Jump to content
The simFlight Network Forums

Didn't assign Joy Numbers


Recommended Posts

Pete,

I am making a reduced overhead for my cockpit and whilst waiting for some annunciator parts to arrive I impatiently decided to attach the almost finished project and get the switches assigned via ifly2fsuipc.

This is where I have run into a problem - not unexpected since I have not yet used Joy Numbers.

Following is a convoluted report on what is happening and what I am trying to do i.e. unplug and re plug an overhead using 3 of these cards.

 

I have attached to my sim 6 Bodnar cards and 1 phidget LED 64 card (another Phidget LED 64 to be added soon).

The cards:

BU0836A (Yoke) attached via Hub 1 – is OK

BU0836X (Throttle) attached via Hub 1 – is OK

1 * Button Box (MIP switches) – attached via HUB 1 – picking up switch inputs previously assigned to the steering tiller card switches (which was originally attached to HuB 1 but is now attached to HUB 2)

 

BU0836 X (Steering Tiller ) now attached via HuB 2 – steering tiller axis remains ok.

 

2* Button Box – attached via HUB 2 – not ok.--- I set 1 of these to run the lights panel but it “lost” these inputs after it was disconnected to repair a wire connection issue.

 

Hub 1 is a powered 7 port Hub and Hub 2 is 7 port but unpowered (although it can have power attached)

 

I will have to disconnect the ovhd again when the parts arrive so is it best to leave all switch programming until I will no longer need to remove the USB connections?

 

Or can I “rescue” any of the existing misplaced assignments?

Sorry for the convoluted description – hope you can make some sense of it.

William

 

[General]
UpdatedByVersion=4949
History=AESX9KG8MO07G59DUE7SU
InitDelayDevicesToo=No
NewInterceptTextMenu=No
UseSystemTime=Yes
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
AutoScanDevices=Yes
AssignJoystickIDs=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=Yes
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
DelayedMouseLookZoom=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=No
OOMcheck=Yes
OOMcheckInterval=10
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
Console=No
FSVersionUsed="Lockheed Martin� Prepar3D� v3",3.2.3.2
SimConnectUsed=3.2.0.0

[JoyNames]
AutoAssignLetters=No
0=BU0836X Interface
0.GUID={EAE918B0-D1C7-11E5-8002-444553540000}
2=Button Box Interface
2.GUID={EAF46350-D1C7-11E5-8008-444553540000}
4=Saitek Pro Flight Rudder Pedals
4.GUID={EB0468E0-D1C7-11E5-800F-444553540000}
1=BU0836A Interface
1.GUID={0F63D980-EACF-11E5-8001-444553540000}
3=Button Box Interface
3.GUID={EAFA56C0-D1C7-11E5-800B-444553540000}
5=BU0836X Interface
5.GUID={6210C970-D8AC-11E5-8001-444553540000}
6=Button Box Interface
6.GUID={F055AC10-A808-11E6-8001-444553540000}

[Axes]
PollInterval=10
RangeRepeatRate=10
0=0X,256,D,4,0,0,0
1=0Y,256,D,22,0,0,0
2=0Y,B,15016,16383,66065,0
3=0Y,B,8752,13944,66066,0,66067,0
4=1X,256,D,2,0,0,0
5=1Y,256,D,1,0,0,0
6=1P,0,F,66416,0,0,0
7=4X,256,D,7,0,0,0
8=4Y,256,D,8,0,0,0
9=4R,6696,D,3,0,0,0
10=5X,256,D,36,0,0,0

