Blaunarwal Posted April 10, 2019 Report Posted April 10, 2019 Hi Pete Since updating Prepar3D to 4.5 I can not connect Airport Design Editor X (Application 01.76.6715.14291, Engine 04.75.6712.18978) to it. I get the FSUIPC error #8, FSUIPC_ERR_WRONGFS. Incorrect Version of Flightsim. I use FSUIPC 5.151. The latter seems to work fine in 4.5 so I wonder, why does it not connect with ADEX. Is there a workaround or do we need to wait for an updated FSUIPC? Regards Dan
srcooke Posted April 10, 2019 Report Posted April 10, 2019 Using ADE v01.77.6986.18569 and FSUIPC 1.151 and connecting to P3Dv4.5 without issue. Did you install the new P3Dv4 SDK and correct the file paths in ADE.
Pete Dowson Posted April 10, 2019 Report Posted April 10, 2019 4 hours ago, Blaunarwal said: Since updating Prepar3D to 4.5 I can not connect Airport Design Editor X (Application 01.76.6715.14291, Engine 04.75.6712.18978) to it. I get the FSUIPC error #8, FSUIPC_ERR_WRONGFS. Incorrect Version of Flightsim. I use FSUIPC 5.151. The latter seems to work fine in 4.5 so I wonder, why does it not connect with ADEX. Is there a workaround or do we need to wait for an updated FSUIPC? It's ADE which has to connect with FSUIPC, not the other way around. And it is ADE reporting the error. I'm using the exact same ADE version and it connects okay (I have !autoconnect" checked in ADE, so it connects straight away). I just ran it again.with IPC read logging enabled. here are the relevant parts of the log: ********* FSUIPC5, Version 5.151 (20th March 2019) by Pete Dowson ********* Running inside Prepar3D v4 Module base=7FEADCE0000 Windows 7 Ultimate 64 Bit with SP 1.0 reported as Build 7601 (OS 6.1) Prepar3D.exe version = 4.5.11.29713 Reading options from "E:\Prepar3D v4\Modules\FSUIPC5.ini" ... 555161 READ0[10228] 3304, 4 bytes: 00 00 51 51 ..QQ 555161 READ0[10228] 3308, 4 bytes: 0C 00 DE FA .... That's reading the FSUIPC version and the P3D version (the "0C" at 3308 would mean P3D4). the "DE FA" is just a validity check on these 8 bytes. ADE isn't reading the specific version details in offset 3124 which would give and then this sequence repeated every 100 mSecs or so: 555255 READ0[10228] 0020, 4 bytes: 48 19 00 00 H... 555255 READ0[10228] 0560, 8 bytes: F8 FF FE 9F B2 47 57 00 .....GW. 555255 READ0[10228] 0568, 8 bytes: 08 00 C7 6B 65 8E A7 FF ...ke... 555255 READ0[10228] 0570, 8 bytes: 00 00 3F 3A 1C 00 00 00 ..?:.... 555255 READ0[10228] 0580, 4 bytes: BB 3B 82 BF .;.. 555255 READ0[10228] 3210, 224 bytes: BE 00 00 00 4F 00 00 00 4D 00 00 00 00 00 00 00 ....O...M....... 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 555255 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ which is reading ground altitude, aircraft location, altitude and heading, plus the Hot Key list, where is seems to have set 3 hot keys -- the .> key, the letter O and M. Not sure if those are options I set long ago and forgot or are defaults. Pete
Pete Dowson Posted April 10, 2019 Report Posted April 10, 2019 10 minutes ago, srcooke said: Using ADE v01.77.6986.18569 and FSUIPC 1.151 and connecting to P3Dv4.5 without issue. 1.77? My 1.76 says it's up to date when I ask it to check for updates! Pete
srcooke Posted April 10, 2019 Report Posted April 10, 2019 26 minutes ago, Pete Dowson said: 1.77? My 1.76 says it's up to date when I ask it to check for updates! It is a beta update available from the forum Pete.
