Jump to content
The simFlight Network Forums

go flight rottary and switchbutton moduel


Recommended Posts

dear mr Dowson

i have go flights p48 rotary and pushbutton panel it has 4 rotary encorders and 8 pushbuttons

i am running fsx with fsuipc 4.53 and are using wilcos vol2 airbus ,

i whant to get the rotary encorders to work as a fcu if i go to the goflight configuration and ajust the encorders as

1 speed

2 hdg

4 alt

4 v/s

only the speed and heading work with encorders alt,v/s dont do nothingthis is not done through fsuipc and i whant to ask

can i make theys work with fsuipc and how is that done???

and a nothe qestion is can i get my vrinsight to work with wilco through fsuipc??is there any specific proggraming needed?i tryed with the mapping as instructed on vrinsight pdf manule but it dose not work fully onlly some funtion work

if you can help me to get started

kind regards spiro

Link to comment
Share on other sites

i am running fsx with fsuipc 4.53 and are using wilcos vol2 airbus

... alt,v/s dont do nothingthis is not done through fsuipc and i whant to ask

can i make theys work with fsuipc and how is that done?

Sorry, I don't know. But the answer would not be specific to your GoFlight controls, it would apply to any sort of button or key assignment.

If that add-on provides keyboard short-cuts for manipulating the Altitude and V/S values, then you could assign to those. Or else you might find the FSUIPC mouse macro facility is able to operate on the panel dials, and therefore be used for FSUIPC assignments. Finally, if both of those fail, you might, just, be able to do it via L-var access in a Lua plug-in program. But that gets complicated.

and a nothe qestion is can i get my vrinsight to work with wilco through fsuipc?

FSUIPC is not different just because you use different items of hardware. I understand that the VRInsight units send keypresses instead of joystick button presses, so it means that you are assigning in a different FSUIPC options tab, but otherwise the problem is the same -- i.e. does the add-on you are trying to use provide any means for you to control it other than by mouse?

I can't answer that question. I don't have any Wilco aircradft, and in general I cannot be expected to have every add-on with which folks might want to use FSUIPC.

You may find more help in other threads here -- search on "Wilco" and "Airbus", see what you come up with. But mainly what you need is more information on your Wilco aircraft. It should come with documentation telling you alternative ways of controlling it -- i.e. keyboard shortcuts rather than mouse clicks.

Regards

Pete

Link to comment
Share on other sites

dear m Dowson i was told to use the macro function in fsuipc for the rotary encorders to handel alt and v/s

but i got w7 ultimate 64bit for my pc and redownloaded fscuip 4.53 and re registed but once i whent to do the macro

programming it is missing i had seen it when i was using xp but with w7 it is not in the button section nor anywere in fsuipc have i done somthing wrong???? what do i have to do to get it back????

kind regards spiro

Link to comment
Share on other sites

but i got w7 ultimate 64bit for my pc and redownloaded fscuip 4.53 and re registed but once i whent to do the macro

programming it is missing i had seen it when i was using xp but with w7 it is not in the button section nor anywere in fsuipc have i done somthing wrong?

I use Win7 Ultimate 64 bit version, and there is absolutely no difference for FSUIPC at all. Are you possibly seeing that the centre parts of the options pages don't fit the outer part, that they are too big? That the Fonts inside are larger than the fonts in the Tabs? If so, that's not specifically a Win7 problem but a long term but rare problem affecting a few users and starting with WinXP. It is fixed in the latest incremental updates. Please get the latest version from the Updates Announcement at the top of this Forum.

