Jump to content
The simFlight Network Forums

FSUIPC 4.82 and LINDA/LUA


Recommended Posts

I am experiencing an issue that coincides with the installation of FSUIPC 4.82.

After setting up and launching into a flight, FSX is crashing at the moment when LINDA and LUA scripts typically load. Subsequent computer reboots and relaunching of FSX results in the same experience.

I went back to my previous version of FSUIPC (version 4.811), and the problem went away. I am also able to complete flights, and my LINDA assignments and LUA scripts load and work without issue.

Link to comment
Share on other sites

I am experiencing an issue that coincides with the installation of FSUIPC 4.82.

I went back to my previous version of FSUIPC (version 4.811), and the problem went away. I am also able to complete flights, and my LINDA assignments and LUA scripts load and work without issue.

I'd need a lot more information, and probably help from the LINDA authors. The changes between 4.811 and 4.82 are minimal as far as any of that stuff is concerned. The only Lua-affecting changes were the addtion of the Tracing facilities for Lua (a new entry in the Lgging tab), and the optional prevention of joystick re-scanning when entering the FSUIPC options. I've made no other changes which I can imagine would possibly affect LINDA or Lua specifically.

You could start by providing details of the crash -- module and offset as reported by Windows in the Windows error log, and the FSUIPC4 Logs and INI files. Maybe you could also enable the Lua logging so that we can see what Lua module is crashing and when.

Regards

Pete

Link to comment
Share on other sites

You could start by providing details of the crash -- module and offset as reported by Windows in the Windows error log, and the FSUIPC4 Logs and INI files. Maybe you could also enable the Lua logging so that we can see what Lua module is crashing and when.

Pete,

Here is a start...

FSUIPC4 Logs and INI files

********* FSUIPC4, Version 4.82 by Pete Dowson *********

FSUIPC4 Key is provided

WIDEFS7 not user registered, or expired

Running inside FSX on Windows 7

Module base=61000000

609 System time = 07/04/2012 11:05:54

609 FLT path = "C:\Users\D14S\Documents\Flight Simulator X Files\"

640 Trying to connect to SimConnect Acc/SP2 Oct07 ...

656 FS path = "D:\Microsoft Flight Simulator X\"

2762 Run: "D:\Microsoft Flight Simulator X\Modules\linda.exe"

2871 Run: "D:\Microsoft Flight Simulator X\Modules\NAVCOM_v8a.exe"

2964 LogOptions=80000000 00000001

2964 Wind smoothing fix is fully installed

2964 G3D.DLL fix attempt installed ok

2964 SimConnect_Open succeeded: waiting to check version okay

2964 Trying to use SimConnect Acc/SP2 Oct07

11139 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)

11139 Initialising SimConnect data requests now

11139 FSUIPC Menu entry added

11170 C:\Users\D14S\Documents\Flight Simulator X Files\Default.FLT

11170 D:\Microsoft Flight Simulator X\SimObjects\Airplanes\RealAir Duke Turbine\RealAir_Duke_Turbine.AIR

118546 System time = 07/04/2012 11:07:52, Simulator time = 11:06:01 (19:06Z)

119996 Aircraft="RealAir Beech Duke Turbine Winglets Era"

120043 Starting everything now ...

120106 Using "D:\Microsoft Flight Simulator X\Modules\GFDEV.DLL", version 2.1.0.1

120106 GoFlight GFLGT detected: 1 device

120106 GoFlight GF166 detected: 5 devices

120106 GoFlight GFMCP detected: 1 device

120106 GoFlight GFRP48 detected: 3 devices

FSUIPC.INI file:

[AUTO]

[General]

UpdatedByVersion=4820

History=D9ZRTPK6FSKONVC9S3WHU

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=No

FixMachSpeedBug=No

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=Yes

CloudIcing=Yes

GenerateCirrus=Yes

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=Yes

WindSmoothness=-1

WindSmoothAirborneOnly=No

PressureSmoothness=50

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=Yes

LoadPlanMenu=Yes

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=Yes

ZapSound=firework

ShortAircraftNameOk=No

UseProfiles=Yes

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

WeatherReadFactor=5

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

Console=No

GetNearestAirports=Yes

LuaRerunDelay=66

ConsoleWindow=-8,-8,669,1143

EnableMouseLook=Yes

InitDelay=0

AxesWrongRange=No

DeleteVehiclesForAES=Yes

LogLua=Yes

MouseWheelMove=No

AutoScanDevices=Yes

FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0

SimConnectUsed=10.0.61259.0

[JoyNames]

