FSUIPC not recognising FO yoke

[Driver170]

I just hooked up my FO yoke and rudder pedals from Flybycockpits and in FSUIPC axis assignments nothing is getting detected just my captain side

[Driver170]

I'm using prosim if that helps and P3D V3

[Driver170]

Whenever i plug in the captains Main flight control box (ethernet cable from yoke and rudder pedals connects to this box) or the FO MFCB the settings transfer over to that one that connects. Its like I can't start a fresh setup for my prosim profile.

[Driver170]

Another update.

I backed up my FSUIPC.ini and started a fresh and only one side is getting recognised (FO) and not the captain, no axis or switches are recognised 

[Pete Dowson]

I need the log and the INI file, and the joyscan CSV file. And make sure you are using a currently supported version (of FSUIPC -- 4.971 for P3D3).

Does P3D3 see those devices?

I cannot help with virtually zero information. Sorry.

Do

3 hours ago, Driver170 said:

Flybycockpits

supply a driver? if the device(s) are normal jotstick type devices you probably shouldn't be using it if so.

I see you are the person who posted another thread here just rudely saying "bump"? Please do not do such things. It wont be taken kindly. if it was meant to attract faster attention, it didn't work. You only started this thread 3 hours ago! How fast do you expect a response? With most support sites you'd be lucky to get one the same day. I only caught it now because i tend to do a quick scan befor going to bed -- it is gone midnight here!

And I won't be around much tomorrow. Many other things to attend to!

Pete

 

[Driver170]

[General]
ASNwxRadarPath=C:\Prosim\ProSim737-v1.46\ProSim737\ProSim737\radar.bin
Console=No
UpdatedByVersion=4965
History=JDLZQWA3OIU8CWUJI70LB
InitDelayDevicesToo=No
NewInterceptTextMenu=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
AutoScanDevices=Yes
AssignJoystickIDs=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=No
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=Yes
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=Yes
RudderSpikeRemoval=Yes
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
DelayedMouseLookZoom=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
OOMcheck=Yes
OOMcheckInterval=10
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
Annotate=Yes
NewDeleteVehiclesForAES=No
LogOptionProtect=Yes
TimeForLuaClosing=1
WideLuaGlobals=Yes
ThreadAffinityMask=x0
LuaAffinityMask=x0
FSVersionUsed="Lockheed Martin® Prepar3D® v3",3.4.18.19475
SimConnectUsed=3.4.0.0

[Auto]
1=LuaDynamicFriction

[LuaFiles]
1=DynamicFriction

[JoyNames]
AutoAssignLetters=Yes

A=Saitek Pro Flight Rudder Pedals
B=737YOKE-LE by ACE
C=JetMAX 737 Throttle
D=Flybycockpits
E=Saitek Pro Flight Yoke
F=Flybycockpits
F.GUID={E1A43F20-297C-11E6-8001-444553540000}
0=Flybycockpits
0.GUID={E1A43F20-297C-11E6-8001-444553540000}
1=Flybycockpits
1.GUID={E1A43F20-297C-11E6-8001-444553540000}
2=JetMAX 737 Throttle
2.GUID={A9095060-D445-11E5-8011-444553540000}

[Axes]
PollInterval=10
RangeRepeatRate=10

[Buttons]
PollInterval=25
ButtonRepeat=20,10

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No

[GPSout2]
GPSoutEnabled=No

[WideServer]
WideFSenabled=Yes
AdvertiseService=1
Port=8002
Port2=9002
AllowShutdown=YES
ShutDownHotKey=69,11

[Sounds]
Path=C:\P3D\Sound\
Device1=Primary Sound Driver
Device2=Speakers (Turtle Beach Z300)
Device3= (High Definition Audio Device)
Device4=HDMI to VGA (High Definition Audio Device)

