Fsuipc not reload saved values on .ini

[sisoffi]

Hi Pete,

I have this problem for a long time in prepar3D also updating to the latest version as you suggested.

I need to adjust the values of the flap potentiometer through the ini, save the file and read it to fsuipc with reload all axignement.

Nothing to do, need to restart P3D. Any suggestions? Attached to the log.

Simone

FSUIPC4.log

[Thomas Richter]

Hi,

can you show the FSUIPC4.ini file and which values you need to modify manually, please.

Thomas

[sisoffi]

the lines are:

FlapStarts=-16384,-16100,-14200,-13397,-12200,-10730
FlapEnds=-16300,-15000,-13397,-12700,-11259,15919

i need to setup via ini because the flaps have reduce range need to calibrate it and reload axxignements in real time.

 

 

 

[General]
UpdatedByVersion=4969
History=VVKP85J2ERYGJP4CTZSDH
InitDelayDevicesToo=No
Annotate=Yes
NewInterceptTextMenu=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
NewDeleteVehiclesForAES=No
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
DelayedMouseLookZoom=No
WideLuaGlobals=Yes
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
ThreadAffinityMask=x0
LuaAffinityMask=x0
InitDelay=0
GetNearestAirports=Yes
LogOptionProtect=Yes
OOMcheck=Yes
OOMcheckInterval=10
TimeForLuaClosing=2
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=20
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
Console=No
FSVersionUsed="Lockheed Martin® Prepar3D® v3",3.4.18.19475
SimConnectUsed=3.4.0.0

[JoyNames]
AutoAssignLetters=No
0=Saitek Pro Flight Combat Rudder Pedals
0.GUID={B87A8170-9540-11E5-8008-444553540000}
1=Saitek Pro Flight Combat Rudder Pedals
1.GUID={B87AA880-9540-11E5-8009-444553540000}
2=BU0836X Interface
2.GUID={B87AA880-9540-11E5-800A-444553540000}
3=BU0836X Interface
3.GUID={B87ACF90-9540-11E5-800B-444553540000}

[Axes]
PollInterval=10
RangeRepeatRate=10
0=0X,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
1=0Y,256,D,8,0,0,0    -{ DIRECT: RightBrake }-
2=0R,256,D,3,0,0,0    -{ DIRECT: Rudder }-
3=1X,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
4=1Y,256,D,8,0,0,0    -{ DIRECT: RightBrake }-
5=1R,256,D,3,0,0,0    -{ DIRECT: Rudder }-
6=3X,256,D,2,0,0,0    -{ DIRECT: Elevator }-
7=3Y,256,D,1,0,0,0    -{ DIRECT: Aileron }-
8=3R,256,D,10,0,0,0    -{ DIRECT: Throttle2 }-
9=3U,256,D,23,0,0,0    -{ DIRECT: Flaps }-
10=3V,256,D,22,0,0,0    -{ DIRECT: Spoilers }-
11=3S,256,D,9,0,0,0    -{ DIRECT: Throttle1 }-

[MacroFiles]
1=MD80 AUDIOPANEL
2=MD82DIMMERS
3=MD82EFIS_CS
4=MD82EFIS_FO
5=MD82FMS
6=MD82GLARE
7=MD82MCP
8=MD82MIP
9=MD82OVERHEAD
10=MD82PEDESTAL
11=MD82RADAR
12=MD82TRC
13=MD82_MENU