AutoAssignLetters=No

1=Saitek Pro Flight Rudder Pedals

1.GUID={6FFCBF40-DB82-11DE-8001-444553540000}

0=PFC USB Joystick

0.GUID={E005A440-B81E-11DF-8001-444553540000}

4=BU0836X Interface

4.GUID={46426490-950B-11E0-8001-444553540000}

3=GoFlight GF-TQ6 Throttle System

3.GUID={873E2BE0-CB13-11DF-8007-444553540000}

2=BU0836X Interface

2.GUID={C5E58370-808A-11E0-8001-444553540000}

[buttons]

!PollInterval=25

!ButtonRepeat=20,10

PollInterval=15

ButtonRepeat=75,0

!1=;PFC Yoke Unswitched

!1=CR(-2,2)2,0,C65607,0 ;L1-ELEV_TRIM_DN

!2=CR(-2,2)2,1,C65615,0 ;L2-ELEV_TRIM_UP

!3=CP(-2,2)2,4,K65,9 ;R1-View Previous In Category

!4=CP(-2,2)2,5,K65,8 ;R2-View Next In Category

!5=CP(-2,2)2,6,C65580,0 ;RPB-AP_MASTER

6=P16,18,K71,8

7=CP(-2,2)165,2,C65759,0 ;FLAPS_UP-FLAPS_DECR

8=CP(-2,2)165,1,C65758,0 ;FLAPS_DN-FLAPS_INCR

!2=;PFC Yoke Switched

!9=CP(+2,2)2,0,K50,9 ;L1-GPS

!10=CP(+2,2)2,1,C65564,0 ;L2-ATC

!11=CP(+2,2)2,4,K83,8 ;R1-View Next Category

!12=CP(+2,2)2,5,K83,9 ;R2-View Previous Category

!13=CP(+2,2)2,6,K66,8 ;RPB-ALTIMETER_RESET

14=CP(+2,2)165,2,C66483,0 ;FLAPS_UP-TOGGLE_PUSHBACK

15=CP(+2,2)165,1,C65589,0 ;FLAPS_DN-SPOILERS

!3=;GF-RP48-A (175,Buttons=0-7,R1=8-11,R2=12-15,R3=16-19,R4=20-23)

!4=;GF-RP48-B (174,Buttons=0-7,R1=8-11,R2=12-15,R3=16-19,R4=20-23)

!5=;GF-T8-A (109,Buttons=0-7)

!6=;GF-T8-B (109,Buttons=8-15)

!7=;GF-P8-A (101,Buttons=0-7)

!8=;GF-166-NAV1 (141,Buttons=0-2)

