cfox101 Posted October 31, 2009 Report Share Posted October 31, 2009 Registered FSUIPC V3 & V4.53 installed on same computer - diferent drives with FSC8 FSUIPC V3 OK V. 4 installs but get message: My signiture check fails on installed FSUIPC4.DLL Check that I am not listed as untrusted publisher in Internet Explorer. No untrusted publishers listed in I.E. using XP SP3 FSX SP1 & 2 Have log file PLEASE HELP Link to comment Share on other sites More sharing options...
Pete Dowson Posted October 31, 2009 Report Share Posted October 31, 2009 V. 4 installs but get message:My signiture check fails on installed FSUIPC4.DLL Check that I am not listed as untrusted publisher in Internet Explorer. No untrusted publishers listed in I.E. using XP SP3 FSX SP1 & 2 Have log file PLEASE HELP Strange because FSUIPC 3.93 (the currently supported version) uses the same signature as FSUIPC 4.53. Show me the Install log file, please. It's a text file, you can paste its contents into a message here. This suggestion was also posted by another user recently: Go to fsx folder -> modules and right click on Fsuipc4.DLL and select "security" -> instal the certificate in "approved certificate folder" and retry the installation of FSUIPc4. all it's okay !!! Regards Pete Link to comment Share on other sites More sharing options...
B42L8 Posted November 1, 2009 Report Share Posted November 1, 2009 I have just installed my copy of v4, into FSX on W7, , registered it and then had problems starting W7, read one of your posts and it said it would be fixed withthe latest patch..........I loaded the v4.53 and dragged it into the v4 installed, is this the right way to do it??..........must have worked as the W7 sstarts up with no problems............but, the registered copy that shows up in FSX says it is still v4 (shouldn't it say 4.53??)............... also does not show th "sync pos" to calibrate.....thanks for the help!!! B42L8 Link to comment Share on other sites More sharing options...
Pete Dowson Posted November 1, 2009 Report Share Posted November 1, 2009 I have just installed my copy of v4, into FSX on W7, , registered it and then had problems starting W7, read one of your posts and it said it would be fixed withthe latest patch Problems starting Windows 7? I don't know of anything about that. ..........I loaded the v4.53 and dragged it into the v4 installed, is this the right way to do it?? Dragged what, precisely? Version 4.53 comes as an Installer, which you have to run. "no dragging". ..........must have worked as the W7 sstarts up with no problems. Nothing in any of my software can have any possible affect on whether Windows 7 will start correctly or not. Windows has to be properly running long before you even run FS, let alone anything of mine! ...........but, the registered copy that shows up in FSX says it is still v4 (shouldn't it say 4.53??) There's never ever been just a "Version 4". that's the generic name, to distinguish it from "Version 3". All versions 3.000 to 3.999 are "version 3", and all versions 4.000 to 4.999 are "version 4". It's like saying "windows 7", which could be any one of a number of builds of Windows 7! I don't know where you are reading "version 4", but the real version number will be shown in the main "about" tab in the options. You can also find it in the Log file, and in the DLL properties-details. ............... also does not show th "sync pos" to calibrate. Do you mean the new facility added recently? That isn't in 4.53. For that you must download the latest update from the Updates announcement above. There's 4.546 there now. Pete Link to comment Share on other sites More sharing options...
B42L8 Posted November 1, 2009 Report Share Posted November 1, 2009 Thanks for the help, got the .53 installed as should be and also the latest..........now to start FSx and test her out.........Super responceQQ B42L8 Link to comment Share on other sites More sharing options...
B42L8 Posted November 2, 2009 Report Share Posted November 2, 2009 Just another quick question, I installed both the patches, (I hope done correct), when I click on the FSX addons, and get the FSUIPC page, should the registered copy say 4.546?? And have the "Sync Pos" for calibration??.............So far, your suggestion to "Set" the lever with the same number as the adjacent lever, keeps the virtual levers in the same position,,,,,,,,,,,,,,thanks for that fix!! B42L8 Link to comment Share on other sites More sharing options...
Pete Dowson Posted November 2, 2009 Report Share Posted November 2, 2009 Just another quick question, I installed both the patches, (I hope done correct) Sorry, what patches? You mean SP1 and SP2 for FSX? when I click on the FSX addons, and get the FSUIPC page, should the registered copy say 4.546?? If you put FSUIPC 4.546 into the FSX Modules folder and it loaded correctly, it will say 4.546 in the About tab in the menu, and in the Log file, and it will show that version in its Properties-Version details. Whether it is registered or not makes no difference. Registration doesn't change the version number. And have the "Sync Pos" for calibration?? The Sync Pos facilities have been available on the 4 throttles, 4 prop pitches and 4 mixtures pages for several versions now, including 4.546. Regards Pete Link to comment Share on other sites More sharing options...
B42L8 Posted November 3, 2009 Report Share Posted November 3, 2009 I meant the patch to get the 4.546 onto the Modules, ..........O must have done it wrong as it does not say that, will try again........thanks again B42L8 Link to comment Share on other sites More sharing options...
