John Fee Posted September 8, 2014 Report Posted September 8, 2014 I run FS9 in W7x64. I have button 2 on CH Eclipse mapped to Views/cycle using FSUIPC v.3.999z9a. In cockpit view when I click this button (taking me into Virtual Cockpit or Spot views) the Collins AP Power switches off. As can be seen, the Collins, unusually for most FS9 autopilots, has separate Power ON/OFF switches and AP engage/disengage switches. I am not sure how to separate commands for View/Cycle and Power ON/OFF with this particular autopilot using FSUIPC and would be grateful for advice. BTW, I cannot Power ON the Collins again until I return to Cockpit View. Thanking you. John
Pete Dowson Posted September 9, 2014 Report Posted September 9, 2014 I run FS9 in W7x64. I have button 2 on CH Eclipse mapped to Views/cycle using FSUIPC v.3.999z9a. In cockpit view when I click this button (taking me into Virtual Cockpit or Spot views) the Collins AP Power switches off. I wouldn't have thought they used the same FS control to operate AP power. That would be rather daft -- it would happen using the normal keyboard actions in FS too. Have you checked? My betting is that you have more than one assignment to that button, maybe in FS as well as FSUIPC. Use the Event logging in FSUIPC's logging tab to see what controls are being sent when you press the button. Pete
John Fee Posted September 9, 2014 Author Report Posted September 9, 2014 I wouldn't have thought they used the same FS control to operate AP power. That would be rather daft -- it would happen using the normal keyboard actions in FS too. Have you checked? My betting is that you have more than one assignment to that button, maybe in FS as well as FSUIPC. Use the Event logging in FSUIPC's logging tab to see what controls are being sent when you press the button. Pete Thank you, Pete. The same thing happens with the FS keyboard command (S). I've checked for duplicate assignments several times and could find none. I've attached a log file and would be grateful if you could take a look at it. Regards, John FSUIPC_joy2.txt
Pete Dowson Posted September 9, 2014 Report Posted September 9, 2014 The same thing happens with the FS keyboard command (S). I've checked for duplicate assignments several times and could find none. Is the aircraft one of the defaults, or an add-on? I've attached a log file and would be grateful if you could take a look at it. I'm afraid it does not contain enough information -- it looks like you did not enable the Event logging, only the Button/key logging? BTW rather than attach logs as files it is easier for both of us if you simply paste heir contents into your message. Envelop them using the <> button above the edit area. Pete
John Fee Posted September 9, 2014 Author Report Posted September 9, 2014 Events included this time, my mistake. ********* FSUIPC, Version 3.999z9a by Pete Dowson ********* Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL) User Name="John Fee" User Addr="gooneybird@yankeedodge.com" FSUIPC Key is provided WideFS Key is provided [Continuation log requested by user] Module base=61000000 WeatherReadInterval=4 LogOptions=00000001 4729358 System time = 09/09/2014 16:25:25, FS2004 time = 15:07:43 (19:07Z) 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729405 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729529 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729576 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729607 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729701 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729732 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729779 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729810 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729888 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4729935 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730013 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730091 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730138 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730185 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730216 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730263 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730341 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730372 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730419 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730543 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730575 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730621 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730668 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730746 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730777 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730824 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730855 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4730949 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731027 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731058 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731136 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731183 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731230 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731261 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731339 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731386 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731433 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731589 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731620 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731667 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731713 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731791 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731823 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731869 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731947 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4731994 Button changed: bRef=0, Joy=2, Btn=0, Pressed 4731994 [Buttons] 11=P2,0,K83,8 4731994 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 4731994 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 4731994 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0 4731994 .. Key not programmed -- passed on to FS 4731994 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 4732103 *** EVENT: Cntrl= 66104 (0x00010238), Param= 0 (0x00000000) AP_PANEL_ALTITUDE_OFF 4732103 *** EVENT: Cntrl= 65816 (0x00010118), Param= 0 (0x00000000) AP_ALT_HOLD_OFF 4732103 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF 4732103 *** EVENT: Cntrl= 65814 (0x00010116), Param= 0 (0x00000000) AP_APR_HOLD_OFF 4732103 *** EVENT: Cntrl= 65815 (0x00010117), Param= 0 (0x00000000) AP_HDG_HOLD_OFF 4732103 *** EVENT: Cntrl= 65819 (0x0001011b), Param= 0 (0x00000000) AP_NAV1_HOLD_OFF 4732103 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF 4732103 *** EVENT: Cntrl= 65791 (0x000100ff), Param= 0 (0x00000000) AUTOPILOT_OFF 4732103 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732135 SendKeyToFS(00000053=[S], KEYUP) ctr=0 4732135 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1 4732135 Button changed: bRef=0, Joy=2, Btn=0, Released 4732135 [Buttons] 11=P2,0,K83,8 4732135 KEYUP: VK=83, Waiting=0 4732181 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732213 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732306 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732337 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732384 