Regards

Pete

Link to comment
Share on other sites

Hello again M Dowson i do not understand witch of the goodeis to downlown and how to insert it to fsuipc????

please bear with my qestions until i get use to this pc stuff :oops: :oops: i have fsuipc 4.53 28th august copy

and i see all of the tabs ok as when i had xp once i go buttons+switches than key presses on the right under autosave/gpsout tab i dont have the macro tab i did with xp and i could creat a file maybe its on a nother tab??and i am mixed up???

king regards spiro

Link to comment
Share on other sites

i do not understand witch of the goodeis to downlown and how to insert it to fsuipc?

please bear with my qestions until i get use to this pc stuff :oops: :oops: i have fsuipc 4.53 28th august copy

Do you not see clearly listed an entry for FSUIPC4? It is not a "Goodie" you are "inserting into FSUIPC", it is a LATER VERSION of FSUIPC4 with the problem corrected. You download the updated FSUIPC4 by clicking on the link, then unzip it into your FSX Modules folder!

Pete

Link to comment
Share on other sites

hello andy thanks for the info but i do not see mouse macro any were you have sent me

when i had xp i did see it and use it but know with w7 it is not there also my goflight is not working with wilco it was before with xp :o :o is this how this hobbi will be for 3 houres flight you need 5 days trying to get it work!!!!!!

i know i am not good with pc at all but the thing is it was working before!!!!!

kind regards spiro

Link to comment
Share on other sites

hello andy thanks for the info but i do not see mouse macro any were you have sent me

when i had xp i did see it and use it but know with w7 it is not there

I already asked you if it looks like the text in the options windows is too big and causing the inner windows to be too big for the outer options window, the one with the Tabs. All the tabs would be there but part of the options window would not be accessible because it won't fit.

You didn't bother to answer that question, but if this is indeed what you are seeing then the answer is to download and install the Update as I advised.

If that isn't the problem you are seeing then all I can say is that your Windows system must be behaving in a very strange way, to selectively remove buttons from a program file!

Pete

Link to comment
Share on other sites

dear m Dawson i know i am getting on you nurves and i am very sorry about that but i have done what you say and and it has not changed at all so i know i am douing it right can you please put a link on this thread so i can try again and know it is the right one because i dont whant to belive that the win7 is the problem i hope its me not doing it right

kind regards spiro

Link to comment
Share on other sites

dear m Dawson i know i am getting on you nurves and i am very sorry about that but i have done what you say and and it has not changed at all

Show me two things:

1. The FSUIPC4.LOG file, which you will find in the FSX Modules folder. It is a text file, you can paste it into a message here.

2. Capture a picture (ALT+Print Screen) of the options page on which you cannot find the button you want, and attach it to your message, so i can see what it is that concerns you so.

so i know i am douing it right can you please put a link on this thread

What item in the Announcement are you clicking, and why are you unsure it is correct? I'd rather understand why you cannot understand the list of downloadable parts on the Updates announcement, so I can improve the layout if necessary.

Regards

Pete

Link to comment
Share on other sites

hello again i install from the main page http://www.schiratti.com/dowson.html the fsx fsuipc4.53

and extract to the moduels folder and i have also instal the

PFCFSX driver version 4.353 for FSX and ESP http://fsuipc.simflight.com/beta/pfcfsx4353.zip

from the main programs on the update page when i did install the main fsuipc i was asked to over write and i agreed to over write mybe i should delet all mthat is in the moduels mfile and download again i dont know!

regards spiro

Link to comment
Share on other sites

hello again i install from the main page http://www.schiratti.com/dowson.html the fsx fsuipc4.53

and extract to the moduels folder and i have also instal the

PFCFSX driver version 4.353 for FSX and ESP http://fsuipc.simflight.com/beta/pfcfsx4353.zip

Why are you installing the PFC driver? Do you have PFC equipment as well as GoFlight? If you don't have any PFC devices, connected via serial port connections, then you certainly do not want that installed.

from the main programs on the update page when i did install the main fsuipc i was asked to over write and i agreed to over write mybe i should delet all mthat is in the moduels mfile and download again i dont know!

No, do not delete everything. Just consider whether you have PFC equipment needing the PFC driver, and if not, then delete PFCFSX.DLL from your FSX Modules folder.