Blaunarwal Posted April 10, 2019 Author Report Posted April 10, 2019 11 hours ago, srcooke said: Using ADE v01.77.6986.18569 and FSUIPC 1.151 and connecting to P3Dv4.5 without issue. Did you install the new P3Dv4 SDK and correct the file paths in ADE. Yes, together with 4.5 i also installed the new SDK. Therefore, ADE lost all paths and I configured this new.
Blaunarwal Posted April 10, 2019 Author Report Posted April 10, 2019 Hi Pete I could connect now ADE again. Don´t know, what caused this. Thirst thought, I may have chosen FSX as ADE sim. But I checked now, this can´t be. With the wrong sim, it does not allow to connect at all. The button is inactive. What I did after reading the messages here, was just to save the paths again (unaltered), leaving ADE again and starting it new. Then I could just connect, like before. So problem is solved for me. The error message I had suggested, FSUIPC is not allowing the new sim version. Although ADE connects with the sim, as you explained, the message said, it´s an FSUIPC error - strange. Regards Dan
Pete Dowson Posted April 10, 2019 Report Posted April 10, 2019 32 minutes ago, Blaunarwal said: Although ADE connects with the sim, as you explained, the message said, it´s an FSUIPC error - strange. It's only an "FSUIPC error" only to the extent that if the application asks for, say, and FSX connection, and FSUIPC is running in P3D, then that error is returned by the code supplied to programmers to show how to interface to FSUIPC. But as far as I can determine (without ADE's code), it doesn't. -- It connects asking for "any FS", in which case this error cannot be returned. And it is fine with me and with srcooke. But you need to check with ScruffyDuck on this. I'm not hacking their code (that's actually here the check is being made --it happens in the ADE process AFTER the FS Version number is returned to it in the way I described above, with the Log. (Did you try logging to compare your results?). Pete
Blaunarwal Posted April 11, 2019 Author Report Posted April 11, 2019 That´s my previous log. I can´t see something in it, maybe you. The actual log is below this. ********* FSUIPC5, Version 5.15 (27th November 2018) by Pete Dowson ********* Running inside Prepar3D v4 Module base=7FF864C30000 Windows 10 Home 64 Bit reported as Build 17763, Release ID: 1809 (OS 10.0) Prepar3D.exe version = 4.5.11.29713 Reading options from "D:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.ini" Checking the Registrations now ... User Name="Daniel Mrawek" User Addr="blaunarwal@yahoo.de" FSUIPC5 Key is provided WIDEFS7 not user registered, or expired 0 System time = 09/04/2019 18:12:08 0 FLT path = "D:\Users\Daniel\Dokumente\Prepar3D v4 Files\" 0 Using DialogMode 16 FS path = "D:\Program Files\Lockheed Martin\Prepar3D v4\" 16 ---------------------- Joystick Device Scan ----------------------- 16 Product= X52 Professional H.O.T.A.S. 16 Manufacturer= Logitech 16 Vendor=06A3, Product=0762 (Version 32.0) 31 GUIDs returned for product: VID_06A3&PID_0762: 31 GUID= {3D9F49E0-02BB-11E9-8001-444553540000} 31 Details: Btns=39, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R255,U255,V1023,X1023,Y1023,Z255 31 ------------------------------------------------------------------- 47 Device acquired for use: 47 Joystick ID = 0 (Registry okay) 47 0=X52 Professional H.O.T.A.S. 47 0.GUID={3D9F49E0-02BB-11E9-8001-444553540000} 47 ------------------------------------------------------------------- 63 Run: "D:\Program Files\SPAD.neXt\SPAD.neXt.exe" 563 LogOptions=00000000 00000001 563 ------------------------------------------------------------------- 563 SimConnect_Open succeeded: waiting to check version okay 563 Opened separate AI Traffic client okay 563 ### PDKmodeHelper callback registered! 