Jump to content
The simFlight Network Forums

problem with fsuipc.ini


Recommended Posts

hi

first of all i want to say that i enjoy very much to work with fsuipc it is a great tool!.

and now my problem

i have two bux cards.

i created mocros for some toggles for pmdg 737-800 ngx and all of them work fine except one

when i try to record my operate for this toggle i get this message :" this has mixed actions already pleas edit it in fsuipc.ini"

i have fsuipc4 so i checked fsuipc4.ini, i deleted all the previous assignments and i dont find any problem with my ini file

i attach the ini file and i wonder to get any help

thanks

Menachem

Link to comment
Share on other sites

i created mocros for some toggles for pmdg 737-800 ngx and all of them work fine except one

when i try to record my operate for this toggle i get this message :" this has mixed actions already pleas edit it in fsuipc.ini"

i have fsuipc4 so i checked fsuipc4.ini, i deleted all the previous assignments and i dont find any problem with my ini file

The notice you get doesn't mean there's an error, only that the button has two or more assignments. That's allowed. You can have as many as you want. But then they have to be edited directly, in the INI file, because with the options dialogue you wn't be able to control which you change.

i attach the ini file and i wonder to get any help

There was no attachment, but no worries. Just paste it into a reply here.

Regards

Pete

Link to comment
Share on other sites

this toggle isn't assigned so i don't understand this message.

It would have been useful for you to state which button/toggle it is you have the problem with. I can't immediately see a problem with the INI, but not knowing even which device or buttonmakes it harder.

Based on what he decides that the toggle has been assigned ?

Ah, sorry, I miread the error message. The one i referred to is "this has multiple actions ...". "Mixed actions" is a different problem. It means that on "Press" you have assigned to a Keypress and on "Release" to a control. or vice versa. This is okay, it will work, but you can't then edit it in the dialogue because that has one or the other for both press and release. you see?

[LATER]

Aha! Looking again through your INI, the button responsible for this is:

128=P3,26,K0,8

129=U3,26,C65546,0

which is rather odd as "K0,8" is a NULL keypress. Try deleting line 128.

Regards

Pete

Link to comment
Share on other sites

  • 4 weeks later...

Hi Pete,

Thanks for a great software, I have the same "This has mixed actions already! Please edit in ini file." message.

This is for the F1 Cessna T182T buttons 10 & 11 Elevator trim.

Thanks!

[General]

UpdatedByVersion=4853

History=CQ1D4W0A18S1ARMAFHBWA

InitDelayDevicesToo=No

MouseWheelMove=No

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=No

FixMachSpeedBug=No

DeleteVehiclesForAES=Yes

AutoScanDevices=Yes

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=No

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=No

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=No

UseProfiles=Yes

EnableMouseLook=No

AxesWrongRange=No

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

InitDelay=0

GetNearestAirports=Yes

OOMcheck=Yes

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

LuaRerunDelay=66

Console=No

FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0

SimConnectUsed=10.0.61259.0

[JoyNames]

AutoAssignLetters=No

1=CH PRO PEDALS USB

1.GUID={2B8B6BD0-3C6F-11E2-8004-444553540000}

0=CH FLIGHT SIM YOKE USB

0.GUID={3E858630-3D8C-11E2-8002-444553540000}

[buttons]

Buttonrepeat=20,10

1=P0,8,C65827,0

2=P0,7,K49,9

[AutoSave]

Next=1

Interval=60

Files=10

SaveOnGround=No

AutoSaveEnabled=No

[GPSout]

GPSoutEnabled=No

Port=COM0

Speed=4800

Interval=2000

PosTo6Decimal=No

SimModeIndicator=No

Sentences=

[GPSout2]

GPSoutEnabled=No

Port=<none set>

Speed=4800

Interval=2000

PosTo6Decimal=No

SimModeIndicator=No

Sentences=

[WideServer]

WideFSenabled=Yes

AdvertiseService=1

Port=8002

Port2=9002

[sounds]

Path=E:\FSX\Sound\

Device1=Primary Sound Driver

Device2=Speakers (Realtek High Definition Audio)

Device3=Realtek Digital Output(Optical) (Realtek High Definition Audio)

Device4=Realtek Digital Output (Realtek High Definition Audio)

[Profile.Cessna 172N]

1=C172 Anniversary

2=C172N Skyhawk II BLUE

[buttons.Cessna 172N]

