timcook Posted October 31, 2008 Report Share Posted October 31, 2008 Hi Peter First of all can I say how wonderful I have found your macro facility. However, I can't get any of my macros to work in FSUIPC version 4.329, whereas if I revert to version 4.325 they all are fine. Please let me know if you need any more details, Tim Link to comment Share on other sites More sharing options...
Pete Dowson Posted October 31, 2008 Report Share Posted October 31, 2008 However, I can't get any of my macros to work in FSUIPC version 4.329, whereas if I revert to version 4.325 they all are fine. Please let me know if you need any more details Please first try the current interim release, 4.331. If still no joy, please show me the [MacroFiles] and the relevant [Keys], [Axes] or [buttons] section of the INI file (i.e, wherever you've assigned the macros). I'm afraid I'm away this weekend (at the Lelystad do), but if you provide the information I'll get to it on Monday if I run out of time today, which is likely. Regards Pete Link to comment Share on other sites More sharing options...
timcook Posted October 31, 2008 Author Report Share Posted October 31, 2008 Hi Pete I tried version 4.331 and still the same problem. Here's the [MacroFile] - the file is called @.MCRO [Macros] Module="MAAM_R4D.GAU" 1=Nav=RX640c*X5500 2=Beacon=RX63e5*X5500 3=landing lights=RX63be*X5500 4=Cabin lights=RX6349*X5500 5=NAC lights=RX6370*X5500 6=Panel lights=RX6322*X5500 7=Battery=RX5b4f*X5500 8=Gen left=RX5b76*X5500 9=Gen right=RX5b9d*X5500 10=Anti ice 1=RX5bc4*X5500 11=Anti ice 2=RX5c6c*X5500 12=Defrost=RX5d14*X5500 13=Pitot left=RX5d44*X5500 14=Pitot right=RX5d6b*X5500 15=Prime left=RX5dfb*X5500 16=Start left=RX5efd*X5500 17=Vib left=RX5e49*X5500 18=Prime right=RX5e22*X5500 19=Start right=RX5f81*X5500 20=Vib right=RX5ea3*X5500 21=Fuel pump left=RX6005*X5500 22=Fuel pump right=RX6048*X5500 23=Radio master=RX616b*X5500 24=Seat belts=RX61c2*X5500 25=No smoking=RX61f2*X5500 26=Call=RX6252*X5500 27=Mag left anti=RX58a7*X5500 28=Mag left clock=RX58a7*X5500,31 29=Mag right anti=RX59fb*X5500 30=Mag right clock=RX59fb*X5500,31 31=Fuel left anti=RX4c09*X5500 32=Fuel left clock=RX4c09*X5500,31 33=Fuel right anti=RX4d28*X5510 34=Fuel right clock=RX4d28*X5510,31 39=Nav lights=RX640c*X5500 40=Beacon lights=RX63e5*X5500 41=Parking brake=RX4e6e*X5500 Module1="Gauge018.GAU" 35=Cowl left close=R1:X220a*X5500 36=Cowl left open=R1:X220a*X5500,31 37=Cowl right close=R1:X22f5*X5500 38=Cowl right open=R1:X22f5*X5500,31 Here's