raam123 Posted May 24 Report Posted May 24 I just installed FSUIPC 7.4.12 , flying it with PMDG it seems to stop executing commands during flight ? (FSUIPC keeps running on the background…) Happened to me before takeoff and after landing… I just wonder if it happened to anyone else ?
John Dowson Posted May 24 Report Posted May 24 7 minutes ago, raam123 said: I just installed FSUIPC 7.4.12 , flying it with PMDG it seems to stop executing commands during flight ? (FSUIPC keeps running on the background…) Why do you think it has stopped executing commands? Could it be that the commands are being sent, but they are not having any affect on the aircraft? You could try using FSUIPC's logging facilities and open the logging console - this will tell you what FSUIPC is doing.... 8 minutes ago, raam123 said: Happened to me before takeoff and after landing… What actually happened? Did the sim pause/stutter? Are you using auto-save? Can you attach your FSUIPC7.log and FSUIPC7.ini files and I will take a look, although I doubt that they will show anything... Could you try a flight with the logging console window open and logging for Buttons & Keys and Events activated, and take a look at what is happening when you think that commands are not being executed, and take a note of the timestamp of the last log message, or whenever you think there is an issue. John
raam123 Posted May 24 Author Report Posted May 24 Hi John, I’m aware of the procedure's. I just wondered if it my side or someone had similar issue. I will keep tracking and post the log once able. Thank you for quick replay.
Veefe Posted May 25 Report Posted May 25 21 hours ago, raam123 said: Hi John, I’m aware of the procedure's. I just wondered if it my side or someone had similar issue. I will keep tracking and post the log once able. Thank you for quick replay. Something similar here. After update FSUIPC starts but seems to not load the configs. I have specifc configs for diferent aircrafts and inputs assiged in FSUIPC. I need to exit FSUIPC and open again to my configs load and my inputs work again. Will provide log and .ini files as soon as possible (I will search in the foruns how to do this). Thanks in advance.
John Dowson Posted May 25 Report Posted May 25 48 minutes ago, Veefe said: After update FSUIPC starts but seems to not load the configs. You either haven't given FSUIPC enough time, or the aircraft name does not match the one(s) you have in the [Profike.xxx] section of your profile. Are you using aircraft name substrings? Check your ini, and ALWAYS check your logs before posting. Note that when you first run v7.4.12 it should auto-tune the start-up parameters, but these will not take effect until the next time FSUIPC7 is auto-started. Please see the section on auto-tuning in the Advanced User guide. John
russ2409 Posted May 25 Report Posted May 25 yep got same problem i installed it like i do all updates with out problems but first flight today since installing latest version and have no buttons working. FSUIPC sees the commands in the program but dont send them to the sim. Strange thing is it must of worked before pushback as i started the apu with an assigned button. Just a side note i have 2 friends with same issue since update.
John Dowson Posted May 25 Report Posted May 25 1 hour ago, russ2409 said: FSUIPC sees the commands in the program but dont send them to the sim. How do you know this? Can you please attach a log if you have issues, with logging for Buttons & Keys activated, and maybe also Events.
russ2409 Posted May 25 Report Posted May 25 not at home at the min john but when i flick the buttons on key assignment in fsuipc it has them allocated to do stuff that ive set it up for, however the sim don't seem to actually move the switch when i toggle one of my buttons on the alpha or bravo
Veefe Posted May 26 Report Posted May 26 13 hours ago, John Dowson said: You either haven't given FSUIPC enough time, or the aircraft name does not match the one(s) you have in the [Profike.xxx] section of your profile. Are you using aircraft name substrings? Check your ini, and ALWAYS check your logs before posting. Note that when you first run v7.4.12 it should auto-tune the start-up parameters, but these will not take effect until the next time FSUIPC7 is auto-started. Please see the section on auto-tuning in the Advanced User guide. John Hello John. I checked my .ini but idk what to look for. The aircraft loaded does matches with that I have in my profile.xxx Will provide my .ini and two logs(or what I think what is a log file)attached. Deleted the first lines to not display my email. More specific description of the problem: In the first time I open FSUIPC (auto loaded with MSFS via Steam shortcut in my desktop) the configs are not loaded. If I press a button assigned the button is not displayed in the FSUIPC, its like I never it assigned before. If I exit FSUIPC, starts it again without closing MSFS, now if I presse the same assigned button they are shown in the FSUIP and everythings works fine as before. Will provide my .ini attached. Thank you. FSUIPC7.zip
John Dowson Posted May 26 Report Posted May 26 7 hours ago, Veefe said: In the first time I open FSUIPC (auto loaded with MSFS via Steam shortcut in my desktop) the configs are not loaded. If I press a button assigned the button is not displayed in the FSUIPC, its like I never it assigned before. If I exit FSUIPC, starts it again without closing MSFS, now if I presse the same assigned button they are shown in the FSUIP and everythings works fine as before. It would help if you could activate logging for Buttons & Keys, as asked for. I think you just need to give FSUIPC more time to load and initialise things. You should not attempt to do anything until MSFS and FSUIPC are fully initialised, which in your prev log is here: Quote 241328 -------------------- Starting everything now ---------------------- 246672 Lvars received: 1915 L:vars & 0 H:vars now available 246672 Requesting Input Events... 246672 Lvars/Hvars received - checking aircraft autos.... 246672 **** Empty enumeration of Input Events received - no input events available **** i.e. over 4 minutes after FSUIPC is started. The next time you think things are not loaded/not working, take a look at the log and see if those lines are logged, and if not just wait until they are. You need to be more patient. You can possibly reduce the DetectToConnectDelayAuto ini parameter so that FSUIPC tries to connect earlier, but this value has probably been arrived at via auto-tuning. You can also try activating auto-tuning again, as this parameter can be set too high if auto-tuning was performed when MSFS was updating. See the section on Auto-tuning in the Advanced User guide. 7 hours ago, Veefe said: I checked my .ini but idk what to look for. The aircraft loaded does matches with that I have in my profile.xxx Will provide my .ini and two logs(or what I think what is a log file)attached. Your files also show some device confusion, with devixe with id of 0 being acquired three times: Quote 188 Device acquired for use: 188 Joystick ID = 0 (Registry okay) 203 0=JACsim USB Throttle 203 0.GUID={5B14DF90-CAB5-11EE-8003-444553540000} 203 Device acquired for use: 203 Joystick ID = 0 (Registry okay) 203 0= 203 0.GUID={5B14DF90-CAB5-11EE-8003-444553540000} 203 Device acquired for use: 203 Joystick ID = 1 (Registry okay) 203 1=Saitek Pro Flight Combat Rudder Pedals 203 1.GUID={5B15C9F0-CAB5-11EE-800A-444553540000} 203 Device acquired for use: 203 Joystick ID = 2 (Registry okay) 203 2=SG-EFIS 203 2.GUID={5B168D40-CAB5-11EE-800C-444553540000} 203 Device acquired for use: 203 Joystick ID = 3 (Registry okay) 203 3=Saitek Pro Flight Cessna Yoke 203 3.GUID={5B175090-CAB5-11EE-8016-444553540000} 203 Device acquired for use: 203 Joystick ID = 0 (Registry okay) 203 0= 203 0.GUID={5B14DF90-CAB5-11EE-8003-444553540000} This can be due to phantom xbox controller entries: Quote 188 Product= Controller (XBOX 360 For Windows) 188 Vendor=28DE, Product=11FF (Version 0.0) Are you using such a controller? If not, then please try the attached ini file where I have corrected for this and shortened your aircraft names to use substrings. So please try this, and if any issues please explain and re-attach both your FSUIPC7.ini and FSUIPC7.log files. John FSUIPC7.ini
Komet Posted May 26 Report Posted May 26 I have exactly the same problem. 7.14.09 went without any problems. When I updated, the switches on the Honeycomb Alpha and Bravo no longer work. Something is broken there. Can you download version 7.14.09 somewhere? Markus
John Dowson Posted May 26 Report Posted May 26 8 minutes ago, Komet said: Can you download version 7.14.09 somewhere? No. Older versions are not supported or available. What exactly is your issue? Have you read this post?
