Jump to content
The simFlight Network Forums

Problems with Concorde X throttles


Recommended Posts

I am using the registered version 4.57, and a CH Yoke, pedals and quadrant.-

In FSX, I disabled controls and let FSUIPC manage them.- I am using profiles and the "ShortAircraftNameOk=Substring" entry in the .ini.- I created diferent profiles for jets and prop aircraft.-

I have a profile for multiengine jets which I use with B747, B727 and B737 without any problems.-

I purchased the Concorde X from FSLabs, and within the FSUIPC box, set its axes to the mentioned profile.-

As I had problems of stucking throttle levers after some time flying, I deleted manually the Concorde reference of the profile, and created one specific to it.-

As the problems continued, I deleted that profile and tried again; strangely, with the Concorde loaded, within the FSUIPC axis assigning box, the profile square was already checked, preventing to create a new profile, which It shouldnt be as all the references to the Concorde were deleted from the .ini, and no other aircraft name in any of the existent profiles has any resemblance.- I checked then the .ini and a new entry appeared: "[Profile.]1=".- I think the levers problems are due to the Concorde X, but I am curious to know what that empty profile is for, and why I cannot create a new replacing profile.-

Thanks

Jorge

Link to comment
Share on other sites

I am using the registered version 4.57

That's a bit out of date, and not supported. 4.60 is current, with a later update in the Updates Announcenemt in this forum.

I deleted that profile and tried again; strangely, with the Concorde loaded, within the FSUIPC axis assigning box, the profile square was already checked, preventing to create a new profile, which It shouldnt be as all the references to the Concorde were deleted from the .ini, and no other aircraft name in any of the existent profiles has any resemblance.- I checked then the .ini and a new entry appeared: "[Profile.]1=

Strange. After updating to 4.60 or later, can you show me an FSUIPC4 log, please, with the Concorde being loaded/used, and your INI file. You can paste them into a message here. Just select them after pasting and use the "code" button to encapsulate them for scrolling and selection.

Regards

Pete

Link to comment
Share on other sites

I am using the registered version 4.57

That's a bit out of date, and not supported. 4.60 is current, with a later update in the Updates Announcenemt in this forum.

Strange. After updating to 4.60 or later, can you show me an FSUIPC4 log, please, with the Concorde being loaded/used, and your INI file. You can paste them into a message here. Just select them after pasting and use the "code" button to encapsulate them for scrolling and selection.

Regards

Pete

Thanks Pete

I update to version 4,60, and could create a new profile for the Concorde.

In order to not loose all my aircrafts settings, I left a pre Concorde .ini which I saved as backup.-

At the first flight, after sometime, the throttle levers stucked, at the second flight all went OK.-

Here it is my log:

  ********* FSUIPC4, Version 4.60a by Pete Dowson *********
Reading options from "E:\FS10\Modules\FSUIPC4.ini"
Trying to connect to SimConnect Acc/SP2 Oct07 ...
User Name="jorge soldano"
User Addr="soldano@sinectis.com.ar"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
Running inside FSX on Windows 7 (using SimConnect Acc/SP2 Oct07)
Module base=61000000
Wind smoothing fix is fully installed
DebugStatus=15
      171 System time = 11/04/2010 18:27:41
      171 FLT UNC path = "\\JORGE-PC\Users\Jorge\Documents\Flight Simulator X Files\"
      171 FS UNC path = "E:\FS10\"
      655 LogOptions=00000000 00000001
      655 SimConnect_Open succeeded: waiting to check version okay
     4992 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0)
     4992 Initialising SimConnect data requests now
     4992 FSUIPC Menu entry added
     5007 \\JORGE-PC\Users\jorge\documents\flight simulator x files\Aeroparque B737 500.FLT
     5007 E:\FS10\SimObjects\Airplanes\feelThere pic 737-500\B737-5A00A.AIR
     7035 Aircraft="FeelThere Boeing 737-500 ARSA  Full"
     7051 System time = 11/04/2010 18:27:48, Simulator time = 14:30:30 (17:30Z)
   273735 Advanced Weather Interface Enabled
   308180 Sim stopped: average frame rate for last 36 secs = 19.9 fps
   311580 E:\FS10\SimObjects\Airplanes\FSLabs_BAe-Concorde\Concorde.AIR
   311580 Weather Mode now = Custom
   311596 \\JORGE-PC\Users\jorge\documents\flight simulator x files\Aeroparque Concorde.FLT
   312438 Aircraft="Concorde (Capt) BAUF OAF"
  1369595 Sim stopped: average frame rate for last 1022 secs = 18.3 fps
  1433898 Sim stopped: average frame rate for last 60 secs = 24.3 fps
  1511930 Sim stopped: average frame rate for last 76 secs = 11.8 fps
  2320499 Sim stopped: average frame rate for last 806 secs = 10.8 fps
  2398359 Sim stopped: average frame rate for last 74 secs = 22.8 fps
  2454223 Sim stopped: average frame rate for last 39 secs = 25.9 fps
  2693622 System time = 11/04/2010 19:12:34, Simulator time = 15:00:15 (18:00Z)
  2693622 *** FSUIPC log file being closed
Average frame rate for running time of 2120 secs = 15.7 fps
Memory managed: 916 Allocs, 915 Freed
********* FSUIPC Log file closed ***********

