target11

Hello I would like to assign 2 functions to the same button I created a Mouse macro for the FD 11 = A320_FD_L = RX40000004.3 12 = A320_FD_R = RX40000021.3 I will want to assign them to a single button in my profile. (the numbers do not match, because I made a copy of a piece of the profile) 69 =; *************************** 70 =; FD L R ON 71 =; *************************** 72 = P2,23, CM1: 11,0 - {Macro A320NS: A320_FD_L} - 73 = P2,23, CM1: 11,0 - {Macro A320NS: A320_FD_L} - 74 =; *************************** 75 =; FD L R OFF 76 =; *************************** 78 = U2,23, CM1: 11,0 - {Macro A320NS: A320_FD_L} - 79 = U2,23, CM1: 11,0 - {Macro A320NS: A320_FD_L} - The 11 wished to say what I did not find the information thank you for your answers cordially

Hallo I don't know if it can help this method works on the a32nx configure a 3 position button (hotas warthog) configure the " engin mode selector " and in fs 2020 configure the keys of "toggle engine 1 fuel valve" and "toggle engine 2 fuel valve" and assign these keys to two buttons on your joystick cordially

Hello thank you for your reply indeed that was the solution thank you very much I changed the throttle axes (hotas warthog) 3 = CZ, 256, F, 67110,67124,0,0 - {TO SIM: THROTTLE2_AXIS_SET_EX1, THROTTLE4_AXIS_SET_EX1} - 4 = CR, 256, F, 67103,67117,0,0 - {TO SIM: THROTTLE1_AXIS_SET_EX1, THROTTLE3_AXIS_SET_EX1} - by 3 = CZ, 256, F, 67110,67124,*0.5,+8192 - {TO SIM: THROTTLE2_AXIS_SET_EX1, THROTTLE4_AXIS_SET_EX1} - 4 = CR, 256, F, 67103,67117,*0.5,+8192 - {TO SIM: THROTTLE1_AXIS_SET_EX1, THROTTLE3_AXIS_SET_EX1} - afterwards he tries to add 0,0 but works perfectly 3=CZ,256,F,67110,67124,0,0,*0.5,+8192 -{ TO SIM: THROTTLE2_AXIS_SET_EX1, THROTTLE4_AXIS_SET_EX1 }- 4=CR,256,F,67103,67117,0,0,*0.5,+8192 -{ TO SIM: THROTTLE1_AXIS_SET_EX1, THROTTLE3_AXIS_SET_EX1 }- for the a32nx without * 0.5, + 8192 works fine now 2=CZ,256,F,67110,67124,0,0 -{ TO SIM: THROTTLE2_AXIS_SET_EX1, THROTTLE4_AXIS_SET_EX1 }- 3=CR,256,F,67103,67117,0,0 -{ TO SIM: THROTTLE1_AXIS_SET_EX1, THROTTLE3_AXIS_SET_EX1 }- thanks again cordially

Hello, thank you for your answer Jaxx post on the crj i tried it, but it gives me the same. The throttle control on the simulator starts to move from 0, so I have a 1/3 of the hotas throttle control from -16384 to 0 which is not used. cordially

Hello thank you for your reply, I had already had a problem with a32nx until I read this. I don't have any mods, but people have told me that the FBW listens for certain simulator events instead of axis variables. I'm not really sure, but you should try these events ELEVATOR_SET AILERON_SET RUDDER_SET THROTTLE1_SET THROTTLE2_SET so you are right that developers implement their own subsystems. the "send direct to FSUIPC calibration" function works very well on MSFS 2020 planes, but not on certain add-ons such as the a32nx or the crj For the "THROTTLE 1_AXIS_SET_EX1" function, when I configure the axes it takes -16384 until 16383, on this page I don't think I can calibrate the axes. On page 3 of the Joystick Calibration tab, I can't calibrate absolutely anything even if I check the "Map to 4 Throttle" box on page 1 of the Joystick Calibration tab. cordially

Hello if I take the "THROTTLE 1_AXIS_SET_EX1" configuration for the example, I have the impression that on the warthog hotas, from -16384 to 0 on this configuration is provided for the reverses, and from 0 to 16383 it is planned to put the throttle, because the throttle in the simulator only starts to move from 0 on the hotas, but I'm sure I'm wrong. my question is that we can configure the axis so that -16384 becomes 0 without programming because I don't know anything about it, or is that the function "THROTTLE 1_AXIS_SET_EX1" has been done in the same way by asobo and we can not do anything ? thank you for your answers cordially

