zorzini

Wanting to understand how our fsuipc works, I found a pdf where the basics of operation are explained. The file is mentioned FSUIPC_IO.ini where the offsets with the variables and their values would be recorded. Not having found the FSUIPC_IO.ini file, should I think it is an obsolete document? Thank you

Thanky You John, Your answer is good at the moment. I have just discovered some Lvars and related functions in cooperation with Mobiflight supporters for Aerosoft CRJ and just included in latest events file. Also I tought that fsuipc-lvar-module could be another instrument to help me. Thanks again Bye

Hi dear Dowson, could You pleas let me know if is avaiable documentation reagarding how to use fsuipc-lvar-module ? Thanks in advance.

A lot of thanks for very quick replay. We spent only half day with tests before ask You. Bye

Dear friends, I'm trying to set my autopilot panel for using with Aerosoft CRJ via FSUIPC7 7.0.8 and Mobiflight. For that I (and a friend of mine more experienced with) trying to write a ASCRJ.lua file including few LVARS for testing. First step we will test the APPR led on state by using Offset 0x6800 We do not undestand why at simulator and FSUIPC7 launch in fsuipc7.log appears this error and lua macro does not operate: 246266 *** LUA Error: D:\MSFS_Mobiflight\FSUIPC7\ASCRJ.lua:44: attempt to call field 'Lvar' (a nil value) The error line is the first line in AUTOPILOT OUTPUTS in ASCRJ.lua event.Lvar("ASCRJ_FCP_APPR_LED", lvps, "ASCRJ_FCP_APPR_LED") -- (enum) | offset = 0x6800 | type = int | size = UB, 1 | mask = 0xFF if I remark this line in ASCRJ.lua the error comes at next line: event.Lvar("ASCRJ_FCP_BC_LED", lvps, "ASCRJ_FCP_BC_LED") -- (enum) | offset = 0x6801 | type = int | size = UB, 1 | mask = 0xFF Just verified the local variable name ASCRJ_FCP_APPR_LED Also we suspect a syntax error but we dont know what. If possible could You please take a look at the attached files (ASCRJ.lua, CRJ-LVARS.txt, FSUIPC7.ini, FSUIPC7.log) and supply me a suggestion ? Thanks in advance ASCRJ.lua CRJ-LVARS.txt FSUIPC7.ini FSUIPC7.log

Ok...understood. Tomorrow I will apply Your suggestions. I prefer to dont use the Ms xml solution due to prevent possible updates from Microsoft. Thanks

Hi, recently I updated FSUIPC7 at latest release 7.0.4 via the installer. As per previously updates I replaced the FSUIPC7.ini with the older because it contains some personal settings. I also use the older MSFSwithFSUIPC7.bat to launch MSFS, FSUIPC7 and MOBIFLIGHT (I added a command line in MSFSwithFSUIPC7.bat to launch MobiFlight). Now when I launch MSFS with FSUIPC7 shortcut on desktop FSUIPC7 seems start twice as reported by the message You can see in attached image. I also attach FSUIPC7.ini and MSFSwithFSUIPC7.bat and FSUIPC7.log Not a big problem: I close the warning and all goes well. Thanks for attention FSUIPC7.ini FSUIPC7.log MSFSwithFSUIPC7.bat

Hi John As usually a lot of thanks for answer and your great job Bye

Hi, I bought the first release of FSUIPC7 and discovered that now is version 7.0.4. Where is possible to discover if a new release is avaiable ? Thanks

Yesssss, off course. Thank and HAPPY NEW YEAR

Hi, could be possible to exclude also the file MSFSwithFSUIPC7.bat from overwrite with new one when an FSUIPC7 updated release will be installed ? This because I add extra command lines in order to add other functions during startup process like run Mobiflight connector etc. If not I will continue to save the old one and also looking in the new one batch file if are different lines. Thanks

Hi John, thanks for Your attention. Finally I understood that is another, another, another MSFS bug. Bye

Hi John thanks for suggestion. I will test and inform.

Hi John, i'm retired technician and in the latest ten year i have installed here in Sicily about 800 internet connections like yours. The speed could not go more over 30 Mb (at reasonable cost). Good luck for next provider and Merry Christmaa and Happy New Year (without covid we hope).

