Fragtality Posted September 23, 2022 Report Posted September 23, 2022 21 hours ago, John Dowson said: I have released a new beta for SU10, including an updated WASM. Full installer available from: Install FSUIPC7-7.3.9f No Problems with 7.3.9f and recompiled Binaries (with the new FSUIPC_WAPID.dll)! 🙂 If I remember / assume correctly: I won't have to recompile again with a GA Version of 7.3.9? Or should I wait? 4 minutes ago, kingm56 said: Good morning, John. I can confirm the current version of FSUIPC seems to work well with every aircraft, except the FENIX;. I can read the LVARs via 'legacy offset' fine but can't seem to set them via WASM. Interesting enough, the new FSUIPC seems to work just fine with the PMDG and every other aircraft. So, I'm at a complete loss. If there's something I can do to assist, please don't hesitate to ask. Matt You mean generally or in the Context of my Plugin? In case of PilotsDeck: John can't help you with that, but I can 😉
kingm56 Posted September 23, 2022 Report Posted September 23, 2022 9 minutes ago, Fragtality said: No Problems with 7.3.9f and recompiled Binaries (with the new FSUIPC_WAPID.dll)! 🙂 If I remember / assume correctly: I won't have to recompile again with a GA Version of 7.3.9? Or should I wait? You mean generally or in the Context of my Plugin? In case of PilotsDeck: John can't help you with that, but I can 😉 With my own app (FSFO) using Paul's .dll. Were you able to resolve the issue with the Fenix? I would appreciate you advice you have.
John Dowson Posted September 23, 2022 Report Posted September 23, 2022 9 minutes ago, Fragtality said: No Problems with 7.3.9f and recompiled Binaries (with the new FSUIPC_WAPID.dll)! 🙂 Great! 10 minutes ago, Fragtality said: If I remember / assume correctly: I won't have to recompile again with a GA Version of 7.3.9? Or should I wait? That depends if I update again before release...best to wait and recompile on release just in case.
John Dowson Posted September 23, 2022 Report Posted September 23, 2022 2 minutes ago, kingm56 said: With my own app (FSFO) using Paul's .dll. Were you able to resolve the issue with the Fenix? I would appreciate you advice you have. Maybe Paul's dll needs to be rebuilt with the latest WAPI libs (not sure if you need to do this or just drop in the update WAPI lib or dll - ask Paul), or you need to rebuild your software using these. There have been some major changes in how the WAPi works in this release...anything that uses the WAPI will need to be recompiled with the latest libs. John
kingm56 Posted September 23, 2022 Report Posted September 23, 2022 Thanks, John; currently, the WAPID.dll just needs to be in the same directory as Paul's .dll. I guess my struggles are why is the issues relegated to the Fenix. However, that's my problem to solve :). Thank you for the quick release of the version of FSUIPC...LVARs seem to load much smoother.
Fragtality Posted September 23, 2022 Report Posted September 23, 2022 3 minutes ago, kingm56 said: 14 minutes ago, Fragtality said: No Problems with 7.3.9f and recompiled Binaries (with the new FSUIPC_WAPID.dll)! 🙂 If I remember / assume correctly: I won't have to recompile again with a GA Version of 7.3.9? Or should I wait? You mean generally or in the Context of my Plugin? In case of PilotsDeck: John can't help you with that, but I can 😉 With my own app (FSFO) using Paul's .dll. Were you able to resolve the issue with the Fenix? I would appreciate you advice you have. You mean FSFO as in https://flightsimfirstofficer.com/ ? ^^ Then my offer to have a look on the Code is not possible *g* But you can have a look at mine, did not have to change anything for SU10: https://github.com/Fragtality/PilotsDeck/tree/master/PilotsDeck/FSUIPC I'll just dropped in the new FSUIPC_WAPID.dll from 7.3.9f recompiled the Plugin and was good to go 🙂
kingm56 Posted September 23, 2022 Report Posted September 23, 2022 Unfortunately, I'm on a multi-continent business trip and really can't troubleshoot myself...frustrating! The recompile wapid seems to work just fine with every other aircraft, except the Fenix...can't wait to get home and figure this one out.
John Dowson Posted September 23, 2022 Report Posted September 23, 2022 18 minutes ago, kingm56 said: The recompile wapid seems to work just fine with every other aircraft, except the Fenix...can't wait to get home and figure this one out. Ok, then specific to the Fenix... 45 minutes ago, kingm56 said: the WAPID.dll just needs to be in the same directory as Paul's .dll. That is what I thought, but thanks for confirming...I tend to forget these things.... 41 minutes ago, kingm56 said: LVARs seem to load much smoother. Good - should be better in the next release, without the need (or much need...I will still keep it for a while...) of the LvarScanDelay ini parameter.