Pete Dowson Posted November 3, 2009 Report Share Posted November 3, 2009 I meant the patch to get the 4.546 onto the Modules Er .. you just unzip the FSUIPC4546.zip file into the FSX Modules folder. Let it replace the one that's there. It isn't "patching", merely a rpelacement DLL. Pete Link to comment Share on other sites More sharing options...
cfox101 Posted November 3, 2009 Author Report Share Posted November 3, 2009 NOTE: Installed Win7 on new drive and new install of all programs and everything is FINE Thanks for prompt response Installer for FSUIPC4.DLL version 4.53 Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath" ... >>> OK! FOUND FSX! <<< ... Looking in registry for ESP install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft ESP\1.0 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft ESP\1.0 Parameter"AppPath" ... NOT found! ... =========================================================== INSTALLATION FOR FSX: AppPath="J:\Program Files\Microsoft Games\Microsoft Flight Simulator X\" Checking version of FSX.EXE: ... Version 10.0.61472.0 (Need at least 10.0.60905.0) Checking compatibility with installed SimConnect: Found SimConnect build 60905 (Original) Found SimConnect build 61259 (Acc/SP2 Oct07) Checking if there's already a version of FSUIPC4 installed in: J:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL ... Version 4.530 found. FSX Modules folder already exists. Okay -- installed FSUIPC4 into "J:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL" Looking for the current user's Application Data path: ... found as "J:\Documents and Settings\Administrator\Application Data" Now finding \Microsoft\FSX\FSX.CFG for all users, including this one Looking in "J:\Documents and Settings\Administrator\Application Data" Found FSX.CFG in "J:\Documents and Settings\Administrator\Application Data\Microsoft\FSX\FSX.CFG" Now checking DLL.XML ... ... There is a previous DLL.XML, checking for FSUIPC4 section. ... FSUIPC4 section already exists but will be replaced. ... FSUIPC4 section of DLL.XML written okay Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Looking in "J:\Documents and Settings\All Users\Application Data" No FSX.CFG there Looking in "J:\Documents and Settings\Default User\Application Data" No FSX.CFG there Looking in "J:\Documents and Settings\LocalService\Application Data" No FSX.CFG there Looking in "J:\Documents and Settings\NetworkService\Application Data" No FSX.CFG there Now installing additional files into the Modules folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "List of FSX controls.pdf" okay Installed "GlobalSign Root.exe" okay Installed "FSUIPC Lua Library.pdf" okay Installed "FSUIPC Lua Plug-Ins.pdf" okay Installed "Lua License.pdf" okay Installed "Example LUA plugins.zip" okay FSUIPC4.DLL signature failed: trying GlobalSign Root fix ... Problem! My signature check fails on the installed FSUIPC4.DLL. (Error ref 80092026) Deleted GlobalSign Root fix programno longer relevant =========================================================== All installer tasks completed okay! Registration check for FSUIPC4 was successful! (result code 00) *************** End of Install Log *************** Link to comment Share on other sites More sharing options...
Pete Dowson Posted November 3, 2009 Report Share Posted November 3, 2009 NOTE: Installed Win7 on new drive and new install of all programs and everything is FINE So, I don't need to look at this install log? Is that from when you had a problem? It says the signature check failed. Regards Pete Link to comment Share on other sites More sharing options...
B42L8 Posted November 3, 2009 Report Share Posted November 3, 2009 Still need answers...........I downloaded the FSUIPC 4.546 zipped file, into W7 ..Computer-7©-Download Library-X Modules.........I then extracted the file to computer-7©-Program "Files (x86)-Microsoft Games-Microsoft Flight Simulator X-Modules............now there is a FSUIPC4 DLL File 8/27/2009 9:05 PM v4.5.3.0........not the 4.546?? Please let me know where I made an errror in the install............Many Thanks for this support!! B42L8 Link to comment Share on other sites More sharing options...
Pete Dowson Posted November 3, 2009 Report Share Posted November 3, 2009 Still need answers...........I downloaded the FSUIPC 4.546 zipped file, into W7 ..Computer-7©-Download Library-X Modules.........I then extracted the file to computer-7©-Program "Files (x86)-Microsoft Games-Microsoft Flight Simulator X-Modules............now there is a FSUIPC4 DLL File 8/27/2009 9:05 PM v4.5.3.0........not the 4.546?? Please let me know where I made an errror in the install There's no error in the Install of 4.53, evidently. If you copied the later FSUIPC4.DLL file into the correct place, it surely must be there. But Win7 should have prompted you, asking whether to replace the older one (which of course you should have allowed). If it didn't I expect it changed the name, putting the word "copy" or something in there. (You cannot have two files with identical names in the same folder). Have a look in the folder with Windows Explorer. I'm sure you will see what's wrong! You have to REPLACE the file if you want to update. Having a renamed copy won't work because it then looks like something different. Files are known by their names.. If you cannot manage files with Explorer it might be better to stay with 4.53 until I release 4.55 in due course -- certainly before Christmas. That will have an installer as all the main FSUIPC4 user releases do. Oh, by the way, 4.546 is no longer available for download. 4.547 replaced it. Regards Pete Link to comment Share on other sites More sharing options...
B42L8 Posted November 3, 2009 Report Share Posted November 3, 2009 Again, thanks for the super service!!!............I think I see what happened and will work on it, but so far the controls are A-OK sp I am good for the moment...............(hope my experience will help others as well) B42L8 Link to comment Share on other sites More sharing options...
B42L8 Posted November 3, 2009 Report Share Posted November 3, 2009 Got it done!!.............I just moved the unzipped file over to FSX Modules and did the copy, and now it is there..............thanks for your much appreciated help!! B42L8 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now