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732415 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732540 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732587 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732618 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732696 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732743 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732790 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732821 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732868 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4732946 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733024 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733071 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733149 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733180 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733227 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733273 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733351 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733383 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733429 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733554 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733585 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733632 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733663 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733741 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733788 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733835 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733866 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733944 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4733991 Button changed: bRef=0, Joy=2, Btn=0, Pressed 4733991 [Buttons] 11=P2,0,K83,8 4733991 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 4733991 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 4733991 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0 4733991 .. Key not programmed -- passed on to FS 4733991 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 4734038 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734085 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734116 SendKeyToFS(00000053=[S], KEYUP) ctr=0 4734116 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1 4734116 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734116 KEYUP: VK=83, Waiting=0 4734194 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734241 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734241 Button changed: bRef=0, Joy=2, Btn=0, Released 4734241 [Buttons] 11=P2,0,K83,8 4734272 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734319 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734397 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734443 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734521 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734599 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734646 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734677 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734724 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734755 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734755 Button changed: bRef=0, Joy=2, Btn=0, Pressed 4734755 [Buttons] 11=P2,0,K83,8 4734755 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 4734755 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 4734755 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0 4734755 .. Key not programmed -- passed on to FS 4734755 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 4734802 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734896 SendKeyToFS(00000053=[S], KEYUP) ctr=0 4734896 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1 4734896 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4734896 KEYUP: VK=83, Waiting=0 4734927 Button changed: bRef=0, Joy=2, Btn=0, Released 4734927 [Buttons] 11=P2,0,K83,8 4734927 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4735005 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4735083 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4735130 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4735177 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4735208 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4735255 Button changed: bRef=0, Joy=2, Btn=0, Pressed 4735255 [Buttons] 11=P2,0,K83,8 4735255 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 4735255 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 4735255 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0 4735255 .. Key not programmed -- passed on to FS 4735255 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 4735364 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4735395 SendKeyToFS(00000053=[S], KEYUP) ctr=0 4735395 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1 4735395 Button changed: bRef=0, Joy=2, Btn=0, Released 4735395 [Buttons] 11=P2,0,K83,8 4735395 KEYUP: VK=83, Waiting=0 4735442 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4735520 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4735567 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4735645 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4735676 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 4735723 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
Pete Dowson Posted September 9, 2014 Report Posted September 9, 2014 Events included this time, my mistake. Well, I've no idea what aircraft you are using (you still didn't say), but look what it does with just the S key used: 4731994 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 4731994 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=14731994 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=04731994 .. Key not programmed -- passed on to FS4731994 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE4732103 *** EVENT: Cntrl= 66104 (0x00010238), Param= 0 (0x00000000) AP_PANEL_ALTITUDE_OFF4732103 *** EVENT: Cntrl= 65816 (0x00010118), Param= 0 (0x00000000) AP_ALT_HOLD_OFF4732103 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF4732103 *** EVENT: Cntrl= 65814 (0x00010116), Param= 0 (0x00000000) AP_APR_HOLD_OFF4732103 *** EVENT: Cntrl= 65815 (0x00010117), Param= 0 (0x00000000) AP_HDG_HOLD_OFF4732103 *** EVENT: Cntrl= 65819 (0x0001011b), Param= 0 (0x00000000) AP_NAV1_HOLD_OFF4732103 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF4732103 *** EVENT: Cntrl= 65791 (0x000100ff), Param= 0 (0x00000000) AUTOPILOT_OFF4732103 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF So, my question now: why are you assigning a button to the S key which, in FS, is assigned to the "view mode" control? Why not simply assign direct to the view mode control.? Pete
John Fee Posted September 9, 2014 Author Report Posted September 9, 2014 Thanks again. It's the Aeroworx King Air. I'm not sure I understand your last two sentences. I run FS9. In FS9 'S' is 'Views (cycle)'. I have used this assignment for button 2 for close on ten years without problems. I do not get an AP disconnect when I use button 2 on any other plane, be it default, Level D 767, or one of many other addons. When I open FSUIPC the number 24 is in the Btn# box. I think it ought not to be there. I cannot remove it except by un-checking the checked boxes. Then it reverts to 0. However, if I return to the opening panel to make some other adjustment, the 24 is always back. I do not know if this is relevant. Thanks for your help.