Fragtality Posted September 23, 2022 Report Posted September 23, 2022 @John Dowson Encountered the Error where the call to ipc.readLvar() Fails (returning nil). When I start a Flight, end it and start a new (same) Flight the Lua Scripts don't work anymore. The Plugin is working though in that Situation! Restarting FSUIPC in that Situation fixes the Problem: the Scripts work again. But then the Connection (C# Client) from my Plugin is not fully working, I can write Lvars but can't read them - still have to investigate if that is on my End or not. Don't know if it is only Fenix related (did not test something else), but the Steps are generally applyable to other ACs: - Lua Script with event.timer trying to read any Lvar of that AC (loaded via [Auto.ACPROFILE] ) - Start a Session with AC - Exit to Main Menu - Start a new Session with AC
John Dowson Posted September 23, 2022 Report Posted September 23, 2022 There is an issue with lvars not being loaded when you restart the same flight that I am looking in at the moment...for now, you could try setting StopWAPIInMenu=No in the [General] section of your FSUIPC7.ini - but I think this also has issues in certain situations... I will post a new release once this is resolved. John
kingm56 Posted September 23, 2022 Report Posted September 23, 2022 John, Have you had a chance to update the WAPID.dll to work with latest WASM build? Im getting an error with C# app when using the latest FSUIPC beta. Hoping you’re just crazy busy and didn’t include the new WAPID.dll in the latest WASM module download zip. The installed WASM version is 0.9.0 while the WAPI is expecting WASM version 0.5.9
filldasbill Posted September 23, 2022 Report Posted September 23, 2022 Hello, I have the same problem like kingm56 and since SU10. I use FSUIPC 7.3.9f and PilotsDeck 0.7.2. I read the LVAR values without any problems, but I cant switch the status with the streamdeck. Can someone help me?
John Dowson Posted September 23, 2022 Report Posted September 23, 2022 27 minutes ago, kingm56 said: Have you had a chance to update the WAPID.dll to work with latest WASM build? Im getting an error with C# app when using the latest FSUIPC beta. Hoping you’re just crazy busy and didn’t include the new WAPID.dll in the latest WASM module download zip. The installed WASM version is 0.9.0 while the WAPI is expecting WASM version 0.5.9 I have not updated the WASM zip file yet as I have still not released this. Currently its available in the latest beta download, in the SDK folder, so you will need to download this to get it for now - or use the attached: FSUIPC_WAPID.dll FSUIPC_WAPID.h
Fragtality Posted September 23, 2022 Report Posted September 23, 2022 52 minutes ago, filldasbill said: Hello, I have the same problem like kingm56 and since SU10. I use FSUIPC 7.3.9f and PilotsDeck 0.7.2. I read the LVAR values without any problems, but I cant switch the status with the streamdeck. Can someone help me? Since it is my Plugin you could ask me directly ;D Try to copy the FSUIPC_WAPID.dll from your FSUIPC7\Utils Folder to the Plugin Folder (%appdata%\Elgato\StreamDeck\Plugins\com.extension.pilotsdeck.sdPlugin) (Stop the Streamdeck Software, copy the file, Start Streamdeck Software) If that does not work, you'll have to wait until I could push the new Version. If you really really can not wait, I could push the current Build?! *g*
kingm56 Posted September 23, 2022 Report Posted September 23, 2022 1 hour ago, John Dowson said: I have not updated the WASM zip file yet as I have still not released this. Currently its available in the latest beta download, in the SDK folder, so you will need to download this to get it for now - or use the attached: FSUIPC_WAPID.dll 105 kB · 0 downloads FSUIPC_WAPID.h 2.87 kB · 0 downloads Thank you, John.
John Dowson Posted September 23, 2022 Report Posted September 23, 2022 Another update: FSUIPC_WAPID.dll I am also now going to release 7.3.9h....done - see Announcements.
Fragtality Posted September 25, 2022 Report Posted September 25, 2022 @bangaroo PilotsDeck 0.7.3 released and the Fenix Integration is also updated! Should work now (with FSUIPC7 7.3.9h installed!) 🙂
bangaroo Posted September 25, 2022 Author Report Posted September 25, 2022 12 hours ago, Fragtality said: @bangaroo PilotsDeck 0.7.3 released and the Fenix Integration is also updated! Should work now (with FSUIPC7 7.3.9h installed!) 🙂 fabulous news, to you and @John Dowsonboth thank you greatly for your help despite my complete ignorance regarding FSUIPC and LVars and so on, will have to test when I get home from this trip but I'm very excited. Have a great week!
John Dowson Posted September 25, 2022 Report Posted September 25, 2022 12 hours ago, Fragtality said: Should work now (with FSUIPC7 7.3.9h installed!) Note that 7.3.9i has now been released, hopefully fixing the axis calibration issues. No change in the WAPI/WAPID though, so PilotsDeck 0.7.3 should still be fine, but I recommend updating to this latest release. I will publish this as the official 7.3.9 tomorrow (probably....!). John
Fragtality Posted September 25, 2022 Report Posted September 25, 2022 9 minutes ago, John Dowson said: Note that 7.3.9i has now been released, hopefully fixing the axis calibration issues. No change in the WAPI/WAPID though, so PilotsDeck 0.7.3 should still be fine, but I recommend updating to this latest release. I will publish this as the official 7.3.9 tomorrow (probably....!). John Thanks John! If it works I'll wait with the Update for the official 7.3.9 Release ^^
filldasbill Posted September 26, 2022 Report Posted September 26, 2022 (edited) Everything work again with FSUIPC 7.3.9 and PilotsDeck 0.7.3. Thank you both for your fantastic support! ❤️ Edited September 26, 2022 by filldasbill
bpieke Posted September 29, 2022 Report Posted September 29, 2022 (edited) Edit: with help from another user, I am making progress, was confused after SU10... Have now assigned axes to specific actions which allows FSUIPC to work again... Edited September 30, 2022 by bpieke
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now