guenseli

Have you tried LINDA? LINDA has also a console window which lists you controls, LVars, offsets etc etc. Of course you can filter for custom LVars or controls. You can also set controls with parameters, same with LVars and offsets in the LINDA tracer.

Pete, before I force you to have some work with it, I will have a slight look again over all these ASE/FSUIPC settings again. I will let you know if there's still a need for some features... ;-)

Hello Pete, thanks for reply.. I talk about FSX, sorry. PMDG Addons have the tendency with ASE to get into S-turns, wobbling etc. There are countless threads about it and this could be prevented by enabling FSUIPCs Wind smoothing (Turbulence, gusts, variance) Other addons do not have this behave and therefore I'd like to have this smoothing disabled to get some rough rides with ASE's wind. Of course it is not too much work to enter FSUIPC menu enable and disable it, but I just wanted to ask... If its a huge affort to you, then forget my question ;-) thanks, Günter

Hello Pete, a little idea came to my mind as I was fiddling around with PMDG aircraft and the well known wind problem (which could gladly be solved by FSUIPC) using ASE. But many other addons work flawlessly with no wind settings in FSUIPC and using Active Sky. (This is no rant to ASE nor to PMDG!!) Could it be possible to have the wind smoothing options tied to to a specific addon? Like it is currently possible with buttons axes, calibration etc??? This would be a great feature if FSUIPC could set wind smooting automatically for PMDG and disable it for other addons, for example. Is such a feature possible to implement? Many thanks, Günter

no, unfortunately not - just 30 hours after release, after the "server hack" But it was really easy to fiddle the variables and controls out with LINDA. It is unbelieveable how easy such things are now. Just looked it up: we have about 300 functions now :wink: All credits go here to Artem Crum which made a brilliant tool!!!

Pete, allow me, to make a bit of advertisement for LINDA again... The last days we fiddles out countless functions which are already working with LINDA and could be assigned to any Joystick (HID Device) and the MCP Combo. We have Autopilot fully working, EFIS, lights in and out, , Transponder, Autobreak, Gear, Fuel, Engine start, APU etc etc ... LINDA is awaiting you :wink:

We are proud to announce the relase of LINDA! LINDA is the Lua Integrated Non-complex Device Assigning Tool for FSX. Developed by Artem Crum was LINDA growing over the last month from a few LUA scriptings to a complete Interface with many useful tools and abilities! - With LINDA you could easily assign any of your Joysticks/HID Devices via a simple pop-up menu - easy assigning with one click of all FSX controls - Theres already a set of LUA scripts integrated so can assign special functions for several addons, like PMDG MD11/JS41 or A2A Accusim aircraft, IFly737 etc (you can assign these functions as easy as normal commands: simple click into the pop-up) - VRInsights MCP Combo is fully supported and LINDA added much more features to the combo, like enhanced display possibilities, radio mode button toggles Radio DME/ADF/VOR sounds, several modes for each part of the combo. - Easy changing and assigning of controls and functions (simple pop-up click) - No SerialFB and Keymapper needed any longer (but you could run it if you use other VRInsight devices), No VSPE needed. - LINDA should be a platform for creating and gathering LUA scripts for advanced addons - LINDA has several useful tools implemented so that LUA hunting and creating functions for advanced addons would be a lot easier! That just a few features ... read more in the LINDA forum at AVSIM, please For any questions about LINDA please use also these LINDA forums ... Oh, nearly forgot it ... LINDA is freeware! I hope we could see you as new LINDA users, soon :wink: Thanks for reading! Günter LINDA needs a registered copy of FSUIPC!

A yes: I forget this from time to time :oops: will do so and have a look if I find something!!! thanks!

I have another question, Pete! Searched through FSX controls and offsets, but I can't find how to toggle the switch between VOR1/ADF1 and VOR2/ADF2 at the FSX default 737 VOR/ADFR pointer gauge. Hope you know what I mean. Its the gauge who is showing the direction to the setted VOR or ADF. And you can toggle if VOR or ADF should be shown... Can't find any settings for this...? Many thanks again, Günter

Hi Pete, thansk for your detailed answer! Helped a lot! Yes, I thought about that.... just wanted to know if I have overseen some "hidden" function... many thanks, Günter

Hello Pete, imagine you line up with runway, then you'll press a knob and HDG bug is aligned with the current planes HDG is there any control or offset to have the HDG bug aligned with the current planes direction? many thanks, Günter

Many thanks, Pete! should I let the simconnect.log still be running the next days till we maybe get another failure???

First, I try to answer your question... hopefully easin your confusion ;-) I have one found in the "Files" folder, but no one in the german "Dateien" folder. And I realised, that an ini file in the english folder doesn't do anything! Of course I used this simconnect.ini from your FAQ "Logging Simconnect" I have just posted the code of the ini I found for your interest. I don't know from where and and why it is there. But ok, as it is useless, we can forget about it... indeed you are right: I couldn't say for sure which version it was... sorry. Could be 4.667 also.. maybe I missed the 4.699 but couldn't say it... I have now changed the FSUIPC entry in the Dll.xml to the last position, but FSX/FSUIPC is working as it should. FSUIPC is working and in the menu... I have NOT used your 4.70b till now! And yes, the simconnect.log is from a proper loading of FSUIPC and all Dll's are loaded right in the sim. Since the last failures I haven't had a issue with FSUIPC... after changing FSUIPC position in the Dll.xml. But obvisously it was maybe just a coincidence...? What should I do now? Should I let run the simconnect log the next days (hoping I could catch a failure)? (this would be a very big log file then in the end or not?) Should I install the 4.70b anyway??