Veefe Posted May 26 Report Posted May 26 8 hours ago, John Dowson said: It would help if you could activate logging for Buttons & Keys, as asked for. I think you just need to give FSUIPC more time to load and initialise things. You should not attempt to do anything until MSFS and FSUIPC are fully initialised, which in your prev log is here: i.e. over 4 minutes after FSUIPC is started. The next time you think things are not loaded/not working, take a look at the log and see if those lines are logged, and if not just wait until they are. You need to be more patient. You can possibly reduce the DetectToConnectDelayAuto ini parameter so that FSUIPC tries to connect earlier, but this value has probably been arrived at via auto-tuning. You can also try activating auto-tuning again, as this parameter can be set too high if auto-tuning was performed when MSFS was updating. See the section on Auto-tuning in the Advanced User guide. Your files also show some device confusion, with devixe with id of 0 being acquired three times: This can be due to phantom xbox controller entries: Are you using such a controller? If not, then please try the attached ini file where I have corrected for this and shortened your aircraft names to use substrings. So please try this, and if any issues please explain and re-attach both your FSUIPC7.ini and FSUIPC7.log files. John FSUIPC7.ini 10.75 kB · 1 download Thanks John, will give this .ini a try. and report back. I do not use this controller any more. I read the auto-tunning section but it's not clear to me how I can activate the auto-tunning again. I need to set the StartUpTuningDoneVersion to -1, run and after change again to 1? Thank you very much
Komet Posted May 26 Report Posted May 26 Hello My problem is this. I created a preset for the PMDG 737. In version 7.4.9 everything worked wonderfully. In the new version my preset no longer works. That means if I press a button, for example. He then recognizes this on the yoke. e.g. Taxilight. So everything is good. But when I'm in the simulator and press this button, nothing happens. It seems that FSUIPC is not sending anything to the FS. I can wait 3-4 minutes or restart FSUIPC, unfortunately no success.
John Dowson Posted May 27 Report Posted May 27 12 hours ago, Veefe said: I read the auto-tunning section but it's not clear to me how I can activate the auto-tunning again. I need to set the StartUpTuningDoneVersion to -1, run and after change again to 1? No! I don't understand how you can say/think this if you have read the auto-tuning section... what is not clear about this: Quote You can also completely disable auto-tuning by setting the value of the ini parameter StartUpTuningDoneVersion to a value of -1 – add this to the [General] section of your FSUIPC7.ini file if not there or update the value if this parameter is present, i.e. StartUpTuningDoneVersion=-1 i.e. adding that parameter will completely disable autotuning. To force auto tuning to run: Quote 2. When explicitly instructed to do so, by adding the following ini parameter to the [General] section of your FSUIPC7.ini file: StartUpTuningActive=Yes i.e. just add that!. I am not sure why this is not obvious from the documentation... 7 hours ago, Komet said: My problem is this. I created a preset for the PMDG 737. In version 7.4.9 everything worked wonderfully. In the new version my preset no longer works. That means if I press a button, for example. He then recognizes this on the yoke. e.g. Taxilight. So everything is good. But when I'm in the simulator and press this button, nothing happens. It seems that FSUIPC is not sending anything to the FS. I can wait 3-4 minutes or restart FSUIPC, unfortunately no success. I don't know why I have to say this every time, but I cannot help you if you do not show me your files. I need to see both your FSUIPC7.ini and FSUIPC7.log files, the latter with logging for Buttons & Keys and Events activated. For anyone else that has issues, PLEASE always include these files or I cannot help you - it will be the first thing that I ask for. John
Luigi Martinelli Posted May 27 Report Posted May 27 10 hours ago, Komet said: Hello My problem is this. I created a preset for the PMDG 737. In version 7.4.9 everything worked wonderfully. In the new version my preset no longer works. That means if I press a button, for example. He then recognizes this on the yoke. e.g. Taxilight. So everything is good. But when I'm in the simulator and press this button, nothing happens. It seems that FSUIPC is not sending anything to the FS. I can wait 3-4 minutes or restart FSUIPC, unfortunately no success. I too have the same problem. Is it possible to have the link to the previous version? At least that one didn't have these problems and worked great.
John Dowson Posted May 27 Report Posted May 27 Just now, Luigi Martinelli said: I too have the same problem. Then read this post and show me the required files.... THERE IS NO POINT POSTING FOR THE SAME ISSUE IF YOU ARE NOT GOING TO ATTACH FILES SO THAT I CAN INVESTIGATE 1 minute ago, Luigi Martinelli said: Is it possible to have the link to the previous version? No - I need to see what your issue is with the latest and ONLY supported version. I can provide the previous version, 7.4.11, if absolutely needed, but I need to see what the issue is with the latest version first, and for this I need to see log and ini files as stated.
EisernUnion Posted May 28 Report Posted May 28 Something similar here .... this version drives me really crazy ... i read all stuff in the advanced manual .... but FSUIPC stops working "a bit", especially my LuaScripts Files whatever dont work anymore... they wont restart when i restart FSUIPC to fix it (it worked before, it also worked in the 4.3.12c beta) ... but this new full version is a mysterious thing ... i dont got it. that is how it look like in a working version 236078 [INFO]: Connected to MSFS 263625 -------------------- Starting everything now ---------------------- 274844 Lvars received: 2459 L:vars & 220 H:vars now available 274844 Requesting Input Events... 274844 Lvars/Hvars received - checking aircraft autos.... 274860 Subscribed to InputEvents (30 found) 274907 LUA.1: Pax-String at Offset 0x4510:5:s 274922 LUA.1: Cargo-String at Offset 0x4516:6:s 274938 LUA.1: State-String at Offset 0x451D:16:s 274953 LUA.1: h:\msfs\community\fnx-aircraft-320\simobjects\airplanes\fnx_320_cfm\aircraft.cfg 274969 LUA.1: comparing 'fnx-aircraft-320' with 'h:\msfs\community\fnx-aircraft-320\simobjects\airplanes\fnx_320_cfm\aircraft.cfg 274985 LUA.1: match 275000 LUA.1: GSX_AUTO: Disabling Auto-Services for Fenix A320 275016 LUA.1: comparing '787' with 'h:\msfs\community\fnx-aircraft-320\simobjects\airplanes\fnx_320_cfm\aircraft.cfg 275032 LUA.1: no match 275047 LUA.1: comparing 'FlyByWire' with 'h:\msfs\community\fnx-aircraft-320\simobjects\airplanes\fnx_320_cfm\aircraft.cfg 275063 LUA.1: no match 275078 LUA.1: comparing 'inibuilds-aircraft-a30' with 'h:\msfs\community\fnx-aircraft-320\simobjects\airplanes\fnx_320_cfm\aircraft.cfg 275094 LUA.1: no match 275157 LUA.1: GSX_AUTO - Script active but now its stops right after "Connected to MSFS"... no LUA, no nothing 453 Manually started with DetectToConnectDelay=5, InitialStallTime=5 625 Monitor IPC:5408 (S8) = 0 3250 Simulator detected 8250 Trying to connect... 8281 SimConnect_Open succeeded 8281 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3) 8281 MSFS version = 11.0.282174.999 8281 Initialising SimConnect data requests now 8281 Offset file 'C:\FSUIPC7\myOffsets.txt' not found (info only) 8281 Mapping custom control numbers 69632 - 84232 (maximum defined by ini parameter MaxCustomControlNumber, defaults to 84232 when not present) 8281 Maximum number of custom events available is 1024 (defined by ini parameter MaxNumberOfCustomEvents) 8281 C:\Users\Basti\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\MISSIONS\Custom\CustomFlight\CustomFlight.FLT 8516 User Aircraft ID 1 supplied, now being used (myftm=1) 8516 Requesting user aircraft data... 8516 SimObjects\Airplanes\FNX_320_CFM\aircraft.CFG 8672 Aircraft loaded: running normally now ... 8703 System time = 28/05/2024 13:23:02, Simulator time = 13:22:37 (11:22Z) 8719 Aircraft="FenixA320 Lufthansa D-AIZI" 15313 -------------------- Starting everything now ---------------------- 15313 Starting WAPI.... 15313 [INFO]: **** Starting FSUIPC7 WASM Interface (WAPI) version 1.0.4 (WASM version 1.0.3) using connection -1 15313 [INFO]: Connected to MSFS
John Dowson Posted May 28 Report Posted May 28 9 minutes ago, EisernUnion said: but now its stops right after "Connected to MSFS"... no LUA, no nothing Lua auto scripts are not started until the list of lvars/hvars has been received fromthe WASM module via the WAPI, here: Quote 274844 Lvars received: 2459 L:vars & 220 H:vars now available 274844 Requesting Input Events... 274844 Lvars/Hvars received - checking aircraft autos.... Is nothing logged after the '[INFO]: Connected to MSFS' message, even if/when you keep FSUIPC7 running? Can you test again, and if your lua's don't start, exit FSUIPC7 and then attach your FSUIPC7.log file as well as your FSUIPC_WASM.log file (see Advanced User guide, WASM section, if you do not know where this log file is). Maybe also attach your InstallFSUPC7.log file so that I can check the WASM was installed correctly. As you are a new user to this forum, your upload file limit will be very low - it will increase the more you post. Try compressing the files before attaching, but if still too large you can paste the contents instead (but please paste the whole file, not an extract). John.
