Musicman Posted July 21, 2015 Report Posted July 21, 2015 A couple of days ago My wide server stopped delivering and produced this log entries ********* WideClient Log [version 6.998b] Class=FS98MAIN *********Date (dmy): 21/07/15, Time 16:32:39.828: Client name is THEPAIN 452 LUA: "C:\Aplicats\WideFS\Initial.LUA": not found 468 Attempting to connect now 468 Trying to locate server: Need details from Server Broadcast 468 Failed to connect: waiting to try again 2480 Attempting to connect now 4524 Server = THEBITCH 4586 Trying TCP/IP host "THEBITCH" port 8002 ... 4586 ... Okay, IP Address = 127.0.53.53 5585 Error on client pre-Connection Select() [Error=10061] Connection refused 5585 Ready to try connection again 7628 Attempting to connect now 7628 Server = THEBITCH 7628 Trying TCP/IP host "THEBITCH" port 8002 ... 7628 ... Okay, IP Address = 127.0.53.53 10670 Giving up server, looking for another! 10670 Server = THEBITCH 10670 Trying TCP/IP host "THEBITCH" port 8002 ... 10670 ... Okay, IP Address = 127.0.53.53 I have since rebuild both laptop and desktop computers changed everything that can possibly be changed on my systems (thepain = laptop thebitch=desktop) to no avail, I suspect I need to see my ISP, Unless someone has a solution. I have used this Settup for a LONG time on many Rebuilds no probs.
Ian P Posted July 21, 2015 Report Posted July 21, 2015 Hi. You need to check your network settings - 127.x.x.x is an internet IP address, not a local area network address. Your local PCs should be on either a 10.x.x.x or a 192.168.x.x range IP address. Cheers, Ian P.
Luke Kolin Posted July 22, 2015 Report Posted July 22, 2015 Hi. You need to check your network settings - 127.x.x.x is an internet IP address, not a local area network address. Your local PCs should be on either a 10.x.x.x or a 192.168.x.x range IP address. Cheers, Ian P. 127.0.0.0/8 is a localhost block. http://serverfault.com/questions/626612/dns-just-started-resolving-my-server-prod-addresses-to-127-0-53-53 Cheers! Luke
Musicman Posted July 22, 2015 Author Report Posted July 22, 2015 Thanks for the replies. My localhost is 10.x.x.x and I don't access my system from outside. This is way outside my knowledge base. the problem still exists after a complete rebuild of both computers and a factory reset of my modem. Regards Frank
Pete Dowson Posted July 22, 2015 Report Posted July 22, 2015 Thanks for the replies. My localhost is 10.x.x.x and I don't access my system from outside. This is way outside my knowledge base. t Please just specify the correct IP address to WideClient. Please read the section in the WideFS User Guide entitled Quote Configure your Network IT IS IMPORTANT FOR ALL USERS TO READ AT LEAST PART OF THIS! Pete
Musicman Posted July 29, 2015 Author Report Posted July 29, 2015 Gday Pete I have been following the above posts on this error and spent many hours trying everything I can come up with and the error still persists. The only time I got a full data stream is when the modem was disconnected from the wall ,But if the modem was plugged in before wide client was shut down my isp shut me out for a while. A little bit of history on the prob. Around February The desk top was clean installed with windows 8.1, p3d and the then current fsuipc + WideClient, All worked faultlessly "the best ever' then when the latest vers of fsuipc was installed I notist WideClient was taking a while to connect but still delivering the goods, I ran ccleaner and from that point Wide client has been knocked back. Her are my logs ect from a clean install of P3d + Fsuipc with firewalls + windows defender turned of on the Laptop, modem and the Server Desktop. [General] UpdatedByVersion=4939u History=CJK1EIMZQUOZSOIPKVO9V InitDelayDevicesToo=No NewInterceptTextMenu=No UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=No DelayedMouseLookZoom=No AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=No OOMcheck=Yes OOMcheckInterval=10 WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 InitialStallTime=10 NormalStallTime=1 LuaRerunDelay=66 Console=No FSVersionUsed="Lockheed Martin® Prepar3D® v2",2.5.12946.0 SimConnectUsed=2.5.0.0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight Yoke 0.GUID={1FD37990-2BEB-11E5-8002-444553540000} 1=Saitek Pro Flight Rudder Pedals 1.GUID={1FD37990-2BEB-11E5-8003-444553540000} [Axes] PollInterval=10 RangeRepeatRate=10 [buttons] PollInterval=25 ButtonRepeat=20,10 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [WideServer] WideFSenabled=Yes AdvertiseService=1 Port=8002 Port2=9002 [sounds] Path=C:\Prepar3D v2\Sound\ Device1=Primary Sound Driver Device2=Speakers (Realtek High Definition Audio) Device3=Realtek Digital Output (Realtek High Definition Audio) Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio) ********* FSUIPC4, Version 4.939u by Pete Dowson ********* Reading options from "C:\Prepar3D v2\Modules\FSUIPC4.ini" Running inside Prepar3D v2 on Windows 8 Module base=63720000 User Name="Frank Salter" User Addr="frank@treko.net.au" FSUIPC4 Key is provided WideFS7 Key is provided 47 System time = 29/07/2015 16:27:53 47 FLT UNC path = "\\THEBITCH\Users\Frank\Documents\Prepar3D v2 Files\" 47 Trying C:\Prepar3D v2\Modules\SimConnectP3D2.dll 47 Found it: trying to connect 63 FS UNC path = "\\THEBITCH\Prepar3D v2\" 391 LogOptions=00000000 00000001 391 --- CONTROLS timer memory location obtained ok 391 --- SIM1 Frictions access gained 391 --- FS Controls Table located ok 391 --- Installed Mouse Macro hooks ok. 391 --- Wind smoothing fix is fully installed 391 SimConnect_Open succeeded: waiting to check version okay 391 Trying to use SimConnect Prepar3D 1860 Running in "Lockheed Martin® Prepar3D® v2", Version: 2.5.12946.0 (SimConnect: 2.5.0.0) 1860 Initialising SimConnect data requests now 1860 FSUIPC Menu entry added 1875 \\THEBITCH\Users\Frank\Documents\Prepar3D v2 Files\stopover.fxml 1875 \\THEBITCH\Prepar3D v2\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air 20625 System time = 29/07/2015 16:28:14, Simulator time = 16:27:57 (20:27Z) 20641 Aircraft="F-22 Raptor - 525th Fighter Squadron" 21641 Starting everything now ... 22797 Advanced Weather Interface Enabled 407219 Sim stopped: average frame rate for last 387 secs = 20.0 fps 414594 System time = 29/07/2015 16:34:48, Simulator time = 16:34:23 (20:34Z) 414594 *** FSUIPC log file being closed Minimum frame rate was 19.8 fps, Maximum was 20.0 fps Minimum available memory recorded was 2215Mb Average frame rate for running time of 387 secs = 20.0 fps Memory managed: 193 Allocs, 193 Freed ********* FSUIPC Log file closed *********** ********* WideServer.DLL Log [version 7.939u] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 29/07/15, Time 16:28:15.203: Server name is THEBITCH 15078 Initialising TCP/IP server 15094 Initialising UDP/IP server 16031 Broadcasting service every 1000 mSecs 389984 Closing down now ... Memory managed: Offset records: 193 alloc, 192 free Read buffer usage: 0 alloc, 0 free, max in session: 0 Write buffer usage: 0 alloc, 0 free, max in session: 0 Throughput maximum achieved: 0 frames/sec, 0 bytes/sec Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec ********* Log file closed ********* ; PLEASE SEE WideFS documentation for parameter details ; ===================================================== [Config] Port=8002 Window=399,14,886,589 Visible=Yes ButtonScanInterval=20 ClassInstance=0 NetworkTiming=5,1 ServerIPAddr=10.1.1.2 ProtocolPreferred=TPC MailslotTiming=2000,1000 PollInterval=2000 Port2=9002 ResponseTime=18 ApplicationDelay=0 TCPcoalesce=No WaitForNewData=500 MaxSendQ=100 OnMaxSendQ=Log NewSendScanTime=50 Priority=3,1,2 ; ----------------------------------------------- [user] Log=Errors+ Runready1=C:\Aplicats\Airport Timetable\AirportTimeTable CloseReady1=kill ; =============================================== [sounds] Path=S:\C:\Aplicats\Airport Timetable\WideFS\Sound\ Device1=Primary Sound Driver Device2=Speakers (Realtek High Definition Audio) ********* WideClient Log [version 6.998b] Class=FS98MAIN ********* Date (dmy): 29/07/15, Time 16:34:19.982: Client name is THEPAIN 531 LUA: "C:\Aplicats\WideFS\Initial.LUA": not found 577 Attempting to connect now 577 Trying to locate server: Protocol not yet decided 577 Failed to connect: waiting to try again 2637 Attempting to connect now 4696 Server = THEBITCH 4696 Trying TCP/IP host "THEBITCH" port 8002 ... 