<?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>dll.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>FSUIPC 4</Name> <Disabled>False</Disabled> <Path>Modules\FSUIPC4.dll</Path> </Launch.Addon> <Launch.Addon> <Name>Object Placement Tool</Name> <Disabled>True</Disabled> <ManualLoad>False</ManualLoad> <Path>..\Microsoft Flight Simulator X SDK\SDK\Mission Creation Kit\object_placement.dll</Path> </Launch.Addon> <Launch.Addon> <Name>Traffic Toolbox</Name> <Disabled>True</Disabled> <ManualLoad>False</ManualLoad> <Path>..\Microsoft Flight Simulator X SDK\SDK\Environment Kit\Traffic Toolbox SDK\traffictoolbox.dll</Path> </Launch.Addon> <Launch.Addon> <Name>Visual Effects Tool</Name> <Disabled>True</Disabled> <ManualLoad>False</ManualLoad> <Path>..\Microsoft Flight Simulator X SDK\SDK\Environment Kit\Special Effects SDK\visualfxtool.dll</Path> </Launch.Addon> <Launch.Addon> <Name>PMDG Options</Name> <Disabled>False</Disabled> <Path>PMDG\DLLs\PMDGOptions.dll</Path> </Launch.Addon> <Launch.Addon> <Name>PMDG Events</Name> <Disabled>False</Disabled> <Path>PMDG\DLLs\PMDGEvents.dll</Path> </Launch.Addon> <Launch.Addon> <Name>PMDG Sounds</Name> <Disabled>False</Disabled> <Path>PMDG\DLLs\PMDGSounds.dll</Path> </Launch.Addon> <Launch.Addon> <Name>VistaMare Core</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>VistaMare\ViMaCoreX.dll</Path> </Launch.Addon> <Launch.Addon> <Name>FSLOptions</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>FSLabs\DLLs\FSLOptions.dll</Path> </Launch.Addon> <Launch.Addon> <Name>FSLEvents</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>FSLabs\DLLs\FSLEvents.dll</Path> </Launch.Addon> <Launch.Addon> <Name>FSLSounds</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>FSLabs\DLLs\FSLSounds.dll</Path> </Launch.Addon> <Launch.Addon> <Name>Level-D Simulations</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>Modules\LVLD.dll</Path> </Launch.Addon> <Launch.Addon> <Name>Kokpit</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>SimObjects\Airplanes\HUGHES_H1B\panel\Cockpit_Sound.dll</Path> <DllStartName>module_init</DllStartName> <DllStopName>module_deinit</DllStopName> </Launch.Addon> </SimBase.Document> just for your interest: that is the old simconnect.ini. I have changed this to your suggestions in the simconnect logging thread. [SimConnect] level=off console=0 ;OutputDebugString=0 ;file=c:\SimConnect%03u.log ;file_next_index=1 ;RedirectStdOutToConsole=0 I will send you a mail with the simconnect.log file immediatelly... I have had Active sky Evolution activated and started FSX for one time and a sidenote: if you have a german OS you will have another folder "Flight Simulator X-Dateien" beside the english Flight Simulator X Files" The modified simconnect.ini have to be placed in the german "Dateien" folder. Maybe in other languages theres a similar difference... Günter

I have had the same issue yesterday: installed 4.70 just over my existing 4.6X (latest and last incremental update) First flights where good, everything fine - FSX started and closed several times, than suddenly after a new start FSUIPC was gone. Next time I was restarting FSX FSUIPC was there again, but then after that it was gone "forever". I "rearanged" the DLL.XML, deleted the "[trusted] section in the FSX.cfg, copied in the FSUIPC part from an old backup - without effort. What helped was to copy the FSUIPC code at the first place of the Dll.xml. Since then it is working without any problems.... Günter edit: system: FSX with acceleration Win7 with Admin rights and UAC off.

Look into this thread. I have had the similar question once. In this thread you will find the solution for editing the *.ini file: http://forum.simflight.com/topic/63110-little-lua-help-please/page__view__findpost__p__401478

Ah ok. As you see I haven't understood it 100% "if param == 1 then" is what I really wanted...

Hi Pete, now, a few days later I have "understood" now the function stuff and especially the event.param one. This is a little testscript which is working as it should and I'm proud of :wink: function Test(param) if ipcPARAM == 1 then ipc.display("parameter 1") elseif ipcPARAM == 2 then ipc.display("parameter 2") end end event.param("Test") Next hard work will be to rewrite my current LUA scripts to this method, especial the J41 LUA ... Thanks again very much much for your patience and help! Günter

Yes, you are absolutelly right!!! But I think you have helped me now with your explaining to start with that stuff. Will try and see what happens if I have time for... Will report back!!! thanks a lot! Günter

Many thanks for explaining, Pete!!! I understand the system behind it and it looks much better, yes. Just one question is left: How do I assign now a button (I don't want to do that in the script itself with event.button)? Is if ipcPARAM == 10 then something like if event.param == 10 then or how do I do that?

Hello Pete, thanks for answering! Yes, SinglePlayer...maybe thats just a german term... It never came up again... but just very seldom from time to time. And not in every case I could be sure thats cause of the LUAs I never had it till yesterday with my new PC. And Online in IVAO yesterday it happened twice. So I forced it to happen in "SP" (offline) too to be sure that was not caused by the IVAP software. No... :oops: But I ignrore new things as long as I don't need them urgently... :wink: You know, I'm no programmer! I will have a look into this... but I need some examples, please! Are there any examples you can point me to, please? Indeed because I thought that solves this crashing. As you explain it, it makes things obvisiously worser. Will immediatelly delete them! Maybe that is enough to solve my problem, otherwise I will "outsource" the dialing code from the main LUA. And I will have a look into the event-stuff, of course.

