ulisses Posted August 23, 2003 Report Share Posted August 23, 2003 Hi, I installed FSUIPC 305 and WideFS 610, I got many pauses in project magenta displays. I reverted the WideFS to 602 and still with the pauses and stutters, so I reverted the FSUIPC to 304 and it is a lot better, like before. Not sure if the problem is the FSUIPC, but when I installed the 304 no more pauses. I'm still testing, now I'll update WideFS again to 610 and see what heppens. Thanks, ulisses simionato Link to comment Share on other sites More sharing options...
Pete Dowson Posted August 23, 2003 Report Share Posted August 23, 2003 I installed FSUIPC 305 and WideFS 610, I got many pauses in project magenta displays. I reverted the WideFS to 602 and still with the pauses and stutters, so I reverted the FSUIPC to 304 and it is a lot better, like before. Not sure if the problem is the FSUIPC, but when I installed the 304 no more pauses. There really is no difference FSUIPC could make that I know of, and the difference in WideServer 6.02 to 6.10 is only evident when and if you ever got lots of restarts logged in the Server Log file -- they just shouldn't occur any more. If you turn off all the new visibility options in FSUIPC 3.05 then there is no difference in what FSUIPC is doing either. They are actually off by default of course. Every time I make a release of new versions, I get many messages like this. And really they cannot be due to the changes I've made, so it is extremely odd. Yet it happens every time. :? I try to keep the actual number of changes down, to keep things predictable and understandable, and in the developments from 3.00 to 3.05 this has most certainly been the case. The most significant change has been the visibility things in 3.05, and apart from those there is nothing of significance to normal running performance. And WideFS has not changed significantly since before version 5.50. Strange. Pete Link to comment Share on other sites More sharing options...
ulisses Posted August 23, 2003 Author Report Share Posted August 23, 2003 hi Pete, Strange...I'll try to update everything again. In project magenta forum another user reported the same pauses after the update. Anything that I can change in FSUIPC settings to work like 304 ? I know, I know....but it is just a test, trying to find the problem. Thanks, ulisses Link to comment Share on other sites More sharing options...
Pete Dowson Posted August 23, 2003 Report Share Posted August 23, 2003 Anything that I can change in FSUIPC settings to work like 304 ? Yes: don't use visibility smoothing, visibility maxima or graduated visibilty. And enable the option in the Technical page to change FS's own weather, so mucking up the selection of "weather themes". The only other changes are to support a few extra values in the IPC interface, and some additional facilities for those programs, like FSMeteo 6, which use the NWI. That's it. You can check the list of changes in the History document. Really, if there's some minute timing change somewhere in FSUIPC which has an effect on stutters and pauses in Project Magenta on client computers, and I cannot imagine what that could be, your system must have been on a knife edge, ready to fail in such a manner in any case. Are the WideFS logs reporting problems? Are the frame rates poor (use "F" in PM's PFD) -- the data update rates should in general, match FS's own frame rates? Is the frame rate limiter set 'wisely' in FS? What exactly are these symptoms of stutters and pausing? I find it very difficult to imagine anything I've done for many months having any affect on this in the first place. It just doesn't make any sense. Pete Link to comment Share on other sites More sharing options...
Pete Dowson Posted August 23, 2003 Report Share Posted August 23, 2003 Ulisses, If the displays which are "jerky" are the engine read-outs in the EICAS, not the PFD or ND displays, then I can probably offer some adjustable parameters to make those scan, in FSUIPC, faster or slower. Generally they do take a lower priority. It's a performance thing -- a lot of the engine values have to be derived by my code on every frame. for some of them, to avoid the overheads, I don't do it on every frame, but only perhpas 3 or 4 or 5 times a second. This is in order to provide maximum fluidity to the important stuff like the attitude indications - pitch, bank, heading -- airspeed, vertical speed, altitude, and so on. Check things out, see what it is you are really seeing, check the WideFS logs, and so on. Then write to me on petedowson@btconnect .com -- not before Monday, please, and maybe I'll get you a Beta to try with some parameters to set scan rates. Regards, Pete Link to comment Share on other sites More sharing options...
ulisses Posted August 23, 2003 Author Report Share Posted August 23, 2003 Hi Pete, I re-installed FSUIPC and WideFS in all machines, booted everything and now it looks good, but I did a short flight, so I'll fly more tomorrow and if i still have problems I send you an e-mail. Here are some logs that looks good (I think): ********* WideServer.DLL Log [version 6.10] ********* Using blocksize guide of 4096 bytes Date (dmy): 23/08/03, Time 20:10:20.483: Server name is FS 54359 Initialising server socket now 98078 Restarting service due to total lack of use 139625 Incoming connection Accepted ok (skt=5004) 140031 Connected to computer "PFD" (skt=5004) 142515 Incoming connection Accepted ok (skt=5024) 143062 Connected to computer "EICAS" (skt=5024) 1141672 Shutdown request received! 1143469 Client socket disconnected at Client: removing (skt=5024) 1143750 Client socket disconnected at Client: removing (skt=5004) 1161015 Closing down now ... Memory managed: Offset records: 269 alloc, 269 free Throughput maximum achieved: 84 frames/sec, 18883 bytes/sec Throughput average achieved for complete session: 29 frames/sec, 5249 bytes/sec ********* Log file closed ********* ********* WideClient.DLL Log [version 6.10] Class=FS98MAIN ********* Date (dmy): 23/08/03, Time 21:27:02.247: Client name is PFD 320 Attempting to connect now 360 Connection made okay! 3905 New Client Application: "mcp747" (Id=1852) 8392 New Client Application: "pfd" (Id=1836) 11076 New Client Application: "MCP" (Id=1820) 1002361 Shutdown request received! 1004544 Reception maximum achieved: 42 frames/sec, 10201 bytes/sec 1004544 Reception average achieved whilst connected: 33 frames/sec, 2191 bytes/sec 1004544 Max receive buffer = 594, Max send depth = 2 1004544 ********* Log file closed (Buffers: MaxUsed 3, Alloc 126289 Freed 126289 Refused 0) ********* Thanks so much for your support ! ulisses Link to comment Share on other sites More sharing options...
Pete Dowson Posted August 24, 2003 Report Share Posted August 24, 2003 Here are some logs that looks good (I think): Throughput maximum achieved: 84 frames/sec, 18883 bytes/sec Throughput average achieved for complete session: 29 frames/sec, 5249 bytes/sec Reception maximum achieved: 42 frames/sec, 10201 bytes/sec Reception average achieved whilst connected: 33 frames/sec, 2191 bytes/sec Wow! How do you get such fantastic performance? What processor/video are you using on the FS PC? I'm lucky to get 20 fps (average much less) on my P4 2.4GHz! Time I upgraded again I think! Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now