And here is my .ini:

[General]
UpdatedByVersion=4600
History=JM8TPMWZH4463XWAA4XI0
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=15
FixControlAccel=No
FixMachSpeedBug=No
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=Yes
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
Console=No
PollGFTQ6=Yes
BlankDisplays=No

[JoyNames]
AutoAssignLetters=No
0=CH PRO PEDALS USB                                                                                                                          






1=CH THROTTLE QUADRANT
2=CH FLIGHT SIM YOKE USB                                                                                                                     






0.GUID={62B09D30-F16B-11DE-8003-444553540000}
1.GUID={62B09D30-F16B-11DE-8004-444553540000}
2.GUID={62B09D30-F16B-11DE-8005-444553540000}

[WideServer]
WideFSenabled=Yes

[Buttons]
ButtonRepeat=20,10
1=P1,0,K54,8
2=P1,1,K55,8
3=P1,4,K52,9
4=P1,5,K90,8
5=P1,7,K191,9
6=P1,8,K82,9
7=P1,9,K90,8
8=P1,10,K117,8
9=P1,11,K118,8
10=P2,4,K121,8
11=P2,5,K120,8
12=P2,7,K122,8
13=R2,10,K36,8
14=R2,11,K35,8
15=R2,8,K13,9
16=R2,9,K8,9
17=P2,1,K190,10
18=R2,3,K135,10
19=R2,2,K45,10

[AutoSave]
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No
Port=COM0
Speed=4800
Interval=2000
PosTo6Decimal=No
Sentences=

[GPSout2]
GPSoutEnabled=No
Port=
Speed=4800
Interval=2000
PosTo6Decimal=No
Sentences=

[Axes]
0=0X,256,D,7,40,0,0
1=0Y,256,D,8,0,0,0
2=0Z,256,D,3,40,0,0
3=2X,256,D,1,38,0,0
4=2Y,256,D,2,39,0,0
5=2Z,256,D,4,0,0,0
6=2U,256,D,6,0,0,0
7=2V,256,D,5,0,0,0
8=2P,0,F,66416,0,0,0

[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16253,-520,-520,15744
Elevator=-15213,-1430,-1430,16128
Rudder=-16384,0,0,16256
Throttle=-16384,16383
PropPitch=-16384,16383
Mixture=-16253,16383
LeftBrake=-16384,15616/16
RightBrake=-16253,16383/16
Reverser1=-16384,14848
Reverser2=-16384,14848
Reverser3=-16384,14208
Reverser4=-16384,14208
Spoilers=-16380,16380/16
SyncSlopeThrottle2=26/26
SyncSlopeThrottle3=26/26
PropPitch1=-16384,-16384,0,14720
PropPitch2=-16384,-16384,512,16383
Throttle1=-16384,-512,512,14208/32
Throttle2=-16384,-512,512,15360/32
Throttle3=-16384,-512,512,14720/32
Throttle4=-16384,-512,512,16383/32

[Profile.Jets]
1=PMDG 
2=FeelThere Boeing 
3=Learjet 45
4=Level D Simulations B767-300ER
5=Commercial Level
6=Boeing 737-800
7=Boeing 747-400
8=Bombardier CRJ 700
9=CS 727-200
10=CS 727-100
11=Captain Sim 757-200
11=CS 767-300
12=Boeing 777-223ER
13=CS 767-300
14=CS 767 Captain AWACS

