-
Posts
1,699 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Everything posted by jcboliveira
-
Virus downloading FSUIPC4
jcboliveira replied to marcofa's topic in FSUIPC Support Pete Dowson Modules
Some explanation. The anti irus could rely in signatures (see if inside the exe there is a match for the vírus pattern) or can also rely in heuristics. Heuristics is simply a nice word for common sense. The signature approach has some disadvantages, it only catch the virus after you update the database with that particular virus. The heuristic approach tries to overpass this problem by trying to guess if the file contains a virus, couldn’t find any information of how this is done. NOD32 is usually considered one of the best anti virus (maybe only surpassed by Kaspersky) however it can also raises the false alarms. In this case what you have to do is: - Temporarily disable IMON and AMON; - D/L FSUIPC - Unzip it (if you have problem right click, properties and unblock); - Install FSUIPC Enable AMON and IMON. You will notice that AMON will not detect FSUIPC.dll has a virus after install. José Oliveira -
FSUIPC 4 - Virus Warning on NOD32
jcboliveira replied to flouid's topic in FSUIPC Support Pete Dowson Modules
The problem is the NOD32 heuristics. It's a false alarm. Disable AMON and IMON during FSUIPC D/L and install. If you still have problems, right click in the zip and click in unblock. Hope this helps José -
Hi Pete, Is always nice to came to your "place" Just checked my site were I keep everything organized and I believe that the D/L was done in some place were the version isn't right. This is the correct version http://splashclub.org/jcboliveira/programs/iwillbeback.zip Regards José
-
There are some programs that I never requested a freeware key. José
-
Changing Aircraft weights
jcboliveira replied to scruffyduck's topic in FSUIPC Support Pete Dowson Modules
I believe that you can find somewhere in the forum a post by for the same subject. After some tries reverted to the normal cfg weights writting and remote aircraft reload . José -
Module Design for fs2004
jcboliveira replied to jgermana's topic in FSUIPC Support Pete Dowson Modules
Here it is a start: http://www.gamedev.net/reference/progratures/gui/ And good luck with it, personally I gave up :) José -
New IVAP offsets and FSUIPC
jcboliveira replied to Dylan's topic in FSUIPC Support Pete Dowson Modules
You could on the next IVAP revision include offset 0x7b80 I'm using it to test if SB3 is present and activate the transponder operation. José Oliveira -
Problem with FSD Cheyenne Engine Start
jcboliveira replied to Flaps30's topic in FSUIPC Support Pete Dowson Modules
I have FS9.1 latest FSUIPC and no problem with that plane. You could check what addons you have in the modules directory. The easy way is to sorte all the files by date. You will see a lot of them with the same date, those are FS9 modules. The others are the addons modules. Move the others from the directory and trie. Don't know why but I think it could be a registry problem. Open regedit and search for C400Loadout, bellow this key there is a key called version 3.0, see if the dwords for PortEngineDamaged and StarbdEngineDamaged are 0. José Oliveira -
Traffic IVAO IvAp and Project Magenta
jcboliveira replied to robvanleest's topic in FSUIPC Support Pete Dowson Modules
It's easy. AIBridge has the source available on request, it seems to work with Project Magenta tell IVAP developers to see the AIBridge source. As you can understande since I'm not a IVAP user or project magenta I can't help you. José Oliveira -
Using MSFS as scenery viewer
jcboliveira replied to bobSamuels's topic in FSUIPC Support Pete Dowson Modules
GPL means General Public License the most famous is the GNU GPL. For a list of licenses: http://www.gnu.org/licenses/license-listroduction Regards José -
Fs9.exe and FSUIPC and the patch
jcboliveira replied to daveg4otu's topic in FSUIPC Support Pete Dowson Modules
Dave Are you using the no cd exe? Maybe that is the problem. José -
For some users there is a sudden yoke and/or pedals disconnect if they are using windows XP drivers. It's not related to USB power (but just in case check if the option is unchecked and if the consuption is bellow the maximum). Usually the CH control manager install solves the problems. See if that can helps. José
-
FSUIPC and PMDG 737 ACARS
jcboliveira replied to Fly737NG's topic in FSUIPC Support Pete Dowson Modules
"I am running a virtual airline, but I want to cut down my fleet to the 737NG. I´d like to know if there is a possibility to read out the ACARS information and send it directly to my cgi based database for the pilots rooster. No filling of pilot reports anymore (this is obsolete these days I think)." As far I know there isn't any SDK available from PMDG that will allow you that. Of course you can make (or use) a program that produces the acars messages. José Oliveira -
AIBridge won't work with free code
jcboliveira replied to Henning Huelsebusch's topic in FSUIPC Support Pete Dowson Modules
You can find all my software at: http://jcboliveira.flysplash.org Inclunding the FS2002 (2.4) and FS2004 (3.0) AIBridge version. It seems that is not known enougth. Did a google at josé Oliveira aibridge and found some entries. José Oliveira -
Tail lights and panel lights the same switch?
jcboliveira replied to psouthan's topic in FSUIPC Support Pete Dowson Modules
By light sources I meant effects emitters specified in the aircraft.cfg. These emitters are then connected to those 10 switches. Like 2 emitters for logo, 2 emitters for landing, etc Regards José -
Tail lights and panel lights the same switch?
jcboliveira replied to psouthan's topic in FSUIPC Support Pete Dowson Modules
That is not a FS problem more a plane problem. In fact the tail Logolight, Landing light, Wing light etc are separated (I believe there are 19 possible light sources specified by MS SDK). In some planes you have the overhead switches working as they should. But the some producers (don't ask me why) choose to use the logo light in the texture and not using effects. Same goes for wing light etc. It's possible to change the planes to reflect the proper lights but it takes a lot of work. If you look at AVSIM you can find packages made for the 737 default. José -
Hi I know that is inefficient and I could pass the FSUIPC class address to the DLL as I did in the loader plug-in that I was trying to do, avoiding the double open, the only thing is that I don't have control over the dll code. Let's see if someone starts to do plug-ins. Tested the positions and didn’t detect any change. It could be a good method to change the plane weight, since it avoids the aircraft reloads that the loaders need. As far I saw it preserves the distances specidfed in the aircraft.cfg wich is good also. Thanks again José
-
I have a program called FSAcars. This program uses FSUIPC. In this version it accepts plugins (dll that the program calls). This dll can also use FSUIPC. 1- Since the dll aren't made by me and not my responsability if they use FSUIPC then they should manage FSUIPC calls if they want to use it. 2 - The FSUIPC open function uses a file with the name given by the process name (to ensure that is unique) plus the retry name. The problem is that the dll and the program bellong to the same process so the name is the same. To ensure that there isn't any problem this name must be changed. The original file name in the DLL = program file name: wsprintf(szName, FS6IPC_MSGNAME1 ":%X:%X", GetCurrentProcessId(), nTry); The new name in the DLL wsprintf(szName, FS6IPC_MSGNAME1 ":%X:%X:DLL", GetCurrentProcessId(), nTry); A different problem: offset 1400 payload changes. Noticed that it only changes the aircraft weight reported by FSUIPC if you go in to "Change Payload menu" and press ok . Without pressing the ok the plane weight reported by FSUIPC stays the same as before the offset 1400 write. Thanks José
-
Hi Pete Hope you are ok. It depends in the way you move the my documents. Some solutions don't update all the registry settings. José
-
Did you changed the My documents folder from it's original position? José
-
Problem with AIBridge
jcboliveira replied to Matt Falke's topic in FSUIPC Support Pete Dowson Modules
Please contact me by mail. I have a FS2004 version with password support for testing. Thanks José Oliveira