Jump to content
The simFlight Network Forums

Condition and throttle lever interference


Recommended Posts

Hello Pete,

am a bit lost. I try to get my levers set for the capt sim C-130, however when I move in the cockpit itself my throttle 4 lever, the condition lever of engine nr 2 moves as well resulting in an engine shut down.

I have attached the relevant parts of the ini file.

Could you please help me?

Thanks very much and not to forget Season's greetings

Hanss

[General]

UpdatedByVersion=4853

History=JVMI637V6FY4AZAD0B4PI

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

Console=No

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=No

FixMachSpeedBug=No

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=No

SuppressCloudTurbulence=No

MaxIce=3

MinIce=-1

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=No

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=Yes

ZeroElevForAPAlt=No

ThrottleSyncAll=Yes

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=Yes

LoadPlanMenu=No

PauseAfterCrash=Yes

BrakeReleaseThreshold=75

SaveDataWithFlights=Yes

ZapSound=firework

ShortAircraftNameOk=Substring

UseProfiles=Yes

EnableMouseLook=No

AxesWrongRange=No

InitDelay=0

GetNearestAirports=Yes

LuaRerunDelay=66

MouseWheelMove=No

DeleteVehiclesForAES=Yes

AutoScanDevices=Yes

InitDelayDevicesToo=No

OOMcheck=Yes

FSVersionUsed="Microsoft Flight Simulator X",10.0.61472.0

SimConnectUsed=10.0.61259.0

[JoyNames]

AutoAssignLetters=No

0=Saitek Pro Flight Quadrant

0.GUID={AE9C1310-DEC2-11DF-8001-444553540000}

1=Saitek Pro Flight Yoke

1.GUID={2C1833B0-D5FD-11DF-8001-444553540000}

2=Saitek Pro Flight Rudder Pedals

2.GUID={245B0AC0-D5FE-11DF-8001-444553540000}

3=Saitek Pro Flight Quadrant

3.GUID={F8383B30-EDC1-11DF-8001-444553540000}

[WideServer]

WideFSenabled=Yes

[buttons]

1=R1,38,C66416,270

10=P1,18,C66079,0

11=P1,19,C66080,0

12=R3,0,C1061,0

14=R3,4,C1063,0

15=R0,0,C1064,0

17=P1,16,C65752,0

24=R1,17,C65564,0

27=R1,34,C66416,90

28=R1,35,C66416,135

30=R1,37,C66416,225

31=R1,39,C66416,315

32=P3,2,C1062,0

34=P1,0,C65791,0

36=R1,32,C66416,0

37=R1,33,C66416,45

38=R1,36,C66416,180

Buttonrepeat=20,10

[AutoSave]

AutoSaveEnabled=No

Next=1

Interval=60

Files=10

SaveOnGround=Yes

[GPSout]

GPSoutEnabled=No

Port=COM1

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[GPSout2]

GPSoutEnabled=No

Port=<none set>

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

MaxThrottleForReverser=256

SteeringTillerControl=0

SyncSlopePropPitch2=29/26

FlapDetents=No

ReverserControl=66292

[Profile.4 engine turbo prop]

1=CS C133Extra2 0

2=P-3C Orion Royal Netherland Navy

3=VickersViscount_800_KLM

[Axes.4 engine turbo prop]

0=0X,256,D,12,0,0,0

1=0Y,256,D,13,0,0,0

2=0Z,256,D,14,0,0,0

3=1X,256,F,65695,0,0,0

4=1Y,256,F,65694,0,0,0

5=1Z,256,D,15,0,0,0

6=1U,256,D,16,0,0,0

7=1V,256,F,65921,0,0,0

8=1P,0,F,66416,0,0,0

9=2X,256,D,7,0,0,0

10=2Y,256,D,8,0,0,0

11=2R,256,F,65696,0,0,0

12=3X,1,D,9,0,0,0

13=3Y,256,D,10,0,0,0

14=3Z,256,D,11,0,0,0

[JoystickCalibration.4 engine turbo prop]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,-512,512,16380

Elevator=-16380,-512,512,16380

Rudder=-16380,-512,512,16380

SlopeRudder=15

PropPitch=0,0

LeftBrake=-16380,16380/16

RightBrake=-16380,16380/16

ReverserControl=66292

Throttle1=-16380,-512,0,16380

Throttle2=-16380,-512,0,16380

Throttle3=-16380,-512,0,16380

Throttle4=-16380,-512,0,16380

Mixture1=-16384,-512,512,16383/24

Mixture2=-16384,-512,512,16383/24

Mixture3=-16384,-512,512,16383/24

Mixture4=-16384,-512,512,16383/24

SyncSlopeMixture2=127/128

SyncSlopeMixture3=127/128

SyncSlopeMixture4=127/128

[buttons.4 engine turbo prop]

0=P1,2,C65607,0

1=P1,3,C65615,0

2=P1,4,C65758,0

3=P1,5,C65759,0

4=P1,6,C66278,0

5=P1,7,C66279,0

6=P3,0,C1061,0

7=P3,2,C1062,0

8=P3,4,C1063,0

9=P0,0,C1064,0

10=P1,18,C66079,0

11=P1,19,C66080,0

12=P1,16,C65752,0

13=P1,17,C65589,0

14=P1,0,C65791,0

15=P1,1,C65606,0

Link to comment
Share on other sites

... when I move in the cockpit itself my throttle 4 lever, the condition lever of engine nr 2 moves as well resulting in an engine shut down.

You have multiple assignments to that lever then, for sure. The only assignments you are showing in the INI file fragment are these:

[Axes.4 engine turbo prop]

0=0X,256,D,12,0,0,0

1=0Y,256,D,13,0,0,0

2=0Z,256,D,14,0,0,0

3=1X,256,F,65695,0,0,0

4=1Y,256,F,65694,0,0,0

5=1Z,256,D,15,0,0,0

6=1U,256,D,16,0,0,0

7=1V,256,F,65921,0,0,0

8=1P,0,F,66416,0,0,0

9=2X,256,D,7,0,0,0

10=2Y,256,D,8,0,0,0

11=2R,256,F,65696,0,0,0

12=3X,1,D,9,0,0,0

13=3Y,256,D,10,0,0,0

14=3Z,256,D,11,0,0,0

and they are all unique, so I conclude that you have controlers enabled in FS, and some (this one at leastr) also assigned in FS.

Regards

Pete

Link to comment
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.