[Axes.Jets]
0=0X,256,D,7,0,0,0
1=0Y,256,D,8,0,0,0
2=0Z,256,D,3,40,0,0
3=1X,256,D,9,0,0,0
4=1Y,256,D,10,0,0,0
5=1Z,256,D,11,0,0,0
6=1R,256,D,43,44,0,0
7=1U,256,D,12,0,0,0
8=1V,256,D,41,42,0,0
9=2X,256,D,1,38,0,0
10=2Y,256,D,2,39,0,0
11=2U,256,D,22,0,0,0
12=2P,0,F,66416,0,0,0

[Profile.Prop Twin]
1=FSD Panther 
2=RealAir Beech Duke 
3=Beech Baron 
4=PA-34 SENECA II
5=FSD Navajo Flair
6=Douglas DC-3
7=RealAir Beech Duke 

[Axes.Prop Twin]
0=0X,256,D,7,40,0,0
1=0Y,256,D,8,0,0,0
2=0Z,256,D,3,40,0,0
3=1X,256,D,9,0,0,0
4=1Y,256,D,10,0,0,0
5=1Z,256,D,17,0,0,0
6=1R,256,D,14,0,0,0
7=1U,256,D,18,0,0,0
8=1V,256,D,13,0,0,0
9=2X,256,D,1,38,0,0
10=2Y,256,D,2,39,0,0
11=2Z,256,D,4,0,0,0
12=2U,256,D,6,0,0,0
13=2V,256,D,5,0,0,0
14=2P,0,F,66416,0,0,0

[Profile.Turboprop BAE]
1=PMDG J-41


[Axes.Turboprop BAE]
0=0X,256,D,7,40,0,0
1=0Y,256,D,8,0,0,0
2=0Z,256,D,3,40,0,0
3=1X,256,D,9,0,0,0
4=1Y,256,D,10,0,0,0
5=1R,256,D,18,0,0,0
6=1V,256,D,17,0,0,0
7=2X,256,D,1,38,0,0
8=2Y,256,D,2,39,0,0
9=2Z,256,D,4,0,0,0
10=2U,256,D,6,0,0,0
11=2V,256,D,5,0,0,0
12=2P,0,F,66416,0,0,0

[JoystickCalibration.Turboprop BAE]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16253,-520,-520,15744
Elevator=-15213,-1430,-1430,16128
Rudder=-16384,0,0,16256
Throttle=-16384,16383
PropPitch=-16384,16383
Mixture=-16253,16383
LeftBrake=-16384,15616/16
RightBrake=-16253,16383/16
Throttle1=-16384,-11963,512,14208
Throttle2=-16384,-8582,512,15232
Throttle3=-16384,-512,512,14720
Throttle4=-16384,-512,512,16383
PropPitch1=-16384,-16384,512,14848
PropPitch2=-16384,-16384,512,14208
Spoilers=-16380,16380/16
Reverser1=-16384,14848
Reverser2=-16384,14848
Reverser3=-16384,14208
Reverser4=-16384,14208



[Profile.Turboprop Cheyenne]
1=Piper PA31T 
2=Piper PA31T1
3=Piper PA31T2


[Axes.Turboprop Cheyenne]
0=0X,256,D,7,40,0,0
1=0Y,256,D,8,0,0,0
2=0Z,256,D,3,40,0,0
3=1X,256,D,9,0,0,0
4=1Y,256,D,10,0,0,0
5=1Z,256,D,17,0,0,0
6=1R,256,D,14,0,0,0
7=1U,256,D,18,0,0,0
8=1V,256,D,13,0,0,0
9=2X,256,D,1,38,0,0
10=2Y,256,D,2,39,0,0
11=2Z,256,D,4,0,0,0
12=2U,256,D,6,0,0,0
13=2V,256,D,5,0,0,0
14=2P,0,F,66416,0,0,0

[JoystickCalibration.Turboprop Cheyenne]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16253,-520,-520,15744
Elevator=-15213,-1430,-1430,16128
Rudder=-16384,0,0,16256
Throttle=-16384,16383
PropPitch=-16384,16383
Mixture=-16253,16383
LeftBrake=-16384,15616/16
RightBrake=-16253,16383/16
Throttle1=-16384,-11703,-512,14208
Throttle2=-16384,-11312,-512,15232
Throttle3=-16384,-512,512,14720
Throttle4=-16384,-512,512,16383
Mixture1=-16384,8192,8192,14976/32
Mixture2=-16384,8192,8192,14208/32
PropPitch1=-14693,-11703,0,14720
PropPitch2=-16384,-16123,0,16383
Spoilers=-16380,16380/16
Reverser1=-16384,14848
Reverser2=-16384,14848
Reverser3=-16384,14208
Reverser4=-16384,14208