[LuaFiles]
1=MD80_EAOP_LEDS
2=log lvars

[Auto]
1=Lua MD80_EAOP_LEDS

[Buttons]
PollInterval=25
ButtonRepeat=20,10
1=P3,5,CM10:8,1     -{Macro MD82PEDESTAL: PNEU_XFEED_R}-
2=U3,5,CM10:8,0     -{Macro MD82PEDESTAL: PNEU_XFEED_R}-
3=P3,4,CM10:7,1     -{Macro MD82PEDESTAL: PNEU_XFEED_L}-
4=U3,4,CM10:7,0     -{Macro MD82PEDESTAL: PNEU_XFEED_L}-
5=P3,2,C65988,0     -{MIXTURE2_RICH}-
6=U3,2,C65992,0     -{MIXTURE2_LEAN}-
7=P3,1,C65983,0     -{MIXTURE1_RICH}-
8=U3,1,C65987,0     -{MIXTURE1_LEAN}-
9=R3,7,CM10:2,0     -{Macro MD82PEDESTAL: GEAR HORN}-
10=R3,13,CM10:3,0     -{Macro MD82PEDESTAL: LONGTRIM_INC}-
11=R3,14,CM10:4,0     -{Macro MD82PEDESTAL: LONGTRIM_DEC}-
12=R3,3,CM10:12,0     -{Macro MD82PEDESTAL: ALT_LONG_TRIM}-
13=P3,6,CM10:6,1     -{Macro MD82PEDESTAL: RUD_HYD_CONT}-
14=U3,6,CM10:6,0     -{Macro MD82PEDESTAL: RUD_HYD_CONT}-
15=P3,12,CM10:5,1     -{Macro MD82PEDESTAL: FUELXFEED}-
16=U3,12,CM10:5,0     -{Macro MD82PEDESTAL: FUELXFEED}-
17=R3,15,CM10:4,0     -{Macro MD82PEDESTAL: LONGTRIM_DEC}-
18=R3,16,CM10:3,0     -{Macro MD82PEDESTAL: LONGTRIM_INC}-
19=P3,17,CM7:4,0     -{Macro MD82MCP: AP}-
20=P3,10,CM7:3,0     -{Macro MD82MCP: ATHR}-
21=P3,9,CM10:1,0     -{Macro MD82PEDESTAL: TO/GA}-
22=P3,11,CM10:1,0     -{Macro MD82PEDESTAL: TO/GA}-
23=P2,7,K113,9     -{Key press: shft+F2}-
24=P2,6,K114,9     -{Key press: shft+F3}-
25=P2,0,K115,9     -{Key press: shft+F4}-
26=P2,5,K116,9     -{Key press: shft+F5}-
27=P2,4,K119,9     -{Key press: shft+F8}-
28=P2,1,CM1:2,0     -{Macro MD80 AUDIOPANEL: PA_INT_BUTT}-
29=P2,17,K49,8     -{Key press: 1}-
30=P2,13,K50,8     -{Key press: 2}-
31=P2,12,K55,8     -{Key press: 7}-
32=P2,15,K57,8     -{Key press: 9}-
33=P2,10,K123,10     -{Key press: ctl+F12}-
34=P3,26,CM11:1,0     -{Macro MD82RADAR: CPT_TFR}-
35=P3,25,CM11:2,0     -{Macro MD82RADAR: CPT_WX+T}-
36=P3,24,CM11:3,0     -{Macro MD82RADAR: CPT_WX}-
37=P3,23,CM11:4,0     -{Macro MD82RADAR: CPT_MAP}-
38=P3,22,CM11:5,0     -{Macro MD82RADAR: CPT_CGS}-
39=P3,31,CM11:6,0     -{Macro MD82RADAR: PWR}-
40=P3,34,CM11:14,0     -{Macro MD82RADAR: CPT_TILT_DEC}-
41=P3,28,CM11:7,0     -{Macro MD82RADAR: TEST}-
42=P3,30,CM11:10,0     -{Macro MD82RADAR: FO_WX}-
43=P3,29,CM11:11,0     -{Macro MD82RADAR: FO_MAP}-
44=P3,36,CM11:13,0     -{Macro MD82RADAR: CPT_TILT_INC}-
47=P2,14,C65752,1     -{PARKING_BRAKES}-
48=U2,14,C65752,0     -{PARKING_BRAKES}-
49=P2,21,C65752,0     -{PARKING_BRAKES}-
50=P2,11,CM1:1,0     -{Macro MD80 AUDIOPANEL: PA_INT_SWITCH}-
51=R3,0,C66080,0     -{GEAR_DOWN}-
52=U3,0,C66079,0     -{GEAR_UP}-
53=U2,11,C0,0     -{Custom control: <0>}-

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No

[GPSout2]
GPSoutEnabled=No

[Traffic Limiter]
TrafficLimit=0
AirportPreference=50
GroundPreference=50
NearerPreference=50
PlannedAirportsPreference=50
TargetFrameRate=0

[WideServer]
WideFSenabled=Yes

[Sounds]
Path=C:\Lockheed Martin\Prepar3D v3\Sound\
Device1=Driver audio principale
Device2=Altoparlanti (Realtek High Definition Audio)
Device3=Altoparlanti (4- C-Media USB Headphone Set  )
Device4=Altoparlanti (Sound Blaster X-Fi Go! Pro)

[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=No
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=Yes
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
MaxSteerSpeed=60
Throttle1=-16319,-8200,-2787,15544/8
Throttle2=-16311,-8568,-4885,13712/8
Elevator=-16380,-512,512,16380
LeftBrake=13741,16384/24
RightBrake=12684,16384/24
Spoilers=-14814,-7031/8
Rudder=16320,16320,16320,16380/8
Flaps=-15863,-10242/8
FlapStarts=-16384,-16100,-14200,-13397,-12200,-10730
FlapEnds=-16300,-15000,-13397,-12700,-11259,15919
Aileron=-10832,3147,6526,16359/24
SlopeAileron=-13
SteeringTillerControl=0
SteeringTiller=-16380,0,0,16380/8
SlopeRightBrake=-15
SlopeRudder=-15
SlopeSteeringTiller=15

[Programs]
Run1=READY,CLOSE,"E:\Programmi\IOCards\Modules\IOCModules.exe"
Run2=READY,CLOSE,"C:\OpusFSI\FSISERVER.EXE"
Run3=READY,CLOSE,"C:\Program Files (x86)\FlyingWSimulation\SuperTrafficBoard for Prepar3D V3\TrafficBoardFrontEnd.exe"
Run4=READY,CLOSE,"C:\Program Files (x86)\SkalarkiIO Profiler\SkalarkiIOProfiler.exe"
 

[Thomas Richter]

Hi,

when you use the sequence FSUIPC closed -> change INI -> save INI -> open FSUIPC -> reload settings. Everything changes here to the new settings, I used your settings for that.

Thomas

[sisoffi]

Thomas:

modify INI = Close INI (i cannot save and mantain open INI?)

open FSUIPC = reload settings = Close FSUiPC = Reopen FSUIPC? (cannot mantain open fsuipc?)

 

thanks