Hello sorry for my English send direct to FSUIPC calibration (normally I take this configuration) in this configuration, the throttle control moves at the same time as the throttle (joystick) send to FS as normal axis in this configuration the throttle control starts to move when the throttle (joystick) and is 1/3 of its course, so there is a timeout between the throttle control and the throttle (joystick). In this configuration, is there a way to make both move at the same time cordially

finally I found I attached 2 images it was not necessary to take the option "send direct to fsuipc callibration"

well in the end the a32nx mod makes a ThrottleConfiguration.ini file automatically so you have to work on this file I put it as an attachment for the people it is interested in ThrottleConfiguration.ini

Thank you for your answers cordially

yes sorry for my english yes i use a translator unfortunately at the question I think you are saying the mod works with default MSFS assignments, but not when assigning in FSUIPC. Is this the case? Yes for the mod it's A32NX v0.5.2 but i will manage thanks for your time cordially

it works with the default mode of msfs but not with fsuipc you need which logs of all me I only had to check axes controls and a click on new log after having activated the gas commands for fsuipc but for msfs I do not know how to produce newspapers or if they do it automatically I do not know where it is found

these are the default axes of msmf 2020 I had never had a problem before version fsuipc 7.0.4 I even tried on a track with the engine running but no success on the msfs default image I only left that the GZ axis on profile luc I removed all the commands to be able to configure fsuipc I also did it on p3d I attach the .ini file the profile a320 and the images FSUIPC7.ini A320_MSFS.ini

on flybywire a320 the axes work on command by default on the GZ DZ axes but not on fsuipc

Well it is on the flybywire mod of the a320 that it does not work

Hello in msfs 2020 impossible to configure throttle axes on A320 neo on msfs I copy the profile by default and erase all the axis and key assignments so that there is no conflict I assigned the axes on the joy hotas warthog no problem the axes worked but not on the warthog throttles besides I uninstalled FSUIPC 7.0.5 try with the axes by default of msfs no problem it works reinstallation of FSUIPC but the throttle does not work I have attached the axis log cordially Luc Baron FSUIPC7.3.log

Hello Thank you for your answer, well I just reinstalled fsuipc 7.0.4 and the problem disappeared it was for the A320, B747, B787 for the A320 I had tried with the original and the A32NX mod and both did not work no moreover it no longer worked after stopping msfs2020 and stopping pc and when restarting the problem and appeared so I deduced that a file was broken during the stop Kind regards

Hello when I assign a button on my joystick the F7 key for the flaps they do not increment if I press the F7 key the flaps do not work either but if I uninstall FSUIPC 7.0.4 and restart msfs 2020 and that I press F7 the flaps are working normally. Kind regards Luc

Hello, I also don't know why two enter, I knew for INI FSUIPC but I really prefer the other file and besides msfs starts faster cordially

indeed there were 2 entries in the EXE.xml file so that I deleted it and by reinstalling fsuipc 7.0.0.4 the file is regenerated, other leaves I still use the old batch file / link desktop to start MSFS I just put fsuipc in a comment so that it does not start a second time I use this file to start another program at the same time as msfs because I find it well done

the solution for me was to delete EXE.XML in C: \ Users \ UserPcName \ AppData \ Local \ Packages \ Microsoft.FlightSimulator_8wekyb3d8bbwe \ LocalCache before uninstalling fsuipc then install version 7.0.0.4 and EXE.XML it will regenerate automatically

I don't have this error with FSUIPC 7.0.0.2

Hello each time MSFS 1.12.13.0 is started I have an error when starting FSUIPC 7.0.0.4 --------------------------- FSUIPC7 already running --------------------------- There is a copy of FSUIPC7 already running. This process will now exit. --------------------------- ok --------------------------- however I do not start FSUIPC since it starts with MSFS cordially Lb

Hello thank you for your answer, so it's like in fsuipc 6 too bad we can't put a comment at the end of the line it doubles the work too bad however it is marked You can add comments following a semicolon (;) at the end of the line, and these will be retaine ou I misunderstood cordially Luc

Hello you cannot always save comments in fsuipc 7 profiles 0 = PC, 6, K117,8 - {Key press: F6} - ; flaps save then restart fsuipc 7 0 = PC, 6, K117,8 - {Key press: F6} - the comment disappears it was like that in version 6 but it would be good to be able to add comments in a long file cordially Luc