Hi John and thanks for answer. The CRS issue is not a big problem and I can wait. Regarding connection problem I'm afraid if You are without it. Fortunatelly I discovered this morning that my provider double me the speed (from 100 to 200 Mb) without extra cost...probably a Christmas gift...non only bad covid news also. Bye

Hi John, thanks for replay. In attachment the requested files. I also saw that in logs are other events logged not used by me like : 13640703 *** EVENT: Cntrl= 66096 (0x00010230), Param= 0 (0x00000000) AP_MACH_ON It is better to include that events in "DontLogThese" item in fsuipc7.ini ? Thanks for support. Bye FSUIPC7.at ground.log FSUIPC7.in fly.log FSUIPC7.ini

Hi, I dont know if this behaviour is correct or not: I set the VOR COURSE value with an encoder and 65662 param 0 for decrease value and 65663 param 0 for increase. When I'm NOT in fly (at parking) this works always correct (decrease and increase by plus or minus 1 degree). When I'm in flight and attempt to reach VOR radial the value change plus or minus 5 degrees. The encoder works correctly and not send false impulses. Thanks for suggestions.

Ok...by reading ini and log fsuipc7 files now I understood a little bit better how Assignments working. Thanks for support Bye

Hi John, I do a quick test but via a remote laptop also I cannot move physically the TCA Quadrant but I recognize via fsuipc7.ini and fsuipc7.log that: The Joy# letter is E also is the TCA Quadrant. I have to push some times "Ignore Axis" button and ignore E-Z, E-V, E-R, E-U, E-Y, E-X (joy#-axis# received inputs) before have joy# and axis# fields avaiable. Ok, tomorrow I will be able to operate the TCA throttles and proceeding with assignments. Thanks for help P.S. only a doubt: the FSUIPC7 assignments are like an overlay over the existing joystick MSFS assignments also does not matter what profile (empty or not) is actually selected in devices settings page of MSFS ? In other words: if FSUIPC7 is active temporary overwrite MSFS devices settings ? Correct ? Thanks again

Thanks John. Tomorrow morning I will verify Your suggestions. Now is dinner time and i'm going at Home Restaurant (the best and only permitted Restaurant in Italy for now). Bye

I just tried with "Ignore axis" (I just supposed that this will be the purpose) but nothing to do... Ok, i will try again tomorrow morning and report. Bye and thanks

Sorry but I dont understand. I will try to explain my actions and effects: MSFS running FSUIPC7 running Open Assignments >> Axes Assignments Clear & Rescan >> Move TCA Quadrant Throttle Lever nothing change in Joy# and Axis# fields and in numeric fields (under checkbox Raw). tried also this actions with "Ignore Axis" button pressed (Clr Ignores button become active). The field "Profile Specific" with checkbox is inactive. (I will try to create different profiles for different planes due to the actual situation where with turboprop planes the throttle mouvement is very short but ok for jets). If I correctly understand with Clear the Joy and Axis fields become empty and with Rescan this field are filled with Joystick number and axis number if operated. I tried with one empty and with a copy of an existing profile active in MSFS. Please inform me about the correct simulator situation to do axis assignment: Ready on park, running or in pause, in Commands window (Joysticks and devices setting page), or ... As usually thanks for quick answer. Bye

Hi, i try to modify the axis assignments for MSFS via FSUIPC7 because I need to setup a Thrustmaster TCA Airbus Quadrant with Throttles, Reverse etc. As You can see in attached image I', not able to Clear and Rescan because the two fields Joy# and Axis# does not coming empty. In MSFS I make a copy of the default TCA Quadrant profile and I use it. If I unplug the TCA quadrant both fields coming empty (and ready for scanning I suppose) Also I think that the Quadrant, if plugged, sends continously outputs recognized by FSUIPC. Is a workaround for that or is my error in procedure ? Thanks for support

Hi John, thanks but don't waste your time for me only. Some things need your attention and my cabin light can wait. I hope events and offsets for MSFS will be fully avaiable during next year (i'm retired and have a lot of time for waiting). Thanks for Your cooperation and regards.

Hi, You are correct; I also noted this strange behaviour. Bye