Then download the FSUIPC4 update fronm the Updates announcement, and copy the DLL from than into your FSX Modules folder, overwriting the version 4.53 version. This is what i have asked you to do several times now, and Andy has even provided you with a direct link, as i see now.

Please notice that the name "FSUIPC4" is not really the same as the name "PFCFSX". Do you see that? If fact they don't even look remotely similar!

Pete

Link to comment
Share on other sites

i deleted the pfcfsx dll file rebooted the pc downloaded and copied the fsuipc4 rebooted run fsx and still no mouse macros!!!!! i look at the date and it says fsuipc 4.552 28 nov 2009 so i belive that i got it right this time :D

but there is no mouse macro any were???? do i have to do something eles?

Link to comment
Share on other sites

i deleted the pfcfsx dll file rebooted the pc downloaded and copied the fsuipc4 rebooted run fsx and still no mouse macros!!!!! i look at the date and it says fsuipc 4.552 28 nov 2009 so i belive that i got it right this time :D

but there is no mouse macro any were???? do i have to do something eles?

Are you ever going to do what I asked? If not I can see no way to help you further. I'll repeat my requests:

Show me two things:

1. The FSUIPC4.LOG file, which you will find in the FSX Modules folder. It is a text file, you can paste it into a message here.

2. Capture a picture (ALT+Print Screen) of the options page on which you cannot find the button you want, and attach it to your message, so i can see what it is that concerns you so.

Regards

Pete

Link to comment
Share on other sites

Reading options from "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.ini"

NOTE: SimConnect Acc/SP2 Oct07 is supported, but it isn't installed.

NOTE: SimConnect SP1 May07 is supported, but it isn't installed.

Trying to connect to SimConnect Original ...

User Name="spiro katerelos"

User Addr="spkaterelos@hotmail.com"

FSUIPC4 Key is provided

WIDEFS7 not user registered, or expired

Running inside FSX (using SimConnect Original)

Module base=61000000

Wind smoothing fix is fully installed

DebugStatus=15

140 System time = 28/11/2009 21:18:05

140 FLT UNC path = "C:\Users\user\Documents\Flight Simulator X Files\"

140 FS UNC path = "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\"

1435 LogOptions=00000000 00000001

1435 SimConnect_Open succeeded: waiting to check version okay

40310 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

81775 SimStart Event: Initialising SimConnect data requests

81775 FSUIPC Menu entry added

81791 C:\Users\user\AppData\Roaming\Microsoft\FSX\Previous flight.FLT

81791 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\feelThere PIC A332GE\FeelThere_A330-200.AIR