[Profile.737NGX]
1=737NGX
2=Boeing 737-8ASNGX Ryanair (EI-ESR) Winglets

[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60

[JoystickCalibration.737NGX]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Spoilers=-16384,15827
Flaps=-16274,16383
Throttle1=-16059,-512,512,16380/32
Throttle2=-15866,-512,512,16380/32
SyncSlopeThrottle2=3/3,8/6,11/9,18/17,24/22,36/34,41/39,48/45,53/50,58/53,63/60,69/63,74/70,83/79,86/80,89/84,97/93,102/99,105/102,110/110,113/113,118/118,123/124,127/128
Rudder=-16380,-106,2078,16380/16
LeftBrake=-16383,16384/16
RightBrake=-8402,15123/16
Aileron=-16384,-108,-108,16383
Elevator=-16384,-566,821,16383/16

[Axes.737NGX]
RangeRepeatRate=10
3=EX,256,D,1,0,0,0    -{ DIRECT: Aileron }-
4=EY,256,D,2,0,0,0    -{ DIRECT: Elevator }-
0=DX,256,D,1,0,0,0    -{ DIRECT: Aileron }-
1=DY,256,D,2,39,0,0    -{ DIRECT: Elevator, SlewAhead }-
2=DZ,256,D,3,47,0,0    -{ DIRECT: Rudder, Rudder/SlewHdg }-
5=DU,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
6=DV,420,D,8,0,0,0    -{ DIRECT: RightBrake }-
7=CR,256,D,23,0,0,0    -{ DIRECT: Flaps }-
8=CU,256,D,22,0,0,0    -{ DIRECT: Spoilers }-
9=CV,256,D,10,0,0,0    -{ DIRECT: Throttle2 }-
10=CS,256,D,9,0,0,0    -{ DIRECT: Throttle1 }-

[Buttons.737NGX]
0=PC,6,C65861,0     -{AUTO_THROTTLE_TO_GA}-
1=PB,3,C65580,0
2=PC,2,C65860,0     -{AUTO_THROTTLE_ARM}-
3=PC,8,C70320,0     -{Custom control: <70320>}-
4=UC,8,C70320,1     -{Custom control: <70320>}-
5=PC,7,C70321,0     -{Custom control: <70321>}-
6=UC,7,C70321,1     -{Custom control: <70321>}-
9=PB,4,C65552,0
10=RC,3,C66634,0     -{THROTTLE_DECR_SMALL}-
11=RC,1,C65966,0     -{THROTTLE1_DECR}-
12=UC,1,C65967,0     -{THROTTLE1_CUT}-
13=RC,4,C65971,0     -{THROTTLE2_DECR}-
14=UC,4,C65972,0     -{THROTTLE2_CUT}-
16=RB,0,C65615,0
17=RB,1,C65607,0
18=PC,0,C65752,0     -{PARKING_BRAKES}-
19=UC,0,C65752,0     -{PARKING_BRAKES}-
20=RD,1,C65615,0     -{ELEV_TRIM_UP}-
21=RD,3,C65615,0     -{ELEV_TRIM_UP}-
22=RD,0,C65607,0     -{ELEV_TRIM_DN}-
23=RD,2,C65607,0     -{ELEV_TRIM_DN}-
24=PD,6,C65580,0     -{AP_MASTER}-
25=PD,4,C65552,0     -{SOUND_TOGGLE}-

[Keys.737NGX]
14=223,8,66278,0     -{`¬key: Press=RUDDER_TRIM_LEFT }-
15=49,8,66279,0     -{1: Press=RUDDER_TRIM_RIGHT }-
Display=4
Monitor0=0,024C,4,0
17=121,8,66297,0     -{F10: Press=TOGGLE_AUTOFEATHER_ARM }-
18=122,8,66287,0     -{F11: Press=TOGGLE_PROPELLER_SYNC }-
20=122,8,66317,0     -{F11: Press=TOGGLE_ALTERNATE_STATIC }-
22=81,8,66695,0     -{Q: Press=TOGGLE_JETWAY }-
23=46,8,66287,0     -{Del: Press=TOGGLE_PROPELLER_SYNC }-
25=46,8,66782,0     -{Del: Press=G1000_MFD_CLEAR_BUTTON }-
28=46,8,66297,0     -{Del: Press=TOGGLE_AUTOFEATHER_ARM }-

