cellular55

Hi, attached a new log file and the file related the PMDG SDK (I think that is the header file you mention). I do not understand which can be the log entries when I use the mouse. About controllers the assignment are empty. Could you please address about how to sue the DontLLogThese entriy in the ini file and in which section that should be placed? Another point: effectively using a default aircraft tghe ROTOR BRAKE entries are not in the log Thanks and KR Joe FSUIPC6.log PMDG_NG3_SDK.h

Hi John, the control is 70022. About the ROTOR BRAKE I have seen that and it's really strange because, as you can also see in the INI file, I do not use at all that control: I use only controls that are listed in the PMDG 737NGXU SDK document and the FSUIPC offsets. So I do not understand why that's is happenning. Attached the file related the NGXU profile KR Joe B738U.ini

Hi, thanks for reply. Attached the files. As usual trying to modify theMCP HDG value, 5 digit chnage with the VRInsight rotary and 1 digits using the mouse KR Joe FSUIPC6.log fsuipc6.ini

Hi, I have a strange issue managing the MCP values (CRS,Heading, Speed, Altitude, VS) in the PMDG 737 NGXU with FSUIPC 6.0.11 and VRInsight MCP. Using the SDK controls to set the values, instead to have an increment/decrease of 1 digit I get an increment/decrease of 5 (e.g if I want to set the heading from 101 to 102 I get instead 106 and with a second input 111 and so on). The strange thing is that this happens only using with FSUIPC the control (from PMDG SDK) and the correspondent value for mouse right or left clicking , if I click on the rotary of the MCP panel with the mouse the increment/decrease of values is correct (e.g 101 102 103 and so on) Any idea of the possible reason for that and a possible solution? Thanks and KR Joe

Hi John, thanks a lot for the prompt feedback KR Joe

Hi, could you please remind me which is the hotkey to open the FSUIPC 7 screen when inside MSFS? I cannot find anymore the post or the documentation where the key sequence is mentioned. Thanks and KR Joe

Hi, after to have inserted in the ini file the option regarding VRI (sorry I was forgetting the suggestion), the issue seems to be solved. I have closed several times FSUIPC, while still in MSFS, and every time I was able to relaunch it without problems. The strange thing is that I can ensure you that, when the issue was occurring, FSUIPC did not appear anywhere in the task manager. By the way where I can find the auto close option? Thanks for support (as always great) and KR Joe

Hi, issue occurred again. Closed FSUIPC (also clicking on Exit in the icon in the system tray) and MSFS 2020. Reloading MSFS 2020 and try to run again FSUIPC, I get the message that FSUIPC is already running. Only way to solve is to restart the PC as FSUIPC does not appear anywhere also in the Task Manager (running or in background processes). Attached the log KR Joe FSUIPC7.log

HI, only few 🙂 Saitek Joke pro, 2 Saitek Throttle Quadrants, VRInsight MCP Pro, 3 VRInsight TT Panels, WRInsight MS Panel, Saitek Multiswitch, Saitek Rudder pedals, VRInsight CDU I Joe

More or less same here. I have noticed that sometimes, trying to configure the axis, the asis rescan does not respond and also after to have configured them, often the aircraft is not responding to the axis movements.

Hi, I have an I7-6700K on a Z170X-Gaming 3 and Nvidia 2700 Super 8Gb. The problem is that FSUIPC does not appear in the Task manager (I have also problem with P3D that is not properly closing, but in that case I'm able to end it through the Task Manager). KR Joe

Hi, I have just installed the last patch of MSFS and effectively the FPS drop seems now solved, but I'm facing another strange issue. I run MSFS and then I activate FSUIPC to do some first tests. After I exited from MSFS and also from FSUIPC7 (exit option in the menu of the icon). Relaunching after MSFS a second time I tried to activate again FSUPC7, but I get the message that FSUIPC is already running. The problem is that if I go in the task manager FSUIPC is not listed in the active programs and does not appears anywhere. Is there a problem when exiting? How is it possible to avoid the issue? Thanks and kind regards Joe

Hi, in several tools I have written for the simulator (FSX and P3D) I use a lot of 'free' offsets (i.e. 66C0 through 66FF and offsets for Project Magenta). Will be those still available? Thanks and KR Joe

Hi, is there an offset allowing to check how much GPU memory is used in P3D5 without the need to check it through the SHITF-Z key? Thanks and KR Joe

Hi Pete, thanks for the prompt feedback... that is really great!!!!! My cockpit and programs I wrote should be than adjustable ad reusable on MSFS 2020. KR Joe

Hi, for what you know offsets will be available and usable? Thanks and KR Joe

+1 FSUIPC compatibility is fundamental to decide if to get it or not KR Joe

Thanks Pete.. yes I have sent a mail to VRInsight, but I have red around the network that usually they do not answer.. let see.. Joe

Hi Pete, yes.. I have also tried SerialFP2 with the same result.. the 2 devices are not found. I do not know what I could still try now... I have also tried to uninstall the devices and reinstalling them and the drivers with no results. KR Joe

Hi Pete, I think taht is a trouble related WIN10. I have moved the MCP Combo on PC still having WIN7 (where I have also WideFS) and the device is found there. Is not possible to configure and use it through WideFs and LUA scripts right? Thanks and KR Joe

Hi, VRSIM is the VRInsight tool that discovers the devices (like as the initial tool SerialFP2) I have updated WIN10, but this almost one month ago and until few days ago I did not have any trouble. The strange is that some few times the devices are seen, but most of the times no. In the log I have attached it seems that the COM ports are opened but there are some strange messages about the disconnection/the lost of VRSim.exe The two devices are on COM5 and COM6 (and that is visible also in the WIN CP) In FSUIPC I have: [VRInsight] 1=COM6, COM3 2=COM5, COM7 and in VSPE the pairs: COM2 <=> COM3 COM4 <=> COM7 Thanks Joe

Hi, since some days I'm facing issues connecting 2 VRI devices (MCP and CDU I) using VRSIM and VSPE Those were running correctly until some weeks ago, now even if connected and having changed nothing in the config, the devices are most of the times not found and not properly running (other few times they connect and run normally). It seems a sort of random issue. Do you have any idea about what could be the trouble. Attached the FSUIPC extended log. I'm using P3D 4.5 Hot Fix 3 and FSUIPC 6.0.8. Thanks and Kind Regards Joe FSUIPC6.log

Hi, thanks a lot for the advise. I will wait for the fix. KR Joe

HI, I'm trying to use the offset in one app I'm building to manage the PMDG 747 v3. It seems that the offsets listed in the documentation to manage Landing Lights (6506) and Taxi Lights (6510) are not set as expected. Also using the FSUIP logging when I turn on or off the lights the value for these offsets is always 0. Most of other offsets seems to be fine. Suggestion about how is possible to solve this issue? Thanks and KR Joe

Hi, thanks a lot for the info! KR Joe