0=P0,5,C65758,0

1=P0,4,C65759,0

2=P0,0,C65564,0

3=R0,11,C65615,0

4=R0,10,C65607,0

5=P0,7,C65752,0

6=P0,8,K83,8

7=P0,9,K65,8

[Axes.Cessna 172N]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,4,0,0,0

3=0U,256,D,6,0,0,0

4=1X,256,D,7,0,0,0

5=1Y,256,D,8,0,0,0

6=1Z,256,D,3,0,0,0

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16123,-1690,128,12544

Elevator=-14173,640,1792,16128

Rudder=-12873,1920,1920,14592

Throttle=-16384,16383

Mixture=-16384,16383

LeftBrake=-10880,10402/16

RightBrake=-11776,10012/16

[Profile.CT182T]

1=CT182T Skylane 4

[Axes.CT182T]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,4,0,0,0

3=0U,256,D,6,0,0,0

4=0V,256,D,5,0,0,0

5=1X,256,D,7,0,0,0

6=1Y,256,D,8,0,0,0

7=1Z,256,D,3,0,0,0

[buttons.CT182T]

0=P0,8,K83,8

1=P0,0,C65564,0

2=R0,10,C65607,0

3=U0,10,K0,8

4=R0,11,C65615,0

5=U0,11,K0,8

6=R0,5,C65758,0

7=R0,4,C65759,0

8=R0,2,C66278,0

9=R0,3,C66279,0

10=P0,9,C66153,0

11=P0,7,K49,9

12=P0,6,K50,9

13=P0,1,C65752,0

[ClientNames]

1=MARIO-PC

[JoystickCalibration.CT182T]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16123,-1690,128,12544

Elevator=-14173,640,1792,16128

Rudder=-13523,1792,1792,13440

Throttle=-16384,16383

Mixture=-16384,16383

LeftBrake=-9344,9362/16

RightBrake=-9344,9882/16

[Profile.C172SP Used Trainer]

1=Cessna Skyhawk 172SP Paint4

[buttons.C172SP Used Trainer]

0=P0,5,C65758,0

1=P0,4,C65759,0

2=P0,0,C65564,0

3=R0,11,C65615,0

4=R0,10,C65607,0

5=P0,7,C65752,0

6=P0,8,K83,8

7=P0,9,K65,8

8=U0,10,C65683,0

[Axes.C172SP Used Trainer]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,4,0,0,0

3=0U,256,D,6,0,0,0

4=1X,256,D,7,0,0,0

5=1Y,256,D,8,0,0,0

6=1Z,256,D,3,0,0,0

[Profile.F1 Cessna T182T]

1=F1_Cessna_T182T3

[buttons.F1 Cessna T182T]

0=P0,8,K83,8

1=P0,0,C65564,0

2=R0,10,C65607,0

3=U0,10,K0,8

4=R0,11,C65615,0

5=U0,11,K0,8

6=R0,5,C65758,0

7=R0,4,C65759,0

8=R0,2,C66278,0

9=R0,3,C66279,0

10=P0,9,K65,8

11=P0,7,K49,9

12=P0,6,K50,9

13=P0,1,C65752,0

[Axes.F1 Cessna T182T]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,4,0,0,0

3=0U,256,D,6,0,0,0

4=0V,256,D,5,0,0,0

5=1X,256,D,7,0,0,0

6=1Y,256,D,8,0,0,0

7=1Z,256,D,3,0,0,0

[JoystickCalibration.F1 Cessna T182T]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-14823,-650,-650,14464

Elevator=-13783,-780,1280,15616

Rudder=-14043,1536,1792,13824

Throttle=-16123,16128

Mixture=-16384,15872

LeftBrake=-9344,9362/16

RightBrake=-9344,9882/16

PropPitch=-15473,16128

Link to comment
Share on other sites

Thanks for a great software, I have the same "This has mixed actions already! Please edit in ini file." message.

This is for the F1 Cessna T182T buttons 10 & 11 Elevator trim.

Yes, it has. That is exactly right. What is the question please?

If you don't see the mised actions, look here:

[buttons.CT182T]

0=P0,8,K83,8

1=P0,0,C65564,0

2=R0,10,C65607,0

3=U0,10,K0,8

4=R0,11,C65615,0

5=U0,11,K0,8

6=R0,5,C65758,0

7=R0,4,C65759,0

8=R0,2,C66278,0

9=R0,3,C66279,0

10=P0,9,C66153,0

11=P0,7,K49,9

12=P0,6,K50,9

13=P0,1,C65752,0

See? Control for Press, Keypress for Release. Definitely mixed! It is perfectly legitimate, but it makes use of the dialogue impossible, you must edit the lines in the INI instead.

