Jump to content
The simFlight Network Forums

FSUIPC V4.939n not recording registration in P3D

Matthew Lee
 Share

Recommended Posts

Matthew Lee Newbie

Matthew Lee

Posted
Posted

I had FSX:SE installed for a while now, and have been using FSUIPC full reg version in it with no problems.

 

I recently installed P3D V2.5 and attempted to ran the FSUIPC installer again (NOT version n initially)

 

As expected it did not install the registration properly.

 

On the forum, I noted that another person had a similar issue and that the updated installer fixed it. However, I have downloaded the new installer and yet the problem of the registration not transferring to P3D still persists.

 

The key HAS copied to the modules directory of both programs.

 

Any help would be appreciated. Note I have tried installing with new registration and check old registration and it does not seem to work either way.

Installer for FSUIPC4.DLL version 4.939n


Looking in registry for FSX install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
     Parameter"SetupPath"
... >>>  OK! FOUND FSX!  <<< ...
     SetupPath=D:\Program Files (x86)\Steam\steamapps\common\FSX

Looking in registry for FSX-SE install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v1 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v2 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2
     Parameter"SetupPath"
... >>>  OK! FOUND Prepar3D v2!  <<< ...
     SetupPath=D:\Lockheed Martin\Prepar3D v2\
===========================================================

INSTALLATION FOR FSX:
SetupPath="D:\Program Files (x86)\Steam\steamapps\common\FSX\"
Checking version of the FSX EXE:
... Version 10.0.62613.0  (Need at least 10.0.60905.0)
Checking compatibility with installed SimConnect:
    Found SimConnect build 60905 (Original)
    Found SimConnect build 62613 (Steam)
    Found SimConnect build 61242 (SP1 May07)
    Found SimConnect build 61259 (Acc/SP2 Oct07)
NOTE: This is actually FSX-SE masquerading as FSX-MS
Checking if there's already a version of FSUIPC4 installed in:
       D:\Program Files (x86)\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL
... Version 4.939n found.
FSX-SE Modules folder already exists.
Okay -- installed FSUIPC4 into "D:\Program Files (x86)\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path: 
... found as "D:\Users\C-mattio\AppData\Roaming"
Now finding \Microsoft\FSX-SE\FSX_SE.CFG for all users, including this one
Looking in "D:\Users\C-mattio\AppData\Roaming"
 ... No FSX_SE.CFG there
Looking for the current user's Application Data path: 
... found as "D:\Users\C-mattio\AppData\Roaming"
Now finding \Microsoft\FSX-SE\FSX.CFG for all users, including this one
Looking in "D:\Users\C-mattio\AppData\Roaming"
 ... No FSX.CFG there
Looking for the current user's Application Data path: 
... found as "D:\Users\C-mattio\AppData\Roaming"
Now finding \Microsoft\FSX\FSX.CFG for all users, including this one
Looking in "D:\Users\C-mattio\AppData\Roaming"
Found FSX.CFG in "D:\Users\C-mattio\AppData\Roaming\Microsoft\FSX\FSX.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
     (for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
"Modules\FSUIPC Documents" folder already exists.
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "List of FSX and P3D controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
===========================================================

INSTALLATION FOR Prepar3D v2:
SetupPath="D:\Lockheed Martin\Prepar3D v2\"
Checking version of the Prepar3D v2 EXE:
... Version 2.5.12945.0  (Need at least 1.0.677.0)
Checking compatibility with installed SimConnect:
Checking if there's already a version of FSUIPC4 installed in:
       D:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.DLL
... Version 4.939n found.
Prepar3D v2 Modules folder already exists.
Okay -- installed FSUIPC4 into "D:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path: 
... found as "D:\Users\C-mattio\AppData\Roaming"
Now finding \Lockheed Martin\Prepar3D v2\Prepar3D.CFG for all users, including this one
Looking in "D:\Users\C-mattio\AppData\Roaming"
Found Prepar3D.CFG in "D:\Users\C-mattio\AppData\Roaming\Lockheed Martin\Prepar3D v2\Prepar3D.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
     (for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
"Modules\FSUIPC Documents" folder already exists.
Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder:
   Installed "SimConnectP3D2.dll" okay
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "List of FSX and P3D controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
===========================================================

All installer tasks completed.
Registration check for FSUIPC4 was successful! (result code 00)