[Buttons]
PollInterval=25
ButtonRepeat=20,10
2=P1,13,C65680,0
3=U1,13,C65674,0
5=P1,12,C65678,0
6=U1,12,C65674,0
11=P3,15,Cx03009400,x00000007
12=U3,15,Cx03009400,x00000008
13=P3,30,Cx03009400,x0000000E
14=U3,30,Cx03009400,x0000000F
15=P3,29,Cx03009400,x00000010
16=U3,29,Cx03009400,x0000000F
17=P3,31,Cx03009400,x00000018
18=U3,31,Cx03009400,x00000019
20=P0,14,Cx03009400,x000000E9
21=P0,13,Cx03009400,x000000EA
22=P3,4,Cx03009400,x000001E7
23=U3,4,Cx03009400,x000001E6
24=P3,5,Cx03009400,x000001ED
25=U3,5,Cx03009400,x000001EC
26=P2,30,Cx03009400,x00000495
28=P2,31,Cx03009400,x00000493
29=P0,1,Cx03009400,x0000025F
30=P0,2,Cx03009400,x00000260
31=P0,0,C65595,0
32=P0,3,Cx03009400,x00000261
33=P0,4,Cx03009400,x00000262
34=P0,5,Cx03009400,x00000263
35=P0,6,Cx03009400,x00000264
36=P0,7,Cx03009400,x00000265
37=P0,8,Cx03009400,x00000266
38=P0,12,Cx03009400,x00000499
39=U0,12,Cx03009400,x0000049A
40=R0,11,K113,8
41=P0,9,Cx03009400,x000001FE
42=U0,9,Cx03009400,x000001FF
43=P0,10,Cx03009400,x00000201
44=U0,10,Cx03009400,x00000202
52=P3,7,K80,8
53=P2,18,Cx03009400,x000004AE
54=P2,19,Cx03009400,x000004AF
55=P2,23,Cx03009400,x000004B0
56=P2,21,Cx03009400,x000004B1
57=P2,22,Cx03009400,x000004B2
58=P2,20,Cx03009400,x000004B3
59=P2,24,Cx03009400,x000004DA
60=U2,24,Cx03009400,x000004DC
61=P3,9,Cx03009400,x000001F5
62=P3,12,K56,9
63=P3,14,K53,9
64=P3,13,K54,9
65=P2,2,Cx03009400,x000002E1
66=P2,1,Cx03009400,x000002E2
67=P2,0,Cx03009400,x000002E3
68=P2,12,Cx03009400,x000002D3
69=P2,11,Cx03009400,x000002D4
70=P3,2,Cx03009400,x00000207
71=U3,2,Cx03009400,x00000206
72=P3,3,Cx03009400,x00000205
74=R3,22,C65588,0
75=P5,28,K74,10
76=P2,3,Cx03009400,x0000049B
77=P2,28,Cx03009400,x0000049C
78=P5,31,K80,9
79=P5,29,K49,8
80=P5,30,K50,8
81=P5,27,K83,8
82=P5,25,K87,8
83=P5,23,K65,8
92=P3,6,Cx03009400,x00000141
95=P1,0,Cx03009400,x000000E8
96=R1,3,C65607,0
97=R1,2,C65615,0
100=R1,10,C65671,0
101=R1,9,C65735,0
102=R1,11,C65734,0
103=R1,8,C65672,0
104=U2,31,Cx03009400,x00000494
105=P3,28,Cx03009400,x00000001
106=U3,28,Cx03009400,x00000002
107=P3,16,Cx03009400,x00000462
108=U3,16,Cx03009400,x00000461
109=P3,1,Cx03009400,x00000465
110=U3,1,Cx03009400,x00000464
111=P5,24,C1079,0
112=P3,21,C1079,0
113=P2,15,Cx03009400,x000002D3
114=P2,13,Cx03009400,x000002D5
115=U2,15,Cx03009400,x000002D4
116=P6,11,Cx03009400,x00000001
117=P6,10,Cx03009400,x00000007
118=U6,10,Cx03009400,x00000008
119=U6,11,Cx03009400,x00000002
120=P6,21,Cx03009400,x00000010
121=U6,21,Cx03009400,x0000000F
122=P6,20,Cx03009400,x0000000E
123=U6,20,Cx03009400,x0000000F
124=P6,18,Cx03009400,x00000015
125=U6,18,Cx03009400,x00000016
129=P6,5,Cx03009400,x000001E6
130=P6,6,Cx03009400,x000001E7
131=P6,8,Cx03009400,x000001E8
132=P6,7,Cx03009400,x000001E9
133=P6,3,Cx03009400,x000001EC
134=P6,0,Cx03009400,x000001ED
135=P6,2,Cx03009400,x000001EE
136=P6,1,Cx03009400,x000001EF
137=P6,23,Cx03009400,x00000205
138=P6,22,Cx03009400,x00000207
139=U6,22,Cx03009400,x00000206

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No

[GPSout2]
GPSoutEnabled=No

[WideServer]
WideFSenabled=Yes

[Sounds]
Path=E:\P3Dv3.1\Sound\
Device1=Primary Sound Driver
Device2=Headphones (2- High Definition Audio Device)
Device3=Digital Audio (S/PDIF) (2- High Definition Audio Device)
Device4=SAMSUNG-0 (NVIDIA High Definition Audio)

[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16217,-3310,1806,16133
Rudder=-15996,-512,512,12160
Throttle=-16183,11328
LeftBrake=-16384,16383/16
RightBrake=-16383,16384/16
Spoilers=-14294,7440
SteeringTiller=-16380,1024,1616,16380
SlopeSteeringTiller=15
Elevator=-16384,-512,512,16383/16

[Monitor]
Display=4
Monitor0=0,024C,4,0

[Profile.iFly]
1=iFly 737-800 (Wide screen)

[Buttons.iFly]
0=P3,28,Cx03009400,x00000001
1=U3,28,Cx03009400,x00000002

[Window.LUA display]
Docked=7357, 2986, 3513, 2418

[LuaFiles]
1=testfsi

 

 

 

 

Link to comment
Share on other sites

All of your assignments will still be there, just with the wrong joystick Id number. You could either try to locate each in the INI and change the ID used, or, probably easier, use the JoyID utility to change the IDS.

Either way, once they are correct, change to using Joy Letters, so FSUIPC can track devices when you disconnect and reconnect them.

Pete

 

Link to comment
Share on other sites

Pete,

Thank you very much for your fast reply. So by using the JoyID utility I have , by luck!!, now got Throttle card =OK, Yoke card=OK, MIP Button Box =now OK. Haven't tested but am assuming the Saitek Rudder Pedals will be ok also.

That leaves me with the 3 cards ----2*Button Box and 1*BUX card in the new Overhead. I hadn't assigned very much to them (only the lights panel including the APU and Engine start switches).

So my plan is to now assign Joy letters to all cards and then start afresh with the assignments in the three cards in the overhead. Does that sound sensible?

Once I get the joy letters in place then I can remove the ovhd to continue work installing the annunciators and I will not lose any completed assignments.

William

Link to comment
Share on other sites

Good morning Pete,

Aha I managed to get my "lost" assignments back using the JoyID utility and have set auto assign to Yes and all is good. Thank you very much for your guidance.

Take care,

William

PS - You have helped me before (several years ago) but for some reason the site didn't recognise my email address, which hasn't changed, and I had to Register again - hence the low number of posts.

Link to comment
Share on other sites

5 minutes ago, 13Aces said:

PS - You have helped me before (several years ago) but for some reason the site didn't recognise my email address, which hasn't changed, and I had to Register again

Your registration might have been lost when SimFlight changed servers and software systems. I think a lot of folks lost access temporarily. Probably the conversion of the database only included users active within a certain period.

Pete

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.