There are two programs that should launch.

1 AFC_Bridge for Honeycomb B-Throttle light

2. FSUIPC

1. does launch but 2. does not, on his system.

On my system there is no problem with the exe.xml (attached here)

 FSUIPC 7.005 on both systems:
Difference. his MSFS is not installed on Default Path C:.... My MSFS is in the default location.

2. Difference, Install path of FSUIPC his path is D:\FSTools\FSUIPC7 on his system.

 

 

exe.xml

[FS2020 - A lot of informations]

LittleNavMap works well with the closed Beta of MSFS using  Simconnect, maybe you could use the same dll?

 

[32 button limit]

With LINDA you can assign all 35 Buttons without any virtual Button.

Andrew from LINDA answered to me:

Quote

Thank you for the feedback. LINDA extracts the number of axis and buttons directly from the device. It just needs the button reference to initiate the assigned function. Obviously, FSUIPC has a built in limit. If you feed this back to the FSUIPC support forum I am sure that the developer will make the necessary changes for this new device.

 

[Thank you Pete]

I like to give you and all developers a big "thank you" for giving this new baby such a good start.

This is an incredible good job, you've done for us.

 

 

 

[CH-Pro Rudder pedals FSUIPC5 regognition]

Great Pete,

Problem is fixed.

 

[CH-Pro Rudder pedals FSUIPC5 regognition]

Hi Pete,

First of all a big thank you for investigating so much in  FSUIPC5.

I found a problem with FSUIPC5.101e making a new entry for the CHPro pedals every time I start P3dv4.

After 3 times I have 3 entrys for the CHPro Pedals.

Regards 

Roland

FSUIPC5.ini

FSUIPC5.JoyScan.csv

FSUIPC5.log

[send STRG via FSUIPC]

On 27.12.2016 at 11:05 AM, mroschk said:

very complicated.

Just go to the Button & Switches Tab, press the Joy Button and select Keypress & Hold.

Enter Number 17 ( vor the CTRL Key ) and check repeat while hold.

 

So easy

Yes, but don't forget to enter Key Release in "... when button released) Parameter 17

[FSUIPC Installer and dll.xml]

I think I have to ask the programmer of Migration tool. It's the Migration tool who reorders the entries in that way.

I can only say, one file works, the other not, that's all.

And its not me who moved any entry anywhere.

That's all complicated stuff, I would be happy if we had a new online client other then FSCopilot, so 

that there is no need for any migration tool.

So for me its OK to copy back my backupfile.

[FSUIPC Installer and dll.xml]

Quote

Ugh! Those awful things are a pain. They mess up the installation entries in registries and don't repair them afterwards! Bad news all round.

Very sorry to do so, but we have to use FSCopilot on our clubserver and without patching it wont work.

What the installer does, even when there is no need to update, cause the last version is already installed, is to

reorder the entries in dll.xml.

Several add ons do not like that, I suppose.

Regards

Roland

 

dll.xml

dll Original.xml

[FSUIPC Installer and dll.xml]

Hi Pete,

Im using P3Dv3 with migrationtool

every time a new version is installed by the installer some of the other addons modules don't work.

(GSX and FSCopilot).

I always copy back the backup of dll.xml to get them work again.

Is it possible that the Installer does not alter the existing dll.xml if FSUIPC is already listed in the dll.xml?

 

[P3D V3 Windows 10 and FSUIPC 4.945]

yes 4.495a works in P3DV3 and several names of controls are missing. But, if you just copy your FSUIPC4.ini from P3DV2.5 to modules in PrDV3 all your assignments will work.

You'll have to do some editing regarding pathnames in the ini (I.E I had to rename S:\P3D into S:\P3DV3)

Just use the "find and restore" function of notepad editor.

[FSUIPC old versions?]

Hi Pete,

 

good Job, 4.939n solved the problem with VRInsight MCP1 (in my case)

[Pete - FSUIPC v4.85 Not Initializing Properly (4.84 is OK)]

Great Pete,

that 4.851 fixed my problem.

[Pete - FSUIPC v4.85 Not Initializing Properly (4.84 is OK)]

Also having some problems with autostarting LUA-Plugins.

[Auto]

1=Lua ThrottleManager

doesn#t work with 4.85 but with older versions

[Throttle Manager to Allow Axis Forward/Reverse Toggle]

Hi,

great tool, just like to thank a lot.

[Controlspike_elemination for Throttle]

Hi Pete,

Problem seems to be fixed. It was exactly the same behavior as Ian BAW19 posted here http://forum.simflight.com/topic/69361-how-to-suppress-negative-axis-values/.

It is fixed with the new Version 4.731

Glad to see that I was not the only one :-)

And thanks for fixing so quick.

[Installer Version 4.728 Problem]

That was the trick :-)

I deleted the browser cache (Google Chrome)

Now it works perfekt

Good job Pete :-)))

Thx

[Installer Version 4.728 Problem]

Hi Pete,

are you sure? The file date is 12.09.2011, and the installer has the same problem.

I think it is the old one, version installed is 4.728

[Installer Version 4.728 Problem]

Hi Pete,

I installed the 4.70 (I now it will not overwrite my newer version) and the Installer found the right path:

I attached the two logfiles but had to rename it to *.txt because *.log is permitted to upload here

FSUIPC4 Install.txt

FSUIPC4.728 Install.txt

[Controlspike_elemination for Throttle]

Hello Pete,

I use the Saitek driver, but without the Saitek-Software (I don't like problems ;-)) )

And I will do some testing with the logs when using the NGX.

I will try to use the logfile like a blackbox and analyse it with Excel :-)

Thanks for this time,

[Installer Version 4.728 Problem]

Hi Pete,

normaly I update my FSUIPC4 Version only by downloading the newest dll.

This time I tried the installer and he fails

Looking for the current user's Application Data path:

... but it isn't found!

Now finding G:\Documents and Settings\<username>\Application Data\Microsoft\FSX\FSX.CFG for all users

But I have a german Windows XP and the right path must be

G:\Documents and Settings\<username>\Anwendungsdaten\Microsoft\FSX\FSX.CFG

In this case it is not the problem, that the installer couldn't edit the DLL.xml, cause FSUIPC4 is already in there.

[Controlspike_elemination for Throttle]

Hi Pete,

it seems to be a Saitek-Problem, that the potentiometers are not the best, serveral members of our club have or had have problems with it.

This throttle-unit is pretty new.

But how can I get sure that the spike comes from the throttle-axis (Hardware) Could i log raw-data from the HID-controller?

[Controlspike_elemination for Throttle]

Why are you moving the throttle lever during A/T use? Is this to match the A/T positioning? normally with FS you have to park the throttle somewhere without jitter

No I didn't move the lever after reaching 40% N1, the I pressed TO/GA and A/T takes control. Sorry, my english is a bit poor, you misunderstood me.

But it's OK if there is no solution for this hardware driven problem.