82727 System time = 28/11/2009 21:19:28, Simulator time = 19:11:49 (02:11Z)

82898 Aircraft="Feelthere A330-200 GE Airbus"

84271 Advanced Weather Interface Enabled

84864 **** SimConnect Data Stalled! Re-connecting now****

84864 SimConnect_Open succeeded: waiting to check version okay

84864 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

84864 Initialising SimConnect data requests now

84864 FSUIPC Menu entry added

85753 System time = 28/11/2009 21:19:31, Simulator time = 19:11:49 (02:11Z)

87828 **** SimConnect Data Stalled! Re-connecting now****

87828 SimConnect_Open succeeded: waiting to check version okay

87828 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

87828 Initialising SimConnect data requests now

87828 FSUIPC Menu entry added

88717 System time = 28/11/2009 21:19:34, Simulator time = 19:11:49 (02:11Z)

90886 **** SimConnect Data Stalled! Re-connecting now****

90886 SimConnect_Open succeeded: waiting to check version okay

90886 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

90886 Initialising SimConnect data requests now

90886 FSUIPC Menu entry added

91806 System time = 28/11/2009 21:19:37, Simulator time = 19:11:49 (02:11Z)

93928 **** SimConnect Data Stalled! Re-connecting now****

93928 SimConnect_Open succeeded: waiting to check version okay

93928 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

93928 Initialising SimConnect data requests now

93928 FSUIPC Menu entry added

94833 System time = 28/11/2009 21:19:40, Simulator time = 19:11:49 (02:11Z)

96939 **** SimConnect Data Stalled! Re-connecting now****

96939 SimConnect_Open succeeded: waiting to check version okay

96939 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

96939 Initialising SimConnect data requests now

96939 FSUIPC Menu entry added

97875 System time = 28/11/2009 21:19:43, Simulator time = 19:11:49 (02:11Z)

100043 **** SimConnect Data Stalled! Re-connecting now****

100043 SimConnect_Open succeeded: waiting to check version okay

100043 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

100043 Initialising SimConnect data requests now

100043 FSUIPC Menu entry added

100948 System time = 28/11/2009 21:19:46, Simulator time = 19:11:49 (02:11Z)

103132 **** SimConnect Data Stalled! Re-connecting now****

103132 SimConnect_Open succeeded: waiting to check version okay

103132 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

103132 Initialising SimConnect data requests now

103132 FSUIPC Menu entry added

104208 System time = 28/11/2009 21:19:49, Simulator time = 19:11:49 (02:11Z)

106314 **** SimConnect Data Stalled! Re-connecting now****

106314 SimConnect_Open succeeded: waiting to check version okay

106314 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

106314 Initialising SimConnect data requests now

106314 FSUIPC Menu entry added

107250 System time = 28/11/2009 21:19:52, Simulator time = 19:11:49 (02:11Z)

109216 **** SimConnect Data Stalled! Re-connecting now****

109216 SimConnect_Open succeeded: waiting to check version okay

109216 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

109216 Initialising SimConnect data requests now

109216 FSUIPC Menu entry added

110308 System time = 28/11/2009 21:19:55, Simulator time = 19:11:49 (02:11Z)

112461 **** SimConnect Data Stalled! Re-connecting now****

112461 SimConnect_Open succeeded: waiting to check version okay

112461 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

112461 Initialising SimConnect data requests now

112461 FSUIPC Menu entry added

113833 System time = 28/11/2009 21:19:59, Simulator time = 19:11:49 (02:11Z)

115815 **** SimConnect Data Stalled! Re-connecting now****

115815 SimConnect_Open succeeded: waiting to check version okay

115815 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

115815 Initialising SimConnect data requests now

115815 FSUIPC Menu entry added

116720 System time = 28/11/2009 21:20:02, Simulator time = 19:11:49 (02:11Z)

119340 **** SimConnect Data Stalled! Re-connecting now****

119340 SimConnect_Open succeeded: waiting to check version okay

119340 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

119340 Initialising SimConnect data requests now

119340 FSUIPC Menu entry added

120448 System time = 28/11/2009 21:20:06, Simulator time = 19:11:49 (02:11Z)

122570 **** SimConnect Data Stalled! Re-connecting now****

122570 SimConnect_Open succeeded: waiting to check version okay

122570 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

122570 Initialising SimConnect data requests now

122570 FSUIPC Menu entry added