[MacroFiles]
1=747 OHD
2=APchart

[JoystickCalibration.Jets]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=No
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16253,-520,-520,15744
Elevator=-15213,-1430,-1430,16128
Rudder=-16384,0,0,16256
Throttle=-16384,16383
PropPitch=-16384,16383
Mixture=-16253,16383
LeftBrake=-16384,15616/16
RightBrake=-16253,16383/16
Throttle1=-16384,-512,512,14208/32
Throttle2=-16384,-512,512,15360/32
SyncSlopeThrottle2=26/26
Throttle3=-16384,-512,512,14720/32
SyncSlopeThrottle3=26/26
Throttle4=-16384,-512,512,16383/32
SyncSlopeThrottle4=26/26
PropPitch1=-16384,-16384,0,14720
PropPitch2=-16384,-16384,512,16383
Spoilers=-16380,16380/16
Reverser1=-16384,14848
Reverser2=-16384,14848
Reverser3=-16384,14208
Reverser4=-16384,14208

[Profile.Concorde]
1=Concorde (Capt) BAUF OAF

[Axes.Concorde]
0=0X,256,D,7,40,0,0
1=0Y,256,D,8,0,0,0
2=0Z,256,D,3,40,0,0
3=1X,256,D,9,0,0,0
4=1Y,256,D,10,0,0,0
5=1Z,256,D,11,0,0,0
6=1U,256,D,12,0,0,0
7=2X,256,D,1,38,0,0
8=2Y,256,D,2,39,0,0
9=2Z,256,D,4,0,0,0
10=2U,256,D,6,0,0,0
11=2V,256,D,5,0,0,0
12=2P,0,F,66416,0,0,0

[JoystickCalibration.Concorde]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16384,-1040,-1040,15744
Elevator=-15083,-910,-910,16256
Rudder=-16384,0,0,16256
SlopeRudder=9
Throttle=-16384,16383
PropPitch=-16384,16383
Mixture=-16253,16383
LeftBrake=-16384,15616/16
RightBrake=-16253,16383/16
Throttle1=-16384,-512,512,14208/32
Throttle2=-16384,-512,512,15360/32
SyncSlopeThrottle2=26/26
Throttle3=-16384,-512,512,14720/32
SyncSlopeThrottle3=26/26
Throttle4=-16384,-512,512,16383/32
PropPitch1=-16384,-16384,0,14720
PropPitch2=-16384,-16384,512,16383
Spoilers=-16380,16380/16
Reverser1=-16384,14848
Reverser2=-16384,14848
Reverser3=-16384,14208
Reverser4=-16384,14208

Link to comment
Share on other sites

I update to version 4,60, and could create a new profile for the Concorde.

In order to not loose all my aircrafts settings, I left a pre Concorde .ini which I saved as backup.-

At the first flight, after sometime, the throttle levers stucked, at the second flight all went OK.-

Here it is my log:

The log and the INI file you show here have no sign of any odd Profile behaviour, so did all that disappear? You said

I checked then the .ini and a new entry appeared: "[Profile.]1=".- I think the levers problems are due to the Concorde X, but I am curious to know what that empty profile is for, and why I cannot create a new replacing profile.-

so I was really looking for this odd line.

Could it be that somehow that file became corrupted before the problem occurred? Obviously something more than the Profile name is missing as there should never be that "1=" immediately after the "]", and a null name may well match any aircraft. I can improve the code to detect the omission of the name and delete or ignore that line, and I will do so, but first I'd like to find out how it arose.

If you think you could reproduce it, please do, after making a safe copy of your INI. Please write down step-by-step how to do it so I can try here. If I can reproduce it I can fix it.