the [buttons] section of the INI file [buttons] 1=P1,0,K68,8 2=U1,0,K66,8 3=P1,2,C65564,0 4=P1,3,C66172,0 5=R3,10,C66542,0 6=R3,11,C66543,0 8=P1,1,C65580,0 9=P2,24,C66389,2 10=R3,2,C66435,0 11=R3,3,C66434,0 12=R3,4,C66441,0 13=R3,5,C66439,0 14=R3,6,C66446,0 15=R3,7,C66445,0 16=R3,8,C66450,0 17=R3,9,C66449,0 18=R1,4,C65663,0 19=R1,5,C65662,0 20=R1,7,C65664,0 21=R1,6,C65665,0 26=P2,23,K72,8 28=P2,22,CM3:13,0 29=P2,8,CM3:28,0 31=P2,5,CM3:3,0 32=P2,12,CM3:25,0 35=P2,13,CM3:24,0 36=P2,3,CM3:38,0 41=P2,20,CM3:21,0 42=P2,19,CM3:20,0 44=P2,28,CM3:31,0 45=P2,21,CM3:0,0 47=P2,10,CM3:30,0 48=P2,4,CM3:4,0 50=P3,0,C65913,0 51=P3,1,C65914,0 52=P1,8,K36,8 53=P1,9,K35,8 54=P2,0,CM3:35,0 55=P2,1,CM3:36,0 56=P2,2,CM3:37,0 57=P2,7,CM3:27,0 58=P2,9,CM3:29,0 62=P2,29,CM3:32,0 63=P2,25,K69,9 65=P2,17,CM3:18,0 66=P2,30,CM3:33,0 67=P2,18,CM3:19,0 68=P2,31,CM3:34,0 70=P2,27,CM3:41,0 73=U2,4,CM3:6,0 76=R1,32,C65893,0 77=R1,36,C65892,0 78=R1,38,C65880,0 79=R1,34,C65879,0 81=P2,26,CM3:8,0 82=U2,20,CM3:22,0 85=U2,26,CM3:9,0 86=U2,22,CM3:14,0 90=P2,6,CM3:40,0 91=U2,6,CM3:39,0 92=U2,12,CM3:26,0 93=U2,13,CM3:26,0 94=P2,14,CM3:15,0 95=P2,15,CM3:16,0 96=P2,16,CM3:17,0 98=U2,25,K50,8 99=P2,11,CM3:7,0 100=U2,11,CM3:23,0 Here's the [MacroFiles] section of the ini file [MacroFiles] 1=747 OHD 2=APchart 3=@ The macro is for the MAAM DC-3, which I know you don't have. Let me know if you need anything more, Tim Link to comment Share on other sites More sharing options...
paulnd Posted October 31, 2008 Report Share Posted October 31, 2008 Hello Pete, I have the same problem in FS9. My macros don't work in versions 3.848 and 3.847 but if I revert to 3.845 all is ok. regards Paul [buttons] 1=R2,2,C65607,0 2=R2,3,C65615,0 3=P4,20,CM1:41,0 4=P4,21,CM1:40,0 5=P4,19,CM1:42,0 6=P4,29,CM1:39,0 7=P4,14,CM1:37,0 8=P4,12,CM1:36,0 9=P4,24,CM4:7,0 10=P4,26,CM4:8,0 11=P0,0,C65752,0 12=P3,4,C65759,0 13=P3,5,C65758,0 14=W0BC8=32767 P6,1,K54,15 15=W0BC8=32767 P6,0,K49,15 16=W0BC8=32767 P6,12,K55,15 17=W0BC8=32767 P6,13,K50,15 18=W0BC8=32767 P6,14,K56,15 19=W0BC8=32767 P6,15,K51,15 20=W0BC8=32767 P6,16,K57,15 21=W0BC8=32767 P6,17,K52,15 22=W0BC8=32767 P6,6,K223,15 23=W0BC8=32767 P6,7,K53,15 24=W0BC8=32767 P6,8,K112,15 25=W0BC8=32767 U6,8,K114,15 26=W0BC8=32767 P6,9,K113,15 27=P6,18,CM1:6,0 28=P6,19,CM1:5,0 29=P6,20,CM1:8,0 30=P6,21,CM1:7,0 31=P6,23,CM1:10,0 32=P6,22,CM1:9,0 33=P6,30,CM1:12,0 34=P6,31,CM1:11,0 35=P6,2,CM1:14,0 36=P6,3,CM1:15,0 37=P6,4,CM1:16,0 38=P6,5,CM1:17,0 39=P5,5,CM1:3,0 40=P5,4,CM1:4,0 41=P5,3,CM1:2,0 