EisernUnion Posted May 28 Report Posted May 28 (edited) FSUIPC_WASM_prev.log The wasm_.log stopped logging at 09:12 UTC today .... since then... nothing Tue May 28 05:35:59 2024 [ALWAYS]: <=============================== START OF PROGRAM ===============================> Tue May 28 05:35:59 2024 [ALWAYS]: **** WASM version is 1.0.3 **** Tue May 28 05:35:59 2024 [INFO]: Ini file loaded from add-on package Tue May 28 05:35:59 2024 [INFO]: No ini file found in persistant storage at '\work\FSUIPC_WASM.ini' Tue May 28 05:35:59 2024 [ALWAYS]: lvarUpdateFrequency = 4 Tue May 28 05:35:59 2024 [ALWAYS]: lvarScanDelay = 5 Tue May 28 05:35:59 2024 [ALWAYS]: lvarScanFrequency = -2 Tue May 28 05:35:59 2024 [ALWAYS]: useAirLocForHvars = 0 Tue May 28 05:35:59 2024 [ALWAYS]: Maximum number of lvars/hvars per Client Data Area is 146 Tue May 28 05:35:59 2024 [INFO]: Config Client Data Area mapped to ID 1 Tue May 28 05:35:59 2024 [INFO]: Data Definition 1 added for Config Client Data Area definition Tue May 28 05:35:59 2024 [INFO]: Config Client Data Area created. Tue May 28 05:35:59 2024 [INFO]: Lvar Value Client Data Area mapped to ID 2 Tue May 28 05:35:59 2024 [INFO]: Data Definition 2 added for Lvar Set Request Client Data Area definition Tue May 28 05:35:59 2024 [INFO]: Lvar Value Client Data Area created. Tue May 28 05:35:59 2024 [INFO]: Calculator Code Client Data Area mapped to ID 3 Tue May 28 05:35:59 2024 [INFO]: Data Definition 3 added for Lvar Set Request Client Data Area definition Tue May 28 05:35:59 2024 [INFO]: Exec Calculator Code Client Data Area created. Tue May 28 05:39:58 2024 [INFO]: Flight loaded: 'flights\other\MainMenu.FLT' Tue May 28 05:42:06 2024 [INFO]: Flight loaded: 'C:\Users\Basti\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\MISSIONS\Custom\CustomFlight\CustomFlight.FLT' Tue May 28 05:42:14 2024 [INFO]: Aircraft loaded: 'h:\msfs\community\fnx-aircraft-320\simobjects\airplanes\fnx_320_cfm\aircraft.cfg' Tue May 28 05:42:55 2024 [INFO]: 220 hvars loaded for aircraft 'FenixA320 Lufthansa D-AIZI' Tue May 28 05:42:55 2024 [INFO]: 2687 LVARS found, created 19 Client Data Areas Tue May 28 05:42:55 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 0 Tue May 28 05:42:55 2024 [INFO]: Lvar values CDA with id=4 mapped to name FSUIPC_lvalues0 [requestId=82] Tue May 28 05:42:55 2024 [INFO]: Lvar values Client data definition 6 added [requestID=83] Tue May 28 05:42:55 2024 [INFO]: Lvar values CDA created with id=4, (size=8192 for 1024 values), mapped to name FSUIPC_lvalues0 [requestId=84] Tue May 28 05:42:55 2024 [INFO]: Lvar values CDA with id=5 mapped to name FSUIPC_lvalues1 [requestId=85] Tue May 28 05:42:55 2024 [INFO]: Lvar values Client data definition 7 added [requestID=86] Tue May 28 05:42:55 2024 [INFO]: Lvar values CDA created with id=5, (size=8192 for 1024 values), mapped to name FSUIPC_lvalues1 [requestId=87] Tue May 28 05:42:55 2024 [INFO]: Lvar values CDA with id=6 mapped to name FSUIPC_lvalues2 [requestId=88] Tue May 28 05:42:55 2024 [INFO]: Lvar values Client data definition 8 added [requestID=89] Tue May 28 05:42:55 2024 [INFO]: Lvar values CDA created with id=6, (size=8192 for 1024 values), mapped to name FSUIPC_lvalues2 [requestId=90] Tue May 28 05:42:55 2024 [INFO]: 2687 lvars loaded for aircraft 'FenixA320 Lufthansa D-AIZI' Tue May 28 05:42:58 2024 [INFO]: 2688 LVARS found, created 19 Client Data Areas Tue May 28 05:42:58 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 05:42:58 2024 [INFO]: 2689 LVARS found, created 19 Client Data Areas Tue May 28 05:42:58 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 05:42:58 2024 [INFO]: 2690 LVARS found, created 19 Client Data Areas Tue May 28 05:42:58 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 05:43:02 2024 [INFO]: New lvars detected: 2700 lvars detected (was 2690): reloading... Tue May 28 05:43:02 2024 [INFO]: 2700 LVARS found, created 19 Client Data Areas Tue May 28 05:43:02 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 05:43:09 2024 [INFO]: New lvars detected: 2702 lvars detected (was 2700): reloading... Tue May 28 05:43:09 2024 [INFO]: 2702 LVARS found, created 19 Client Data Areas Tue May 28 05:43:09 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 05:47:58 2024 [INFO]: New lvars detected: 2706 lvars detected (was 2702): reloading... Tue May 28 05:47:58 2024 [INFO]: 2706 LVARS found, created 19 Client Data Areas Tue May 28 05:47:58 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 05:48:17 2024 [INFO]: New lvars detected: 2715 lvars detected (was 2706): reloading... Tue May 28 05:48:17 2024 [INFO]: 2715 LVARS found, created 19 Client Data Areas Tue May 28 05:48:17 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 05:48:46 2024 [INFO]: New lvars detected: 2719 lvars detected (was 2715): reloading... Tue May 28 05:48:46 2024 [INFO]: 2719 LVARS found, created 19 Client Data Areas Tue May 28 05:48:46 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 05:54:02 2024 [INFO]: New lvars detected: 2730 lvars detected (was 2719): reloading... Tue May 28 05:54:02 2024 [INFO]: 2730 LVARS found, created 19 Client Data Areas Tue May 28 05:54:02 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 05:56:02 2024 [INFO]: New lvars detected: 2731 lvars detected (was 2730): reloading... Tue May 28 05:56:02 2024 [INFO]: 2731 LVARS found, created 19 Client Data Areas Tue May 28 05:56:02 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:06:33 2024 [INFO]: New lvars detected: 2732 lvars detected (was 2731): reloading... Tue May 28 06:06:33 2024 [INFO]: 2732 LVARS found, created 19 Client Data Areas Tue May 28 06:06:33 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:25:36 2024 [INFO]: New lvars detected: 2733 lvars detected (was 2732): reloading... Tue May 28 06:25:36 2024 [INFO]: 2733 LVARS found, created 19 Client Data Areas Tue May 28 06:25:36 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:25:38 2024 [INFO]: New lvars detected: 2738 lvars detected (was 2733): reloading... Tue May 28 06:25:38 2024 [INFO]: 2738 LVARS found, created 19 Client Data Areas Tue May 28 06:25:38 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:25:52 2024 [INFO]: New lvars detected: 2739 lvars detected (was 2738): reloading... Tue May 28 06:25:52 2024 [INFO]: 2739 LVARS found, created 19 Client Data Areas Tue May 28 06:25:52 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:26:05 2024 [INFO]: New lvars detected: 2740 lvars detected (was 2739): reloading... Tue May 28 06:26:05 2024 [INFO]: 2740 LVARS found, created 19 Client Data Areas Tue May 28 06:26:05 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:26:13 2024 [INFO]: New lvars detected: 2741 lvars detected (was 2740): reloading... Tue May 28 06:26:13 2024 [INFO]: 2741 LVARS found, created 19 Client Data Areas Tue May 28 06:26:13 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:26:32 2024 [INFO]: New lvars detected: 2742 lvars detected (was 2741): reloading... Tue May 28 06:26:32 2024 [INFO]: 2742 LVARS found, created 19 Client Data Areas Tue May 28 06:26:32 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:26:50 2024 [INFO]: New lvars detected: 2743 lvars detected (was 2742): reloading... Tue May 28 06:26:50 2024 [INFO]: 2743 LVARS found, created 19 Client Data Areas Tue May 28 06:26:50 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:32:08 2024 [INFO]: New lvars detected: 2744 lvars detected (was 2743): reloading... Tue May 28 06:32:08 2024 [INFO]: 2744 LVARS