The entry in your current INI, as shown here, looks fine:

[Profile.Concorde]
1=Concorde (Capt) BAUF OAF

Regards

Pete

Link to comment
Share on other sites

Pete

As I said in my post, before updating to 4.6, I replaced my problematic ini with an older one I had saved as backup, and was the one I sent you.-

Fortunately I saved that problematic ini.- In this case, it happened that with Concorde loaded, and trying to assign axis, I found the profile box was already chequed, so I couldnt creat a new profile.- But when trying to calibrate, the profile box was unchecked, so it let me to create the Concorde Profile within the calibrating page.-

Here is that .ini:

[General]
UpdatedByVersion=4530
History=V72J3HIN7Q6IE76KKE7S8
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=15
FixControlAccel=No
FixMachSpeedBug=No
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=Yes
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
Console=No

[JoyNames]
AutoAssignLetters=No
0=CH PRO PEDALS USB                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
1=CH THROTTLE QUADRANT
2=CH FLIGHT SIM YOKE USB                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

[WideServer]
WideFSenabled=Yes

[Buttons]
ButtonRepeat=20,10
1=P1,0,K54,8
2=P1,1,K55,8
3=P1,4,K52,9
4=P1,5,K90,8
5=P1,7,K191,9
6=P1,8,K82,9
7=P1,9,K90,8
8=P1,10,K117,8
9=P1,11,K118,8
10=P2,4,K121,8
11=P2,5,K120,8
12=P2,7,K122,8
13=R2,10,K36,8
14=R2,11,K35,8
15=R2,8,K13,9
16=R2,9,K8,9
17=P2,1,K190,10
18=R2,3,K135,10
19=R2,2,K45,10

[AutoSave]
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No
Port=COM0
Speed=4800
Interval=2000
PosTo6Decimal=No
Sentences=

[GPSout2]
GPSoutEnabled=No
Port=
Speed=4800
Interval=2000
PosTo6Decimal=No
Sentences=

[Axes]
0=0X,256,D,7,40,0,0
1=0Y,256,D,8,0,0,0
2=0Z,256,D,3,40,0,0
3=2X,256,D,1,38,0,0
4=2Y,256,D,2,39,0,0
5=2Z,256,D,4,0,0,0
6=2U,256,D,6,0,0,0
7=2V,256,D,5,0,0,0
8=2P,0,F,66416,0,0,0

[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=No
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16253,-520,-520,15744
Elevator=-15213,-1430,-1430,16128
Rudder=-16384,0,0,16256
Throttle=-16384,16383
PropPitch=-16384,16383
Mixture=-16253,16383
LeftBrake=-16384,15616/16
RightBrake=-16253,16383/16
Reverser1=0,14848
Reverser2=-16384,14848
Reverser3=0,14208
Reverser4=-16384,14208
Spoilers=-16380,16380/16
SyncSlopeThrottle2=26/26
SyncSlopeThrottle3=26/26
PropPitch1=-16384,-16384,0,14720
PropPitch2=-16384,-16384,512,16383
Throttle1=-15083,-512,512,14080/32
Throttle2=-14043,-512,512,15232/32
Throttle3=-14433,-512,512,14720/32
Throttle4=-16253,-512,512,16383/32
Mixture1=-16384,8192,8192,14976/32
Mixture2=-16384,8192,8192,14208/32

[Profile.Jets]
1=PMDG - 747-400
2=FeelThere Boeing 
3=Learjet 45
4=Level D Simulations B767-300ER
5=Commercial Level
6=Boeing 737-800
7=Boeing 747-400
8=Bombardier CRJ 700
9=CS 727-200
10=CS 727-100
11=Captain Sim 757-200
11=CS 767-300
12=Boeing 777-223ER
13=CS 767-300
14=CS 767 Captain AWACS


[Axes.Jets]
0=0X,256,D,7,0,0,0
1=0Y,256,D,8,0,0,0
2=0Z,256,D,3,40,0,0
3=1X,256,D,9,0,0,0
4=1Y,256,D,10,0,0,0
5=1Z,256,D,11,0,0,0
6=1R,256,D,43,44,0,0
7=1U,256,D,12,0,0,0
8=1V,256,D,41,42,0,0
9=2X,256,D,1,38,0,0
10=2Y,256,D,2,39,0,0
11=2U,256,D,22,0,0,0
12=2P,0,F,66416,0,0,0

[Profile.Prop Twin]
1=FSD Panther 
2=RealAir Beech Duke 
3=Beech Baron 
4=PA-34 SENECA II
5=FSD Navajo Flair
6=Douglas DC-3
7=RealAir Beech Duke 

