-
Posts
4,066 -
Joined
-
Last visited
-
Days Won
31
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by V. Heine
-
-
Quote
I changed nothing when this started happening. I tried reinstalling the program, no dice. The attachment shows that the popup window is visible as a choice when I hover over the task bar, but not visible in the application.
Your description of the situation leads me to ask you this question:
Are you absolutely sure that you haven't swapped the monitors or their connections on the graphics card in the meantime?Run the FSCommander again and select Sid / Star / Trans windows one after the other. Close the FSCommander.
Then send me the complete FSC subfolder /SUPPORT zipped to my email address.
You can find my e-mail address here ...
https://forum.simflight.com/topic/87556-important-information-information-importante-wichtige-information/ -
Quote
This is a new problem, before now this problem didn't exist.
I forgot to ask what has changed in the meantime.
The FSCommander has no artificial intelligence and changes any settings independently.
This also applies to any changes to the hardware.Unfortunately I cannot verify your problem.
If the problem was caused by the FSCommander, there will certainly be the relevant postings here.
I recommend the following attempt:
Physically remove monitor 2 and restart the PC with only one monitor.
Start the FSCommander again and then report the result here in the forum.Volker
-
Hi,
Please read here:
https://forum.simflight.com/topic/60271-important-everyone-please-read/
Regards,
Volker
-
Hello Martin
Did you read this announcement?
https://forum.simflight.com/topic/88664-unable-to-load-vatsim-data-important-for-vatsim-users/
Regards,
Volker
-
Hello Ken,
I am happy to hear that the tip was the solution.
I will tell my friend that he is "a bright, smart head".
Especially when the sun shines on him.Take care,
Volker
-
Hello Ken,
a programmer around me, to whom I explained your problem, explained the following phenomenon to me.
In very rare cases it can happen, if another program is started before or during the start of FSCommander,
this other program occupies the window of FSCommander and does not release it again.
Before uninstalling, I would try to start FSCommander as a first and only program before or after all other programs you need while flying.QuoteWhich folders would you recommend backing up prior to reinstalling ? I have 3 in mind, but I'll wait for your recommendation.
As a SimMarket customer, (not required for Aerosoft customers).
make sure to save the Register.fsc file or since the file Register.fsc can not be replaced in case of loss,
I recommend you to print the data of this file.
In the MENU of the FlightSim Commander you can under About -> Register print the data of the file Register.fsc.I also recommend backing up the following files:
\fsccolor.ini
\fsc.ini
\User\Blackbox
User\Logbook.fsc
User\aircraft.fsc
User\BuddyIvao.fsc
User\BuddyVatsim.fsc
\Flightplan\FSC
\Database\UserWP.txt
\Database\UserObj.txtBest regards,
Volker -
Hello Ken,
I cannot verify your problem.
None of the over 12,000 posts here in the forum report this problem.
The intro window cannot be switched off by a parameter during the loading process.Best regards,
Volker
-
Hello Frans,
Quotecan't tx fpl made in FSC
What do you want to tell me with this title?
QuoteI made an FPL KSLC-KIAH of WT2020 IFR but can't open it.
Which format?
Quotealways get No data without flight plan when i push WP.
???
QuoteGen does work and WX .
What is it and what do you mean by the text?
QuoteHow come?
???
QuoteWorked yesterday perfect.
What have you changed since yesterday?
The FSCommander is not so intelligent by changing something on its own.A precise, detailed description of the problem would be very helpful to me.
Volker
#stayathome -
Hello Taff,
please read here...
Regards,
Volker -
Hello Vince,
there is definitely no difference when registering the FSCommander on a server or client in a network.
Please read the announcement and pay attention to the information regarding the installation as administrator.Best regards,
Volker -
Hello Vyacheslav,
I cannot verify your problem.
Please take a screenshot shortly before the error appears
and one with the error messages.
Send these both screenshots to my email address.
You can read my address here.
https://forum.simflight.com/topic/87556-important-information-information-importante-wichtige-information/Best regards,
Volker -
Quote
The program crashes when I added someone to friends. What could it be? FlightSim Commander 10.6
This information is not very helpful.