4696 ... Okay, IP Address = 127.0.53.53 5725 Error on client pre-Connection Select() [Error=10061] Connection refused 5725 Ready to try connection again 7753 Attempting to connect now 7753 Server = THEBITCH 7753 Trying TCP/IP host "THEBITCH" port 8002 ... 7753 ... Okay, IP Address = 127.0.53.53 10811 Server = THEBITCH 10811 Trying TCP/IP host "THEBITCH" port 8002 ... 10811 ... Okay, IP Address = 127.0.53.53 13869 Server = THEBITCH 13869 Trying TCP/IP host "THEBITCH" port 8002 ... 13869 ... Okay, IP Address = 127.0.53.53 16926 Server = THEBITCH 16926 Trying TCP/IP host "THEBITCH" port 8002 ... 16926 ... Okay, IP Address = 127.0.53.53 19984 Server = THEBITCH 19984 Trying TCP/IP host "THEBITCH" port 8002 ... 19984 ... Okay, IP Address = 127.0.53.53 23041 Server = THEBITCH 23041 Trying TCP/IP host "THEBITCH" port 8002 ... 23041 ... Okay, IP Address = 127.0.53.53 26099 Server = THEBITCH 26099 Trying TCP/IP host "THEBITCH" port 8002 ... 26099 ... Okay, IP Address = 127.0.53.53 29157 Server = THEBITCH 29157 Trying TCP/IP host "THEBITCH" port 8002 ... 29157 ... Okay, IP Address = 127.0.53.53 32214 Server = THEBITCH 32214 Trying TCP/IP host "THEBITCH" port 8002 ... 32214 ... Okay, IP Address = 127.0.53.53 35272 Server = THEBITCH 35272 Trying TCP/IP host "THEBITCH" port 8002 ... 35272 ... Okay, IP Address = 127.0.53.53 35428 ****** End of session performance summary ****** 35428 Total time connected = 0 seconds 35428 Reception maximum: 0 frames/sec, 0 bytes/sec 35428 Transmission maximum: 0 frames/sec, 0 bytes/sec 35428 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0 35428 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) *********
Pete Dowson Posted July 29, 2015 Report Posted July 29, 2015 577 Trying to locate server: Protocol not yet decided 577 Failed to connect: waiting to try again 2637 Attempting to connect now 4696 Server = THEBITCH 4696 Trying TCP/IP host "THEBITCH" port 8002 ... 4696 ... Okay, IP Address = 127.0.53.53 Where's the WideServer log? The FSUIPC INI and LOG files aren't really relevant to WideFS, but both Server and Client logs are! And the WideClient INI might be relevant. For instance, why is the "Protocol not yet decided"? Have you put the ServerName in but not the Protocol? you must put neither or both in. Is 127.0.53.53 the correct IP address of the server? Currently, all you know is that the connection is refused (error 10061). Either the IP address is bad, or the Protocol is bad or there's sme type of firewall block. Pete
Musicman Posted July 29, 2015 Author Report Posted July 29, 2015 Gday Pete ********* WideServer.DLL Log [version 7.939u] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 29/07/15, Time 16:28:15.203: Server name is THEBITCH 15078 Initialising TCP/IP server 15094 Initialising UDP/IP server 16031 Broadcasting service every 1000 mSecs 389984 Closing down now ... Memory managed: Offset records: 193 alloc, 192 free Read buffer usage: 0 alloc, 0 free, max in session: 0 Write buffer usage: 0 alloc, 0 free, max in session: 0 Throughput maximum achieved: 0 frames/sec, 0 bytes/sec Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec ********* Log file closed ********* ********* WideClient Log [version 6.998b] Class=FS98MAIN ********* Date (dmy): 29/07/15, Time 16:34:19.982: Client name is THEPAIN 531 LUA: "C:\Aplicats\WideFS\Initial.LUA": not found 577 Attempting to connect now 577 Trying to locate server: Protocol not yet decided 577 Failed to connect: waiting to try again 2637 Attempting to connect now 4696 Server = THEBITCH 4696 Trying TCP/IP host "THEBITCH" port 8002 ... 