Pete Dowson Posted September 9, 2014 Report Posted September 9, 2014 I'm not sure I understand your last two sentences. I run FS9. In FS9 'S' is 'Views (cycle)'. I have used this assignment for button 2 for close on ten years without problems. I do not get an AP disconnect when I use button 2 on any other plane, be it default, Level D 767, or one of many other addons. And for 10 years you've had this assignment for this aircraft too? Is the Aerowinx King Air that old? What's changed if it is doing this now but not before? When I open FSUIPC the number 24 is in the Btn# box. I think it ought not to be there. That's the number of the button as seen by FSUIPC, the one it presumes you are assigning. Why should it not be there? Do you think your button has a different number? The one you used in the example log file you posted earlier was 0, as shown here: [Buttons] 11=P2,0,K83,8 You most certainly have 'S' assigned to button 0. I cannot remove it except by un-checking the checked boxes. Then it reverts to 0. However, if I return to the opening panel to make some other adjustment, the 24 is always back. I do not know if this is relevant. You have a button 24 which is constantly flickering on-off-on-off ... That is what is being detected. I would maybe guess that's the reason for these entries in the log, constantly telling the A/P to turn Back Course approach mode off: But really all this is irrelevant, a distraction. All I suggested was assigning your button to the FS control you want to use, NOT to the letter 'S'. Use the right-hand side of that buttons screen you showed me (... for some unknown reason?). Assigning to controls is always more efficient and more reliable. Only assign to keypresses for add-ons which really need keypresses, as your Aerowinx aircraft seems to, for that AP disconnect. Pretty much all FS actions have assignable controls. All the keypress would do (if not intercepted by an add-on) is go through the FS keyboard assignment tables to select the FS control you could have assigned to in the first place. You should also check the documentation of the Aerowinx aircraft to see what other keystrokes it assigns, and see if they are changeable. They usually are, in most decent add-ons. Pete
John Fee Posted September 9, 2014 Author Report Posted September 9, 2014 And for 10 years you've had this assignment for this aircraft too? Is the Aerowinx King Air that old? What's changed if it is doing this now but not before? No, not the Aeroworx (which for some unknown reason you call Aerowinx), but all others since the sim came out. That's the number of the button as seen by FSUIPC, the one it presumes you are assigning. Why should it not be there? Do you think your button has a different number? I thought I was using button 2, button 24 is unassigned in FSUIPC. The one you used in the example log file you posted earlier was 0, as shown here: [Buttons] 11=P2,0,K83,8 You most certainly have 'S' assigned to button 0. I see that very, very clearly. You have a button 24 which is constantly flickering on-off-on-off ... That is what is being detected. I would maybe guess that's the reason for these entries in the log, constantly telling the A/P to turn Back Course approach mode off: But really all this is irrelevant, a distraction. All I suggested was assigning your button to the FS control you want to use, NOT to the letter 'S'. Use the right-hand side of that buttons screen you showed me (... for some unknown reason?). Assigning to controls is always more efficient and more reliable. Only assign to keypresses for add-ons which really need keypresses, as your Aerowinx aircraft seems to, for that AP disconnect. Pretty much all FS actions have assignable controls. All the keypress would do (if not intercepted by an add-on) is go through the FS keyboard assignment tables to select the FS control you could have assigned to in the first place. You should also check the documentation of the Aerowinx aircraft to see what other keystrokes it assigns, and see if they are changeable. They usually are, in most decent add-ons. Pete Many thanks.