found, created 19 Client Data Areas Tue May 28 06:32:08 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:32:17 2024 [INFO]: New lvars detected: 2745 lvars detected (was 2744): reloading... Tue May 28 06:32:17 2024 [INFO]: 2745 LVARS found, created 19 Client Data Areas Tue May 28 06:32:17 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:51:11 2024 [INFO]: New lvars detected: 2746 lvars detected (was 2745): reloading... Tue May 28 06:51:11 2024 [INFO]: 2746 LVARS found, created 19 Client Data Areas Tue May 28 06:51:11 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:55:02 2024 [INFO]: New lvars detected: 2747 lvars detected (was 2746): reloading... Tue May 28 06:55:02 2024 [INFO]: 2747 LVARS found, created 19 Client Data Areas Tue May 28 06:55:02 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:55:18 2024 [INFO]: New lvars detected: 2748 lvars detected (was 2747): reloading... Tue May 28 06:55:18 2024 [INFO]: 2748 LVARS found, created 19 Client Data Areas Tue May 28 06:55:18 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:55:25 2024 [INFO]: New lvars detected: 2749 lvars detected (was 2748): reloading... Tue May 28 06:55:25 2024 [INFO]: 2749 LVARS found, created 19 Client Data Areas Tue May 28 06:55:25 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:55:27 2024 [INFO]: New lvars detected: 2760 lvars detected (was 2749): reloading... Tue May 28 06:55:27 2024 [INFO]: 2760 LVARS found, created 19 Client Data Areas Tue May 28 06:55:27 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:55:50 2024 [INFO]: New lvars detected: 2761 lvars detected (was 2760): reloading... Tue May 28 06:55:50 2024 [INFO]: 2761 LVARS found, created 19 Client Data Areas Tue May 28 06:55:50 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 06:56:07 2024 [INFO]: New lvars detected: 2762 lvars detected (was 2761): reloading... Tue May 28 06:56:07 2024 [INFO]: 2762 LVARS found, created 19 Client Data Areas Tue May 28 06:56:07 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:01:35 2024 [INFO]: New lvars detected: 2763 lvars detected (was 2762): reloading... Tue May 28 07:01:35 2024 [INFO]: 2763 LVARS found, created 19 Client Data Areas Tue May 28 07:01:35 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:01:51 2024 [INFO]: New lvars detected: 2764 lvars detected (was 2763): reloading... Tue May 28 07:01:51 2024 [INFO]: 2764 LVARS found, created 19 Client Data Areas Tue May 28 07:01:51 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:05:51 2024 [INFO]: New lvars detected: 2765 lvars detected (was 2764): reloading... Tue May 28 07:05:51 2024 [INFO]: 2765 LVARS found, created 19 Client Data Areas Tue May 28 07:05:51 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:06:00 2024 [INFO]: New lvars detected: 2766 lvars detected (was 2765): reloading... Tue May 28 07:06:00 2024 [INFO]: 2766 LVARS found, created 19 Client Data Areas Tue May 28 07:06:00 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:06:45 2024 [INFO]: New lvars detected: 2767 lvars detected (was 2766): reloading... Tue May 28 07:06:45 2024 [INFO]: 2767 LVARS found, created 19 Client Data Areas Tue May 28 07:06:45 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:06:53 2024 [INFO]: New lvars detected: 2768 lvars detected (was 2767): reloading... Tue May 28 07:06:53 2024 [INFO]: 2768 LVARS found, created 19 Client Data Areas Tue May 28 07:06:53 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:08:31 2024 [INFO]: New lvars detected: 2769 lvars detected (was 2768): reloading... Tue May 28 07:08:31 2024 [INFO]: 2769 LVARS found, created 19 Client Data Areas Tue May 28 07:08:31 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:08:37 2024 [INFO]: New lvars detected: 2770 lvars detected (was 2769): reloading... Tue May 28 07:08:37 2024 [INFO]: 2770 LVARS found, created 19 Client Data Areas Tue May 28 07:08:37 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:18:57 2024 [INFO]: New lvars detected: 2771 lvars detected (was 2770): reloading... Tue May 28 07:18:57 2024 [INFO]: 2771 LVARS found, created 19 Client Data Areas Tue May 28 07:18:57 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:19:11 2024 [INFO]: New lvars detected: 2772 lvars detected (was 2771): reloading... Tue May 28 07:19:11 2024 [INFO]: 2772 LVARS found, created 19 Client Data Areas Tue May 28 07:19:11 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:20:46 2024 [INFO]: New lvars detected: 2773 lvars detected (was 2772): reloading... Tue May 28 07:20:46 2024 [INFO]: 2773 LVARS found, created 19 Client Data Areas Tue May 28 07:20:46 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:20:54 2024 [INFO]: New lvars detected: 2774 lvars detected (was 2773): reloading... Tue May 28 07:20:54 2024 [INFO]: 2774 LVARS found, created 19 Client Data Areas Tue May 28 07:20:54 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:27:17 2024 [INFO]: New lvars detected: 2775 lvars detected (was 2774): reloading... Tue May 28 07:27:17 2024 [INFO]: 2775 LVARS found, created 20 Client Data Areas Tue May 28 07:27:17 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:27:34 2024 [INFO]: New lvars detected: 2776 lvars detected (was 2775): reloading... Tue May 28 07:27:34 2024 [INFO]: 2776 LVARS found, created 20 Client Data Areas Tue May 28 07:27:34 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:28:52 2024 [INFO]: New lvars detected: 2777 lvars detected (was 2776): reloading... Tue May 28 07:28:52 2024 [INFO]: 2777 LVARS found, created 20 Client Data Areas Tue May 28 07:28:52 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:29:07 2024 [INFO]: New lvars detected: 2778 lvars detected (was 2777): reloading... Tue May 28 07:29:07 2024 [INFO]: 2778 LVARS found, created 20 Client Data Areas Tue May 28 07:29:07 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:32:00 2024 [INFO]: New lvars detected: 2784 lvars detected (was 2778): reloading... Tue May 28 07:32:00 2024 [INFO]: 2784 LVARS found, created 20 Client Data Areas Tue May 28 07:32:00 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:33:03 2024 [INFO]: New lvars detected: 2785 lvars detected (was 2784): reloading... Tue May 28 07:33:03 2024 [INFO]: 2785 LVARS found, created 20 Client Data Areas Tue May 28 07:33:03 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:33:10 2024 [INFO]: New lvars detected: 2786 lvars detected (was 2785): reloading... Tue May 28 07:33:10 2024 [INFO]: 2786 LVARS found, created 20 Client Data Areas Tue May 28 07:33:10 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:33:22 2024 [INFO]: New lvars detected: 2787 lvars detected (was 2786): reloading... Tue May 28 07:33:22 2024 [INFO]: 2787 LVARS found, created 20 Client Data Areas Tue May 28 07:33:22 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:33:29 2024 [INFO]: New lvars detected: 2788 lvars detected (was 2787): reloading... Tue May 28 07:33:29 2024 [INFO]: 2788 LVARS found, created 20 Client Data Areas Tue May 28 07:33:29 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:34:54 2024 [INFO]: New lvars detected: 2794 lvars detected (was 2788): reloading... Tue May 28 07:34:54 2024 [INFO]: 2794 LVARS found, created 20 Client Data Areas Tue May 28 07:34:54 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:35:40 2024 [INFO]: New lvars detected: 2801 lvars detected (was 2794): reloading... Tue May 28 07:35:40 2024 [INFO]: 2801 LVARS found, created 20 Client Data Areas Tue May 28 07:35:40 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:35:42 