Use the attached link and answer the questions in detail and precisely.
Please also explain how the program behaves and which error messages appear!!!Regards
Volker
https://forum.simflight.com/topic/60271-important-everyone-please-read/
-
Hallo Herr Land,
QuoteVor einer Woche war alles noch in Ordnung ...
... und was wurde zwischenzeitlich geändert?
Um Ihr Problem zu verifizieren benötige ich von Ihnen den kompletten Unterordner /Support des FSC.
Bitte "packen" Sie diesen Ordner und senden ihn an meine e-mail Adresse.Meine Adresse finden Sie in diesem Beitrag:
https://forum.simflight.com/topic/87556-important-information-information-importante-wichtige-information/Fügen Sie der e-mail auch noch die Titel der AddOn Szenerien sowie die Hersteller bei.
Beste Grüße
Volker Heine
-
Bonjour Olivier,
Vous pouvez télécharger la dernière version de SimMarket sous votre compte et la réinstaller.
CordialementVolker Heine
-
Hello Peter,
How can I help you when there is so little information?
Please read here: https://forum.simflight.com/topic/60271-important-everyone-please-read/
Send the airport file to my email address.
You can find the address here: http://www.fscommander.deRegards,
Volker
-
Bonjour Olivier
Je ne parle pas français et j'ai utilisé Google pour lire et répondre à votre message.
Il est connu que les versions FSC 9.x ne prennent plus en charge P3D V4, x.
L'utilisation de DBManager signifie que certains aéroports ne peuvent pas être lus.
Cela sera signalé une fois le DBManager terminé.
Tout ce que vous devez faire est d'utiliser une restauration de sauvegarde et votre problème est résolu.
Une installation existante peut également être réalisée.
Où le FlightSim Commander a-t-il été acheté?Cordialement
Volker Heine
-
Hello Ken,
The files are currently valid real VORs and NDBs.
It's binary data format that cannot be edited for copyright reasons.
This data are part of the 28 day Airac Cycle. This Cycle can be purchased and is therefore always updated.
However, if you have a current cycle and the navigation system is not displayed, you must notify the relevant provider.Best regards,
Volker
-
Hello,
The installation instructions indicate that an anti-virus program must be switched off.
This is imperative, since a number of system-related functions are part of the installation and the FlightSim Commander.Regards,
Volker
-
Hello Frans,
If the FlightSim Commander was bought from Aerosoft
then contact the Aerosoft Support.Volker
-
Hello Frans!
Can you explain the meaning of your contribution to me?
You and I have been in e-mail contact for a number of days and I have answered every email from you in every conceivable form.
Every current installation contains all necessary programs and data and the FlightSim Commander is fully functional.I hope that Mopperle's answer will make you think about what it can mean, if copyrighted data is requested via this forum.
This is also the reason why your e-mail address above was deleted.
Volker
-
Hallo Peter,
dann sende Deine Screenshots an meine Adresse: heine.volker(at)gmail.com
Gruß
Volker
-
Hello CardaNL,
I am not offended.
Unfortunately it has not been possible for us to use this data legally for a very long time.Regards,
Volker
-
Hello,
A file fsc_ivaodat does not exist in the FlightSim Commander.
Only the file fsc_ivao.dat is available for download.The above file has nothing in common with the FSC_IVAC.TXT file.
In addition, it's not responsible for VatSim.
You may have deleted the file!? Surely you have a backup.
If not write me an email.
You can find the address below.Cheers
Volker -
Quote
Is it FSC10, XPUIPC, Traffic Global or X-plane?
The FSC only supports FS9, FSX and FSUIPC.
Volker
AutoHdg (answered)
in (Former) FS Commander Support Forum
Posted
Hello Frans,
What has changed since yesterday?
The FlightSim Commander is not so intelligent that it independently makes any changes that the user did not make.
The AutoHeading function only works on aircraft that use the simulator's standard autopilot. (read also manual).
Unfortunately, you have not listed the type of aircraft.
Volker