Jump to content
The simFlight Network Forums

FS9 Modules problem


Recommended Posts

I recently installed an upgrade for a payware aircraft. It appeared that this installation corrupted part of FS9 and I eventually opted to uninstall and re-install FS9. (This may have been a bad choice). Now I am re-installing scenery and aircraft. I am having problems installing FSUIPC 3.53 in FS9. (I had the 3.45 up grade for registered Version FSUIPC 3). The problem is that I cannot get the “Modules” item to show in the flight screen menu. Please note the following:

1. I believe that the FSUIPC.dll is properly installed in the FS9 Modules file. At least it is setting there and shows 224 KBs in the properties.

2. I have made certain that, as far as I can tell, there are no multiple copies of the FSUIPC.dll in the Modules folder or anywhere in my FS9 file. This includes any re-named.

3. Task Manager does not show that there is anything else running and that is not fully terminated.

4. I am not running Window Screens.

5. FSUIPC was running fine before I reinstalled FS9.

I would apprediate it if Pete or someone can figure out what I have done wrong so that I can get my FSUIPC up and running. Thanks, Ted

Link to comment
Share on other sites

I am having problems installing FSUIPC 3.53 in FS9. (I had the 3.45 up grade for registered Version FSUIPC 3). The problem is that I cannot get the “Modules” item to show in the flight screen menu.

Is there an FSUIPC.LOG or FSUIPC.INI file also in the FS Modules folder? If so, can you show me the Log file contents please?

I've never heard of a case yet where, with FSUIPC installed, you don't get a Modules menu, containing the FSUIPC entry at least.

Regards,

Pete

Link to comment
Share on other sites

Hi Pete,

At the time that I read your reply, I checked and did not have a FSUIPC.ini or a FSUIPC.log file. I must have deleted them when I was trying to remove any duplicates or re-names. I found them in the Recycle bin and restored them, however I still can't get "Modules" to show in the FS9 flight screen. I hope that you can figure out where I went stupid. I am attqching my FSUIPC.LOG file. Thanks

Link to comment
Share on other sites

Hey Pete, I don't know whether I got my .LOG file to attach. Here it is.

********* FSUIPC, Version 3.53 by Pete Dowson *********

Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL)

User Name="Ted Harris"

User Addr="tedmail@eoni.com"

FSUIPC Key is provided

WIDEFS not user registered, or expired

Module base=61000000

ClassOptions: UIPCMAIN=FF7F, FS98MAIN=FF7F, FS2KMAIN=FF5E

WeatherOptions(Orig)=4000B72F[4000B72F]