37=P101,6,C65793,0

44=P109,15,CL1:R,2

46=U109,15,CL1:R,1

!47=P101,6,C66375,0 ;TOGGLE_GPS_DRIVES_NAV1

!48=U101,6,C66375,0 ;TOGGLE_GPS_DRIVES_NAV1

50=P101,5,C66181,0

51=P101,7,C66288,0

52=P101,4,C66180,0

56=P174,5,C66477,0

81=P101,0,C66172,0

82=P109,11,CL26:R,1

83=U109,11,CL26:R,2

84=P109,8,C66241,0

85=U109,8,C66241,0

86=P109,9,C66339,0

87=U109,9,C66339,0

88=P109,10,C66242,0

89=U109,10,C66242,0

90=P109,12,C66338,0

91=U109,12,C66338,0

92=P109,13,C66072,0

93=U109,13,C66073,0

94=P109,14,C66287,0

95=U109,14,C66287,0

96=P101,1,C66173,0

97=P101,2,C66174,0

98=P101,3,C66175,0

105=P0,38,CL49:R,3

106=U0,38,CL49:R,4

228=P174,6,C65846,0

229=P174,7,C65844,0

248=P126,0,C65876,3

265=P174,0,C66463,0

284=P174,1,C66464,0

286=P142,24,CL15:R,4

295=P142,18,CL15:R,5

300=P142,27,CL15:R,3

311=P174,2,C66465,0

312=P174,3,C65842,0

313=P175,0,C66172,0

314=P175,1,C66173,0

315=P175,2,C66174,0

316=P175,3,C66175,0

317=P175,4,C66176,0

318=P175,5,C66177,0

319=P175,6,C66178,0

320=P175,7,C66179,0

327=P125,16,C65876,3

328=P175,10,CL3:R,1

329=U175,10,CL3:R,1

330=P175,9,CL3:R,2

331=U175,9,CL3:R,2

332=P175,11,CL3:R,1

333=U175,11,CL3:R,1

334=P175,8,CL3:R,2

335=U175,8,CL3:R,2

336=P175,14,CL3:R,3

337=U175,14,CL3:R,3

338=P175,15,CL3:R,3

339=U175,15,CL3:R,3

340=P175,13,CL3:R,4

341=U175,13,CL3:R,4

342=P175,12,CL3:R,4

343=U175,12,CL3:R,4

344=P175,18,CL3:R,5

345=U175,18,CL3:R,5

346=P175,19,CL3:R,5

347=U175,19,CL3:R,5

348=P175,17,CL3:R,6

349=U175,17,CL3:R,6

350=P175,16,CL3:R,6

351=U175,16,CL3:R,6

352=P175,23,CL3:R,7

353=U175,23,CL3:R,7

354=P175,22,CL3:R,7

355=U175,22,CL3:R,7

356=P175,21,CL3:R,8

357=U175,21,CL3:R,8

358=P175,20,CL3:R,8

359=U175,20,CL3:R,8

362=P142,25,CL15:R,4

363=P142,26,CL15:R,3

368=P142,16,C65793,0

387=P142,17,C66288,0

404=P143,0,CL84:R,1

405=P143,1,CL84:R,2

406=P143,2,CL84:R,3

461=P174,4,C65843,0

493=P0,21,C1084,0

494=U0,21,CL54:R,0

514=P176,0,C66604,0

515=P176,1,C66605,0

516=P176,2,C66606,0

517=P176,3,C66609,0

518=P176,4,C66611,0

519=P176,5,C66612,0

520=P176,6,C66615,0

521=P176,7,C66616,0

522=P2,21,C1084,0

523=U2,21,CL54:R,0

524=P141,17,C65564,0

526=P141,18,C66619,0

536=P141,16,C66624,0

538=P142,1,C66618,0

539=P142,0,C66617,0

540=P142,2,C66619,0

541=P142,9,CL9:R,1

543=P142,8,CL9:R,1

544=U142,8,CL9:R,1

545=P142,10,CL9:R,2

547=P142,11,CL9:R,2

548=U142,11,CL9:R,2

[AutoSave]

AutoSaveEnabled=Yes

Interval=300

Files=10

SaveOnGround=Yes

Next=2

1=Sat 094746

2=Sat 090251

3=Sat 090750

4=Sat 091250

5=Sat 091749

6=Sat 092249

7=Sat 092748

8=Sat 093248

9=Sat 093747

10=Sat 094247

[GPSout]

GPSoutEnabled=No

Port=COM0

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[GPSout2]

GPSoutEnabled=No

Port=<none set>

Speed=4800

Interval=2000

PosTo6Decimal=No

Sentences=

[WideServer]

WideFSenabled=No

[Axes]

0=0X,256,D,9,0,0,0

1=0Y,256,D,10,0,0,0

2=0Z,256,D,17,0,0,0

3=0R,256,D,14,0,0,0

4=0U,256,D,18,0,0,0

5=0V,256,D,13,0,0,0

6=0S,256,D,33,0,0,0

7=1X,256,D,7,0,0,0

8=1Y,256,D,8,0,0,0

9=1R,256,D,3,0,0,0

10=2X,256,D,1,0,0,0

11=2Y,256,D,2,0,0,0

12=2Z,256,D,17,0,0,0

13=2R,256,D,14,0,0,0

14=2U,256,D,18,0,0,0

15=2V,256,D,13,0,0,0

16=2S,1008,D,33,0,0,0

17=3X,256,D,9,0,0,0

18=3Y,256,D,10,0,0,0

19=3Z,256,D,17,0,0,0

20=3R,256,D,14,0,0,0

21=3U,256,D,18,0,0,0

22=3V,256,D,13,0,0,0

23=3S,256,D,33,0,0,0

24=17X,512,D,9,0,0,0

25=17Y,512,D,10,0,0,0

26=17Z,512,D,17,0,0,0

27=17R,512,D,18,0,0,0

28=17U,512,D,13,0,0,0

29=17V,512,D,14,0,0,0

[JoystickCalibration]