Hello Pete, I have a LUA script for the PMDG J41. I can make FSX reproduceable crash when dialing on my MCP combo. I can dial longer in SP mode, but Online on IVAO it crashed two times today after some dials of ALT or HDG. Never have noticed the crash in SP Mode, but it needs a really long dial before it is crashing, I have found out now. So its possible in SP, too... This issue was also with my old PC, but I have thought it is solved with the new one: I7 930@ 4,4 Ghz, GTX470, 6 Gig Ram 1600 I have of course installed the latest FSUIPC 4.661 Here is the relevant LUA script part: -- ALT plus elseif ipcPARAM == 10 then Var = ipc.readLvar("IrcAltSelKnob") if Var >= 100 then Var = 1 end ipc.writeLvar("IrcAltSelKnob", Var+1) ipc.control(66587,3921) ipc.control(66587,8031) ipc.sleep(40) -- ALT plus fast elseif ipcPARAM == 11 then Var = ipc.readLvar("IrcAltSelKnob") if Var >= 100 then Var = 1 end ipc.writeLvar("IrcAltSelKnob", Var+5) for n=1, 10, 1 do ipc.control(66587,3921) end ipc.control(66587,8031) ipc.sleep(40) -- ALT minus elseif ipcPARAM == 12 then Var = ipc.readLvar("IrcAltSelKnob") if Var <= 1 then Var = 100 end ipc.writeLvar("IrcAltSelKnob", Var-1) ipc.control(66587,3920) ipc.control(66587,8031) ipc.sleep(40) -- ALT minus fast elseif ipcPARAM == 13 then Var = ipc.readLvar("IrcAltSelKnob") if Var <= 1 then Var = 100 end ipc.writeLvar("IrcAltSelKnob", Var-5) for n=1, 10, 1 do ipc.control(66587,3920) end ipc.control(66587,8031) ipc.sleep(40) -- HDG plus elseif ipcPARAM == 15 then ipc.control(66587,26902) ipc.control(66587,8031) ipc.sleep(50) -- HDG plus fast elseif ipcPARAM == 16 then for n=1, 10, 1 do ipc.control(66587,26902) end ipc.control(66587,8031) ipc.sleep(50) -- HDG minus elseif ipcPARAM == 17 then ipc.control(66587,26901) ipc.control(66587,8031) ipc.sleep(50) -- HDG minus fast elseif ipcPARAM == 18 then for n=1, 10, 1 do ipc.control(66587,26901) end ipc.control(66587,8031) ipc.sleep(50) You can find the whole (long) LUA Script in your "User contributions" Do you think, the complete LUA is too big? So the rotary parts should be layed out in an extra, shorter LUA? Could that help? Or do have any other idea what could lead to the FSX crash...? Btw: there's no warning or LOG noted about. FSx is still hanging and crashes after a while. Hope you have a good idea (as always)! Many thanks, Günter

Hello, thanks very much! foru your question: very first topic in the FAQ section here in the forum: tutorial-how-to-get-lua-vars-or-commands-out-of-fs