[Axes.Prop Twin]
0=0X,256,D,7,40,0,0
1=0Y,256,D,8,0,0,0
2=0Z,256,D,3,40,0,0
3=1X,256,D,9,0,0,0
4=1Y,256,D,10,0,0,0
5=1Z,256,D,17,0,0,0
6=1R,256,D,14,0,0,0
7=1U,256,D,18,0,0,0
8=1V,256,D,13,0,0,0
9=2X,256,D,1,38,0,0
10=2Y,256,D,2,39,0,0
11=2Z,256,D,4,0,0,0
12=2U,256,D,13,0,0,0
13=2V,256,D,5,0,0,0
14=2P,0,F,66416,0,0,0


[Profile.Turboprop BAE]
1=PMDG J-41


[Axes.Turboprop BAE]
0=0X,256,D,7,40,0,0
1=0Y,256,D,8,0,0,0
2=0Z,256,D,3,40,0,0
3=1X,256,D,9,0,0,0
4=1Y,256,D,10,0,0,0
5=1R,256,D,18,0,0,0
6=1V,256,D,17,0,0,0
7=2X,256,D,1,38,0,0
8=2Y,256,D,2,39,0,0
9=2Z,256,D,4,0,0,0
10=2U,256,D,6,0,0,0
11=2V,256,D,5,0,0,0
12=2P,0,F,66416,0,0,0

[JoystickCalibration.Turboprop BAE]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16253,-520,-520,15744
Elevator=-15213,-1430,-1430,16128
Rudder=-16384,0,0,16256
Throttle=-16384,16383
PropPitch=-16384,16383
Mixture=-16253,16383
LeftBrake=-16384,15616/16
RightBrake=-16253,16383/16
Throttle1=-16384,-11963,512,14208
Throttle2=-16384,-8582,512,15232
Throttle3=-16384,-512,512,14720
Throttle4=-16384,-512,512,16383
PropPitch1=-16384,-16384,512,14848
PropPitch2=-16384,-16384,512,14208
Spoilers=-16380,16380/16
Reverser1=-16384,14848
Reverser2=-16384,14848
Reverser3=-16384,14208
Reverser4=-16384,14208



[Profile.Turboprop Cheyenne]
1=Piper PA31T 
2=Piper PA31T1
3=Piper PA31T2


[Axes.Turboprop Cheyenne]
0=0X,256,D,7,40,0,0
1=0Y,256,D,8,0,0,0
2=0Z,256,D,3,40,0,0
3=1X,256,D,9,0,0,0
4=1Y,256,D,10,0,0,0
5=1Z,256,D,17,0,0,0
6=1R,256,D,14,0,0,0
7=1U,256,D,18,0,0,0
8=1V,256,D,13,0,0,0
9=2X,256,D,1,38,0,0
10=2Y,256,D,2,39,0,0
11=2Z,256,D,4,0,0,0
12=2U,256,D,6,0,0,0
13=2V,256,D,5,0,0,0
14=2P,0,F,66416,0,0,0

[JoystickCalibration.Turboprop Cheyenne]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16253,-520,-520,15744
Elevator=-15213,-1430,-1430,16128
Rudder=-16384,0,0,16256
Throttle=-16384,16383
PropPitch=-16384,16383
Mixture=-16253,16383
LeftBrake=-16384,15616/16
RightBrake=-16253,16383/16
Throttle1=-16384,-11703,-512,14208
Throttle2=-16384,-11312,-512,15232
Throttle3=-16384,-512,512,14720
Throttle4=-16384,-512,512,16383
Mixture1=-16384,8192,8192,14976/32
Mixture2=-16384,8192,8192,14208/32
PropPitch1=-14693,-11703,0,14720
PropPitch2=-16384,-16123,0,16383
Spoilers=-16380,16380/16
Reverser1=-16384,14848
Reverser2=-16384,14848
Reverser3=-16384,14208
Reverser4=-16384,14208

[Axes.]
0=0X,256,D,7,40,0,0
1=0Y,256,D,8,0,0,0
2=0Z,256,D,3,40,0,0
3=1X,256,D,9,0,0,0
4=1Y,256,D,10,0,0,0
5=1Z,256,D,11,0,0,0
6=1R,256,D,43,44,0,0
7=1U,256,D,12,0,0,0
8=1V,256,D,41,42,0,0
9=2X,256,D,1,38,0,0
10=2Y,256,D,2,39,0,0
11=2Z,256,D,4,0,0,0
12=2U,256,D,6,0,0,0
13=2V,256,D,5,0,0,0
14=2P,0,F,66416,0,0,0