ExcludeThrottleSet=No

ExcludeMixtureSet=No

ExcludePropPitchSet=No

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

LeftBrake=-16384,16383/16

RightBrake=-16383,16384/16

Rudder=-16384,-512,512,16383

Rudder Trim=-16128,-255,255,255/32

PanHeading=-16384,-512,512,16383/8

AllowSuppressForPFCquad=Yes

Aileron=-15866,-512,512,15866/8

Elevator=-15866,-512,512,15866/8

Rudder=-15866,-512,512,15866

LeftBrake=-15866,15866/16

RightBrake=-15866,15866/16

Throttle1=-15866,-15866,-15000,15866/32

Throttle2=-15866,-15866,-15000,15866/32

Mixture1=-15866,-15866,-15000,15866/32

Mixture2=-15866,-15866,-15000,15866/32

PropPitch1=-15866,-15866,-15000,15866/32

PropPitch2=-15866,-15866,-15000,15866/32

Rudder Trim=-16128,-255,255,255/32

PanHeading=-16384,-600,600,16383/8

SlopeLeftBrake=-7

SlopeRightBrake=-7

[Monitor]

Display=1

[sounds]

Path=D:\Microsoft Flight Simulator X\Sound\

Device1=Primary Sound Driver

[Window.LUA display]

!Docked=7424, 3403, 3503, 20

Docked=7411, 2933, 3559, 31

[Axes.Twin Turbine]

0=0X,256,D,1,0,0,0

1=0Y,256,D,2,0,0,0

2=0Z,256,D,17,0,0,0

3=0R,256,D,33,0,0,0

4=0U,256,D,18,0,0,0

5=0V,256,D,13,0,0,0

6=0S,256,D,33,0,0,0

7=1X,256,D,7,0,0,0

8=1Y,256,D,8,0,0,0

9=1R,256,D,3,0,0,0

10=2X,256,D,1,0,0,0

11=2Y,256,D,2,0,0,0

12=2Z,256,D,17,0,0,0

13=2V,256,D,13,0,0,0

14=2S,1008,D,33,0,0,0

15=3X,256,D,9,0,0,0

16=3Y,256,D,10,0,0,0

17=3Z,256,D,17,0,0,0

18=3R,256,D,14,0,0,0

19=3U,256,D,18,0,0,0

20=3V,256,D,13,0,0,0

21=3S,256,D,33,0,0,0

22=17X,512,D,9,0,0,0

23=17Y,512,D,10,0,0,0

24=17Z,512,D,17,0,0,0

25=17R,512,D,18,0,0,0

26=17U,512,D,13,0,0,0

27=17V,512,D,14,0,0,0

[JoystickCalibration.Twin Turbine]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=No

ExcludePropPitchSet=No

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-13145,-512,512,15473/8

Elevator=-15139,-512,512,15018/8

Rudder=-16384,-512,512,16383

LeftBrake=-16384,16383/16

RightBrake=-16384,16383/16

Throttle1=-16042,-5802,-5632,16042

Throttle2=-16207,-5109,-4933,16207

Mixture1=-16384,8192,8192,16046/32

Mixture2=-16384,8192,8192,15679/32

PropPitch1=-16211,0,512,15521/32

PropPitch2=-16384,0,512,15849/32

SyncSlopePropPitch2=9/6,24/20,34/31,46/42,57/53,69/65,79/77,91/90,95/94,105/106,113/114,120/120,127/128

Rudder Trim=-16128,-255,255,255/32

PanHeading=-16384,-600,600,16383/8

SyncSlopeMixture2=1/0,23/19,36/32,47/43,57/50,66/64,80/77,92/89,96/95,104/104,112/112,116/116,120/120,125/124