123724 System time = 28/11/2009 21:20:09, Simulator time = 19:11:49 (02:11Z)

125986 **** SimConnect Data Stalled! Re-connecting now****

125986 SimConnect_Open succeeded: waiting to check version okay

126002 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

126002 Initialising SimConnect data requests now

126002 FSUIPC Menu entry added

127172 System time = 28/11/2009 21:20:12, Simulator time = 19:11:49 (02:11Z)

129543 **** SimConnect Data Stalled! Re-connecting now****

129543 SimConnect_Open succeeded: waiting to check version okay

129543 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

129543 Initialising SimConnect data requests now

129543 FSUIPC Menu entry added

130775 System time = 28/11/2009 21:20:16, Simulator time = 19:11:49 (02:11Z)

133240 **** SimConnect Data Stalled! Re-connecting now****

133240 SimConnect_Open succeeded: waiting to check version okay

133240 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

133240 Initialising SimConnect data requests now

133240 FSUIPC Menu entry added

134535 System time = 28/11/2009 21:20:20, Simulator time = 19:11:49 (02:11Z)

137062 **** SimConnect Data Stalled! Re-connecting now****

137062 SimConnect_Open succeeded: waiting to check version okay

137062 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

137062 Initialising SimConnect data requests now

137062 FSUIPC Menu entry added

138372 System time = 28/11/2009 21:20:24, Simulator time = 19:11:49 (02:11Z)

140915 **** SimConnect Data Stalled! Re-connecting now****

140931 SimConnect_Open succeeded: waiting to check version okay

140931 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

140931 Initialising SimConnect data requests now

140931 FSUIPC Menu entry added

142288 System time = 28/11/2009 21:20:27, Simulator time = 19:11:49 (02:11Z)

144956 **** SimConnect Data Stalled! Re-connecting now****

144956 SimConnect_Open succeeded: waiting to check version okay

144956 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

144956 Initialising SimConnect data requests now

144956 FSUIPC Menu entry added

146329 System time = 28/11/2009 21:20:31, Simulator time = 19:11:49 (02:11Z)

149074 **** SimConnect Data Stalled! Re-connecting now****

149074 SimConnect_Open succeeded: waiting to check version okay

150416 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

150416 Initialising SimConnect data requests now

150416 FSUIPC Menu entry added

151835 System time = 28/11/2009 21:20:37, Simulator time = 19:11:49 (02:11Z)

154690 **** SimConnect Data Stalled! Re-connecting now****

154690 SimConnect_Open succeeded: waiting to check version okay

154690 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

154690 Initialising SimConnect data requests now

154690 FSUIPC Menu entry added

156172 System time = 28/11/2009 21:20:41, Simulator time = 19:11:49 (02:11Z)

159089 **** SimConnect Data Stalled! Re-connecting now****

159105 SimConnect_Open succeeded: waiting to check version okay

159105 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

159105 Initialising SimConnect data requests now

159105 FSUIPC Menu entry added

160540 System time = 28/11/2009 21:20:46, Simulator time = 19:11:49 (02:11Z)

163520 **** SimConnect Data Stalled! Re-connecting now****

163520 SimConnect_Open succeeded: waiting to check version okay

163520 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

163520 Initialising SimConnect data requests now

163520 FSUIPC Menu entry added

165064 System time = 28/11/2009 21:20:50, Simulator time = 19:11:49 (02:11Z)

168137 **** SimConnect Data Stalled! Re-connecting now****

168137 SimConnect_Open succeeded: waiting to check version okay

168137 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

168137 Initialising SimConnect data requests now

168137 FSUIPC Menu entry added

169744 System time = 28/11/2009 21:20:55, Simulator time = 19:11:49 (02:11Z)

172880 **** SimConnect Data Stalled! Re-connecting now****

172880 SimConnect_Open succeeded: waiting to check version okay

172880 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

172880 Initialising SimConnect data requests now

172880 FSUIPC Menu entry added

174502 System time = 28/11/2009 21:21:00, Simulator time = 19:11:49 (02:11Z)

177716 **** SimConnect Data Stalled! Re-connecting now****

177716 SimConnect_Open succeeded: waiting to check version okay

177716 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

177716 Initialising SimConnect data requests now

177716 FSUIPC Menu entry added

