[A320 Fenix Tiller Pedals Disconnect function not working properly]

And how can I assign the axis to my tiller axis?

[Fenix not working with TCA throttle]

Hello and SUCCESS,

I was so stupid to use axes control in old fashioned mode:. "Send direct to  FSUIPC Calibration" (before my PRESET experiments) ...

                          ... and selecting Throttle1   🥺

Now after doing it with your advise, the Fenix Throttles were working properly ...

                         ... and disabling the Calibration  😃

Now I can continue configuring my Fenix A320

All worked fine before all the Updates of MSFS and Fenix one year ago.

BTW I installed now the Version 7.4.6

Thanks again John,

         take care and greetings to Pete

 

 

[Fenix not working with TCA throttle]

Hello John, I tried to use your advises but the fenix throttle doesn't move proper.

When I use your preset "MY_FNX320_THROTTLE_LEFT_LEVER_SET" the throttle moves a litttle in a small range. Not acceptable.

            

Therefore I must know the syntax of  "@ 16384 + 32768 / 3 * 2 + 2 max 5 min (>L:A_FC_THROTTLE_LEFT_INPUT)"

What is the meaning of the numbers "16384 + 32768 / 3 * 2 + 2",    I know its RPN, but I do not understand.

I read all your proposed documents: RPN, FSUIPC user guide , for advanced users, MF HubHop and I didn't find the syntax of the calculator code.

So I tried to use SPAD.neXt . And now, surprisingly, I used the SPAD.NeXt tool with the configured assignment :  AND IT WORKS !

The fenix throttles move correctly !

Here the screenshots of SPAD.NeXt tool :

                         

and here the used Simconnect control :

 

                        

 

How can I use this SIMCONNECT function in FSUIPC7 ?

Thanks again for your continous help

 

[Fenix not working with TCA throttle]

Thanks for your quick response..

This are great informations, i will check now.

Thank you.

[Fenix not working with TCA throttle]

Hi John, I used the Beta, but TCA throttle still not working.

I tried to use the presets from HubHop but I must know more about the parameter structure of a preset, where can I read more about Preset Parameters ? How to configure Presets.

 

[Fenix not working with TCA throttle]

Thanks, John  for now ...

[Fenix not working with TCA throttle]

Hello John, I am still struggling with my FENIX and assigning my TCA throttle.

The throttle works fine with Beach Baron or Cabri Heli.

And the throttle works fine when I use the MSFS buildin controller options.

It is not working with FSUIPC7 V 7.4.5

What is going wrong ? What do you need as more information for trouble shooting?

I will prepare a Log File asap.

Btw: it worked some MSFS and Fenix versions earlier !

[Problems with helicopter throttle and turboprop condition lever]

Hi John, Thanks, this is exactly what I found also with the logging.

13=PA,10,C67497,0 -{ROTOR_GOV_SWITCH_OFF}-

14=PA,11,C67498,0 -{ROTOR_GOV_SWITCH_ON}-

15=PA,9,C66300,1    -{TOGGLE_STARTER1}-

17=PA,8,C66494,1    -{TOGGLE_FUEL_VALVE_ENG1}-

I failed to use

parameters 1/0 for on/off.

btw: have a great healthy 2024  😃 Pete also

 

 

[Problems with helicopter throttle and turboprop condition lever]

great, thanks John, and I try with logging events.

[Problems with helicopter throttle and turboprop condition lever]

hi John, are there new informations about the Guimbal Cabri G2 helicopter ?

I need the FSUIPC burtton assignement for rotor governor and Ignition switch. The standards in FSUIPC did not work.

 

[Volocopter throttle not working]

Thanks John. Take care, Thanks for your continuously HELP.

Alhard

[Volocopter throttle not working]

Great! Now it works. I didnt know that: Axis with Preset selection on the left-hand side is possible. I should have to read your Manuals more precisely  😃

Thanks.

--------------------------

I definitly have two "Community" folder  with the latest MSFS store version  1.32.7.0

One is here  on drive 😄

C:\Users\alhar\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\fsuipc-lvar-module\work  with FSUIPC_WASM.log

and the other is here on drive R:

R:\FS11\Community\fsuipc-lvar-module   with  FSUIPC_WASM.ini

and the FSUIPC7.ini  is here on drive T:   T:\__FS11 AddOns\__Tools\_FSUIPC\Program

Isn't that strange ? But this is my folder structure I am always using on my PC.

-----------------------------

Another question, which not a FSUIPC question, just asking your experience with the volocopter:

My "Garmin" doesn't animate altitude and speed, What is your "Garmin" showing?

---------------------------

Last simple question: What is your temperature outside your office?  😎

Alhard

[Volocopter throttle not working]

Hi John, here are my findings. I zipped the LOGs and INIs.

My installation paths are described in the PDF.

You can see, that I have two separate community folders.

I am curious about a solution.

Alhard

for John.zip Volocopter Issues.pdf

[Volocopter throttle not working]

Ok, I prepare everything asap ...