42=P5,2,CM1:1,0 43=P5,7,CM1:21,0 44=P5,9,CM1:22,0 45=P5,8,CM1:23,0 46=P5,6,CM1:24,0 47=P5,1,CM3:1,0 48=P5,0,CM3:2,0 49=P5,19,CM1:26,0 50=P5,18,CM1:25,0 51=P5,21,CM1:28,0 52=P5,20,CM1:27,0 53=P5,23,CM1:30,0 54=P5,22,CM1:29,0 55=P5,10,CM1:31,0 56=P5,11,CM1:32,0 57=P5,12,CM1:33,0 58=P5,13,CM1:34,0 59=P5,14,CM1:35,0 60=P4,25,CM1:44,0 61=P4,28,CM1:38,0 62=P4,18,CM1:43,0 63=P0,2,K70,11 64=P0,4,K88,11 67=P3,2,K65,8 68=P3,0,K88,10 69=P2,0,K90,10 70=P2,1,K90,8 71=P2,4,K88,10 [MacroFiles] 1=747_PMDG_OVH 2=747_PMDG_CONS 747_PMDG_CONS.MCRO [Macros] Module="PMDG_747400_Main.GAU" 1=AUTOBR INCR=RXe410*Xa190,31 2=AUTOBR DECR=RXe410*Xa190 747_PMDG_OVH.MCRO [Macros] Module="PMDG_747400_Overhead.GAU" 1=APU INCR=RX3960*X5390,31 2=APU DECR=RX3960*X5390 3=APU GEN 1=RX3890*Xf790 4=APU GEN 2=RX3850*Xf790 5=HYD DEM 1 INCR=RX48a0*X5390,31 6=HYD DEM 1 DECR=RX48a0*X5390 7=HYD DEM 2 INCR=RX4830*X5390,31 8=HYD DEM 2 DECR=RX4830*X5390 9=HYD DEM 3 INCR=RX47c0*X5390,31 10=HYD DEM 3 DECR=RX47c0*X5390 11=HYD DEM 4 INCR=RX4750*X5390,31 12=HYD DEM 4 DECR=RX4750*X5390 13=ENG 4 START=RXa070*X8b90 14=HYD ENG 1=RX49a0*X8b90 15=HYD ENG 2=RX4970*X8b90 16=HYD ENG 3=RX4940*X8b90 17=HYD ENG 4=RX4910*X8b90 18=ENG 1 START=RX9fe0*X8b90 19=ENG 2 START=RXa010*X8b90 20=ENG 3 START=RXa040*X8b90 21=ENG 1 IGN=RX9fe0*X8b90 22=ENG 2 IGN=RXa010*X8b90 23=ENG 3 IGN=RXa040*X8b90 24=ENG 4 IGN=RXa070*X8b90 25=PACK 1 INCR=RX54d0*X5390,31 26=PACK 1 DECR=RX54d0*X5390 27=PACK 2 INCR=RX5550*X5390,31 28=PACK 2 DECR=RX5550*X5390 29=PACK 3 INCR=RX6890*X5390,31 30=PACK 3 DECR=RX6890*X5390 31=ENG 1 BLEED=RX5810*X8b90 32=ENG 2 BLEED=RX6d40*X8b90 33=APU BLEED=RX6ce0*X8b90 34=ENG 3 BLEED=RX57e0*X8b90 35=ENG 4 BLEED=RX6d10*X8b90 36=LIGHT LAND OUT=RX8f10*X8b90 37=LIGHT LAND INB=RX8f40*X8b90 38=LIGHT R TOFF=RX8ee0*X8b90 39=LIGHT TAXI=RX8eb0*X8b90 40=LIGHT BEACON=RX8e80*X8b90 41=LIGHT NAV=RX8e50*X8b90 42=LIGHT STROBE=RX8e20*X8b90 43=LIGHT WING=RX8df0*X8b90 44=LIGHT LOGO=RX8dc0*X8b90 Link to comment Share on other sites More sharing options...
Pete Dowson Posted October 31, 2008 Report Share Posted October 31, 2008 I have the same problem in FS9. My macros don't work in versions 3.848 and 3.847 but if I revert to 3.845 all is ok. Okay, found and fixed. I'll upload the fixed version later today (3.849). Regards Pete Link to comment Share on other sites More sharing options...
timcook Posted November 1, 2008 Author Report Share Posted November 1, 2008 Mant thanks Pete, version 4.332 is fine. Tim Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now