179370 System time = 28/11/2009 21:21:04, Simulator time = 19:11:49 (02:11Z)

182568 **** SimConnect Data Stalled! Re-connecting now****

182568 SimConnect_Open succeeded: waiting to check version okay

182568 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

182568 Initialising SimConnect data requests now

182568 FSUIPC Menu entry added

184284 System time = 28/11/2009 21:21:09, Simulator time = 19:11:49 (02:11Z)

187638 **** SimConnect Data Stalled! Re-connecting now****

187638 SimConnect_Open succeeded: waiting to check version okay

187638 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

187638 Initialising SimConnect data requests now

187638 FSUIPC Menu entry added

189385 System time = 28/11/2009 21:21:15, Simulator time = 19:11:49 (02:11Z)

192801 **** SimConnect Data Stalled! Re-connecting now****

192801 SimConnect_Open succeeded: waiting to check version okay

192801 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

192801 Initialising SimConnect data requests now

192801 FSUIPC Menu entry added

194564 System time = 28/11/2009 21:21:20, Simulator time = 19:11:49 (02:11Z)

198043 **** SimConnect Data Stalled! Re-connecting now****

198043 SimConnect_Open succeeded: waiting to check version okay

198058 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

198058 Initialising SimConnect data requests now

198058 FSUIPC Menu entry added

199837 System time = 28/11/2009 21:21:25, Simulator time = 19:11:49 (02:11Z)

203425 **** SimConnect Data Stalled! Re-connecting now****

203425 SimConnect_Open succeeded: waiting to check version okay

203425 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

203425 Initialising SimConnect data requests now

203425 FSUIPC Menu entry added

205281 System time = 28/11/2009 21:21:30, Simulator time = 19:11:49 (02:11Z)

208854 **** SimConnect Data Stalled! Re-connecting now****

208854 SimConnect_Open succeeded: waiting to check version okay

208869 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

208869 Initialising SimConnect data requests now

208869 FSUIPC Menu entry added

210726 System time = 28/11/2009 21:21:36, Simulator time = 19:11:49 (02:11Z)

214439 **** SimConnect Data Stalled! Re-connecting now****

214439 SimConnect_Open succeeded: waiting to check version okay

216264 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

216264 Initialising SimConnect data requests now

216264 FSUIPC Menu entry added

218183 System time = 28/11/2009 21:21:43, Simulator time = 19:11:49 (02:11Z)

221989 **** SimConnect Data Stalled! Re-connecting now****

221989 SimConnect_Open succeeded: waiting to check version okay

221989 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

221989 Initialising SimConnect data requests now

221989 FSUIPC Menu entry added

223955 System time = 28/11/2009 21:21:49, Simulator time = 19:11:49 (02:11Z)

227823 **** SimConnect Data Stalled! Re-connecting now****

227839 SimConnect_Open succeeded: waiting to check version okay

227839 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

227839 Initialising SimConnect data requests now

227839 FSUIPC Menu entry added

229805 System time = 28/11/2009 21:21:55, Simulator time = 19:11:49 (02:11Z)

233751 **** SimConnect Data Stalled! Re-connecting now****

233751 SimConnect_Open succeeded: waiting to check version okay

235592 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

235592 Initialising SimConnect data requests now

235592 FSUIPC Menu entry added

237605 System time = 28/11/2009 21:22:03, Simulator time = 19:11:49 (02:11Z)

241630 **** SimConnect Data Stalled! Re-connecting now****

241630 SimConnect_Open succeeded: waiting to check version okay

241630 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

241630 Initialising SimConnect data requests now

241630 FSUIPC Menu entry added

243704 System time = 28/11/2009 21:22:09, Simulator time = 19:11:49 (02:11Z)

247776 **** SimConnect Data Stalled! Re-connecting now****

247776 SimConnect_Open succeeded: waiting to check version okay

247776 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

247776 Initialising SimConnect data requests now

247776 FSUIPC Menu entry added

251894 System time = 28/11/2009 21:22:17, Simulator time = 19:11:49 (02:11Z)

256075 **** SimConnect Data Stalled! Re-connecting now****

256075 SimConnect_Open succeeded: waiting to check version okay

256075 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

256075 Initialising SimConnect data requests now

256075 FSUIPC Menu entry added

258212 System time = 28/11/2009 21:22:23, Simulator time = 19:11:49 (02:11Z)

