Jump to content
The simFlight Network Forums

Buttons/Keys Profile vs. General


Recommended Posts

In FSUIPC4.ini, there are sections in which general key/button assignments are stored and then also per profile (aircraft).

As in every setup, people have general assignments that are the same for every aircraft, and then those specific ones, only for that aircraft.

As I understood it, it works separately in FSUIPC too, you can assign them separately.

Yet on each flight reload, those two sections are recreated, according to the general assignments, in the specific profile of the aircraft.

Let's take an example.

These are my general assignments:

[Axes]

0=0X,256,D,45,0,0,0

1=0Y,256,D,46,0,0,0

2=0R,256,D,47,36,0,0

3=3X,256,D,7,0,0,0

4=3Y,256,D,8,0,0,0

5=3R,256,D,3,0,0,0

[buttons]

ButtonRepeat=20,10

1=R0,2,C65607,0

2=R0,3,C65615,0

4=R0,1,C1001,0

5=U0,1,C1002,0

6=R0,0,C65588,0

7=R0,6,C65624,0

8=R0,7,C65620,0

9=U0,7,C65622,0

10=U0,6,C65622,0

[Keys]

22=N79,8,66700,0

23=73,8,66699,0

25=N32,8,1127,0,1128,0

My aircraft profile is this:

[Profile.Cessna 172]

1=Cessna Skyhawk 172SP Paint1

2=Cessna Skyhawk 172SP

3=C172N Skyhawk II BLUE

4=Cessna Skyhawk 172SP G1000

[Axes.Cessna 172]

0=0X,256,D,45,0,0,0

1=0Y,256,D,46,0,0,0

2=0R,256,D,47,36,0,0

3=1X,256,D,22,0,0,0

4=1Y,256,D,4,0,0,0

5=1Z,256,D,6,0,0,0

6=2Z,256,D,23,0,0,0

7=3X,256,D,7,0,0,0

8=3Y,256,D,8,0,0,0

9=3R,256,D,3,0,0,0

It's including axes, because over all my aircraft, throttle axes get customized, and you can only have the profile loaded, I made my axes manually by copying each section appropriately.

Back to buttons...

And if I start a flight, without entering FSUIPC or anything, this is what I get:

[Profile.Cessna 172]

1=Cessna Skyhawk 172SP Paint1

2=Cessna Skyhawk 172SP

3=C172N Skyhawk II BLUE

4=Cessna Skyhawk 172SP G1000

[Axes.Cessna 172]

0=0X,256,D,45,0,0,0

1=0Y,256,D,46,0,0,0

2=0R,256,D,47,36,0,0

3=1X,256,D,22,0,0,0

4=1Y,256,D,4,0,0,0

5=1Z,256,D,6,0,0,0

6=2Z,256,D,23,0,0,0

7=3X,256,D,7,0,0,0

8=3Y,256,D,8,0,0,0

9=3R,256,D,3,0,0,0

[buttons.Cessna 172]

1=R0,2,C65607,0

2=R0,3,C65615,0

4=R0,1,C1001,0

5=U0,1,C1002,0

6=R0,0,C65588,0

7=R0,6,C65624,0

8=R0,7,C65620,0

9=U0,7,C65622,0

10=U0,6,C65622,0

[Keys.Cessna 172]

22=N79,8,66700,0

23=73,8,66699,0

25=N32,8,1127,0,1128,0

I don't want these assignments double. The reason:

If I would decide at some later point to change the function to another button, and would do it in general, it wouldn't change in the profiles, but remain the old one. Right? I would have to change it for each aircraft separately, or go through fsuipc4.ini and delete all those buttons/keys sections, risking maybe deleting some custom made configurations for that aircraft.

Is this in any way doable or am I doing something wrong?

Link to comment
Share on other sites

Yet on each flight reload, those two sections are recreated, according to the general assignments, in the specific profile of the aircraft.

This was a problem introduced in a release a few months ago (not sure which one), and fixed recently. Can you please re-check with the latest version (4.81 or 3.999f). Let me know. I'm pretty sure it is fixed, but it isn't easy to test all configurations.

Regards

Pete

Link to comment
Share on other sites

4.81, the issue is not an issue any more as it seems! Happy camper.

Btw. it takes hours to configure even a small setup. I hope once it's done, I can save my files somewhere in a vault or something in case my computer dies, because doing this again... ugh.

Link to comment
Share on other sites

Btw. it takes hours to configure even a small setup. I hope once it's done, I can save my files somewhere in a vault or something in case my computer dies, because doing this again... ugh.

I backup all my work on a separate PC. And every now and then, usually before going away for a weekend or on holiday, i write it to DVDs and store them safely in an outbuilding (in case my house falls down or something!).

A lot of folks sem to be using on-line storage these days. The magazines have even been comparing the different services available. But with many gigabytes it is not only more expensive, but VERY slow with UK upload speeds. Download's not a lot better, yet.

If you only mean FSUIPC configuration, just back up the INI file and any macros and Lua files you've created.

Regards

Pete

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.