LUA script for the famous A2A Accusim Spifire. -- List of parameters -- -- 1 Generator on -- 2 Generator off -- 3 Generator Toggle -- -- 4 Primerstate open -- 5 Primerstate closed -- 6 Primerstate toggle -- 7 Priming -- 8 Primer releasing and priming -- -- 9 open Lid and starter ON -- 10 starter OFF and close Lid -- -- 15 Boost cut out off -- 16 Boost cut out on -- 17 Boost cut out toggle -- -- 20 Mixture ratio lever weak -- 21 Mixture ratio lever rich -- 22 Mixture ratio lever toggle -- -- 23 Top (Left) Fuel Selector ON -- 24 Top (Left) Fuel Selector OFF -- 25 Top (Left) Fuel Selector toggle -- -- 26 Bottom (right) Fuel Selector ON -- 27 Bottom (right) Fuel Selector Off -- 28 Bottom (right) Fuel Selector toggle -- -- 30 Ventral recog light "Beacon" steady -- 31 Ventral recog light "Beacon" OFF -- 32 Ventral recog light "Beacon" morse -- -- 33 dorsal recog light steady -- 34 dorsal recog light OFF -- 35 dorsal recog light morse -- -- 36 morse key -- 37 morse key on -- 38 morse key off -- -- 40 Landing light extending -- 41 Landing light retracting -- 42 Landing light ext/retr toggle -- -- 43 Left Landing light ON -- 44 Left Landing light OFF -- 45 Right Landing light ON -- 46 Right Landing light OFF -- -- 50 Left Landing light extend and ON -- 51 Left Landing light retract and OFF -- 52 right Landing light extend and ON -- 53 right Landing light retract and OFF -- -- 55 LL Beam up -- 56 LL Beam down -- -- 60 Defroster inc -- 61 Defroster dec -- -- 62 Gunsight ON -- 63 Gunsight OFF -- 64 Gunsight Toggle -- -- 70 Oxy Alt Valve set inc -- 71 Oxy Alt Valve set dec -- 72 Oxymask and valve on/open -- 73 Oxymask and valve off/closed -- -- 80 Bottom Tank Fuel state (for 5 seconds) -- 81 Bottom Tank Fuel state ON (for ON/OFF toggle switches) -- 82 Bottom Tank Fuel state OFF (for ON/OFF toggle switches) -- -- 83 top Tank Fuel state (for 5 seconds) -- 84 top Tank Fuel state ON (for ON/OFF toggle switches) -- 85 top Tank Fuel state OFF (for ON/OFF toggle switches) -- -- 90 Engine cut out on -- 91 Engine cut out off -- 92 Engine cut out toggle -- -- 95 Engine cartridge reload switch or starting magneto (depends on model) -- --100 APU on --101 APU ott --102 APU toggle -- -- 105 Cabin Vent inc -- 106 Cabin Vent dec -- -- 110 Landing gear silencer switch Have fun! -- A2A Spitfire accusim -- LUA Script V 1.0 -- updated: Sunday, 24th Oct -- -- (C) Guenter Steiner/guenseli -- List of parameters -- -- 1 Generator on -- 2 Generator off -- 3 Generator Toggle -- -- 4 Primerstate open -- 5 Primerstate closed -- 6 Primerstate toggle -- 7 Priming -- 8 Primer releasing and priming -- -- 9 open Lid and starter ON -- 10 starter OFF and close Lid -- -- 15 Boost cut out off -- 16 Boost cut out on -- 17 Boost cut out toggle -- -- 20 Mixture ratio lever weak -- 21 Mixture ratio lever rich -- 22 Mixture ratio lever toggle -- -- 23 Top (Left) Fuel Selector ON -- 24 Top (Left) Fuel Selector OFF -- 25 Top (Left) Fuel Selector toggle -- -- 26 Bottom (right) Fuel Selector ON -- 27 Bottom (right) Fuel Selector Off -- 28 Bottom (right) Fuel Selector toggle -- -- 30 Ventral recog light "Beacon" steady -- 31 Ventral recog light "Beacon" OFF -- 32 Ventral recog light "Beacon" morse -- -- 33 dorsal recog light steady -- 34 dorsal recog light OFF -- 35 dorsal recog light morse -- -- 36 morse key -- 37 morse key on -- 38 morse key off -- -- 40 Landing light extending -- 41 Landing light retracting -- 42 Landing light ext/retr toggle -- -- 43 Left Landing light ON -- 44 Left Landing light OFF -- 45 Right Landing light ON -- 46 Right Landing light OFF -- -- 50 Left Landing light extend and ON -- 51 Left Landing light retract and OFF -- 52 right Landing light extend and ON -- 53 right Landing light retract and OFF -- -- 55 LL Beam up -- 56 LL Beam down -- -- 60 Defroster inc -- 61 Defroster dec -- -- 62 Gunsight ON -- 63 Gunsight OFF -- 64 Gunsight Toggle -- -- 70 Oxy Alt Valve set inc -- 71 Oxy Alt Valve set dec -- 72 Oxymask and valve on/open -- 73 Oxymask and valve off/closed -- -- 80 Bottom Tank Fuel state (for 5 seconds) -- 81 Bottom Tank Fuel state ON (for ON/OFF toggle switches) -- 82 Bottom Tank Fuel state OFF (for ON/OFF toggle switches) -- -- 83 top Tank Fuel state (for 5 seconds) -- 84 top Tank Fuel state ON (for ON/OFF toggle switches) -- 85 top Tank Fuel state OFF (for ON/OFF toggle switches) -- -- 90 Engine cut out on -- 91 Engine cut out off -- 92 Engine cut out toggle -- -- 95 Engine cartridge reload switch or starting magneto (depends on model) -- --100 APU on --101 APU ott --102 APU toggle -- -- 105 Cabin Vent inc -- 106 Cabin Vent dec -- -- 110 Landing gear silencer switch -------------------------------------------------------------- GEN -- Generator ON if ipcPARAM == 1 then LVarSet = "L:Eng1_GeneratorSwitch" ipc.writeLvar(LVarSet, 1) end -- Generator off if ipcPARAM == 2 then LVarSet = "L:Eng1_GeneratorSwitch" ipc.writeLvar(LVarSet, 0) end -- Generator toggle if ipcPARAM == 3 then LVarSet = "L:Eng1_GeneratorSwitch" val = 0 if ipc.readLvar(LVarSet) == 0 then val = 1 end ipc.writeLvar(LVarSet, val) end -------------------------------------------------------------- Primer -- Primerstate open if ipcPARAM == 4 then LVarSet = "L:PrimerState" ipc.writeLvar(LVarSet, 1) end -- Primerstate closed if ipcPARAM == 5 then LVarSet = "L:PrimerState" ipc.writeLvar(LVarSet, 0) end -- Primerstate toggle if ipcPARAM == 6 then LVarSet = "L:PrimerState" val = 0 if