SlopePanHeading=7

SlopeAileron=2

SlopeElevator=2

SlopeLeftBrake=15

SlopeRightBrake=15

SlopeRudder=2

SyncSlopeThrottle2=37/36,43/43,55/55,67/68,73/70,85/83,102/103,113/112,127/128

[Axes.Twin Piston]

0=0X,256,D,9,0,0,0

1=0Y,256,D,10,0,0,0

2=0Z,256,D,17,0,0,0

3=0R,256,D,14,0,0,0

4=0U,256,D,18,0,0,0

5=0V,256,D,13,0,0,0

6=0S,256,D,33,0,0,0

7=1X,256,D,7,0,0,0

8=1Y,256,D,8,0,0,0

9=1R,256,D,3,0,0,0

10=2X,256,D,1,0,0,0

11=2Y,256,D,2,0,0,0

12=2Z,256,D,17,0,0,0

13=2R,256,D,14,0,0,0

14=2U,256,D,18,0,0,0

15=2V,256,D,13,0,0,0

16=2S,1008,D,33,0,0,0

17=3X,256,D,9,0,0,0

18=3Y,256,D,10,0,0,0

19=3Z,256,D,17,0,0,0

20=3R,256,D,14,0,0,0

21=3U,256,D,18,0,0,0

22=3V,256,D,13,0,0,0

23=17X,512,D,9,0,0,0

24=17Y,512,D,10,0,0,0

25=17Z,512,D,17,0,0,0

26=17R,512,D,18,0,0,0

27=17U,512,D,13,0,0,0

28=17V,512,D,14,0,0,0

[JoystickCalibration.Twin Piston]

ExcludeThrottleSet=No

ExcludeMixtureSet=No

ExcludePropPitchSet=No

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

LeftBrake=-16384,16383/16

RightBrake=-16383,16384/16

Rudder=-16384,-512,512,16383

Rudder Trim=-16128,-255,255,255/32

PanHeading=-16384,-512,512,16383/8

AllowSuppressForPFCquad=Yes

Aileron=-15866,-512,512,15866/8

Elevator=-15866,-512,512,15866/8

Rudder=-15866,-512,512,15866

LeftBrake=-15866,15866/16

RightBrake=-15866,15866/16

Throttle1=-16213,-512,512,15530/32

Throttle2=-16031,-512,512,16031/32

Mixture1=-16384,8192,8192,16046/32

Mixture2=-16205,8192,8192,15855/32

PropPitch1=-16211,0,512,16211/32

PropPitch2=-16203,0,512,16205/32

Rudder Trim=-16128,-255,255,255/32

PanHeading=-16384,-600,600,16383/8

SlopeLeftBrake=15

SlopeRightBrake=15

SyncSlopeThrottle2=68/67,90/89,113/114,126/126

SyncSlopeMixture2=55/49,77/75,103/105,120/121

SyncSlopePropPitch2=55/53,72/68,87/84,108/106,124/123

SlopeAileron=2

SlopeRudder=1

[Axes.Quad Piston]

0=0X,256,D,9,0,0,0

1=0Y,256,D,10,0,0,0

2=0Z,256,D,17,0,0,0

3=0R,256,D,14,0,0,0

4=0U,256,D,18,0,0,0

5=0V,256,D,13,0,0,0

6=0S,256,D,33,0,0,0

7=1X,256,D,7,0,0,0

8=1Y,256,D,8,0,0,0

9=1R,256,D,3,0,0,0

10=2X,256,D,1,0,0,0

11=2Y,256,D,2,0,0,0

12=2Z,256,D,17,0,0,0

13=2R,256,D,14,0,0,0

14=2U,256,D,18,0,0,0

15=2V,256,D,13,0,0,0

16=2S,1008,D,33,0,0,0

17=3X,256,D,1,0,0,0

18=3Y,256,D,2,0,0,0

19=3R,256,D,33,0,0,0

20=3S,256,D,33,0,0,0

21=17X,512,D,9,0,0,0

22=17Y,512,D,10,0,0,0

23=17Z,512,D,17,0,0,0

24=17R,512,D,18,0,0,0

25=17U,512,D,13,0,0,0

26=17V,512,D,14,0,0,0

[JoystickCalibration.Quad Piston]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=No