358438 Running in "Lockheed Martin® Prepar3D® v4", Version: 4.5.11.29713 (SimConnect: 4.5.0.0) 358453 Initialising SimConnect data requests now 358453 FSUIPC Menu entry added 358453 ... Using Prepar3D with Academic License 358469 D:\Users\Daniel\Dokumente\Prepar3D v4 Files\Malta A320.fxml 358469 D:\Users\Daniel\Dokumente\Prepar3D v4 Files\IFR Francisco Sa Carneiro to Lisbon.pln 358469 D:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\BlackBox Airbus A320\BB_A320_CFM.air 358485 D:\Users\Daniel\Dokumente\Prepar3D v4 Files\IFR Francisco Sa Carneiro to Lisbon.pln 632203 ### The user object is 'Airbus A320-214 CFM AIRMALTA' 632203 ### Mode is NORMAL 632391 ### Mode: PAUSE on 703375 Loading Complete ... 703422 ### Mode is NORMAL 704453 Aircraft loaded: running normally now ... 704531 User Aircraft ID 2 supplied, now being used 705078 System time = 09/04/2019 18:23:53, Simulator time = 12:22:36 (11:22Z) 705078 Aircraft="Airbus A320-214 CFM AIRMALTA" 711078 -------------------- Starting everything now ---------------------- 711094 ASN active function link set 711094 Ready for ActiveSky WX radar with additional data 712266 Advanced Weather Interface Enabled 733016 Weather Mode now = Theme 733016 Weather Mode now = Custom 1338188 Weather Mode now = Theme 1338188 Weather Mode now = Custom 1942985 Weather Mode now = Theme 1942985 Weather Mode now = Custom 2547797 Weather Mode now = Theme 2547797 Weather Mode now = Custom 2673703 Sim stopped: average frame rate for last 1969 secs = 30.0 fps 2673703 Max AI traffic was 16 aircraft (Deleted 0) 2781094 **** Restarting traffic scanning due to non-reception **** 3153078 Weather Mode now = Theme 3153078 Weather Mode now = Custom 3757735 Weather Mode now = Theme 3757735 Weather Mode now = Custom 4133531 Sim stopped: average frame rate for last 1353 secs = 30.0 fps 4133531 Max AI traffic was 20 aircraft (Deleted 0) 4197500 **** Restarting traffic scanning due to non-reception **** 4362547 Weather Mode now = Theme 4362547 Weather Mode now = Custom 4536281 Weather Mode now = Theme 4536281 Weather Mode now = Custom 5140719 Weather Mode now = Theme 5140719 Weather Mode now = Custom 5744922 Weather Mode now = Theme 5744922 Weather Mode now = Custom 6349516 Weather Mode now = Theme 6349516 Weather Mode now = Custom 6953703 Weather Mode now = Theme 6953703 Weather Mode now = Custom 7557641 Weather Mode now = Theme 7557641 Weather Mode now = Custom 8161406 Weather Mode now = Theme 8161406 Weather Mode now = Custom 8765875 Weather Mode now = Theme 8765875 Weather Mode now = Custom 9370219 Weather Mode now = Theme 9370219 Weather Mode now = Custom 9974235 Weather Mode now = Theme 9974235 Weather Mode now = Custom 10578016 Weather Mode now = Theme 10578016 Weather Mode now = Custom 11181688 Weather Mode now = Theme 11181688 Weather Mode now = Custom 11785906 Weather Mode now = Theme 11785906 Weather Mode now = Custom 12390141 Weather Mode now = Theme 12390141 Weather Mode now = Custom 12994110 Weather Mode now = Theme 12994110 Weather Mode now = Custom 13598125 Weather Mode now = Theme 13598125 Weather Mode now = Custom 14097625 Sim stopped: average frame rate for last 9900 secs = 29.5 fps 14097625 Max AI traffic was 20 aircraft (Deleted 0) 14116281 **** Restarting traffic scanning due to non-reception **** 14202500 Weather Mode now = Theme 14202500 Weather Mode now = Custom 45640672 **** Restarting traffic scanning due to non-reception **** 45666078 Weather Mode now = Theme 45666078 Weather Mode now = Custom 46271453 Weather Mode now = Theme 46271453 Weather Mode now = Custom 46798141 Sim stopped: average frame rate for last 32682 secs = 29.7 fps 46798141 Max AI traffic was 20 aircraft (Deleted 0) 46819000 **** Restarting traffic scanning due to non-reception **** 46879844 Weather Mode now = Theme 46879844 Weather Mode now = Custom 47019797 Sim stopped: average frame rate for last 201 secs = 29.9 fps 47019797 Max AI traffic was 20 aircraft (Deleted 0) 47020985 === Closing session: waiting for DLLStop to be called ... 