John Fee Posted September 9, 2014 Author Report Posted September 9, 2014 If you are still interested in getting this sorted out for me, this is the button and event log for button 0 assigned to View Mode via FS control on the right side of the box. This made no difference. The autopilot still powers off. There is no information on the keystrokes assigned to the Aeroworx/winx aircraft. ********* FSUIPC, Version 3.999z9a by Pete Dowson ********* Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL) User Name="John Fee" User Addr="gooneybird@yankeedodge.com" FSUIPC Key is provided WideFS Key is provided [Continuation log requested by user] Module base=61000000 WeatherReadInterval=4 LogOptions=00000001 255108 System time = 09/09/2014 21:50:29, FS2004 time = 13:31:49 (17:31Z) 255170 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255170 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255170 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255170 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256902 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256949 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257027 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257058 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257152 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257183 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257261 Button changed: bRef=0, Joy=0, Btn=0, Pressed 257261 [Buttons] 20=P0,0,K83,8 257261 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 257261 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 257261 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257261 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0 257261 .. Key not programmed -- passed on to FS 257261 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 257386 SendKeyToFS(00000053=[S], KEYUP) ctr=0 257386 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1 257386 Button changed: bRef=0, Joy=0, Btn=0, Released 257386 [Buttons] 20=P0,0,K83,8 257386 *** EVENT: Cntrl= 66104 (0x00010238), Param= 0 (0x00000000) AP_PANEL_ALTITUDE_OFF 257386 *** EVENT: Cntrl= 65816 (0x00010118), Param= 0 (0x00000000) AP_ALT_HOLD_OFF 257386 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF 257386 *** EVENT: Cntrl= 65814 (0x00010116), Param= 0 (0x00000000) AP_APR_HOLD_OFF 257386 *** EVENT: Cntrl= 65815 (0x00010117), Param= 0 (0x00000000) AP_HDG_HOLD_OFF 257386 *** EVENT: Cntrl= 65819 (0x0001011b), Param= 0 (0x00000000) AP_NAV1_HOLD_OFF 257386 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF 257386 *** EVENT: Cntrl= 65791 (0x000100ff), Param= 0 (0x00000000) AUTOPILOT_OFF 257386 *** EVENT: Cntrl= 66288 (0x000102f0), Param= 0 (0x00000000) TOGGLE_FLIGHT_DIRECTOR 257386 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257386 KEYUP: VK=83, Waiting=0 257464 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257510 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257666 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257713 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257744 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257822 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257869 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257916 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257947 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258025 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258072 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258150 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258228 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258228 Button changed: bRef=0, Joy=0, Btn=0, Pressed 258228 [Buttons] 20=P0,0,K83,8 258228 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 258228 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 258228 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0 258228 .. Key not programmed -- passed on to FS 258228 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 258290 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258290 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258322 Button changed: bRef=0, Joy=0, Btn=0, Released 258322 [Buttons] 20=P0,0,K83,8 258368 SendKeyToFS(00000053=[S], KEYUP) ctr=0 258368 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1 258368 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258368 KEYUP: VK=83, Waiting=0 258400 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258446 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258524 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258571 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258649 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258680 Button changed: bRef=0, Joy=0, Btn=0, Pressed 258680 [Buttons] 20=P0,0,K83,8 258680 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 258680 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 258680 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0 258680 .. Key not programmed -- passed on to FS 258680 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 258727 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258727 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258821 SendKeyToFS(00000053=[S], KEYUP) ctr=0 258821 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1 258821 Button changed: bRef=0, Joy=0, Btn=0, Released 258821 [Buttons] 20=P0,0,K83,8 258821 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258821 KEYUP: VK=83, Waiting=0 258852 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258899 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 258977 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 259008 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 259055 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 259180 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 259211 Button changed: bRef=0, Joy=0, Btn=0, Pressed 259211 [Buttons] 20=P0,0,K83,8 259211 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 259211 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 259211 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 259211 KEYDOWN: VK=83, Waiting=0, Repeat=N, Shifts=0 259211 .. Key not programmed -- passed on to FS 259211 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 259336 SendKeyToFS(00000053=[S], KEYUP) ctr=0 259336 Sending WM_KEYUP, Key=83 (Scan code 31), Ctr=1 259336 Button changed: bRef=0, Joy=0, Btn=0, Released 259336 [Buttons] 20=P0,0,K83,8 259336 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 259336 KEYUP: VK=83, Waiting=0 259414 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 259460 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 259507 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 259538 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 259663 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF Thanks, again, John