[Profile.]
1=

[Profile.Concorde]
1=Concorde 

[JoystickCalibration.Concorde]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=No
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16253,-650,-650,15872
SlopeAileron=8
Elevator=-15213,-1430,-1430,16128
Rudder=-16384,-260,-260,16128
SlopeRudder=10
Throttle=-16384,16383
PropPitch=-16384,16383
Mixture=-16253,16383
LeftBrake=-16384,15616/16
RightBrake=-16253,16383/16
Throttle1=-15083,-512,512,14080/32
Throttle2=-14043,-512,512,15232/32
Throttle3=-14433,-512,512,14720/32
Throttle4=-16253,-512,512,16383/32
Mixture1=-16384,8192,8192,14976/32
Mixture2=-16384,8192,8192,14208/32
PropPitch1=-16384,-16384,0,14720
PropPitch2=-16384,-16384,512,16383
Spoilers=-16380,16380/16
Reverser1=0,14848
Reverser2=-16384,14848
Reverser3=0,14208
Reverser4=-16384,14208

Thanks

Link to comment
Share on other sites

Fortunately I saved that problematic ini.- In this case, it happened that with Concorde loaded, and trying to assign axis, I found the profile box was already chequed, so I couldnt creat a new profile.- But when trying to calibrate, the profile box was unchecked, so it let me to create the Concorde Profile within the calibrating page.-

Here is that .ini:

Okay. In fact the line wasn't as you quoted, the one I couldn't unsderstand. The wrong lines are:

[Axes.]

[Profile.]
1=

To me it looks exactly as if you deleted just the "Concorde" name before you retried, instead of the complete section, thus leaving those partial lines. I cannot think of any other possible explanation! The reason it was okay in the Calibration tab (and would have been in the Keys and Buttons tabs) is that you only had Axes defined before.

Anyway, in the next release I shall ignore or even delete such entries, even though I don't think they'll ever happen naturally.

Regards

Pete

Link to comment
Share on other sites

Fortunately I saved that problematic ini.- In this case, it happened that with Concorde loaded, and trying to assign axis, I found the profile box was already chequed, so I couldnt creat a new profile.- But when trying to calibrate, the profile box was unchecked, so it let me to create the Concorde Profile within the calibrating page.-

Here is that .ini:

Okay. In fact the line wasn't as you quoted, the one I couldn't unsderstand. The wrong lines are:

[Axes.]

[Profile.]
1=

To me it looks exactly as if you deleted just the "Concorde" name before you retried, instead of the complete section, thus leaving those partial lines. I cannot think of any other possible explanation! The reason it was okay in the Calibration tab (and would have been in the Keys and Buttons tabs) is that you only had Axes defined before.

Anyway, in the next release I shall ignore or even delete such entries, even though I don't think they'll ever happen naturally.

Regards

Pete

Pete

I didnt partially delete accidentally that entry.-

The total sequence is:

Included Concorde in my jets profile

As there were problems with the throttles I deleted the entry

Created a specific Concorde profile

As again had problems I deleted it

Tried again, but this time I couldnt because in the axis page I found the profile box was already chequed.-

I looked at the ini and noticed that the entry "[Profile.]1=" appeared

I deleted that false entry

Tried again a couple of times and the same happened, each time I loaded the Concorde and got in the axis assigning page, the false entry appeared in the ini.-

Strange, isnt it ?

Link to comment
Share on other sites

The total sequence is:

I know. You are repeating yourself. :?

As there were problems with the throttles I deleted the entry

Created a specific Concorde profile

As again had problems I deleted it

I think one of those two times you edited the file made a mistake deleting -- or you deleted whilst FS was still running, which could possibly cause problems too.

Tried again, but this time I couldnt because in the axis page I found the profile box was already chequed.-

I looked at the ini and noticed that the entry "[Profile.]1=" appeared

There again you appear to be quoting that incorrectly, which led me completely astray in the first place. In the file it is not

[Profile.]1=

but

[Profile.]

1=

precisely as if it would otherwise have been

[Profile.Concorde]

1=Concorde

before you deleted the Concorde parts.

Strange, isnt it ?

Not with my explanation, no, not really. If you really still think there's a bug and you can reproduce it, please give exact steps -- keystroke by keystroke -- and without things like presenting "[Profile.]1=" when the "1=" is a new line. If it is possible to derive such a strange result without user error I'll need to reproduce it to fix it.

Regards

Pete

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.