47035063 === DLLStop called ... 47035063 === Closing external processes we started ... 47036063 === About to kill any Lua plug-ins still running ... 47036219 === Closing global Lua thread 47037235 === About to kill my timers ... 47037438 === Restoring window procs ... 47037438 === Unloading libraries ... 47037438 === stopping other threads ... 47037438 === ... Button scanning ... 47037531 === ... Axis scanning ... 47037641 === Releasing joystick devices ... 47037641 === Freeing macro memory 47037641 === Removing any offset overrides 47037641 === Clearing any displays left 47037641 === NOTE: not calling SimConnect_Close ... 47037641 === AI slots deleted! 47037641 === Freeing button memory ... 47037641 === Deleting wxstationlist.bin file ... 47037641 === Closing my Windows ... 47037641 === Freeing FS libraries ... 47038641 === Closing devices ... 47038641 === Closing the Log ... Bye Bye! ... 47038641 System time = 10/04/2019 07:16:06, Simulator time = 16:28:03 (15:28Z) 47038641 *** FSUIPC log file being closed Minimum frame rate was 19.4 fps, Maximum was 30.2 fps Average frame rate for running time of 46105 secs = 29.7 fps Maximum AI traffic for session was 20 aircraft Memory managed: 7160 Allocs, 7159 Freed ********* FSUIPC Log file closed *********** ********* FSUIPC5, Version 5.151 (21st February 2019) by Pete Dowson ********* Running inside Prepar3D v4 Module base=7FF870FC0000 Windows 10 Home 64 Bit reported as Build 17763, Release ID: 1809 (OS 10.0) Prepar3D.exe version = 4.5.11.29713 Reading options from "D:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.ini" Checking the Registrations now ... User Name="Daniel Mrawek" User Addr="blaunarwal@yahoo.de" FSUIPC5 Key is provided WIDEFS7 not user registered, or expired 0 System time = 10/04/2019 07:22:16 0 FLT path = "D:\Users\Daniel\Dokumente\Prepar3D v4 Files\" 0 Using DialogMode 0 FS path = "D:\Program Files\Lockheed Martin\Prepar3D v4\" 15 ---------------------- Joystick Device Scan ----------------------- 15 Product= X52 Professional H.O.T.A.S. 15 Manufacturer= Logitech 15 Vendor=06A3, Product=0762 (Version 32.0) 15 GUIDs returned for product: VID_06A3&PID_0762: 15 GUID= {3D9F49E0-02BB-11E9-8001-444553540000} 15 Details: Btns=39, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R255,U255,V1023,X1023,Y1023,Z255 15 ------------------------------------------------------------------- 31 Device acquired for use: 31 Joystick ID = 0 (Registry okay) 31 0=X52 Professional H.O.T.A.S. 31 0.GUID={3D9F49E0-02BB-11E9-8001-444553540000} 31 ------------------------------------------------------------------- 47 Run: "D:\Program Files\SPAD.neXt\SPAD.neXt.exe" 515 LogOptions=00000000 00000001 515 ------------------------------------------------------------------- 515 SimConnect_Open succeeded: waiting to check version okay 515 Opened separate AI Traffic client okay 515 ### PDKmodeHelper callback registered 350312 Running in "Lockheed Martin® Prepar3D® v4", Version: 4.5.11.29713 (SimConnect: 4.5.0.0) 350312 Initialising SimConnect data requests now 350312 FSUIPC Menu entry added 350328 ... Using Prepar3D with Academic License 350343 D:\Users\Daniel\Dokumente\Prepar3D v4 Files\Malta A320.fxml 350343 D:\Users\Daniel\Dokumente\Prepar3D v4 Files\IFR Francisco Sa Carneiro to Lisbon.pln 350343 D:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\BlackBox Airbus A320\BB_A320_CFM.air 350359 D:\Users\Daniel\Dokumente\Prepar3D v4 Files\IFR Francisco Sa Carneiro to Lisbon.pln 591093 ### The user object is 'Airbus A320-214 CFM AIRMALTA' 591093 ### Mode is NORMAL 591890 ### Mode: PAUSE on 656750 Loading Complete ... 