ExcludePropPitchSet=No

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

MapThr12to34=Yes

MapProp12to34=Yes

MapMix12to34=Yes

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-15866,-512,512,15866/8

Elevator=-15866,-512,512,15866/8

Rudder=-15866,-512,512,15866

LeftBrake=-15866,15866/16

RightBrake=-15866,15866/16

Throttle1=-15866,-15866,-15000,15866/32

Throttle2=-15866,-15866,-15000,15866/32

Mixture1=-15866,-15866,-15000,15866/32

Mixture2=-15866,-15866,-15000,15866/32

PropPitch1=-15866,-15866,-15000,15866/32

PropPitch2=-15866,-15866,-15000,15866/32

Rudder Trim=-16128,-255,255,255/32

PanHeading=-16384,-600,600,16383/8

SlopeLeftBrake=-7

SlopeRightBrake=-7

[Profile.Twin Turbine]

1=Twin Turbine

2=RealAir Beech Duke Turbine N626N Winglets Ventral

3=RealAir Beech Duke Turbine Winglets Era

[Profile.Twin Piston]

1=Twin Piston

2=RealAir Beech Duke N1873K Winglets Ventral

3=Islander 00

[Profile.Quad Piston]

1=Quad Piston

[buttons.Twin Piston]

0=P4,0,CL44:R,5

1=U4,0,CL44:R,6

2=P4,1,CL44:R,5

3=U4,1,CL44:R,6

4=P0,1,CL44:R,5

5=U0,1,CL44:R,6

[MacroFiles]

1=767

2=iFly737

3=leveld767

4=XPDR_Set

[LuaFiles]

1=Altimeter

2=Annunciators

3=Avionics-PWR

4=C172-Timer-XPDR

5=CabinAlt

6=DeIceTwinEng

7=display vals

8=DME-Initialize

9=DME-Select

10=Duke-ADF1

11=Duke-ADF2 - Copy

12=Duke-ADF2-orig

13=Duke-ADF2-Workin

14=Duke-ADF2

15=Duke-FL-XPDR

16=Duke-Timer-XPDR

17=DukeAvionics

18=DukeBeaconLights

19=DukeCowlFlaps

20=DukeDeIce

21=DukeFuelPump

22=DukeIgnition

23=DukeInverter

24=DukeInverter2

25=DukeLandLights

26=DukeMstrWarning

27=DukeNavLights

28=DukePitotHeat

29=DukeTankSelector

30=ET-Timer-Left

31=ET-Timer

32=FT-Timer-Left

33=FT-Timer

34=GF-166-0

35=GF-166-1-LED

36=GF-166-1

37=GF-166-2-LED

38=GF-166-2

39=GF-166-3

40=GF-Dark

41=GF-ModDisp

42=GF-RP48-0-LED

43=GF-RP48-1-LED

44=GF-RP48-2-ATC

45=GF-RP48-2-LED

46=GF-RP48-2a-LED

47=GF-RP48-3

48=GF-RP48-ATC

49=GF-RP48-LED

50=GF-Setup

51=GF166-Timer-XPDR

52=gfdDisplay

53=GFpower

54=ipcReady

55=Kneeboard

56=liar

57=linda

58=log lvars

59=Magnetos

60=MasterSwitches

61=NavCom1

62=NavCom2

63=Overspeed

64=RandomFailure

65=set

66=setup

67=setupAircraft

68=setupC172

69=setupDefault

70=setupDuke

71=ToggleMB

72=YD-OnOff

73=YD

74=Duke-ADF1 - Copy

75=Duke-ADF2-back

76=Duke-ADF1-AAA

77=poll-GF166-1

78=pollrate

79=HidDemo

80=poll-rate

81=Altimeter-NOT

82=AltimeterYES

83=Duke-ADF1YES

84=Duke-ADF-Swap

85=Duke-ADF2-YES

86=ATC-LED

87=ATC-Popup-LED

88=Compass

89=Flaps

90=CabinAlt-bak

91=CabinAlt-bak1

92=CabinAlt1

93=CabinAlt2

94=Duke-ADF-Swap-ba

95=GPS-LED

96=GF-LEDs

97=GF-RP48-0

98=GF-LEDs-bak

99=GPS-LED-orig

100=GF-LEDs-old

101=NC165

102=common

103=Oil-Temp-Press

[Programs]

