VANANTWERPEN Posted March 12, 2018 Report Share Posted March 12, 2018 Hi peter, it's very difficult to explain my issues. so i begin.. i have decided to change my visual computer (MASTER) to have P3D V4.1, buy fsuipc5 and use my fsx wideserver licence. my cockpit have 7 computers: one big (before fs2004) and 6 with full Project Magenta software. (before all work normally) with fsuipc3 and wideclient 6.999xx. after make change on 6 clients computer with wideclient 7.14, the system seem to run normaly. But after 4 hours to test and set différents parameters (no in wideclient) the PM software run slowly and finish to not working. after plenty of seach and test we have see that all wideclient log execed 1 or 2 Giga octets!! after autostarting each pm soft we have ###### ERROR: Data Requests Overflow! on rest of log file. we have tested with just one client power on and just one apply (pmsound , then pminstructor, then fsinterrogate2std) always the same (gust of ###### ERROR: Data Requests Overflow! ). in despair of out I tested my old client wideclient for fs2004 all seems ok we have no more error. strange !????? also we have had some stranges impossibility to have fsuipc screen on P3D. i am able to give you all file you want, some are joined here. best regards gilles ********* WideClient Log [version 7.14] Class=FS98MAIN ********* Date (dmy): 11/03/18, Time 16:40:04.838: Client name is INSTRUCTEUR-PC 46 LUA: "D:\wideclient\Initial.LUA": not found 124 Attempting to connect now 124 Trying to locate server: Need details from Server Broadcast 124 Failed to connect: waiting to try again 1185 Attempting to connect now 23462 Trying to locate server: Need details from Server Broadcast 74381 Server = MASTER 74396 Trying TCP/IP host "MASTER" port 8002 ... 74396 ... Okay, IP Address = 172.16.43.220 74396 Connection made okay! 74911 d:\pmsystems 74911 D:\pmSystems\pmSystems.exe 75223 d:\pmgetweather 75223 D:\pmgetweather\pmGetWeather.exe 77329 New Client Application: "pmGetWeather" (Id=3956) 83585 New Client Application: "pmsystems" (Id=168) 116345 ###### ERROR: Data Requests Overflow! 116345 ###### ERROR: Data Requests Overflow! 116345 ###### ERROR: Data Requests Overflow! 116345 ###### ERROR: Data Requests Overflow! 116345 ###### ERROR: Data Requests Overflow! 116345 ###### ERROR: Data Requests Overflow! 116345 ###### ERROR: Data Requests Overflow! 116345 ###### ERROR: Data Requests Overflow! 116345 ###### ERROR: Data Requests Overflow! 116345 ###### ERROR: Data Requests Overflow! 116345 ###### ERROR: Data Requests Overflow! WideClient.ini FSUIPC5.log WideServer.log Link to comment Share on other sites More sharing options...
Pete Dowson Posted March 12, 2018 Report Share Posted March 12, 2018 29 minutes ago, VANANTWERPEN said: after plenty of seach and test we have see that all wideclient log execed 1 or 2 Giga octets!! Strange. I have a 7 PC system too, linked by WideFS. 29 minutes ago, VANANTWERPEN said: after autostarting each pm soft we have ###### ERROR: Data Requests Overflow! on rest of log file. Are they the errors filling up your very large files? 29 minutes ago, VANANTWERPEN said: i am able to give you all file you want, some are joined here. The WideServer.LOG you attached is no good -- all the connections are to wideClient 6.999. I need to see the one relating to the problem session. Pete Link to comment Share on other sites More sharing options...
VANANTWERPEN Posted March 12, 2018 Author Report Share Posted March 12, 2018 pete thanks, -yes all clients have same issues, ###### ERROR: Data Requests Overflow! plenty of lines just these lines after the firsts lines of connexion and launch pm apply. i'm happy to have the backup 0.log !! send i 'm not near my cockpit (40 km) my wife don't want a cockpit in the living room! gilles WideServer0.log Link to comment Share on other sites More sharing options...
VANANTWERPEN Posted March 12, 2018 Author Report Share Posted March 12, 2018 pete for information. pc Master have 2 network card. one for internet, one for local fsnetwork 6 clients 1 pc instrum also 2 pc spare also 3-4-5-6 pc (efis 1-2-3 and instrum) only one network card. may be bad acces but ok with old client (witch have master adr write in ini file) my config network joined sorry too big, so in my google drive https://drive.google.com/open?id=1H6D7eF6An87P6oKaKsts1-kPgcZtUdy gilles Link to comment Share on other sites More sharing options...
Pete Dowson Posted March 12, 2018 Report Share Posted March 12, 2018 1 hour ago, VANANTWERPEN said: -yes all clients have same issues, ###### ERROR: Data Requests Overflow! plenty of lines just these lines after the firsts lines of connexion and launch pm apply. I'll look into this in the morning. I have some ideas but I need to set things up to try something. I was about to release another Wideclient update with other improvements in any case (for the ext library in Lua plug-ins), so I'll try to attend to both together. Can you say how longit takes before you get the errors (the first error line in WideClient will tell you, e,g, 83585 New Client Application: "pmsystems" (Id=168) 116345 ###### ERROR: Data Requests Overflow! in the log fragment you showed me. So 116345 - 83585 = 32760, or a little under 33 seconds, are they all about the same? Pete Pete Link to comment Share on other sites More sharing options...
VANANTWERPEN Posted March 12, 2018 Author Report Share Posted March 12, 2018 pete i must leave my home now... i mail you back tomorrow thanks gilles Link to comment Share on other sites More sharing options...
Pete Dowson Posted March 12, 2018 Report Share Posted March 12, 2018 I've made a change already which may help, but I won't have time to test till tomorrow. If youcould test it for me, when you can, and let me know, downlaod it: http://fsuipc.simflight.com/beta/WideClient714a_TEST.zip Leave it running for a while if possible, please. Thanks, Pete Link to comment Share on other sites More sharing options...
Pete Dowson Posted March 13, 2018 Report Share Posted March 13, 2018 Version 7.141 of WideClient is now released. Please use that. Let me know if there are stil problems. Pete Link to comment Share on other sites More sharing options...
VANANTWERPEN Posted March 15, 2018 Author Report Share Posted March 15, 2018 hello Pete, I went to the simulator yesterday late afternoon. (I didn't have much time. ) I changed all clients on 6 PCs, used the TCP protocol and master's fixed IP address on ini file .Everything seems to work, no errors as indicated in object reported in logs file. so I'll be doing tests on Friday night on a longer usage time. Thank you a thousand times for your reactivity and the efficiency of your work. If you wish to have specific files, please let me know. best regards Gilles from bordeaux Link to comment Share on other sites More sharing options...
VANANTWERPEN Posted March 18, 2018 Author Report Share Posted March 18, 2018 Hello Pete, as I promised, I'm reporting back to you on my tests over a longer period of time. everything seems to be working, we have no more mistakes. thanks again. gilles. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now