ipc.readLvar(LVarSet) == 0 then val = 1 end ipc.writeLvar(LVarSet, val) end -- Priming if ipcPARAM == 7 then LVarSet = "L:PrimerState" ipc.writeLvar(LVarSet, 2) end -- Primer releasing and priming if ipcPARAM == 8 then LVarSet = "L:PrimerState" if ipc.readLvar(LVarSet) == 0 then ipc.writeLvar(LVarSet, 1) ipc.sleep(1300) end ipc.writeLvar(LVarSet, 2) end -------------------------------------------------------------- Starter -- open Lid and starter ON if ipcPARAM == 9 then ipc.writeLvar("L:Eng1StarterSwitchLid", 1) ipc.sleep(200) ipc.writeLvar("L:Eng1StarterSwitch", 1) end -- starter OFF and close Lid if ipcPARAM == 10 then ipc.writeLvar("L:Eng1StarterSwitch", 0) ipc.sleep(500) ipc.writeLvar("L:Eng1StarterSwitchLid", 0) end -------------------------------------------------------------- Boost Cut out -- Boost cut out off if ipcPARAM == 15 then LVarSet = "L:BoostCutout" ipc.writeLvar(LVarSet, 1) end -- Boost cut out on if ipcPARAM == 16 then LVarSet = "L:BoostCutout" ipc.writeLvar(LVarSet, 0) end -- Boost cut out toggle if ipcPARAM == 17 then LVarSet = "L:BoostCutout" val = 0 if ipc.readLvar(LVarSet) == 0 then val = 1 end ipc.writeLvar(LVarSet, val) end -------------------------------------------------------------- Mixture -- Mixture ratio lever weak if ipcPARAM == 20 then LVarSet = "L:MixtureRatioLever1Position" ipc.writeLvar(LVarSet, 1) end -- Mixture ratio lever rich if ipcPARAM == 21 then LVarSet = "L:MixtureRatioLever1Position" ipc.writeLvar(LVarSet, 0) end -- Mixture ratio lever toggle if ipcPARAM == 22 then LVarSet = "L:MixtureRatioLever1Position" val = 0 if ipc.readLvar(LVarSet) == 0 then val = 1 end ipc.writeLvar(LVarSet, val) end -------------------------------------------------------------- Fuel Selectors -- Top (Left) Fuel Selector ON if ipcPARAM == 23 then LVarSet = "L:FuelSelTop" ipc.writeLvar(LVarSet, 1) end -- Top (Left) Fuel Selector off if ipcPARAM == 24 then LVarSet = "L:FuelSelTop" ipc.writeLvar(LVarSet, 0) end -- Top (Left) Fuel Selector toggle if ipcPARAM == 25 then LVarSet = "L:FuelSelTop" val = 0 if ipc.readLvar(LVarSet) == 0 then val = 1 end ipc.writeLvar(LVarSet, val) end -------------------------------- -- Bottom (right) Fuel Selector ON if ipcPARAM == 26 then LVarSet = "L:FuelSelBott" ipc.writeLvar(LVarSet, 1) end -- Bottom (right) Fuel Selector off if ipcPARAM == 27 then LVarSet = "L:FuelSelBott" ipc.writeLvar(LVarSet, 0) end -- Bottom (right) Fuel Selector toggle if ipcPARAM == 28 then LVarSet = "L:FuelSelBott" val = 0 if ipc.readLvar(LVarSet) == 0 then val = 1 end ipc.writeLvar(LVarSet, val) end -------------------------------------------------------------- lights -- Ventral recog light "Beacon" steady if ipcPARAM == 30 then LVarSet = "L:LightRecogVentralSwitch" ipc.writeLvar(LVarSet, 0) end -- Ventral recog light "Beacon" off if ipcPARAM == 31 then LVarSet = "L:LightRecogVentralSwitch" ipc.writeLvar(LVarSet, 1) end -- Ventral recog light "Beacon" morse if ipcPARAM == 32 then LVarSet = "L:LightRecogVentralSwitch" ipc.writeLvar(LVarSet, 2) end ---------------------------------------------- -- dorsal recog light steady if ipcPARAM == 33 then LVarSet = "L:LightRecogDorsalSwitch" ipc.writeLvar(LVarSet, 0) end -- dorsal recog light off if ipcPARAM == 34 then LVarSet = "L:LightRecogDorsalSwitch" ipc.writeLvar(LVarSet, 1) end -- dorsal recog light morse if ipcPARAM == 35 then LVarSet = "L:LightRecogDorsalSwitch" ipc.writeLvar(LVarSet, 2) end ---------------------------------------------- morse -- morse key if ipcPARAM == 36 then LVarSet = "L:KeyMorseArm" ipc.writeLvar(LVarSet, 1) ipc.sleep(100) ipc.writeLvar(LVarSet, 0) end -- morse key on if ipcPARAM == 37 then LVarSet = "L:KeyMorseArm" ipc.writeLvar(LVarSet, 1) end -- morse key off if ipcPARAM == 38 then LVarSet = "L:KeyMorseArm" ipc.writeLvar(LVarSet, 0) end ---------------------------------------------- -- Landing light extending if ipcPARAM == 40 then LVarSet = "L:LandingLightExtendSwitch" ipc.writeLvar(LVarSet, 1) end -- Landing light retracting if ipcPARAM == 41 then LVarSet = "L:LandingLightExtendSwitch" ipc.writeLvar(LVarSet, 0) end -- Landing light ext/retr toggle if ipcPARAM == 42 then LVarSet = "L:LandingLightExtendSwitch" val = 0 if ipc.readLvar(LVarSet) == 0 then val = 1 end ipc.writeLvar(LVarSet, val) end ---------------------------------------------- -- Left Landing light ON if ipcPARAM == 43 then LVarSet = "L:LandingLightSwitch" ipc.writeLvar(LVarSet, 0) end -- Left Landing light OFF if ipcPARAM == 44 then LVarSet = "L:LandingLightSwitch" ipc.writeLvar(LVarSet, 1) end -- Right Landing light ON if ipcPARAM == 45 then LVarSet = "L:LandingLightSwitch" ipc.writeLvar(LVarSet, 2) end -- Right Landing light OFF if ipcPARAM == 46 then LVarSet = "L:LandingLightSwitch" ipc.writeLvar(LVarSet, 1) end ---------------------------------------------- -- Left Landing light extend and ON if ipcPARAM == 50 then ipc.writeLvar("L:LandingLightExtendSwitch", 1) ipc.sleep(100) ipc.writeLvar("L:LandingLightSwitch", 0) end -- left Landing light retract and OFF if ipcPARAM == 51 then ipc.writeLvar("L:LandingLightSwitch", 1) ipc.sleep(100) ipc.writeLvar("L:LandingLightExtendSwitch", 0) end -- right Landing light extend and ON if ipcPARAM == 52 then ipc.writeLvar("L:LandingLightExtendSwitch", 1) ipc.sleep(100) ipc.writeLvar("L:LandingLightSwitch", 2) end -- right Landing light retract and OFF if ipcPARAM == 53 then ipc.writeLvar("L:LandingLightSwitch", 