 

[Volocopter throttle not working]

Hi John, I move the Throttle and  FSUIPC_WASMIF.log  shows this:

Thu Apr 27 2023 12:31:22.092    [INFO]: **** Starting FSUIPC7 WASM Interface (WAPI) version 1.0.2 (WASM version 1.0.2) using connection -1
Thu Apr 27 2023 12:31:22.093    [INFO]: Connected to MSFS
Thu Apr 27 2023 12:31:22.093   [DEBUG]: Starting config request timer...
Thu Apr 27 2023 12:31:22.118   [DEBUG]: Config Data 0: name=FSUIPC_VNAME14, size=7504, type=0
Thu Apr 27 2023 12:31:22.118   [DEBUG]: Config Data 1: name=FSUIPC_lvalues0, size=8192, type=2
Thu Apr 27 2023 12:31:22.118   [DEBUG]: SIMCONNECT_RECV_ID_CLIENT_DATA received: EVENT_CONFIG_RECEIVED
Thu Apr 27 2023 12:31:22.118   [DEBUG]: CDA name FSUIPC_VNAME14 mapped to ID 4 [requestId=16]
Thu Apr 27 2023 12:31:22.118   [DEBUG]: Client data area created with id=4 (size=7504) [requestID=17]
Thu Apr 27 2023 12:31:22.119   [DEBUG]: Client data definition added with id=4 (size=7504)
Thu Apr 27 2023 12:31:22.119   [DEBUG]: CDA 'FSUIPC_VNAME14' with id=4 and definitionId=4 requested
Thu Apr 27 2023 12:31:22.119   [DEBUG]: CDA name FSUIPC_lvalues0 mapped to ID 5 [requestId=20]
Thu Apr 27 2023 12:31:22.119   [DEBUG]: Client data area created with id=5 (size=8192) [requestID=21]
Thu Apr 27 2023 12:31:22.119   [DEBUG]: Client data definition added with id=5 (size=8192)
Thu Apr 27 2023 12:31:22.119   [DEBUG]: CDA 'FSUIPC_lvalues0' with id=5 and definitionId=5 requested
Thu Apr 27 2023 12:31:22.132   [DEBUG]: EVENT_LVARS_RECEIVED:1 of 1: dwObjectID=0, dwDefineID=4, dwDefineCount=1, dwentrynumber=1, dwoutof=1
Thu Apr 27 2023 12:31:22.132   [DEBUG]: Calling Lvar CDAs loaded callback function...

 

The

shows this:

 9172 10528 Maximum number of custom events available is 1024 (defined by ini parameter MaxNumberOfCustomEvents)
     9172 10528 Aircraft="Volocity Microsoft"
     9219 System time = 27/04/2023 12:31:15, Simulator time = 12:42:04 (09:42Z)
     9219 10528 Button changed: bRef=0, Joy=2 (C), Btn=19, Pressed
     9219 10528 [Buttons.Volocity Microsoft] 2=PC,19,C65752,0
     9219 10528 FS Control Sent: Ctrl=65752, Param=0 PARKING_BRAKES
    16140 10528 -------------------- Starting everything now ----------------------
    16140 10528 Starting WAPI...
    16172 10528 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
    16187 18552 Lvars received: 134 L:vars & 0 H:vars now available
    16187 18552 Lvars/Hvars received - checking aircraft autos....
    55265 10528 ***  AXIS: Cntrl= 65763 (0x000100e3), Param= 0 (0x00000000) AXIS_AILERONS_SET
    55297 10528 ***  AXIS: Cntrl= 65763 (0x000100e3), Param= 363 (0x0000016b) AXIS_AILERONS_SET

......

56047 10528 ***  AXIS: Cntrl= 65762 (0x000100e2), Param= 528 (0x00000210) AXIS_ELEVATOR_SET
    56062 10528 ***  AXIS: Cntrl= 65762 (0x000100e2), Param= 0 (0x00000000) AXIS_ELEVATOR_SET
    56140 10528 ***  AXIS: Cntrl= 65763 (0x000100e3), Param= 0 (0x00000000) AXIS_AILERONS_SET
    56172 10528 ***  AXIS: Cntrl= 65763 (0x000100e3), Param= -1230 (0xfffffb32) AXIS_AILERONS_SET
    56187 10528 ***  AXIS: Cntrl= 65763 (0x000100e3), Param= 0 (0x00000000) AXIS_AILERONS_SET
   114453 10528 Executing preset 'Velocity Throttle' [10157]
   115734 10528 Executing preset 'Velocity Throttle' [10157]
   118109 10528 Executing preset 'Velocity Throttle' [10157]
   122375 10528 Executing preset 'Velocity Throttle' [10157]
   126422 10528 ***  AXIS: Cntrl= 65762 (0x000100e2), Param= -69 (0xffffffbb) AXIS_ELEVATOR_SET
   126437 10528 ***  AXIS: Cntrl= 65762 (0x000100e2), Param= -700 (0xfffffd44) AXIS_ELEVATOR_SET

Thats all

[Volocopter throttle not working]

Great thanks, I will check all.