4696 ... Okay, IP Address = 127.0.53.53 5725 Error on client pre-Connection Select() [Error=10061] Connection refused 5725 Ready to try connection again 7753 Attempting to connect now 7753 Server = THEBITCH 7753 Trying TCP/IP host "THEBITCH" port 8002 ... 7753 ... Okay, IP Address = 127.0.53.53 10811 Server = THEBITCH 10811 Trying TCP/IP host "THEBITCH" port 8002 ... 10811 ... Okay, IP Address = 127.0.53.53 13869 Server = THEBITCH 13869 Trying TCP/IP host "THEBITCH" port 8002 ... 13869 ... Okay, IP Address = 127.0.53.53 16926 Server = THEBITCH 16926 Trying TCP/IP host "THEBITCH" port 8002 ... 16926 ... Okay, IP Address = 127.0.53.53 19984 Server = THEBITCH 19984 Trying TCP/IP host "THEBITCH" port 8002 ... 19984 ... Okay, IP Address = 127.0.53.53 23041 Server = THEBITCH 23041 Trying TCP/IP host "THEBITCH" port 8002 ... 23041 ... Okay, IP Address = 127.0.53.53 26099 Server = THEBITCH 26099 Trying TCP/IP host "THEBITCH" port 8002 ... 26099 ... Okay, IP Address = 127.0.53.53 29157 Server = THEBITCH 29157 Trying TCP/IP host "THEBITCH" port 8002 ... 29157 ... Okay, IP Address = 127.0.53.53 32214 Server = THEBITCH 32214 Trying TCP/IP host "THEBITCH" port 8002 ... 32214 ... Okay, IP Address = 127.0.53.53 35272 Server = THEBITCH 35272 Trying TCP/IP host "THEBITCH" port 8002 ... 35272 ... Okay, IP Address = 127.0.53.53 35428 ****** End of session performance summary ****** 35428 Total time connected = 0 seconds 35428 Reception maximum: 0 frames/sec, 0 bytes/sec 35428 Transmission maximum: 0 frames/sec, 0 bytes/sec 35428 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0 35428 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) *********
Musicman Posted July 29, 2015 Author Report Posted July 29, 2015 Sorry Plus Wide client Ini ; PLEASE SEE WideFS documentation for parameter details; ===================================================== [Config]Port=8002Window=399,14,886,589Visible=YesButtonScanInterval=20ClassInstance=0NetworkTiming=5,1ServerIPAddr=10.1.1.2ProtocolPreferred=TPCMailslotTiming=2000,1000PollInterval=2000Port2=9002ResponseTime=18ApplicationDelay=0TCPcoalesce=NoWaitForNewData=500MaxSendQ=100OnMaxSendQ=LogNewSendScanTime=50Priority=3,1,2 ; -----------------------------------------------[user]Log=Errors+Runready1=C:\Aplicats\Airport Timetable\AirportTimeTableCloseReady1=kill; ===============================================[sounds]Path=S:\C:\Aplicats\Airport Timetable\WideFS\Sound\Device1=Primary Sound DriverDevice2=Speakers (Realtek High Definition Audio)
Pete Dowson Posted July 29, 2015 Report Posted July 29, 2015 Sorry Plus Wide client Ini [Config] ... ServerIPAddr=10.1.1.2 ProtocolPreferred=TPC TPC? No such animal! Change that to TCP or UDP! This has the ServerIP address as 10.1.1.2, so what's thw computer called "THEBITCH" with IP Address = 127.0.53.53? Pete
Musicman Posted July 29, 2015 Author Report Posted July 29, 2015 oops Sorry Pete The computer Name = THEBITCH and it IP addr = 10.1.1.2 TCP or UDP both produce the same error result. Regards Frank
Luke Kolin Posted July 29, 2015 Report Posted July 29, 2015 The 127.0.53.53 addresses are the result of misconfigured name resolution. In those situations it's best to use the IP address rather than the host name. Cheers! Luke
Pete Dowson Posted July 29, 2015 Report Posted July 29, 2015 The computer Name = THEBITCH and it IP addr = 10.1.1.2 TCP or UDP both produce the same error result. Sorry, the "ProtocolPreferred" parameter is a Server parameter. don't know why that's in the WideClinet.INI? You need Protocol=TCP Pete
Musicman Posted July 29, 2015 Author Report Posted July 29, 2015 Thanks Pete I am now getting data from the server. Strange thing is I have tried this combo before ,Must have done something in my blundering around my settup. Regards Frank.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now