[Profile.Prosim 737 RYR]
1=Prosim_737_800_Winglets_Ryanair 800W
2=Prosim_737_800_Winglets_Ryanair 800W

[Axes.Prosim 737 RYR]
RangeRepeatRate=10
0=AX,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
1=AY,256,D,8,0,0,0    -{ DIRECT: RightBrake }-
2=AR,256,D,3,47,0,0    -{ DIRECT: Rudder, Rudder/SlewHdg }-
3=EX,256,D,1,45,0,0    -{ DIRECT: Aileron, Aileron/SlewSide }-
4=EY,256,D,2,46,0,0    -{ DIRECT: Elevator, Elev/SlewAhead }-
5=DX,256,D,1,38,0,0    -{ DIRECT: Aileron, SlewSide }-
6=DY,256,D,2,39,0,0    -{ DIRECT: Elevator, SlewAhead }-
7=DZ,256,D,3,47,0,0    -{ DIRECT: Rudder, Rudder/SlewHdg }-
8=DU,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
9=DV,256,D,8,0,0,0    -{ DIRECT: RightBrake }-
10=CV,256,D,10,0,0,0    -{ DIRECT: Throttle2 }-
11=CS,256,D,9,0,0,0    -{ DIRECT: Throttle1 }-

[Buttons.Prosim 737 RYR]
0=PC,0,C65752,0     -{PARKING_BRAKES}-
1=UC,0,C65752,0     -{PARKING_BRAKES}-
2=PC,6,C65861,0     -{AUTO_THROTTLE_TO_GA}-
4=PC,8,C70320,0     -{Custom control: <70320>}-
5=UC,8,C70320,1     -{Custom control: <70320>}-
6=PC,7,C70321,0     -{Custom control: <70321>}-
7=UC,7,C70321,1     -{Custom control: <70321>}-
10=RE,3,C65615,0     -{ELEV_TRIM_UP}-
11=RE,2,C65607,0     -{ELEV_TRIM_DN}-
22=RC,3,C66634,0     -{THROTTLE_DECR_SMALL}-
23=RC,1,C65966,0     -{THROTTLE1_DECR}-
24=UC,1,C65967,0     -{THROTTLE1_CUT}-
25=RC,4,C65971,0     -{THROTTLE2_DECR}-
26=UC,4,C65972,0     -{THROTTLE2_CUT}-
31=RD,6,C65791,0     -{AUTOPILOT_OFF}-
34=PD,4,C65552,0     -{SOUND_TOGGLE}-
35=PC,5,C65860,0     -{AUTO_THROTTLE_ARM}-
36=PC,2,C65860,0     -{AUTO_THROTTLE_ARM}-

[JoystickCalibration.Prosim 737 RYR]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Rudder=-16343,-606,3878,16384/16
LeftBrake=-9258,16380/16
RightBrake=-9201,16380/16
Throttle1=-15410,-512,512,16383/32
Throttle2=-15349,-512,512,16383/32
Aileron=-16376,-607,719,16358
Elevator=-16247,-512,512,16279/16
SyncSlopeThrottle2=0/0,7/7,10/10,24/23,37/35,40/39,53/49,76/73,93/90,104/104,127/128
SlopeAileron=-7
SlopeElevator=-5
SlopeRudder=3

[Profile.prosim]
1=Prosim_737_800_Winglets_Prosim_Livery

[Axes.prosim]
RangeRepeatRate=10
0=CU,256,D,22,0,0,0    -{ DIRECT: Spoilers }-

[JoystickCalibration.prosim]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Spoilers=-16135,16383

[ClientNames]
1=VERNON2-PC

[MacroFiles]
1=WXRadar

[Keys.Prosim 737 RYR]
1=74,10,66695,0     -{ctl+J: Press=TOGGLE_JETWAY }-

[Traffic Limiter]
AirportPreference=50
PlannedAirportsPreference=50
GroundPreference=50
NearerPreference=50
TargetFrameRate=0
TrafficLimit=0
 