InitDelay: 0 seconds

WeatherReadInterval=4

LogOptions=00000001

DebugStatus=15

10063 System time = 08:19:05

10078 F:\Microsoft Games\Flight Simulator 9\

10078 System time = 08:19:05, FS2004 time = 12:00:00 (00:00Z)

22156 C:\Documents and Settings\Ted\My Documents\Flight Simulator Files\Default Seatac with Archer.flt

22328 AIRCRAFT\Flight One PA-28\PA-28-181.air

22906 Aircraft="PIPER PA-28-181 Archer DREAM FLEET - 1"

32375 Module [M1] identified = "sb3gaugebridge.dll"

32375 Module [M1] "sb3gaugebridge.dll" access registration is okay

32375 Module [M2] identified = "ActiveRadar.dll"

32375 Module [M2] "ActiveRadar.dll" access registration is okay

33422 Advanced Weather Interface Enabled

67078 AIRCRAFT\Emma_C172\Cessna172SP.air

67719 Aircraft="Cessna Skyhawk 172SP SkyJumper"

73875 C:\Documents and Settings\Ted\My Documents\Flight Simulator Files\UI generated flight.flt

74516 Clear All Weather requested: external weather discarded

219344 Traffic File #16 = "scenery\world\scenery\traffic030528"

225703 Traffic File #22 = "scenery\world\scenery\traffickpwt"

248750 AIRCRAFT\Aerosoft Beaver Amphibian\DHC-2A.air

249391 Aircraft="DHC-2A C-GSKY"

283422 AIRCRAFT\Aerosoft Beaver Standard Wheels Modern\DHC-2W.air

284063 Aircraft="DHC-2W N130WA Modern"

441235 AIRCRAFT\beech_baron_58\Beech_Baron_58.air

441875 Aircraft="Beech Baron 58"

508422 AIRCRAFT\DreamFleet A36\BonanzaA36_2k4v2.4.air

509063 Aircraft="DreamFleet Beech Bonanza A36"

639641 AIRCRAFT\Flight One PA-28\PA-28-181.air

640360 Aircraft="PIPER PA-28-181 Archer DREAM FLEET - 1"

721563 AIRCRAFT\mooney_bravo\Mooney_Bravo.air

722250 Aircraft="Mooney Bravo"

953781 AIRCRAFT\182_Nav_Trainer\Cessna172SP.air

954438 Aircraft="C182 Nav Trainer"

1016000 AIRCRAFT\cessna195_TT\cessna195_TT.air

1016672 Aircraft="Cessna 195 with Tundra Tires"

1055594 AIRCRAFT\c182\Cessna182S.air

1056266 Aircraft="Cessna Skylane 182S Paint2"

1091860 AIRCRAFT\lear45\Lear45.air

1092516 Aircraft="Learjet 45 Limited Edition"

1199141 AIRCRAFT\c172\Cessna172SP.air

1199781 Aircraft="Cessna Skyhawk 172SP IFR"

1264328 AIRCRAFT\C208\Cessna208.air

1264953 Aircraft="Cessna 208 Caravan Amphibian Paint1"

1323250 System time = 08:40:59, FS2004 time = 08:29:04 (16:29Z)

1323250 *** FSUIPC log file being closed

Memory managed: 2 Allocs, 11276 Freed

********* FSUIPC Log file closed ****

Link to comment
Share on other sites

At the time that I read your reply, I checked and did not have a FSUIPC.ini or a FSUIPC.log file. I must have deleted them when I was trying to remove any duplicates or re-names. I found them in the Recycle bin and restored them, however I still can't get "Modules" to show in the FS9 flight screen.

Oh dear. You shouldn't restore them. They aren't installable. They are two files which are always automatically produced when FSUIPC runs. If FSUIPC is loaded by FS, those two files will be created. If it isn't being loaded then those two won't be created. It was a way of trying to determine if FS was loading FSUIPC!

Regards,

Pete

Link to comment
Share on other sites

Hey Pete, I don't know whether I got my .LOG file to attach. Here it is.

When was this created? Was this created just, when you tried to run FS again, or is this just an old one from your recycle bin?

Please delete the Log and INI file from the FS Modules folder, then run FS, see the fact that the Modules menu entry is missing, close FS, THEN look in the FS modules folder to see if there's now a newly created Log and INI file.

If there isn't then the file named FSUIPC.DLL which you say you have in the FS Modules folder is not FSUIPC. Best thing to do is delete it and download a new copy. Or even try the 3.536 version available above.

Regards,

Pete

Link to comment
Share on other sites

That was a previous LOG file.

As you have directed, I deleted the LOG and INI files that I had transfered. I then run FS9. the "Modules" menu entry was still missing. I then looked in the FS9 Modules folder and found that no LOG or INI files had been created. I downloaded the latest FSUIPC 3.5.3 version, and installed it. I got the same results.

I had a BUP version of the modules file that I had saved Dec 28, 2005. I know positively that this version was working. I replaced the present FS9 Modules folder with this one. I had the same results as no Modules Menu was showing in the FS9 flight screen.

I appreciate your patience in this and hope that you can determine what I am doing wrong.

Link to comment
Share on other sites

I then looked in the FS9 Modules folder and found that no LOG or INI files had been created. I downloaded the latest FSUIPC 3.5.3 version, and installed it. I got the same results.

Are you SURE that the copy of FS9 you are actually running is the one which corresponds to that modules folder? I know it sounds like a stupid question, but, believe me, it has happened before. Folks have clicked on a shortcut to FS and later found that it was running one from a different folder, not the place they were thinking of at all!

To be sure, run FS9 by going to the parent folder of the Modules folder you have been talking about, and doubleclicking on the FS9.EXE file there.

If that gives the same result, please show me a listing of the Modules folder directory. You can get one of those either by taking a snapshot (ALT Prt SCR) and including the picture, or probably easier by unzipping the BAT file from the attached ZIP into the modules folder in question, then executing it by a double click. It will make a little file "dir.txt". Just include it in a message here. This shows all the DLLs in that folder.

Regards,

Pete

ListDir.zip

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.