Pete Dowson Posted September 9, 2014 Report Posted September 9, 2014 If you are still interested in getting this sorted out for me, this is the button and event log for button 0 assigned to View Mode via FS control on the right side of the box. This made no difference. The autopilot still powers off. 257261 Button changed: bRef=0, Joy=0, Btn=0, Pressed 257261 [Buttons] 20=P0,0,K83,8 257261 SendKeyToFS(00000053=[S], KEYDOWN) ctr=0 257261 Sending WM_KEYDOWN, Key=83 (Scan code 31), Ctr=1 Two points: 1. You are now using button 0 on Joystick 0. Previously you were using button 0 on joystick 2! 2, Clearly button 0, joystick 0 is NOT assigned to a control, but to 'S' still. Look at the part of the Log above which very clearly shows this. The assignment line in the INI is 20=P0,0,K83,8 In the previous log you had: 11=P2,0,K83,8 Seems you are changing joysticks, but not the way you assign! Pete
John Fee Posted September 10, 2014 Author Report Posted September 10, 2014 Seems you are changing joysticks, but not the way you assign! Pete I cannot explain this. I do not have two joysticks, just one yoke. Anyways, this log is for joystick 0 (the yoke) and button 0. The autopilot Power still turns off when I cycle from Cockpit View to other Views using button 0. ********* FSUIPC, Version 3.999z9a by Pete Dowson ********* Running inside FS2004 (FS9.1 CONTROLS.DLL, FS9.1 WEATHER.DLL) User Name="John Fee" User Addr="gooneybird@yankeedodge.com" FSUIPC Key is provided WideFS Key is provided [Continuation log requested by user] Module base=61000000 WeatherReadInterval=4 LogOptions=00000001 171632 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 171679 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 171710 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 171804 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 171835 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 171882 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 171960 Button changed: bRef=0, Joy=0, Btn=0, Pressed 171960 [Buttons] 20=P0,0,C65567,0 171960 FS Control Sent: Ctrl=65567, Param=0 171960 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 172069 *** EVENT: Cntrl= 66104 (0x00010238), Param= 0 (0x00000000) AP_PANEL_ALTITUDE_OFF 172069 *** EVENT: Cntrl= 65816 (0x00010118), Param= 0 (0x00000000) AP_ALT_HOLD_OFF 172069 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF 172069 *** EVENT: Cntrl= 65814 (0x00010116), Param= 0 (0x00000000) AP_APR_HOLD_OFF 172069 *** EVENT: Cntrl= 65815 (0x00010117), Param= 0 (0x00000000) AP_HDG_HOLD_OFF 172069 *** EVENT: Cntrl= 65819 (0x0001011b), Param= 0 (0x00000000) AP_NAV1_HOLD_OFF 172069 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF 172069 *** EVENT: Cntrl= 65791 (0x000100ff), Param= 0 (0x00000000) AUTOPILOT_OFF 172069 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172147 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172147 Button changed: bRef=0, Joy=0, Btn=0, Released 172178 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172225 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172303 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172350 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172381 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172506 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172553 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172584 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172631 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172662 Button changed: bRef=0, Joy=0, Btn=0, Pressed 172662 [Buttons] 20=P0,0,C65567,0 172662 FS Control Sent: Ctrl=65567, Param=0 172662 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 172709 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172709 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172802 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172833 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172833 Button changed: bRef=0, Joy=0, Btn=0, Released 172880 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 172989 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173036 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173083 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173161 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173161 Button changed: bRef=0, Joy=0, Btn=0, Pressed 173161 [Buttons] 20=P0,0,C65567,0 173161 FS Control Sent: Ctrl=65567, Param=0 173161 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 173208 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173239 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173286 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173317 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173364 Button changed: bRef=0, Joy=0, Btn=0, Released 173411 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173489 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173520 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173613 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173613 Button changed: bRef=0, Joy=0, Btn=0, Pressed 173613 [Buttons] 20=P0,0,C65567,0 173613 FS Control Sent: Ctrl=65567, Param=0 173613 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 173723 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173769 Button changed: bRef=0, Joy=0, Btn=0, Released 173801 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173847 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173879 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 173972 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 174050 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 77389 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 247542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 247542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 247542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 247542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 247542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 247542 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 249680 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 249726 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 249804 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 249836 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 249882 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 249882 Button changed: bRef=0, Joy=0, Btn=0, Pressed 249882 [Buttons] 20=P0,0,C65567,0 249882 FS Control Sent: Ctrl=65567, Param=0 249882 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 249992 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 249992 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250070 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250070 Button changed: bRef=0, Joy=0, Btn=0, Released 250148 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250194 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250241 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250272 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250350 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250397 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250475 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250553 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250600 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250631 