[Driver170]

********* FSUIPC4, Version 4.965 (6th April 2017) by Pete Dowson *********
Windows 7 Home Premium 64 Bit with SP 1.0 reported as Build 7601 (OS 6.1)
Prepar3D.exe version = 3.4.18.19475
Reading options from "C:\P3D\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 7
Module base=18150000
User Name="vernon howells"
User Addr="vernon_howells16@hotmail.co.uk"
FSUIPC4 Key is provided
WideFS7 Key is provided
       16 System time = 13/10/2017 12:30:05
       16 FLT UNC path = "\\VERNON-PC\Users\Vernon\Documents\Prepar3D v3 Files\"
       16 ------ Module Version Check ------
       16        acontain.dll: 3.4.18.19475
       16             api.dll: 3.4.18.19475
       16        controls.dll: 3.4.18.19475
       16      fs-traffic.dll: 3.4.18.19475
       16             G3D.dll: 3.4.18.19475
       16        language.dll: 3.4.18.19475
       16            sim1.dll: 3.4.18.19475
       16        visualfx.dll: 3.4.18.19475
       16         weather.dll: 3.4.18.19475
       16          window.dll: 3.4.18.19475
       16 ----------------------------------
       16 Trying C:\P3D\Modules\SimConnectP3D3.dll
       31 Found it: trying to connect
       31 FS UNC path = "\\VERNON-PC\P3D\"
      141 ---------------------- Joystick Device Scan -----------------------
      141 Product= Flybycockpits
      141    Manufacturer= Leo Bodnar
      141    Serial Number= B59078
      141    Vendor=16C0, Product=05BA (Version 1.36)
      141    Assigned joystick id 0 (Registry okay)
      172    GUID= {E1A43F20-297C-11E6-8001-444553540000}
      172 Product= Flybycockpits
      172    Manufacturer= Leo Bodnar
      172    Serial Number= B47510
      172    Vendor=16C0, Product=05BA (Version 1.36)
      172    Assigned joystick id 1 (fixed Registry)
      172    GUID= {E1A43F20-297C-11E6-8001-444553540000}
      172 Product= JetMAX 737 Throttle
      172    Manufacturer= TEKWorx Limited
      172    Serial Number= 000001F7
      172    Vendor=1FD1, Product=0600 (Version 1.2)
      172    Assigned joystick id 2 (fixed Registry)
      172    GUID= {A9095060-D445-11E5-8011-444553540000}
      172 -------------------------------------------------------------------
      187 LogOptions=00000000 00000001
      187 -------------------------------------------------------------------
      187 ------ Setting the hooks and direct calls into the simulator ------
      187 --- CONTROLS timer memory location obtained ok
      187 --- SIM1 Frictions access gained
      187 --- FS Controls Table located ok
      187 --- Installed Mouse Macro hooks ok.
      187 --- Wind smoothing fix is installed
      187 --- SimConnect intercept for texts and menus option is off
      187 --- All links okay (except older global weather setting method)
      187 -------------------------------------------------------------------
      187 SimConnect_Open succeeded: waiting to check version okay
      187 Trying to use SimConnect Prepar3D
      187 Opened separate AI Traffic client okay
    34976 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.18.19475 (SimConnect: 3.4.0.0)
    34976 Initialising SimConnect data requests now
    34976 FSUIPC Menu entry added
    34991 ... Using Prepar3D with Academic License
    35007 \\VERNON-PC\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml
    35007 \\VERNON-PC\P3D\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air
    66940 \\VERNON-PC\P3D\SimObjects\Airplanes\Prosim 737-800 Regular\Prosim738.air
   139840 Aircraft loaded: running normally now ...
   139840 User Aircraft ID 1 supplied, now being used
   140245 System time = 13/10/2017 12:32:25, Simulator time = 12:30:41 (11:30Z)
   140245 Aircraft="Prosim_737_800_Winglets_Ryanair 800W"
   153240 Starting everything now ...
   153271 ASN active function link set
   153271 Ready for ASN WX radar
   156750 Advanced Weather Interface Enabled
   160712 Sim stopped: average frame rate for last 21 secs = 30.0 fps
   160712    Max AI traffic was 0 aircraft
 