[Volocopter throttle not working]

Thanks John,

but I am sorry , I was happy too early. I forgot to disable the MSFS Controls for my throttle, therefore it still works.

Now I disabled all standard MSFS controls and try to control with FSUIPC and you advice, Buit it didn't work .

I created all what you wrote above. In the log I can see that Velocity Throttle is activated, see below.

How can I troubleshoot what is happening.

Beside this problem I see in the LOG a running Parking Brake event

1707219 19908 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 1 (0x00000001) PARKING_BRAKES
  1707235 19908 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 1 (0x00000001) PARKING_BRAKES
  1707250 19908 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 1 (0x00000001) PARKING_BRAKES
  1707266 19908 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 1 (0x00000001) PARKING_BRAKES
  1707266 19908 Executing preset 'Velocity Throttle' [9506]
  1707281 19908 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 1 (0x00000001) PARKING_BRAKES
  1707281 19908 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 1 (0x00000001) PARKING_BRAKES

I disconnected all my USB controls, but it runs and runs. Where does it came from?

Thanks for your patience

 

 

[Volocopter throttle not working]

Hey, John, SUPER: it works fine, Thanks.

Now I am looking for the GARMIN to work in Volocopter, No speed, no altitude, no menu to activate.

I hope I will find out.

[Volocopter throttle not working]

Hi, I fly in MSFS the Volocopter, but in FSUIPC 7 the throttle is not working. With the original Control assignment in MSFS it works.

My stick for elevator and aileron works perfect.

What can I do?

[Conditional Axes/Button Programming]

Hi, in MSFS I use the Joystick for elevator and aileron as usual.

In the drone mode I can use my Jostick also for moving the drone back and forth , left and right,

With MSFS Controls this works perfect cause MSFS knows if I am in drone mode or in normal fligth mode.

Question: How can I do this with conditional axes programminmg and FSUIPC7?   Or with LUA?

 

[Introducing Pilot's Deck, a StreamDeck Plugin]

Hi Danielle (Fragtality), I am using FSUIPC since more then 10 years and want to use now your StreamDeck Plugin.

But it's not running. Here are my findings:

Version of Plugin = 0.7.6.0

Version of StreamDeck  =  6.0.2.17735

Excerpt of the LogFile with error message:

2022-12-21 12:05:45.702 [FTL] PLUGIN CRASHED

2022-12-21 12:05:45.703 [FTL] StreamDeckLib

2022-12-21 12:05:45.703 [FTL] commandLineArgs must be the commandline args that the StreamDeck application calls this program with.

2022-12-21 12:05:45.709 [FTL]    at StreamDeckLib.ConnectionManager.Initialize(String[] commandLineArgs, ILoggerFactory loggerFactory, IActionController actionController, IStreamDeckProxy streamDeckProxy)

at PilotsDeck.Plugin.Main(String[] args)

I checked all what you mentioned in your installation and troubleshoot manual.

My System is WIN10 PRO with 64GB RAM   and P3D and MSFS

The Log Files are attached

 

PilotsDeck20221221.zip StreamDeck0.zip

[Toggle between Views in P3D]

Great, I know a lot about LUA, but this is new to me. I used LUA often in the past years. Where is it documented?

Now I am using WindowManager ( https://www.desksoft.com/ ) for finding the FS Windows properties with success.

here I attach a screenshot of my early findings

Alhard

[Toggle between Views in P3D]

Hi John, thanks for your help. I think , I have tools for identifying FS WIndows.  I keep you informed.

So, another question in this context:

This is a part of my FSUIPC6.log :

   149265 LUA.3: beginning "P:\Modules\ah ChgFocus V2.lua"
   149406 Button changed: bRef=0, Joy=0, Btn=13, Released
   149406 [Buttons.Beech Baron 58 Paint1] 12=U0,13,CL11:K,0
   150812 Button changed: bRef=0, Joy=0, Btn=11, Pressed
   150812 [Buttons.Beech Baron 58 Paint1] 13=P0,11,CL7:R,0

I don't know what "CL11:K"  or  "CL7:R"  means. Didn't find in FSUIPC documentation.

Alhard

 

 

[Toggle between Views in P3D]

Hi John,  you answered in another thread

You said :

Posted 22 minutes ago

"FSUIPC only knows the window handle of the main P3D window, so it is not possible to give the focus to any other P3D window I'm afraid.

John"

Thanks for your quick response . So I have to continue my investigations, also with LUA.

 As I was a programmer and in earliear times a software developper,  I think there should be a solution.

I put my question also in the P3D forum.

Help is still welcome.

Alhard

 

[Toggle between Views in P3D]

Hi John, delay is ok. You are a business man, I am retired with much time. 😄

Now I have a new problem.

I want to set the focus on a P3D view. All focus functions in FSUIPC or LUA are changing WIN applications focus, but not a "sub window", a P3D view!

When I toggle between camera in a view, I first have to c!ick with the mouse on that view, that the view is getting focus.

Alhard