2024 [INFO]: New lvars detected: 2802 lvars detected (was 2801): reloading... Tue May 28 07:35:42 2024 [INFO]: 2802 LVARS found, created 20 Client Data Areas Tue May 28 07:35:42 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:42:17 2024 [INFO]: New lvars detected: 2803 lvars detected (was 2802): reloading... Tue May 28 07:42:17 2024 [INFO]: 2803 LVARS found, created 20 Client Data Areas Tue May 28 07:42:17 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:42:32 2024 [INFO]: New lvars detected: 2804 lvars detected (was 2803): reloading... Tue May 28 07:42:32 2024 [INFO]: 2804 LVARS found, created 20 Client Data Areas Tue May 28 07:42:32 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:45:22 2024 [INFO]: New lvars detected: 2805 lvars detected (was 2804): reloading... Tue May 28 07:45:22 2024 [INFO]: 2805 LVARS found, created 20 Client Data Areas Tue May 28 07:45:22 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:45:31 2024 [INFO]: New lvars detected: 2806 lvars detected (was 2805): reloading... Tue May 28 07:45:31 2024 [INFO]: 2806 LVARS found, created 20 Client Data Areas Tue May 28 07:45:31 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:59:07 2024 [INFO]: New lvars detected: 2807 lvars detected (was 2806): reloading... Tue May 28 07:59:07 2024 [INFO]: 2807 LVARS found, created 20 Client Data Areas Tue May 28 07:59:07 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 07:59:26 2024 [INFO]: New lvars detected: 2808 lvars detected (was 2807): reloading... Tue May 28 07:59:26 2024 [INFO]: 2808 LVARS found, created 20 Client Data Areas Tue May 28 07:59:26 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:03:59 2024 [INFO]: New lvars detected: 2838 lvars detected (was 2808): reloading... Tue May 28 08:03:59 2024 [INFO]: 2838 LVARS found, created 20 Client Data Areas Tue May 28 08:03:59 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:05:18 2024 [INFO]: New lvars detected: 2839 lvars detected (was 2838): reloading... Tue May 28 08:05:18 2024 [INFO]: 2839 LVARS found, created 20 Client Data Areas Tue May 28 08:05:18 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:05:26 2024 [INFO]: New lvars detected: 2840 lvars detected (was 2839): reloading... Tue May 28 08:05:26 2024 [INFO]: 2840 LVARS found, created 20 Client Data Areas Tue May 28 08:05:26 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:20:39 2024 [INFO]: New lvars detected: 2841 lvars detected (was 2840): reloading... Tue May 28 08:20:39 2024 [INFO]: 2841 LVARS found, created 20 Client Data Areas Tue May 28 08:20:39 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:20:58 2024 [INFO]: New lvars detected: 2842 lvars detected (was 2841): reloading... Tue May 28 08:20:58 2024 [INFO]: 2842 LVARS found, created 20 Client Data Areas Tue May 28 08:20:58 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:21:27 2024 [INFO]: New lvars detected: 2843 lvars detected (was 2842): reloading... Tue May 28 08:21:27 2024 [INFO]: 2843 LVARS found, created 20 Client Data Areas Tue May 28 08:21:27 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:21:44 2024 [INFO]: New lvars detected: 2844 lvars detected (was 2843): reloading... Tue May 28 08:21:44 2024 [INFO]: 2844 LVARS found, created 20 Client Data Areas Tue May 28 08:21:44 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:22:09 2024 [INFO]: New lvars detected: 2845 lvars detected (was 2844): reloading... Tue May 28 08:22:09 2024 [INFO]: 2845 LVARS found, created 20 Client Data Areas Tue May 28 08:22:09 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:22:15 2024 [INFO]: New lvars detected: 2846 lvars detected (was 2845): reloading... Tue May 28 08:22:15 2024 [INFO]: 2846 LVARS found, created 20 Client Data Areas Tue May 28 08:22:15 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:22:50 2024 [INFO]: New lvars detected: 2847 lvars detected (was 2846): reloading... Tue May 28 08:22:50 2024 [INFO]: 2847 LVARS found, created 20 Client Data Areas Tue May 28 08:22:50 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:23:07 2024 [INFO]: New lvars detected: 2848 lvars detected (was 2847): reloading... Tue May 28 08:23:07 2024 [INFO]: 2848 LVARS found, created 20 Client Data Areas Tue May 28 08:23:07 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:23:13 2024 [INFO]: New lvars detected: 2849 lvars detected (was 2848): reloading... Tue May 28 08:23:13 2024 [INFO]: 2849 LVARS found, created 20 Client Data Areas Tue May 28 08:23:13 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:23:22 2024 [INFO]: New lvars detected: 2850 lvars detected (was 2849): reloading... Tue May 28 08:23:22 2024 [INFO]: 2850 LVARS found, created 20 Client Data Areas Tue May 28 08:23:22 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:24:17 2024 [INFO]: New lvars detected: 2851 lvars detected (was 2850): reloading... Tue May 28 08:24:17 2024 [INFO]: 2851 LVARS found, created 20 Client Data Areas Tue May 28 08:24:17 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:24:21 2024 [INFO]: New lvars detected: 2852 lvars detected (was 2851): reloading... Tue May 28 08:24:21 2024 [INFO]: 2852 LVARS found, created 20 Client Data Areas Tue May 28 08:24:21 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:24:23 2024 [INFO]: New lvars detected: 2853 lvars detected (was 2852): reloading... Tue May 28 08:24:23 2024 [INFO]: 2853 LVARS found, created 20 Client Data Areas Tue May 28 08:24:23 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:24:38 2024 [INFO]: New lvars detected: 2854 lvars detected (was 2853): reloading... Tue May 28 08:24:38 2024 [INFO]: 2854 LVARS found, created 20 Client Data Areas Tue May 28 08:24:38 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:24:59 2024 [INFO]: New lvars detected: 2855 lvars detected (was 2854): reloading... Tue May 28 08:24:59 2024 [INFO]: 2855 LVARS found, created 20 Client Data Areas Tue May 28 08:24:59 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:25:18 2024 [INFO]: New lvars detected: 2856 lvars detected (was 2855): reloading... Tue May 28 08:25:18 2024 [INFO]: 2856 LVARS found, created 20 Client Data Areas Tue May 28 08:25:18 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:26:31 2024 [INFO]: New lvars detected: 2857 lvars detected (was 2856): reloading... Tue May 28 08:26:31 2024 [INFO]: 2857 LVARS found, created 20 Client Data Areas Tue May 28 08:26:31 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:26:49 2024 [INFO]: New lvars detected: 2858 lvars detected (was 2857): reloading... Tue May 28 08:26:49 2024 [INFO]: 2858 LVARS found, created 20 Client Data Areas Tue May 28 08:26:49 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:26:51 2024 [INFO]: New lvars detected: 2859 lvars detected (was 2858): reloading... Tue May 28 08:26:51 2024 [INFO]: 2859 LVARS found, created 20 Client Data Areas Tue May 28 08:26:51 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:26:53 2024 [INFO]: New lvars detected: 2860 lvars detected (was 2859): reloading... Tue May 28 08:26:53 2024 [INFO]: 2860 LVARS found, created 20 Client Data Areas Tue May 28 08:26:53 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:26:55 2024 [INFO]: New lvars detected: 2861 lvars detected (was 2860): reloading... Tue May 28 08:26:55 2024 [INFO]: 2861 LVARS found, created 20 Client Data Areas Tue May 28 08:26:55 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:26:59 2024 [INFO]: New lvars detected: 2862 lvars detected (was 2861): reloading... Tue