1) ipc.sleep(100) ipc.writeLvar("L:LandingLightExtendSwitch", 0) end ---------------------------------------- -- LL Beam up if ipcPARAM == 55 then LLBeam = "L:LeverLandingLightBeam" Var = ipc.readLvar(LLBeam) if Var < 100 then Var = Var + 1 ipc.sleep(1) end ipc.writeLvar(LLBeam, Var) end -- LL Beam down if ipcPARAM == 56 then LLBeam = "L:LeverLandingLightBeam" Var = ipc.readLvar(LLBeam) if Var > 0 then Var = Var - 1 ipc.sleep(1) end ipc.writeLvar(LLBeam, Var) end -------------------------------------------------------------- Defroster -- defroster inc if ipcPARAM == 60 then Def = "L:WindowDefrosterSwitch" ipc.writeLvar(Def, 1) end -- defroster inc --if ipcPARAM == 60 then -- Def = "L:WindowDefrosterControlKnob" -- Var = ipc.readLvar(Def) -- if Var < 100 then -- Var = Var + 10 -- ipc.sleep(1) -- end -- ipc.writeLvar(Def, Var) --end -- defroster dec if ipcPARAM == 61 then Def = "L:WindowDefrosterSwitch" ipc.writeLvar(Def, 0) end -------------------------------------------------------------- Gunsight switch -- Gunsight ON if ipcPARAM == 62 then LVarSet = "L:GunSightSwitchOn" ipc.writeLvar(LVarSet, 1) end -- Gunsight off if ipcPARAM == 63 then LVarSet = "L:GunSightSwitchOn" ipc.writeLvar(LVarSet, 0) end -- Gunsight toggle if ipcPARAM == 64 then LVarSet = "L:GunSightSwitchOn" val = 0 if ipc.readLvar(LVarSet) == 0 then val = 1 end ipc.writeLvar(LVarSet, val) end -------------------------------------------------------------- oxygen -- oxy alt set inc if ipcPARAM == 70 then Oxy = "L:OxyAltSetValve" Var = ipc.readLvar(Oxy) if Var < 100 then Var = Var + 1 ipc.sleep(1) end ipc.writeLvar(Oxy, Var) end -- oxy alt set dec if ipcPARAM == 71 then Oxy = "L:OxyAltSetValve" Var = ipc.readLvar(Oxy) if Var > 0 then Var = Var - 1 ipc.sleep(1) end ipc.writeLvar(Oxy, Var) end -------------------------------------------------------------- Oxymask and valve -- Oxy mask and valve ON if ipcPARAM == 72 then ipc.writeLvar("L:SystemCondValueFSX", 1) ipc.writeLvar("L:SystemCondSelectFSX", 58) ipc.sleep(1000) if ipc.readLvar("L:OxyMaster") >= 0 then i = 0 while i < 100 do ipc.writeLvar("L:OxyMaster", i) ipc.sleep(1) i = i + 10 end end end -- Oxy mask and valve off if ipcPARAM == 73 then ipc.writeLvar("L:SystemCondValueFSX", 0) ipc.writeLvar("L:SystemCondSelectFSX", 58) ipc.sleep(1000) if ipc.readLvar("L:OxyMaster") <= 100 then i = 100 while i >= 0 do ipc.writeLvar("L:OxyMaster", i) ipc.sleep(1) i = i - 10 end end end -------------------------------------------------------------- Bottom tank state -- Bottom tank state for 5 seconds ON if ipcPARAM == 80 then LVarSet = "L:BottTankOn" ipc.writeLvar(LVarSet, 1) ipc.sleep(5000) ipc.writeLvar(LVarSet, 0) end -- Bottom tank state ON if ipcPARAM == 81 then LVarSet = "L:BottTankOn" ipc.writeLvar(LVarSet, 1) end -- Bottom tank state OFF if ipcPARAM == 82 then LVarSet = "L:BottTankOn" ipc.writeLvar(LVarSet, 0) end -------------------------------------------------------------- Top tank state -- Top tank state for 5 seconds ON if ipcPARAM == 83 then LVarSet = "L:TopTankOn" ipc.writeLvar(LVarSet, 1) ipc.sleep(5000) ipc.writeLvar(LVarSet, 0) end -- Top tank state ON if ipcPARAM == 84 then LVarSet = "L:TopTankOn" ipc.writeLvar(LVarSet, 1) end -- Top tank state OFF if ipcPARAM == 85 then LVarSet = "L:TopTankOn" ipc.writeLvar(LVarSet, 0) end -------------------------------------------------------------- Engine cut out -- Engine cut out ON if ipcPARAM == 90 then LVarSet = "L:SlowRunningCutoutSwitch" ipc.writeLvar(LVarSet, 1) end -- Engine cut out off if ipcPARAM == 91 then LVarSet = "L:SlowRunningCutoutSwitch" ipc.writeLvar(LVarSet, 0) end -- Engine cut out toggle if ipcPARAM == 92 then LVarSet = "L:SlowRunningCutoutSwitch" val = 0 if ipc.readLvar(LVarSet) == 0 then val = 1 end ipc.writeLvar(LVarSet, val) end -------------------------------------------------------------- Engine cartridge reload switch if ipcPARAM == 95 then acftname = ipc.readSTR(0x3D00, 35) if string.find(acftname,"Mk Ia",0,true) then LVarSet = "Eng1StartingMagneto" val = 0 if ipc.readLvar(LVarSet) == 0 then val = 1 end ipc.writeLvar(LVarSet, val) else LVarSet = "L:Eng1StarterCartridgeReloadSwitch" ipc.writeLvar(LVarSet, 1) end --ipc.display(acftname) --ipc.sleep(2000) end -------------------------------------------------------------- APU -- APU ON if ipcPARAM == 100 then LVarSet = "L:APUSwitch" ipc.writeLvar(LVarSet, 1) ipc.writeLvar("L:SystemCondValueFSX", 1) ipc.writeLvar("L:SystemCondSelectFSX", 53) end -- APU off if ipcPARAM == 101 then LVarSet = "L:APUSwitch" ipc.writeLvar(LVarSet, 0) ipc.writeLvar("L:SystemCondValueFSX", 0) ipc.writeLvar("L:SystemCondSelectFSX", 53) end -- APU toggle if ipcPARAM == 102 then LVarSet = "L:APUSwitch" val = 0 if ipc.readLvar(LVarSet) == 0 then val = 1 end ipc.writeLvar(LVarSet, val) ipc.writeLvar("L:SystemCondValueFSX", val) ipc.writeLvar("L:SystemCondSelectFSX", 53) end -------------------------------------------------------------- Cabin Vent -- vent inc if ipcPARAM == 105 then Def = "L:CabinVent" Var = ipc.readLvar(Def) if Var < 100 then Var = Var + 10 ipc.sleep(1) end ipc.writeLvar(Def, Var) end -- vent dec if ipcPARAM == 106 then Def = "L:CabinVent" Var = ipc.readLvar(Def) if Var > 0 then Var = Var - 10 ipc.sleep(1) end ipc.writeLvar(Def, Var) end -------------------------------------------------------------- Landing gear silencer -- LG silencer ON if ipcPARAM == 110 then LVarSet = "L:GearHornSilencerSwitch" ipc.writeLvar(LVarSet, 1) end