*************** End of Install Log ***************


********* FSUIPC4, Version 4.939n by Pete Dowson *********
Reading options from "D:\Program Files (x86)\Steam\steamapps\common\FSX\Modules\FSUIPC4.ini"
Running inside FSX Steam Edition on Windows 7
Module base=59720000
User Name="Matthew Lee"
User Addr="c-mattio@hotmail.com"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
      141 System time = 20/05/2015 17:38:27
      141 FLT path = "D:\Users\C-mattio\Documents\Flight Simulator X Files\"
      156 Trying to connect to SimConnect Steam ...
      172 FS path = "D:\Program Files (x86)\Steam\steamapps\common\FSX\"
      359 LogOptions=F0000000 0000001F
      359 --- CONTROLS timer memory location obtained ok
      359 --- SIM1 Frictions access gained
      359 ASN active function link set
      375 --- FS Controls Table located ok
      375 --- Installed Mouse Macro hooks ok.
      375 Wind smoothing may be by ASN, not FSUIPC, if it is running
      375 Will switch smoothing action when ASN starts/stops
      375 SimConnect_Open succeeded: waiting to check version okay
      375 Trying to use SimConnect Steam
     4618 Running in "Microsoft Flight Simulator X", Version: 10.0.62613.0 (SimConnect: 10.0.62613.0)
     4618 Initialising SimConnect data requests now
     4618 FSUIPC Menu entry added
     4649 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y
     4649 D:\Users\C-mattio\Documents\Flight Simulator X Files\Default.FLT
     4649 D:\Program Files (x86)\Steam\steamapps\common\FSX\SimObjects\Airplanes\B737_800\Boeing737-800.air
     4696 Memory in use: 633Mb, Avail=3463Mb
     4790 Monitor IPC:024C (S32) = 3545616
    14836 Monitor IPC:024C (S32) = 3509176
    22699 Weather Mode now = Theme
    25007 Monitor IPC:024C (S32) = 3476996
    34991 Monitor IPC:024C (S32) = 3473032
    44211 D:\Program Files (x86)\Steam\steamapps\common\FSX\SimObjects\Airplanes\Aerosoft Airbus A319 CFM\A319.air
    45662 Monitor IPC:024C (S32) = 3217448
    46598 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    47940 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56520 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56520 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56520 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56520 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56520 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56520 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56520 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56520 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56520 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56520 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56520 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56520 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56691 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56816 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56816 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56816 Monitor IPC:024C (S32) = 2932112
    56941 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56941 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    56941 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    57019 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    57019 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    57019 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
    57112 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    57112 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    57222 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    57300 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    57300 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    57378 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    57487 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET
    57487 ***  AXIS: Cntrl= 66382 (0x0001034e), Param= -16383 (0xffffc001) AXIS_SPOILER_SET


********* FSUIPC4, Version 4.939n by Pete Dowson *********
Reading options from "D:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.AFR-FriendlyD3D.exe.ini"
Running inside Prepar3D v2 on Windows 7
... Prepar3D has been renamed as "AFR-FriendlyD3D.exe"
Module base=59720000
User Name=""
User Addr=""
FSUIPC4 not user registered
WIDEFS7 not user registered, or expired
       94 System time = 20/05/2015 17:06:35
       94 FLT path = "D:\Users\C-mattio\Documents\Prepar3D v2 Files\"
       94 Trying D:\Lockheed Martin\Prepar3D v2\Modules\SimConnectP3D2.dll
       94 Found it: trying to connect
      109 FS path = "D:\Lockheed Martin\Prepar3D v2\"
      234 LogOptions=00000000 00000001
      234 --- CONTROLS timer memory location obtained ok
      234 --- SIM1 Frictions access gained
      234 ASN active function link set
      234 --- FS Controls Table located ok
      234 --- Installed Mouse Macro hooks ok.
      234 Wind smoothing may be by ASN, not FSUIPC, if it is running
      234 Will switch smoothing action when ASN starts/stops
      234 SimConnect_Open succeeded: waiting to check version okay
      234 Trying to use SimConnect Prepar3D
    29079 Running in "Lockheed Martin® Prepar3D® v2", Version: 2.5.12945.0 (SimConnect: 2.5.0.0)
    29079 Initialising SimConnect data requests now
    29079 FSUIPC Menu entry added
    29094 D:\Users\C-mattio\Documents\Prepar3D v2 Files\Default.fxml
    29094 D:\Lockheed Martin\Prepar3D v2\SimObjects\Airplanes\beech_baron_58\Beech_Baron_58.air
    65021 D:\Lockheed Martin\Prepar3D v2\SimObjects\Airplanes\Aerosoft Airbus A319 IAE\A319IAE.air
   117952 System time = 20/05/2015 17:08:33, Simulator time = 17:07:05 (16:07Z)
   118920 Starting everything now ...
   122554 Advanced Weather Interface Enabled
   173816 Sim stopped: average frame rate for last 42 secs = 27.2 fps
   456474 Sim stopped: average frame rate for last 275 secs = 29.2 fps
   530591 Sim stopped: average frame rate for last 35 secs = 29.3 fps
   759319 Sim stopped: average frame rate for last 214 secs = 21.6 fps
   769943 System time = 20/05/2015 17:19:25, Simulator time = 17:07:24 (16:07Z)
   769943 *** FSUIPC log file being closed
Minimum frame rate was 10.0 fps, Maximum was 30.5 fps
Minimum available memory recorded was 811Mb
Average frame rate for running time of 594 secs = 25.9 fps
Memory managed: 137 Allocs, 137 Freed
********* FSUIPC Log file closed ***********

I don't know if it is relevant, but I have noticed NotePad has oddly started to crash when opening the FSUIPC log file now, although it can be opened in Word. NotePad works in every other respect, it is just these files that cause it to crash on opening. This issue started after the P3D issue and is not solely related.

Cheers,

 

Matt

Paul Henty Proficient

Paul Henty

Posted
Posted
The key HAS copied to the modules directory of both programs.
... Prepar3D has been renamed as "AFR-FriendlyD3D.exe"

In this case you should make sure you have a copy of the .KEY file in the P3D modules folder called:

 

FSUIPC4.AFR-FriendlyD3D.key

 

Paul

Matthew Lee Newbie

Matthew Lee

Posted
  • Author
Posted

Blimey! Thanks for the quick responses.

 

Paul, it didn't work initially but it appears renaming the key file "FSUIPC4.AFR-FriendlyD3D.exe.key" has worked.

 

I noticed that the .ini and .log files included .exe. in the file name. It appears to work completely fine with that addition.

 

Thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.