May 28 08:26:59 2024 [INFO]: 2862 LVARS found, created 20 Client Data Areas Tue May 28 08:26:59 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:27:01 2024 [INFO]: New lvars detected: 2863 lvars detected (was 2862): reloading... Tue May 28 08:27:01 2024 [INFO]: 2863 LVARS found, created 20 Client Data Areas Tue May 28 08:27:01 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:27:10 2024 [INFO]: New lvars detected: 2865 lvars detected (was 2863): reloading... Tue May 28 08:27:10 2024 [INFO]: 2865 LVARS found, created 20 Client Data Areas Tue May 28 08:27:10 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:27:26 2024 [INFO]: New lvars detected: 2866 lvars detected (was 2865): reloading... Tue May 28 08:27:26 2024 [INFO]: 2866 LVARS found, created 20 Client Data Areas Tue May 28 08:27:26 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:28:27 2024 [INFO]: New lvars detected: 2867 lvars detected (was 2866): reloading... Tue May 28 08:28:27 2024 [INFO]: 2867 LVARS found, created 20 Client Data Areas Tue May 28 08:28:27 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:28:34 2024 [INFO]: New lvars detected: 2868 lvars detected (was 2867): reloading... Tue May 28 08:28:34 2024 [INFO]: 2868 LVARS found, created 20 Client Data Areas Tue May 28 08:28:34 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:33:56 2024 [INFO]: New lvars detected: 2869 lvars detected (was 2868): reloading... Tue May 28 08:33:56 2024 [INFO]: 2869 LVARS found, created 20 Client Data Areas Tue May 28 08:33:56 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:34:04 2024 [INFO]: New lvars detected: 2870 lvars detected (was 2869): reloading... Tue May 28 08:34:04 2024 [INFO]: 2870 LVARS found, created 20 Client Data Areas Tue May 28 08:34:04 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:51:26 2024 [INFO]: New lvars detected: 2871 lvars detected (was 2870): reloading... Tue May 28 08:51:26 2024 [INFO]: 2871 LVARS found, created 20 Client Data Areas Tue May 28 08:51:26 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:51:43 2024 [INFO]: New lvars detected: 2872 lvars detected (was 2871): reloading... Tue May 28 08:51:43 2024 [INFO]: 2872 LVARS found, created 20 Client Data Areas Tue May 28 08:51:43 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:52:59 2024 [INFO]: New lvars detected: 2873 lvars detected (was 2872): reloading... Tue May 28 08:52:59 2024 [INFO]: 2873 LVARS found, created 20 Client Data Areas Tue May 28 08:52:59 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:53:14 2024 [INFO]: New lvars detected: 2874 lvars detected (was 2873): reloading... Tue May 28 08:53:14 2024 [INFO]: 2874 LVARS found, created 20 Client Data Areas Tue May 28 08:53:14 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:53:35 2024 [INFO]: New lvars detected: 2876 lvars detected (was 2874): reloading... Tue May 28 08:53:35 2024 [INFO]: 2876 LVARS found, created 20 Client Data Areas Tue May 28 08:53:35 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:53:43 2024 [INFO]: New lvars detected: 2877 lvars detected (was 2876): reloading... Tue May 28 08:53:43 2024 [INFO]: 2877 LVARS found, created 20 Client Data Areas Tue May 28 08:53:43 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:53:54 2024 [INFO]: New lvars detected: 2878 lvars detected (was 2877): reloading... Tue May 28 08:53:54 2024 [INFO]: 2878 LVARS found, created 20 Client Data Areas Tue May 28 08:53:54 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:54:02 2024 [INFO]: New lvars detected: 2879 lvars detected (was 2878): reloading... Tue May 28 08:54:02 2024 [INFO]: 2879 LVARS found, created 20 Client Data Areas Tue May 28 08:54:02 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:54:09 2024 [INFO]: New lvars detected: 2880 lvars detected (was 2879): reloading... Tue May 28 08:54:09 2024 [INFO]: 2880 LVARS found, created 20 Client Data Areas Tue May 28 08:54:09 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:57:48 2024 [INFO]: New lvars detected: 2881 lvars detected (was 2880): reloading... Tue May 28 08:57:48 2024 [INFO]: 2881 LVARS found, created 20 Client Data Areas Tue May 28 08:57:48 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 08:57:54 2024 [INFO]: New lvars detected: 2882 lvars detected (was 2881): reloading... Tue May 28 08:57:54 2024 [INFO]: 2882 LVARS found, created 20 Client Data Areas Tue May 28 08:57:54 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 09:10:07 2024 [INFO]: New lvars detected: 2883 lvars detected (was 2882): reloading... Tue May 28 09:10:07 2024 [INFO]: 2883 LVARS found, created 20 Client Data Areas Tue May 28 09:10:07 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 09:10:24 2024 [INFO]: New lvars detected: 2884 lvars detected (was 2883): reloading... Tue May 28 09:10:24 2024 [INFO]: 2884 LVARS found, created 20 Client Data AreasFSUIPC7.log Tue May 28 09:10:24 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 09:12:00 2024 [INFO]: New lvars detected: 2885 lvars detected (was 2884): reloading... Tue May 28 09:12:00 2024 [INFO]: 2885 LVARS found, created 20 Client Data Areas Tue May 28 09:12:00 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 09:12:06 2024 [INFO]: New lvars detected: 2886 lvars detected (was 2885): reloading... Tue May 28 09:12:06 2024 [INFO]: 2886 LVARS found, created 20 Client Data Areas Tue May 28 09:12:06 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 09:12:08 2024 [INFO]: New lvars detected: 2887 lvars detected (was 2886): reloading... Tue May 28 09:12:08 2024 [INFO]: 2887 LVARS found, created 20 Client Data Areas Tue May 28 09:12:08 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 09:12:10 2024 [INFO]: New lvars detected: 2888 lvars detected (was 2887): reloading... Tue May 28 09:12:10 2024 [INFO]: 2888 LVARS found, created 20 Client Data Areas Tue May 28 09:12:10 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 09:12:12 2024 [INFO]: New lvars detected: 2889 lvars detected (was 2888): reloading... Tue May 28 09:12:12 2024 [INFO]: 2889 LVARS found, created 20 Client Data Areas Tue May 28 09:12:12 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 Tue May 28 09:12:19 2024 [INFO]: New lvars detected: 2890 lvars detected (was 2889): reloading... Tue May 28 09:12:19 2024 [INFO]: 2890 LVARS found, created 20 Client Data Areas Tue May 28 09:12:19 2024 [INFO]: Need 3 CDAs to hold lvar values, currently have 3 ********* FSUIPC7, Version 7.4.12c (8th April 2024) by John Dowson ********* **** New version available: version 7.4.12 is available (you are using a beta version of this release) **** MS Store installation detected: Checking for FS path in 'C:\Users\Basti\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\UserCfg.opt' FS path found = H:\MSFS\ WebSocket server found: C:\FSUIPC7\\Utils\FSUIPCWebSocketServer.exe Windows 11 detected - setting DisableMSFSMonitor to 'Enum' Windows 10 Pro 64 Bit reported as Build 22631, Release ID: 2009 (OS 10.0) Reading options from "C:\FSUIPC7\FSUIPC7.ini" Checking the Registrations now ... User Name="Sebastian Graser" User Addr="Sebastian.Graser@gmx.de" FSUIPC7 Key is provided WIDEFS7 not user registered, or expired 156 System time = 28/05/2024 13:54:53 156 FLT path = "C:\Users\Basti\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\" 156 Allowing calibration when not assigned with 'Send direct to FSUIPC Calibration' 172 ------------------------------------------------------------------- 172 Preset file 'C:\FSUIPC7\events.txt' not