Unfortunatelly the Concorde was the most difficult addon to get out LUA variables or controls. The devs ignored my begging over month so here is what I have found and it is not working correct for 100% (talking about the animations of some switches etc) The functions do what they should do. Here is the list of the parameters: -- FSLabs Concorde -- 10 AP1 -- 11 AP2 -- 12 ATHR1 -- 13 ATHR2 -- 14 FD1 -- 15 FD2 -- -- -- 20 INS -- 21 TRK HDG (sel) -- 22 HDG (hold) -- 23 TURB -- 24 Pitch hold -- 25 Mach hold (right side) -- 26 Max climb -- 27 IAS Hold (Right side) -- 28 ALT hold -- 29 Bach Beam -- 30 VOR/LOC -- 31 LAND -- 32 Glide -- 33 Max Cruise -- 34 vert Speed -- 35 ALT ACQ -- 36 Mach hold (left side) -- 37 IAS Hold (left side) -- 38 IAS ACQ -- -- 40 Alt inc -- 41 Alt dec -- -- 45 HDG left inc -- 46 HDG left dec -- 47 HDG right inc -- 48 HDG right dec -- -- 50 CRS left inc -- 51 CRS left dec -- 52 CRS right inc -- 53 CRS right dec -- -- 55 VS Pitch inc -- 56 VS Pitch dec -- 60 SPD inc -- 61 SPD dec -- -- 70 RAD/INS 1 (left) toggle -- 71 RAD/INS 2 (right) toggle -- -- 80 reheat eng1 inc -- 81 reheat eng1 dec -- 82 reheat eng2 inc -- 83 reheat eng2 dec -- 84 reheat eng3 inc -- 85 reheat eng3 dec -- 86 reheat eng4 inc -- 87 reheat eng4 dec -- -- 90 Landing lights on -- 91 Landing lights off -- -- 92 Taxi lights on -- 93 Taxi lights off -- -- 94 Taxi turn lights toggle -- -- 100 Instr. lights inc -- 101 Instr. lights dec -- ----------------------Panels -- 200 Brake, Cabin Pressure, Engine control -- 201 Air Intakes, sec eng controls -- 202 upper fuel, lower fuel, nozzle -- 203 air bleed, hydraulic -- 204 temperature control, engine stack -- 205 light controls (Capt, FO, engineer) -- 206 AC and DC -- 207 CDU1 +2 -- 208 overhead And here is the hole code: Have fun! -- FSLabs Concorde -- 10 AP1 -- 11 AP2 -- 12 ATHR1 -- 13 ATHR2 -- 14 FD1 -- 15 FD2 -- -- -- 20 INS -- 21 TRK HDG (sel) -- 22 HDG (hold) -- 23 TURB -- 24 Pitch hold -- 25 Mach hold (right side) -- 26 Max climb -- 27 IAS Hold (Right side) -- 28 ALT hold -- 29 Bach Beam -- 30 VOR/LOC -- 31 LAND -- 32 Glide -- 33 Max Cruise -- 34 vert Speed -- 35 ALT ACQ -- 36 Mach hold (left side) -- 37 IAS Hold (left side) -- 38 IAS ACQ -- -- 40 Alt inc -- 41 Alt dec -- -- 45 HDG left inc -- 46 HDG left dec -- 47 HDG right inc -- 48 HDG right dec -- -- 50 CRS left inc -- 51 CRS left dec -- 52 CRS right inc -- 53 CRS right dec -- -- 55 VS Pitch inc -- 56 VS Pitch dec -- 60 SPD inc -- 61 SPD dec -- -- 70 RAD/INS 1 (left) toggle -- 71 RAD/INS 2 (right) toggle -- -- 80 reheat eng1 inc -- 81 reheat eng1 dec -- 82 reheat eng2 inc -- 83 reheat eng2 dec -- 84 reheat eng3 inc -- 85 reheat eng3 dec -- 86 reheat eng4 inc -- 87 reheat eng4 dec -- -- 90 Landing lights on -- 91 Landing lights off -- -- 92 Taxi lights on -- 93 Taxi lights off -- -- 94 Taxi turn lights toggle -- -- 100 Instr. lights inc -- 101 Instr. lights dec -- ----------------------Panels -- 200 Brake, Cabin Pressure, Engine control -- 201 Air Intakes, sec eng controls -- 202 upper fuel, lower fuel, nozzle -- 203 air bleed, hydraulic -- 204 temperature control, engine stack -- 205 light controls (Capt, FO, engineer) -- 206 AC and DC -- 207 CDU1 +2 -- 208 overhead ------------------------------------------------------------AUTOPILOT ------------------------------------------------------------ -- AP 1 if ipcPARAM == 10 then ipc.control(66587,71084) -- AP 2 elseif ipcPARAM == 11 then ipc.control(66587,71085) ------------------------------------------------------------ATHR -- ATHR 1 elseif ipcPARAM == 12 then ipc.control(66587,71080) -- ATHR 2 elseif ipcPARAM == 13 then ipc.control(66587,71081) ------------------------------------------------------------FD -- FD1 elseif ipcPARAM == 14 then ipc.control(66587,71082) -- FD2 elseif ipcPARAM == 15 then ipc.control(66587,71083) ----------------------------------------------------------------Ap functions -- INS elseif ipcPARAM == 20 then ipc.control(66587,71063) -- TRK HDG (sel) elseif ipcPARAM == 21 then ipc.control(66587,71065) -- HDG (hold) elseif ipcPARAM == 22 then ipc.control(66587,71067) -- TURB elseif ipcPARAM == 23 then ipc.control(66587,71068) -- Pitch hold elseif ipcPARAM == 24 then ipc.control(66587,71070) -- Mach hold (right side) elseif ipcPARAM == 25 then ipc.control(66587,71072) -- Max climb elseif ipcPARAM == 26 then ipc.control(66587,71074) -- IAS hold (right side) elseif ipcPARAM == 27 then ipc.control(66587,71076) -- Alt hold elseif ipcPARAM == 28 then ipc.control(66587,71078) -- Back Beam elseif ipcPARAM == 29 then ipc.control(66587,71064) -- VOR/LOC elseif ipcPARAM == 30 then ipc.control(66587,71066) -- LAND elseif ipcPARAM == 31 then ipc.control(66587,71071) -- Glide elseif ipcPARAM == 32 then ipc.control(66587,71073) -- Max cruise elseif ipcPARAM == 33 then ipc.control(66587,71075) -- Vert Speed elseif ipcPARAM == 34 then ipc.control(66587,71077) -- ALT ACQ elseif ipcPARAM == 35 then ipc.control(66587,71079) -- MACH hold (left side) elseif ipcPARAM == 36 then ipc.control(66587,71060) -- IAS hold (left side) elseif ipcPARAM == 37 then ipc.control(66587,71061) -- IAS ACQ elseif ipcPARAM == 38 then ipc.control(66587,71062) ----------------------------------------------------------------AP dials -- Alt inc elseif ipcPARAM == 40 then ipc.control(66587,71136) -- Alt dec elseif ipcPARAM == 41 then ipc.control(66587,71135) -- HDG left inc elseif ipcPARAM == 45 then ipc.control(66587,71107) -- HDG left dec elseif ipcPARAM == 46 then ipc.control(66587,71108) -- HDG right inc elseif ipcPARAM == 47 then ipc.control(66587,71129) -- HDG right dec elseif ipcPARAM == 48 then ipc.control(66587,71128) -- CRS left inc elseif ipcPARAM == 50 then ipc.control(66587,71110) -- CRS left dec elseif ipcPARAM == 51 then ipc.control(66587,71109) -- CRS right inc elseif ipcPARAM == 52 then ipc.control(66587,71121) -- CRS right dec elseif ipcPARAM == 53 then ipc.control(66587,71122) -- VS (Pitch) dec elseif ipcPARAM == 57 then ipc.control(66587,73530) -- VS (Pitch) inc elseif ipcPARAM == 55 then ipc.control(66587,73531) -- SPD inc elseif ipcPARAM == 60 then ipc.control(66587,71095) -- SPD dec elseif ipcPARAM == 61 then ipc.control(66587,71096) -- RAD / INS 1 (left) toggle elseif ipcPARAM == 70 then ipc.control(66587,71050) -- RAD / INS 2 (right) toggle elseif ipcPARAM == 71 then ipc.control(66587,71051) ----------------------------------------------------Reheat -- Reheat Eng 1 inc elseif ipcPARAM == 80 then ipc.control(66587,73600) -- Reheat Eng 1 dec elseif ipcPARAM == 81 then ipc.control(66587,73601) -- Reheat Eng 2 inc elseif ipcPARAM == 82 then ipc.control(66587,73605) -- Reheat Eng 2 dec elseif ipcPARAM == 83 then ipc.control(66587,73606) -- Reheat Eng 3 inc elseif ipcPARAM == 84 then ipc.control(66587,73610) -- Reheat Eng 3 dec elseif ipcPARAM == 85 then ipc.control(66587,73611) -- Reheat Eng 4 dec elseif ipcPARAM == 86 then ipc.control(66587,73615) -- Reheat Eng 4 dec elseif ipcPARAM == 87 then ipc.control(66587,73616) ----------------------------------------------------Lights -- Landing lights on elseif ipcPARAM == 90 then ipc.control(66587,75505) ipc.sleep(150) ipc.control(66587,75506) -- Landing lights off elseif ipcPARAM == 91 then ipc.control(66587,75507) ipc.sleep(150) ipc.control(66587,75508) -- Taxi lights on elseif ipcPARAM == 92 then ipc.control(66587,75510) ipc.sleep(150) ipc.control(66587,75511) -- Taxi lights off elseif ipcPARAM == 93 then ipc.control(66587,75512) ipc.sleep(150) ipc.control(66587,75513) -- Taxi turn lights toggle elseif ipcPARAM == 94 then ipc.control(66587,75500) ipc.sleep(100) ipc.control(66587,75499) -- instr lights inc elseif ipcPARAM == 100 then ipc.control(66587,77401) ipc.sleep(10) ipc.control(66587,77411) -- instr lights dec elseif ipcPARAM == 101 then ipc.control(66587,77400) ipc.sleep(10) ipc.control(66587,77410) -- flood light inc elseif ipcPARAM == 102 then ipc.control(66587,75137) -- flood light dec elseif ipcPARAM == 103 then ipc.control(66587,75139) -- flood light full elseif ipcPARAM == 104 then ipc.control(66587,75137) ipc.sleep(10) ipc.control(66587,75137) -- flood light off elseif ipcPARAM == 105 then ipc.control(66587,75139) ipc.sleep(10) ipc.control(66587,75139) -- all console lights on elseif ipcPARAM == 106 then i = 0 while i <= 6 do ipc.control(66587,75141) -- Glareshield ipc.sleep(10) ipc.control(66587,75145) -- centre console ipc.sleep(10) ipc.control(66587,75149) -- centre dash ipc.sleep(10) ipc.control(66587,75153) -- centre console flood ipc.sleep(10) ipc.control(66587,75157) -- roof i = i + 1 end -- all console lights off elseif ipcPARAM == 107 then i = 0 while i <= 6 do ipc.control(66587,75140) -- Glareshield ipc.sleep(10) ipc.control(66587,75144) -- centre console ipc.sleep(10) ipc.control(66587,75148) -- centre dash ipc.sleep(10) ipc.control(66587,75152) -- centre console flood ipc.sleep(10) ipc.control(66587,75156) -- roof i = i + 1 end -- Anti Coll lights toggle elseif ipcPARAM == 110 then ipc.control(66587,75010) -- Nav lights toggle elseif ipcPARAM == 111 then ipc.control(66587,75012) -------------------------------------------------- -- No smoking toggle elseif ipcPARAM == 120 then ipc.control(66587,75047) -- seatbelt toggle elseif ipcPARAM == 121 then ipc.control(66587,75048) -------------------------------------------------- Eng HP Valves -- ENG1 HP Valve ON elseif ipcPARAM == 130 then ipc.control(66587,75082) -- ENG1 HP Valve OFF elseif ipcPARAM == 131 then ipc.control(66587,75083) -- ENG2 HP Valve ON elseif ipcPARAM == 132 then ipc.control(66587,75084) -- ENG2 HP Valve OFF elseif ipcPARAM == 133 then ipc.control(66587,75085) -- ENG3 HP Valve ON elseif ipcPARAM == 134 then ipc.control(66587,75086) -- ENG3 HP Valve OFF elseif ipcPARAM == 135 then ipc.control(66587,75087) -- ENG4 HP Valve ON elseif ipcPARAM == 136 then ipc.control(66587,75088) -- ENG4 HP Valve OFF elseif ipcPARAM == 137 then ipc.control(66587,75089) -------------------------------------------------- little white AP switches on -- little white AP switches on elseif ipcPARAM == 140 then ipc.control(66587,75408) ipc.sleep(125) ipc.control(66587,75410) ipc.sleep(125) ipc.control(66587,75412) ipc.sleep(125) ipc.control(66587,75414) ipc.sleep(125) ipc.control(66587,75416) ipc.sleep(125) ipc.control(66587,75418) ipc.sleep(125) ipc.control(66587,75420) ipc.sleep(125) ipc.control(66587,75422) ipc.sleep(125) ipc.control(66587,75424) ipc.sleep(125) ipc.control(66587,75426) ipc.sleep(125) ipc.control(66587,75428) ipc.sleep(125) ipc.control(66587,75430) ipc.sleep(125) ipc.control(66587,75432) ipc.sleep(125) ipc.control(66587,75434) ipc.sleep(125) -----------------------------------------------------------------Panels -- Brake, Cabin Pressure, Engine control elseif ipcPARAM == 200 then ipc.control(66506,8020) --brake control ipc.control(66506,8021) --cabin pressure ipc.control(66506,8014) --engine control -- Air Intakes, sec eng controls elseif ipcPARAM == 201 then ipc.control(66506,8015) --sec engine cpntrol ipc.control(66506,8016) --air intake -- upper fuel, lower fuel, nozzle elseif ipcPARAM == 202 then ipc.control(66506,8009) --fuel bottom ipc.control(66506,8010) --fuel top ipc.control(66506,8019) --engine control -- air bleed, hydraulic elseif ipcPARAM == 203 then ipc.control(66506,8012) --air bleed ipc.control(66506,8011) --hydr -- temperature control, engine stack elseif ipcPARAM == 204 then ipc.control(66506,8030) --popup engine stack ipc.control(66506,8013) --temp control -- lights elseif ipcPARAM == 205 then ipc.control(66506,8025) --eng lights ipc.control(66506,8027) --FO lights ipc.control(66506,8026) --Capt lights -- AC/DC elseif ipcPARAM == 206 then ipc.control(66506,8007) --DC ipc.control(66506,8008) --AC -- CDU1, CDU2 elseif ipcPARAM == 207 then ipc.control(66506,8035) --CDU1 ipc.sleep(50) ipc.control(66506,8036) --CDU2 -- Overhead elseif ipcPARAM == 208 then ipc.control(66506,8002) ipc.control(66506,8003) end