262456 **** SimConnect Data Stalled! Re-connecting now****

262456 SimConnect_Open succeeded: waiting to check version okay

262456 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

262456 Initialising SimConnect data requests now

262456 FSUIPC Menu entry added

264499 System time = 28/11/2009 21:22:30, Simulator time = 19:11:49 (02:11Z)

268789 **** SimConnect Data Stalled! Re-connecting now****

268789 SimConnect_Open succeeded: waiting to check version okay

268805 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

268805 Initialising SimConnect data requests now

268805 FSUIPC Menu entry added

273391 System time = 28/11/2009 21:22:39, Simulator time = 19:11:49 (02:11Z)

277759 **** SimConnect Data Stalled! Re-connecting now****

277759 SimConnect_Open succeeded: waiting to check version okay

277759 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

277759 Initialising SimConnect data requests now

277759 FSUIPC Menu entry added

280006 System time = 28/11/2009 21:22:45, Simulator time = 19:11:49 (02:11Z)

284467 **** SimConnect Data Stalled! Re-connecting now****

284483 SimConnect_Open succeeded: waiting to check version okay

284483 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

284483 Initialising SimConnect data requests now

284483 FSUIPC Menu entry added

286761 System time = 28/11/2009 21:22:52, Simulator time = 19:11:49 (02:11Z)

296043 **** SimConnect Data Stalled! Re-connecting now****

296043 SimConnect_Open succeeded: waiting to check version okay

296043 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

296043 Initialising SimConnect data requests now

296043 FSUIPC Menu entry added

307353 System time = 28/11/2009 21:23:12, Simulator time = 19:11:49 (02:11Z)

530060 Sim stopped: average frame rate for last 219 secs = 16.9 fps

539092 System time = 28/11/2009 21:27:04, Simulator time = 19:15:30 (02:15Z)

539092 *** FSUIPC log file being closed

Average frame rate for running time of 423 secs = 9.4 fps

Memory managed: 93 Allocs, 93 Freed

fsuipc1.png

this is the log file

Link to comment
Share on other sites

Reading options from "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.ini"

...

Er .. why have you removed the crucial line, the first line, which proves to me which version of FSUIPC you are using? By deleting that you've rendered the file you posted almost useless... except for one important thing:

NOTE: SimConnect Acc/SP2 Oct07 is supported, but it isn't installed.

NOTE: SimConnect SP1 May07 is supported, but it isn't installed.

You are running FSX with no updates, the base version with none of the bugs fixed. I'd advise you to download the SP1 and SP2 updates and apply them, one at a time (run FSX in between), to get your FSX up to date and fixed.

The reason you have no "Mouse Macro Creation" buttons is stated quite clearly in the User Guide -- the very first lines in the Mouse Macro section, which state:

NOTE: These facilities need FSX with at least the SP1 update incorporated. Macro files should work with the original version of FSX, but the easy user macro creation facilities will not be available.

Additionally, it looks like it's either a faulty FSX install in the first place, or your frame rates are so low that Simconnect and FSUIPC are simply not communicating. These errors show this -- every 3 seconds because no data whatsoever is arriving!

84864 **** SimConnect Data Stalled! Re-connecting now****

And this proves it:

Average frame rate for running time of 423 secs = 9.4 fps

That's a really atrocious average frame rate. You need to turn down most of your FSX settings in order to get something flyable!

Finally, you've deleted the last line too! That tells me things as well.

Please do NOT edit the file and delete important lines!

Pete

Link to comment
Share on other sites

dear m Dawson finally my probleme is solved :D :D :D :D :D :D :D :D :D :D :D :D :D

it seems that when i took the pc to tech to format and install win7 i also gave hime all my fsx addons

all fax and addons are ORIGINAL i never use downloads from torrents!!!! i had asked him also(AND PAYED HIM)also

to get me the last drivers and sp for all my hard were and softwere +sp1 and sp2 for fsx but that was the probleme

in the home page of fsx uasly it says that you need the new sp as for mine it dident!!!! so i belived that he had done it and ofcoures when i payed an extra 50 euro of updates i beleved that he had done them any way he did not

so i got sp1 and sp2 and mouse macro is back also my go flight moduel is working ok

