FSUIPC and HOTAS

[christianbt31]

Is it possible to program the transition in reverse with the joysticks on a HOTAS WARTHOG and if so how to proceed.
Thank you for your help.

 

*** Moved from FAQ to Support Forum: please post support requests in the Support Forum ***

Edited April 24, 2019 by John Dowson
Moved to support forum

[John Dowson]

All axis can be reversed by selecting the 'reverse' check-box in the axis calibration screens. For throttles, there is an option to calibrate with or without reverse zones ('No reverse Zone' tick-box, top-left on throttle calibration page).

Please check the user manuals. Also, this FAQ entry on setting reverse thrust:

John

[christianbt31]

Thank you John,
I am using FSUIPC v 5.1.5.1 and I do not see the same image?
And I only use jets type AIRBUS or BOEING ON P3D v4.5 and I do not understand how to pass in reverse when I'm idling

[John Dowson]

Sorry, those images are specific to CH throttle calibration software. If you want a reverse zone back from idle on the same axis, then you can set that up in the throttle calibration page - just make sure that 'No reverse Zone' is not checked, and set your idle value (as well as Max (full) throttle and reverse (min) values). Check the calibration section starting on page 40 of the User Guide.

John

[christianbt31]

thank you very much, I will try.