Guest Manolo Velez Posted March 27, 2003 Report Share Posted March 27, 2003 Hi ! I have created a MCP panel using IOCARDS designs. (http://www.telefonica.net/web/simuexperiencias). But, i not find offset of fsuipc that gives the necessary information me that AP DISENGAGE is pressed, and I cannot therefore activate the corresponding LED of my panel. Somebody knows in that site of fsuipc inquires into the that state? Thanks. Link to comment Share on other sites More sharing options...
Pete Dowson Posted March 27, 2003 Report Share Posted March 27, 2003 i not find offset of fsuipc that gives the necessary information me that AP DISENGAGE is pressed, and I cannot therefore activate the corresponding LED of my panel. FS does not simulate a separate A/P disengage control, only the A/P on/off switch itself (as operated by the Z key by default, or the A/P switch in the gauges). The offset for the switch state is 07BC (A/P Master Switch). If you have built an MCP with a disengage switch/bar then the logic should switch the AP master off, if it is on, and, if you have a LED as you say, light it. When the Disengage switch is in the Off position you should of course disable your AP button(s). Regards, Pete Link to comment Share on other sites More sharing options...
Guest Manolo Velez Posted March 28, 2003 Report Share Posted March 28, 2003 Sorry, i want to control MCP, Proyect Magenta software. Link to comment Share on other sites More sharing options...
guru Posted March 30, 2003 Report Share Posted March 30, 2003 Dear Manolo, bad news: I tried to find the appropriate offset for hours now but had no luck. Maybe I looked at the wrong place? Anyway, I think it's time for an email to Enrico Schiratti. Maybe he can help?! Bye, Michael PS: Please let us know if you make any efforts. Link to comment Share on other sites More sharing options...
StuartWhelan Posted March 30, 2003 Report Share Posted March 30, 2003 On the Project Magenta site there is a PMOffsets document that lists the FSUIPC offets to access project Magenta info, including the states of all three autopilots and the AP Disconnect bar. Link to comment Share on other sites More sharing options...
guru Posted March 30, 2003 Report Share Posted March 30, 2003 I have to admit that Stuart is right. But when using FSinterrogate with MCP I don't see any change in the appropriate offsets... So long, Michael Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now