656781 ### Mode is NORMAL 657828 Aircraft loaded: running normally now ... 657922 User Aircraft ID 2 supplied, now being used 658484 System time = 10/04/2019 07:33:15, Simulator time = 14:00:44 (13:00Z) 658500 Aircraft="Airbus A320-214 CFM AIRMALTA" 664468 -------------------- Starting everything now ---------------------- 664515 ASN active function link set 664515 Ready for ActiveSky WX radar with additional data 665672 Advanced Weather Interface Enabled 943906 Sim stopped: average frame rate for last 286 secs = 29.9 fps 943906 Max AI traffic was 18 aircraft (Deleted 0) 943906 ------------------------------------------------------------------- 1082484 **** Restarting traffic scanning due to non-reception **** 58211968 Sim stopped: average frame rate for last 57129 secs = 24.0 fps 58211968 Max AI traffic was 20 aircraft (Deleted 0) 58211968 ------------------------------------------------------------------- 58213265 === Closing session: waiting for DLLStop to be called ... 58222750 === DLLStop called ... 58222750 === Closing external processes we started ... 58223750 === About to kill any Lua plug-ins still running ... 58223906 === Closing global Lua thread 58224922 === About to kill my timers ... 58225125 === Restoring window procs ... 58225125 === Unloading libraries ... 58225125 === stopping other threads ... 58225125 === ... Button scanning ... 58225218 === ... Axis scanning ... 58225312 === Releasing joystick devices ... 58225312 === Freeing macro memory 58225312 === Removing any offset overrides 58225312 === Clearing any displays left 58225312 === NOTE: not calling SimConnect_Close ... 58225312 === AI slots deleted! 58225312 === Freeing button memory ... 58225312 === Deleting wxstationlist.bin file ... 58225312 === Closing my Windows ... 58225312 === Freeing FS libraries ... 58226328 === Closing devices ... 58226328 === Closing the Log ... Bye Bye! ... 58226328 System time = 10/04/2019 23:32:43, Simulator time = 03:16:23 (02:16Z) 58226328 *** FSUIPC log file being closed Minimum frame rate was 19.1 fps, Maximum was 31.2 fps Average frame rate for running time of 57415 secs = 24.1 fps Maximum AI traffic for session was 20 aircraft Memory managed: 21237 Allocs, 21236 Freed ********* FSUIPC Log file closed ***********
Pete Dowson Posted April 11, 2019 Report Posted April 11, 2019 1 hour ago, Blaunarwal said: That´s my previous log. I can´t see something in it, maybe you. The actual log is below this. You need to enable "ipc Read" logging in the Logging tab, as I said. Else it won't show anything relevant to any application connection! Then just compare what the read lines show to what I posted earlier. Pete
Blaunarwal Posted April 11, 2019 Author Report Posted April 11, 2019 4 hours ago, Pete Dowson said: You need to enable "ipc Read" logging in the Logging tab, as I said. Else it won't show anything relevant to any application connection! Then just compare what the read lines show to what I posted earlier. Pete Well, that can't be done anymore, since the problem solved itself in the meantime. I gladly never had connection issues with FSUIPC before.
Pete Dowson Posted April 11, 2019 Report Posted April 11, 2019 3 hours ago, Blaunarwal said: Well, that can't be done anymore, since the problem solved itself in the meantime. Oh, good. I evidently misread your post on that. Pete
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now