i would like to thank you very much for you paitients with me and for your assistance and help and please forgive me

as i am not so good with pc my probleme is solved thank you again

kind regards spiro

Link to comment
Share on other sites

dear mDawson well i spoke too soon as i whent to use the mouse macro i opend a file and startet the mouse trapping as i assigend the funtion i whanted i closed the macro and whent to asighin the rotary encorders to this

asi tickd the fs option and whent to find my file settinfs fsx froze and i hade to restart it i tryed 3 more times and the same happend would you like me to seend a log of fsuipc? also wilco has got a key assigment configuration ready it is with ctr-num1 and so one could i program my rotary with that off set?? can it be done and with witch option?

kind regards

Link to comment
Share on other sites

... i whent to use the mouse macro i opend a file and startet the mouse trapping as i assigend the funtion i whanted i closed the macro and whent to asighin the rotary encorders to this

asi tickd the fs option and whent to find my file settinfs fsx froze

Sorry, you'll need to explain that in much more detail.

And could you possibly, please use separate sentences (use the full stop '.' and spaces) and perhaps new paragraphs (new lines) now and then? Whilst I can understand that you cannot spell English well, you surely know how to make sentences and paragraphs? It would make talking with you far easier. It is very laborious trying to extract any meaning from what you write!

would you like me to seend a log of fsuipc?

No, not yet. Just explain yourself more first. I cannot picture what you are doing.

also wilco has got a key assigment configuration ready it is with ctr-num1 and so one could i program my rotary with that off set?? can it be done and with witch option?

Sorry, I don't understand a word of that. You seem to be mixing up key assignments with FSUIPC offsets? Why are you introducing offsets?

If you simply want to assign a keystroke to a button, just do so. The facility is there in front of you, on the left-hand side of the Buttons & Switches tab. Have you looked?

Pete

Link to comment
Share on other sites

hello M dowson

My probleme is "fsx freezing onece i tryed to programe mouse macro"

I found the probleme of fsx freezing,

I had changed the fsx alllication to (compatibility mode-run program as win xpsevice pack 3)

and(PRIVILEGE LEVEL-Run this program as an administrator.

I had done this when i was trying to ge my GF moduel to work,but i changed the settings to what they were and all is ok,

both are working with out crashing fsx and i have full useage of mouse macro with no probleme.

Thanks again and sorry about the spelling,I was all day infront of the pc :shock: :shock: :shock: .

The add on i am using is WILCO AIRBUS VOL2,it has its own key configurator witch has a key combination ready for use,

for exampel if i press CTR+Num 1 it will move one click of the FCUs speed knob down,and if i press CTR+NUM2 it will move one click of the FCUs speed knob up.

These are rotary encorders my qestion is

"How can i make use of WILCOs ready key combinations,to get my GF rortary encorders to do this function,using FSUIPC"

I hope you can understand my qestion and what i whant to do through FSUIPC

Thanks again

regards

spiro

Link to comment
Share on other sites

The add on i am using is WILCO AIRBUS VOL2,it has its own key configurator witch has a key combination ready for use,

for exampel if i press CTR+Num 1 it will move one click of the FCUs speed knob down,and if i press CTR+NUM2 it will move one click of the FCUs speed knob up.

These are rotary encorders my qestion is

"How can i make use of WILCOs ready key combinations,to get my GF rortary encorders to do this function,using FSUIPC"

I hope you can understand my qestion and what i whant to do through FSUIPC

Yes, and I already answered that, here:

If you simply want to assign a keystroke to a button, just do so. The facility is there in front of you, on the left-hand side of the Buttons & Switches tab. Have you looked?

Please do browse through the documentation some time. It is all explained for you. You can assign FS controls OR keystrokes to any buttons, knobs, whatever. There is no problem, you only have to look. I don't know how you manage to use the "mouse macro" facilities, which are much more complicated, yet ask questions like how to assign a keystroke? What is it you don't understand?

Pete

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.