Pete

Link to comment
Share on other sites

Thank you both kindly, for looking at my file.

Peter, my question was what do I need to correct in the .ini file to correct this mixed action message. I think you both provided the answer.

Just installed this F1 T182T G1000 and had some serious freezing issues when compared to the Carenado T182T G1000. I suspected a conflict with my settings/controls.

FSUIPC has been flawless, thus I never looked in the .ini file.

I will make the changes as per Andydigital.

Merci!

Link to comment
Share on other sites

Ok, I read these posts. I tried my best at it but I cannot see what the problem is, mainly because Im not used to looking at the button codes. So I have the same message and I understand that in the dialog I assigned a push on a button and a key press for a release. It worked great when I needed it but I have been after it for a month trying to get it.

The Button is Button 08 (x52) Saitek.

I thought I had the line where this was taking place, and deleted it to no avail. LOL

help?

Here is my .ini file as well thanks a lot guys.

!1=1[General]

UpdatedByVersion=4703

History=LL7CF6Z507OEK1WKPRL6Z

MouseWheelTrim=Yes

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=No

FixMachSpeedBug=No

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=Yes

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=5

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=Yes

WindSmoothness=2

WindSmoothAirborneOnly=No

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=Yes

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=15

RudderSpikeRemoval=Yes

ElevatorSpikeRemoval=Yes

AileronSpikeRemoval=Yes

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=Yes

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=No

UseProfiles=No

TCASid=Type

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

GetNearestAirports=No

WeatherReadFactor=30

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

LuaRerunDelay=66

Console=No

[JoyNames]

AutoAssignLetters=No

0=Saitek X52 Flight Controller

0.GUID={169927E0-5B42-11E0-8005-444553540000}

[buttons]

Buttonrepeat=20,10

18=P0,4,C65570,0

54=P0,2,C65759,0

55=P0,3,C65758,0

66=P0,0,C66653,0

67=P0,14,C66654,0

69=R0,5,C66854,0

70=U0,5,C66653,0

81=U0,8,C65752,0

85=P0,1,C65580,0

86=U0,1,C65793,0

93=P0,12,C65774,0

94=P0,13,C65778,0

100=P0,26,C66530,0

101=R0,15,Cx42000BC0,xC0010040

102=R0,17,Cx32000BC0,x3FFF0040

103=R0,21,K187,8

104=P0,20,K65,8

105=R0,19,K189,8

106=P0,22,K83,9

107=P0,18,C66288,0

108=P0,16,C66289,0

111=P0,28,K49,8

112=P0,27,K55,8

[AutoSave]

AutoSaveEnabled=No

[GPSout]

GPSoutEnabled=No

Port=COM1

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[GPSout2]

GPSoutEnabled=No

Port=<none set>

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[WideServer]

WideFSenabled=Yes

[sounds]

Path=C:\Flight Simulator X\Sound\

Device1=Primary Sound Driver

Device2=Speakers (2- C-Media USB Headphone Set )

Device3=Digital Audio (S/PDIF) (High Definition Audio Device)

Device4=Digital Audio (S/PDIF) (High Definition Audio Device)

[Keys]

2=82,8,66512,0

15=40,8,66525,0

17=38,8,66524,0

19=32,8,66530,0

20=118,8,66379,0,66239,0

21=39,8,66526,0

22=37,8,66527,0

24=186,8,66525,0

26=33,8,66524,0

27=115,8,65910,0

[Axes]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,4,0,0,0

3=0R,256,D,3,0,0,0

4=0U,256

5=0U,BR,-16384,-5934,x42000BC0,xC0010020

6=0U,BR,4644,16383,x31000BC0,x3FFF0020

7=0V,256

8=0V,B,14448,16383,65752,0

9=0V,B,-16384,-14061,66066,0,66065,0

10=0S,256,D,8,7,0,0

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16287,-401,464,16383/8

Elevator=-16383,-255,256,16383/8

Rudder=-15228,-223,289,16383/8

Throttle=-16384,16383

LeftBrake=-16383,16380/24

RightBrake=-16380,16380/24

ElevatorTrim=-16380,-5031,2193,16380/24

Spoilers=-16383,16383/8

PanHeading=-16383,-902,387,16383/8

PanPitch=-16384,-903,645,16383/24

SlopeRudder=15

[window.Radar Contact]