found [info only] 172 Preset file 'C:\FSUIPC7\myevents.txt' not found [info only] 187 0 Calculator Code presets have been loaded and are available for use 281 Registered HotKey 'InvokeFSUIPCOptionsKey' (key=0x46, modifier=0x1) 312 FS path = "H:\MSFS\" 312 ---------------------- Joystick Device Scan ----------------------- 312 Product= MFG Crosswind V2/3 328 Manufacturer= MFG 328 Serial Number= MFG500002 328 Vendor=16D0, Product=0A38 (Version 33.1) 344 GUIDs returned for product: VID_16D0&PID_0A38: 344 GUID= {13BD95F0-0D19-11EF-8001-444553540000} 344 Details: Btns=2, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R8192,U0,V0,X8192,Y8192,Z0 344 Product= TCA Quadrant Airbus Pilot 344 Manufacturer= Thrustmaster 344 Serial Number= 2059384F4232 359 Vendor=044F, Product=04FC (Version 2.0) 359 GUIDs returned for product: VID_044F&PID_04FC: 359 GUID= {E28853E0-944A-11EE-8002-444553540000} 359 Details: Btns=31, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R65535,U65535,V65535,X65535,Y65535,Z65535 359 Product= TCA Sidestick X Pilot 375 Manufacturer= Thrustmaster 375 Serial Number= 2059384F4232 375 Vendor=044F, Product=040E (Version 2.0) 375 GUIDs returned for product: VID_044F&PID_040E: 375 GUID= {4E95E7E0-9447-11EE-8001-444553540000} 375 Details: Btns=22, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R65535,U0,V0,X65535,Y65535,Z65535 375 Product= vJoy - Virtual Joystick 391 Manufacturer= Shaul Eizikovich 391 Serial Number= 2.1.9 391 Vendor=1234, Product=BEAD (Version 2.25) 391 GUIDs returned for product: VID_1234&PID_BEAD: 391 GUID= {2B6380B0-A317-11ED-8002-444553540000} 391 Details: Btns=10, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X0,Y0,Z0 391 GUID= {DF701A10-B9D2-11ED-8003-444553540000} 391 Details: Btns=2, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X0,Y0,Z0 391 Product= vJoy - Virtual Joystick 406 Manufacturer= Shaul Eizikovich 406 Serial Number= 2.1.9 406 Vendor=1234, Product=BEAD (Version 2.25) 406 ------------------------------------------------------------------- 453 Device acquired for use: 453 Joystick ID = 3 (Registry okay) 453 3=MFG Crosswind V2/3 453 3.GUID={13BD95F0-0D19-11EF-8001-444553540000} 453 Device acquired for use: 469 Joystick ID = 0 (Registry okay) 469 0=TCA Quadrant Airbus Pilot 469 0.GUID={E28853E0-944A-11EE-8002-444553540000} 469 Device acquired for use: 469 Joystick ID = 1 (Registry okay) 469 1=TCA Sidestick X Pilot 469 1.GUID={4E95E7E0-9447-11EE-8001-444553540000} 469 Device acquired for use: 469 Joystick ID = 2 (Registry okay) 469 2=vJoy Device 469 2.GUID={2B6380B0-A317-11ED-8002-444553540000} 484 Device acquired for use: 484 Joystick ID = 4 (Registry okay) 484 4=vJoy Device 484 4.GUID={DF701A10-B9D2-11ED-8003-444553540000} 484 ------------------------------------------------------------------- 500 LogOptions=80000000 00000001 500 Manually started with DetectToConnectDelay=5, InitialStallTime=5 641 Monitor IPC:5408 (S8) = 0 3266 Simulator detected 8266 Trying to connect... 8641 SimConnect_Open succeeded 8641 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3) 8641 MSFS version = 11.0.282174.999 8641 Initialising SimConnect data requests now 8641 Offset file 'C:\FSUIPC7\myOffsets.txt' not found (info only) 8641 Mapping custom control numbers 69632 - 84232 8656 Maximum number of custom events available is 1024 (defined by ini parameter MaxNumberOfCustomEvents) 8656 C:\Users\Basti\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\MISSIONS\Custom\CustomFlight\CustomFlight.FLT 8859 SimObjects\Airplanes\FNX_320_CFM\aircraft.CFG 11000 h:\msfs\community\fnx-aircraft-320\simobjects\airplanes\fnx_320_cfm\aircraft.cfg 11172 Aircraft loaded: running normally now ... 11203 User Aircraft ID 1 supplied, now being used (myftm=1) 11203 Requesting user aircraft data... 12625 System time = 28/05/2024 13:55:06, Simulator time = 13:55:00 (11:55Z) 12641 Aircraft="FenixA320 Lufthansa D-AIZI" 43344 -------------------- Starting everything now ---------------------- 43344 Starting WAPI.... 43344 [INFO]: **** Starting FSUIPC7 WASM Interface (WAPI) version 1.0.4 (WASM version 1.0.3) using connection -1 43344 [INFO]: Connected to MSFS FSUIPC7.ini Edited May 28 by EisernUnion
John Dowson Posted May 28 Report Posted May 28 Can you please download and update to the official release of 7.4.12 - you are using 7.4.12c, a beta version, which is no longer supported. Are you using 7.4.12c with the WASM for 7.4.12? This can maybe cause issues as they are compiled against different MSFS SDK versions and also different VC++ redistributables. So please update to the latest official release, try again and then show me the updated files. Also please activate debug logging for the WAPI (Log -> WAPI -> Debug). Also, please exit FSUIPC7 BEFORE attaching files. Your FSUIPC7.log shows that FSUIPC7 was still running (i.e. no closing statements) or had crashed... And those log files show completely different time stamps - I need to see the files from the same session, and the FSUIPC_WASM.log not the FSUIPC_WASM_prev.log, which is always the log file from the previous session. Your ini file also shows some issues with controllers, but you only have two assignments: Quote 1=HB,0,K131,8 -{Key press: F20}- 2=PF,0,K130,8 -{Key press: F19}- and both of these are for a T.A320 Pilot controller which you no longer seem to be using: Quote B=T.A320 Pilot << MISSING JOYSTICK >> B.GUID={E2CC7670-F0DA-11EC-8001-444553540000} ... F=T.A320 Pilot << MISSING JOYSTICK >> F.GUID={A892F9E0-A302-11ED-8004-444553540000} To clean things up a bit, delete those two button assignments, and remove all the joy letter assignments, i.e. your [JoyNames] section should just contain: Quote [JoyNames] 0=TCA Quadrant Airbus Pilot 0.GUID={E28853E0-944A-11EE-8002-444553540000} 1=TCA Sidestick X Pilot 1.GUID={4E95E7E0-9447-11EE-8001-444553540000} 2=vJoy Device 2.GUID={2B6380B0-A317-11ED-8002-444553540000} 3=MFG Crosswind V2/3 3.GUID={13BD95F0-0D19-11EF-8001-444553540000} 4=vJoy Device 4.GUID={DF701A10-B9D2-11ED-8003-444553540000} New joyletters will then be assigned, starting from A, and you will have a clean ini ready for assignments. John
John Dowson Posted May 28 Report Posted May 28 Also, better to change the following two ini parameters in the [General] section of your ini file and let auto-tuning do its thing (keep all other parameters as they are): Quote InitialStallTime=15 DetectToConnectDelayAuto=60 John
EisernUnion Posted May 28 Report Posted May 28 I just reinstalled the c beta version shortly before i posted in this thread, the stopping wasm log was on the final release version... so neither beta or release is working
EisernUnion Posted May 28 Report Posted May 28 59 minutes ago, John Dowson said: Also, better to change the following two ini parameters in the [General] section of your ini file and let auto-tuning do its thing (keep all other parameters as they are): John had this also before i posted .... .... i changed it to values shortly befor i posted ..... the autotune value was something 320ish
