zorzini

Thank you a lot for clarification. Bye

It's not a problem but just a curiosity: is it possible to understand why, even without touching the devices, the FSUIPC Console detects all these continuous events? I attach the FSUIPC7.log file if it can be useful (and also the FSUIPC7.ini file) MSFS 2024 - FSUIPC 7.5 Thank you FSUIPC7.log FSUIPC7.ini

Hi, today I installed a very old copy of Microsoft FS 2002 without problems and it works correctly. Is it possible to use some old version of FSUIPC to access the sim ? Thank you

It's correct...sorry Ciao and thank you

As always, 10,000 thanks for your availability. This little problem torments me but I would struggle to study LUA which I have never used from scratch. Only one question (at the moment): i have the file called "bong" as wav file; in the script is without the estension wav: is correct without or i have to add the estension ? Thank you

I'm asking too much if you could provide me the simple lua script to test the audio? Thank you

Hi after weeks of testing I am forced to ask for your help to understand a problem that occurs when trying to reproduce sounds using a LUA (PMCO_FNX32X.lua) and FSUIPC7 script. I attach the LUA script PMCO_FNX32X.lua the FSUIPC7.ini and the FSUIPC7.log The audio files are correctly present in the PMCO_FNX32X_Sounds directory I don't understand why the "calls" of the Fenix's speeds are not reproduced by the main audio driver which otherwise works correctly. In the fsuipc7 log I see that the LUA correctly generates the flap position call (line 427844 etc) but nothing comes out of the speaker. Thank you for your attention. P.S. I probably don't understand how FSUIPC7 identifies and uses the audio driver in use. Just tried with complete FSUIPC reinstall but nothing change. FSUIPC7.ini FSUIPC7.log PMCO_FNX32X.lua

Wanting to understand how our fsuipc works, I found a pdf where the basics of operation are explained. The file is mentioned FSUIPC_IO.ini where the offsets with the variables and their values would be recorded. Not having found the FSUIPC_IO.ini file, should I think it is an obsolete document? Thank you

Thanky You John, Your answer is good at the moment. I have just discovered some Lvars and related functions in cooperation with Mobiflight supporters for Aerosoft CRJ and just included in latest events file. Also I tought that fsuipc-lvar-module could be another instrument to help me. Thanks again Bye

Hi dear Dowson, could You pleas let me know if is avaiable documentation reagarding how to use fsuipc-lvar-module ? Thanks in advance.

A lot of thanks for very quick replay. We spent only half day with tests before ask You. Bye

Dear friends, I'm trying to set my autopilot panel for using with Aerosoft CRJ via FSUIPC7 7.0.8 and Mobiflight. For that I (and a friend of mine more experienced with) trying to write a ASCRJ.lua file including few LVARS for testing. First step we will test the APPR led on state by using Offset 0x6800 We do not undestand why at simulator and FSUIPC7 launch in fsuipc7.log appears this error and lua macro does not operate: 246266 *** LUA Error: D:\MSFS_Mobiflight\FSUIPC7\ASCRJ.lua:44: attempt to call field 'Lvar' (a nil value) The error line is the first line in AUTOPILOT OUTPUTS in ASCRJ.lua event.Lvar("ASCRJ_FCP_APPR_LED", lvps, "ASCRJ_FCP_APPR_LED") -- (enum) | offset = 0x6800 | type = int | size = UB, 1 | mask = 0xFF if I remark this line in ASCRJ.lua the error comes at next line: event.Lvar("ASCRJ_FCP_BC_LED", lvps, "ASCRJ_FCP_BC_LED") -- (enum) | offset = 0x6801 | type = int | size = UB, 1 | mask = 0xFF Just verified the local variable name ASCRJ_FCP_APPR_LED Also we suspect a syntax error but we dont know what. If possible could You please take a look at the attached files (ASCRJ.lua, CRJ-LVARS.txt, FSUIPC7.ini, FSUIPC7.log) and supply me a suggestion ? Thanks in advance ASCRJ.lua CRJ-LVARS.txt FSUIPC7.ini FSUIPC7.log

Ok...understood. Tomorrow I will apply Your suggestions. I prefer to dont use the Ms xml solution due to prevent possible updates from Microsoft. Thanks

Hi, recently I updated FSUIPC7 at latest release 7.0.4 via the installer. As per previously updates I replaced the FSUIPC7.ini with the older because it contains some personal settings. I also use the older MSFSwithFSUIPC7.bat to launch MSFS, FSUIPC7 and MOBIFLIGHT (I added a command line in MSFSwithFSUIPC7.bat to launch MobiFlight). Now when I launch MSFS with FSUIPC7 shortcut on desktop FSUIPC7 seems start twice as reported by the message You can see in attached image. I also attach FSUIPC7.ini and MSFSwithFSUIPC7.bat and FSUIPC7.log Not a big problem: I close the warning and all goes well. Thanks for attention FSUIPC7.ini FSUIPC7.log MSFSwithFSUIPC7.bat

Hi John As usually a lot of thanks for answer and your great job Bye

Hi, I bought the first release of FSUIPC7 and discovered that now is version 7.0.4. Where is possible to discover if a new release is avaiable ? Thanks

Yesssss, off course. Thank and HAPPY NEW YEAR

Hi, could be possible to exclude also the file MSFSwithFSUIPC7.bat from overwrite with new one when an FSUIPC7 updated release will be installed ? This because I add extra command lines in order to add other functions during startup process like run Mobiflight connector etc. If not I will continue to save the old one and also looking in the new one batch file if are different lines. Thanks

Hi John, thanks for Your attention. Finally I understood that is another, another, another MSFS bug. Bye

Hi John thanks for suggestion. I will test and inform.

Hi John, i'm retired technician and in the latest ten year i have installed here in Sicily about 800 internet connections like yours. The speed could not go more over 30 Mb (at reasonable cost). Good luck for next provider and Merry Christmaa and Happy New Year (without covid we hope).

Hi John and thanks for answer. The CRS issue is not a big problem and I can wait. Regarding connection problem I'm afraid if You are without it. Fortunatelly I discovered this morning that my provider double me the speed (from 100 to 200 Mb) without extra cost...probably a Christmas gift...non only bad covid news also. Bye

Hi John, thanks for replay. In attachment the requested files. I also saw that in logs are other events logged not used by me like : 13640703 *** EVENT: Cntrl= 66096 (0x00010230), Param= 0 (0x00000000) AP_MACH_ON It is better to include that events in "DontLogThese" item in fsuipc7.ini ? Thanks for support. Bye FSUIPC7.at ground.log FSUIPC7.in fly.log FSUIPC7.ini

Hi, I dont know if this behaviour is correct or not: I set the VOR COURSE value with an encoder and 65662 param 0 for decrease value and 65663 param 0 for increase. When I'm NOT in fly (at parking) this works always correct (decrease and increase by plus or minus 1 degree). When I'm in flight and attempt to reach VOR radial the value change plus or minus 5 degrees. The encoder works correctly and not send false impulses. Thanks for suggestions.

Ok...by reading ini and log fsuipc7 files now I understood a little bit better how Assignments working. Thanks for support Bye