Docked=12790, 445, 3536, 2449

Undocked=0, 0, 8, 8

[Keys.Raytheon Premier1 N3216P]

2=112,8,65907,0,1126,0

6=115,8,65910,0,1126,0

7=114,8,65909,0,1126,0

14=113,8,65908,0,1126,0

22=120,8,66657,0

23=38,8,66528,0

24=40,8,66529,0

25=37,8,66527,0

26=39,8,66526,0

27=186,8,66525,0

28=33,8,66524,0

34=119,8,65560,0

35=117,8,66239,0,66379,0

38=118,8,66240,0,66378,0

39=116,8,66389,0

[buttons.Raytheon Premier1 N3216P]

13=P0,0,C66653,0

14=P0,14,C66654,0

26=U0,28,C66524,0

[General]

UpdatedByVersion=4703

History=LL5AI703Y8KEJTSINPJ42

MouseWheelTrim=Yes

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=No

FixMachSpeedBug=No

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=Yes

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=5

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=Yes

WindSmoothness=2

WindSmoothAirborneOnly=No

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=Yes

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=15

RudderSpikeRemoval=Yes

ElevatorSpikeRemoval=Yes

AileronSpikeRemoval=Yes

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=Yes

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=No

UseProfiles=No

TCASid=Type

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

GetNearestAirports=No

WeatherReadFactor=30

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

LuaRerunDelay=66

Console=No

[Axes.Raytheon Premier1 N3216P]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,4,0,0,0

3=0R,256,D,3,0,0,0

4=0V,256

5=0V,B,-516,16383,66064,0,66065,0

6=0V,B,-16384,-11352,65752,0,65752,0

7=0S,256,D,7,8,0,0

[Axes.T210 CENTURION BLUE CLASSIC]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,4,0,0,0

3=0R,256,D,3,0,0,0

4=0U,256,D,5,0,0,0

5=0V,256

6=0V,B,14448,16383,65752,0

7=0V,B,-16384,-14061,66066,0,66065,0

8=0S,256,D,8,7,0,0

[JoystickCalibration.T210 CENTURION BLUE CLASSIC]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16383,-401,464,16383/8

Elevator=-16383,-255,256,16383/8

Rudder=-15228,-223,289,16383/8

SlopeRudder=15

Throttle=-16384,16383

LeftBrake=-16383,16380/24

RightBrake=-16380,16380/24

ElevatorTrim=-16380,-5031,2193,16380/24

Spoilers=-16383,16383/8

PanHeading=-16383,-902,387,16383/8

PanPitch=-16384,-903,645,16383/24

PropPitch=-16380,16380/16

SlopeElevator=14

[Keys.T210 CENTURION BLUE CLASSIC]

1=116,8,66374,0,1126,0

[buttons.T210 CENTURION BLUE CLASSIC]

0=R0,15,Cx42000BC0,xC0010020

1=R0,17,Cx32000BC0,x3FFF0020

2=P0,8,C65751,0

3=P0,9,C66240,0

4=P0,10,C66379,0

5=P0,11,C66239,0

6=P0,12,C65560,0

7=P0,13,C66579,0

Link to comment
Share on other sites

EUREKA!! I found it!!!

You may not find it here because the line containing the problem was delted.

The reason I thought I still had it was because I merely reloaded the aircraft. Instead of re running FSUIPC.ini which you have to completely log out of FSUIPC.

It dawned on me that I needed reload FSX AND FSUIPC to see the effects of the delted line take place. Sure enough that was the cure.

I now have a clear button again! Thanks guys. Time for me to hit the rack LOL!!!

Link to comment
Share on other sites

Here is my .ini file as well thanks a lot guys.

You appear to have a lot of redundant stuff there. Please delete all the lines from the first one

!1=1[General]

to

Console=No

inclusive, so that the first line is now

[JoyNames]

All that stuff is being ignored in any case, but it will remain confusing should you ever need to adjust something there.

Then, please update your FSUIPC. You are still using 4.703 which has not been supported now for a long long time! The earliest supported version is 4.853, and even that is soon to be replaced.

The reason I thought I still had it was because I merely reloaded the aircraft. Instead of re running FSUIPC.ini which you have to completely log out of FSUIPC.

No, you only need to press the "Reload" button in the Buttons tab. There are reload buttons for all assignment and calibration tabs so you can play with the INI file and test things out. You don't need to keep reloading FS.

Pete

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.