[Driver170]

12 hours ago, Pete Dowson said:

I need the log and the INI file, and the joyscan CSV file. And make sure you are using a currently supported version (of FSUIPC -- 4.971 for P3D3).

Does P3D3 see those devices?

I cannot help with virtually zero information. Sorry.

Do

supply a driver? if the device(s) are normal jotstick type devices you probably shouldn't be using it if so.

I see you are the person who posted another thread here just rudely saying "bump"? Please do not do such things. It wont be taken kindly. if it was meant to attract faster attention, it didn't work. You only started this thread 3 hours ago! How fast do you expect a response? With most support sites you'd be lucky to get one the same day. I only caught it now because i tend to do a quick scan befor going to bed -- it is gone midnight here!

And I won't be around much tomorrow. Many other things to attend to!

Pete

 

 Hi pete i cant find the joyscan CSV file?

Yeh both my yokes and pedals for my cockpit are plug n play and you configure it in windows

I also just updated FSUIPC

[Driver170]

FSUIPC4.JoyScan.csv

[Driver170]

Hi pete i started a new FSUIPC which done the trick :)

But only 1 problem. I've assigned a profile called PS (prosim) my both yokes and rudder pedals are under this profile but my problem is the brakes, my captain side is ticked for reverse in FSUIPC but this has the opposite effect on my First officer brakes which are then stuck on? Any ideas?

[Pete Dowson]

Your logs all relate to an old version of FSUIPC, 4.965, which I really cannot support. Please, before posting ANY support request, do check that you are using an up-to-date supported version.  At present the earliest supported version is 4.971.

See the Download Links subforum,  Updated Modules thread for details.

Then, assuming you update:

4 hours ago, Driver170 said:

I've assigned a profile called PS (prosim) my both yokes and rudder pedals are under this profile but my problem is the brakes, my captain side is ticked for reverse in FSUIPC but this has the opposite effect on my First officer brakes which are then stuck on? Any ideas?

Again, with no information I cannot possibly forulate a useful "idea". At least the INI file is needed.

Pete

 

[Driver170]

FSUIPC4.ini

[Driver170]

Problem i'm having using dual yoke and pedals, is when i come to set the min and max ranges! Each of my hardware has different ranges

[Pete Dowson]

7 hours ago, Driver170 said:

've assigned a profile called PS (prosim) my both yokes and rudder pedals are under this profile but my problem is the brakes, my captain side is ticked for reverse in FSUIPC but this has the opposite effect on my First officer brakes which are then stuck on?

The INI shows only one set of brakes: 

9=CU,256,D,7,0,0,0    -{ DIRECT: LeftBrake }-
10=CV,256,D,8,0,0,0    -{ DIRECT: RightBrake }-

So where are your "First Officer" brakes asigned?

2 hours ago, Driver170 said:

Problem i'm having using dual yoke and pedals, is when i come to set the min and max ranges! Each of my hardware has different ranges

You need similar or identical hardware for good dual controls. Otherwise you'll either need to settle for the best compromise between the two OR do some manipulation of the ranges in the assignment lines, using airthmetic, before calibration.  See "Additional parameters to scale input axis values" on page 46 of the Advanced User's manual.

Anyway, you only have one set of pedals assigned. two yokes however.

Why are you submitting a different problem now and then, one at a time? Does a subsequent one replace all previous ones?

Pete

 

[Driver170]

Hi pete i got help from someone on Prosim.

Basically my Rudder pedals are dual linked so i only assigned Captain rudder but only brakes for the FO.

I also assigned the FO yoke through P3D controls