EisernUnion Posted May 28 Report Posted May 28 To sum up .... - It stops working at some point within the msfs session .... msfs was running since 07:00 until shortly before i posted here ..... WASM Log stopped at 09:12z .... just silently died - At this time i had version 7.4.12 installed -Autotune was active and had a value around 320 or sth. DetectToConnectDelayAuto=310 StartUpTuningDoneVersion=1 StartUpTuningActive=Yes DetectToConnectDelay=5 What to do to prevent lua from stop working at some point ??? EDIT: I restarted MSFS.... still nothing... i assume, some session hast not quit ...? Log Files attached 514953 328 **** Thread 21808 created for MyTimer 519843 328 **** Thread 18456 created for MyTimer 540922 328 Starting WAPI (WAPI enabled)... 540922 328 [INFO]: **** Starting FSUIPC7 WASM Interface (WAPI) version 1.0.4 (WASM version 1.0.3) using connection -1 540922 328 [INFO]: Connected to MSFS 541062 6152 Lvars received: 2680 L:vars & 220 H:vars now available 541062 6152 Requesting Input Events... 541062 6152 Lvars/Hvars received - checking aircraft autos.... 541343 15816 Plug-in thread table check: 541343 15816 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 541343 15816 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 541343 15816 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 541359 15816 Plug-in thread table check: 541359 15816 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 541359 15816 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 541359 15816 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 543234 6152 Lvars received: 2681 L:vars & 220 H:vars now available 544062 6152 Lvars received: 2683 L:vars & 220 H:vars now available 545218 18160 Plug-in thread table check: 545218 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545218 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545218 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545234 18160 Plug-in thread table check: 545234 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545234 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545234 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545250 18160 Plug-in thread table check: 545250 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545250 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545250 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545265 18160 Plug-in thread table check: 545265 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545265 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545265 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545281 18160 Plug-in thread table check: 545281 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545281 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545281 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545297 18160 Plug-in thread table check: 545297 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545297 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545297 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545312 18160 Plug-in thread table check: 545312 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545312 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545312 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545328 18160 Plug-in thread table check: 545328 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545328 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545328 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545343 18160 Plug-in thread table check: 545343 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545343 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545343 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545359 18160 Plug-in thread table check: 545359 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545359 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545359 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545375 18160 Plug-in thread table check: 545375 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545375 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545375 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545390 18160 Plug-in thread table check: 545390 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545390 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545390 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545406 18160 Plug-in thread table check: 545406 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545406 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545406 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545422 18160 Plug-in thread table check: 545422 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545422 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545422 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545437 18160 Plug-in thread table check: 545437 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545437 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545437 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545453 18160 Plug-in thread table check: 545453 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545453 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545453 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545468 18160 Plug-in thread table check: 545468 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545468 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545468 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545484 18160 Plug-in thread table check: 545484 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545484 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545484 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545500 18160 Plug-in thread table check: 545500 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545500 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545500 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545515 18160 Plug-in thread table check: 545515 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545515 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545515 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545531 18160 Plug-in thread table check: 545531 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545531 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545531 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545547 18160 Plug-in thread table check: 545547 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545547 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545547 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545562 18160 Plug-in thread table check: 545562 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545562 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545562 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545578 18160 Plug-in thread table check: 545578 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545578 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545578 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545593 18160 Plug-in thread table check: 545593 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545593 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545593 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 545609 18160 Plug-in thread table check: 545609 18160 1: Okay: "C:\FSUIPC7\GSX_AUTO.lua" 545609 18160 2: Okay: "C:\FSUIPC7\FNX320_SYNC.lua" 545609 18160 3: Okay: "C:\FSUIPC7\FNX320_LIGHTS.lua" 554406 6152 Lvars received: 2684 L:vars & 220 H:vars now available 558531 328 Deactivated for PID=5512, "msedge.exe" 558531 328 Lost focus to PID=5512, "msedge.exe" EDIT2: Strange ... another try, started msfs again ... in the fsuipc window under "WASM" the only option was "Disable", all others were greyed out ... i klickt disable, enabled it and instantly lua loaded in .... just a coincidence ? FSUIPC_WASM.log FSUIPC7.log FSUIPC7.ini
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now