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250678 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250678 Button changed: bRef=0, Joy=0, Btn=0, Pressed 250678 [Buttons] 20=P0,0,C65567,0 250678 FS Control Sent: Ctrl=65567, Param=0 250678 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 250725 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250772 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250850 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 250850 Button changed: bRef=0, Joy=0, Btn=0, Released 250881 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251006 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251052 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251084 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251130 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251162 Button changed: bRef=0, Joy=0, Btn=0, Pressed 251162 [Buttons] 20=P0,0,C65567,0 251162 FS Control Sent: Ctrl=65567, Param=0 251162 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 251208 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251208 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251302 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251302 Button changed: bRef=0, Joy=0, Btn=0, Released 251333 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251380 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251489 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251536 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251583 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251614 Button changed: bRef=0, Joy=0, Btn=0, Pressed 251614 [Buttons] 20=P0,0,C65567,0 251614 FS Control Sent: Ctrl=65567, Param=0 251614 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 251723 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251770 Button changed: bRef=0, Joy=0, Btn=0, Released 251770 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251848 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 251879 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 252004 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 252051 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 252082 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 252129 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 252160 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 252254 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 252285 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255186 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255233 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255264 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255264 Button changed: bRef=0, Joy=0, Btn=0, Pressed 255264 [Buttons] 20=P0,0,C65567,0 255264 FS Control Sent: Ctrl=65567, Param=0 255264 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 255374 *** EVENT: Cntrl= 66104 (0x00010238), Param= 0 (0x00000000) AP_PANEL_ALTITUDE_OFF 255374 *** EVENT: Cntrl= 65816 (0x00010118), Param= 0 (0x00000000) AP_ALT_HOLD_OFF 255374 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF 255374 *** EVENT: Cntrl= 65814 (0x00010116), Param= 0 (0x00000000) AP_APR_HOLD_OFF 255374 *** EVENT: Cntrl= 65815 (0x00010117), Param= 0 (0x00000000) AP_HDG_HOLD_OFF 255374 *** EVENT: Cntrl= 65819 (0x0001011b), Param= 0 (0x00000000) AP_NAV1_HOLD_OFF 255374 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 0 (0x00000000) AP_BC_HOLD_OFF 255374 *** EVENT: Cntrl= 65791 (0x000100ff), Param= 0 (0x00000000) AUTOPILOT_OFF 255374 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255452 Button changed: bRef=0, Joy=0, Btn=0, Released 255498 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255545 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255576 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255654 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255701 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255748 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255779 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255857 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255904 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 255935 Button changed: bRef=0, Joy=0, Btn=0, Pressed 255935 [Buttons] 20=P0,0,C65567,0 255935 FS Control Sent: Ctrl=65567, Param=0 255935 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 255982 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256029 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256076 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256154 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256154 Button changed: bRef=0, Joy=0, Btn=0, Released 256185 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256232 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256263 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256356 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256388 Button changed: bRef=0, Joy=0, Btn=0, Pressed 256388 [Buttons] 20=P0,0,C65567,0 256388 FS Control Sent: Ctrl=65567, Param=0 256388 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256388 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 256481 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256559 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256559 Button changed: bRef=0, Joy=0, Btn=0, Released 256606 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256637 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256684 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256715 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256793 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256840 Button changed: bRef=0, Joy=0, Btn=0, Pressed 256840 [Buttons] 20=P0,0,C65567,0 256840 FS Control Sent: Ctrl=65567, Param=0 256840 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256840 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 256949 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256965 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 256996 Button changed: bRef=0, Joy=0, Btn=0, Released 257043 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257074 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257121 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257199 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257246 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF 257277 *** EVENT: Cntrl= 65818 (0x0001011a), Param= 1 (0x00000001) AP_BC_HOLD_OFF
Pete Dowson Posted September 10, 2014 Report Posted September 10, 2014 Anyways, this log is for joystick 0 (the yoke) and button 0. The autopilot Power still turns off when I cycle from Cockpit View to other Views using button 0. Okay. It is now assigned correctly, and it proves it isn't just the keypress. The action must be coded into the add-on aircraft. I'm afraid you will have to talk to their support, because there's no way to fix it as a user. Pete
John Fee Posted September 10, 2014 Author Report Posted September 10, 2014 Thanks for your interest and help. John
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now