RunIf1=CLOSE,D:\Microsoft Flight Simulator X\Modules\linda.exe

RunIf2=CLOSE,D:\Microsoft Flight Simulator X\Modules\NAVCOM_v8a.exe

!RunIf3=CLOSE,D:\Microsoft Flight Simulator X\FPS_Limiter\FPS_Limiter.exe /r:D3D9 /f:25 /x:ON /l:ON

!RunIf3=CLOSE,"C:\Users\Schumm\Desktop\RemoteFlight Server.appref-ms"

!Run1=CLOSE,D:\Microsoft Flight Simulator X\Modules\GFdisplay.exe

!Run1=CLOSE,C:\Program Files (x86)\FSWidgets Network Pack\FSWNetHost.exe

[Keys]

1=N49,8,66172,0

[Profile.Single Prop]

1=Flight One Skyhawk 172R KUMP

[Keys.Twin Turbine]

1=N49,8,66172,0

[buttons.Twin Turbine]

6=P16,18,K71,8

7=CP(-2,2)165,2,C65759,0 ;FLAPS_UP-FLAPS_DECR

8=CP(-2,2)165,1,C65758,0 ;FLAPS_DN-FLAPS_INCR

14=CP(+2,2)165,2,C66483,0 ;FLAPS_UP-TOGGLE_PUSHBACK

15=CP(+2,2)165,1,C65589,0 ;FLAPS_DN-SPOILERS

37=P101,6,C65793,0

44=P109,15,CL1:R,2

46=U109,15,CL1:R,1

50=P101,5,C66181,0

51=P101,7,C66288,0

52=P101,4,C66180,0

56=P174,5,C66477,0

81=P101,0,C66172,0

82=P109,11,CL26:R,1

83=U109,11,CL26:R,2

84=P109,8,C66241,0

85=U109,8,C66241,0

86=P109,9,C66339,0

87=U109,9,C66339,0

88=P109,10,C66242,0

89=U109,10,C66242,0

90=P109,12,C66338,0

91=U109,12,C66338,0

92=P109,13,C66072,0

93=U109,13,C66073,0

94=P109,14,C66287,0

95=U109,14,C66287,0

96=P101,1,C66173,0

97=P101,2,C66174,0

98=P101,3,C66175,0

105=P0,38,CL49:R,3

106=U0,38,CL49:R,4

228=P174,6,C65846,0

229=P174,7,C65844,0

248=P126,0,C65876,3

265=P174,0,C66463,0

284=P174,1,C66464,0

286=P142,24,CL15:R,4

295=P142,18,CL15:R,5

300=P142,27,CL15:R,3

311=P174,2,C66465,0

312=P174,3,C65842,0

313=P175,0,C66172,0

314=P175,1,C66173,0

315=P175,2,C66174,0

316=P175,3,C66175,0

317=P175,4,C66176,0

318=P175,5,C66177,0

319=P175,6,C66178,0

320=P175,7,C66179,0

327=P125,16,C65876,3

328=P175,10,CL3:R,1

329=U175,10,CL3:R,1

330=P175,9,CL3:R,2

331=U175,9,CL3:R,2

332=P175,11,CL3:R,1

333=U175,11,CL3:R,1

334=P175,8,CL3:R,2

335=U175,8,CL3:R,2

336=P175,14,CL3:R,3

337=U175,14,CL3:R,3

338=P175,15,CL3:R,3

339=U175,15,CL3:R,3

340=P175,13,CL3:R,4

341=U175,13,CL3:R,4

342=P175,12,CL3:R,4

343=U175,12,CL3:R,4

344=P175,18,CL3:R,5

345=U175,18,CL3:R,5

346=P175,19,CL3:R,5

347=U175,19,CL3:R,5

348=P175,17,CL3:R,6

349=U175,17,CL3:R,6

350=P175,16,CL3:R,6

351=U175,16,CL3:R,6

352=P175,23,CL3:R,7

353=U175,23,CL3:R,7

354=P175,22,CL3:R,7

355=U175,22,CL3:R,7

356=P175,21,CL3:R,8

357=U175,21,CL3:R,8

358=P175,20,CL3:R,8

359=U175,20,CL3:R,8

362=P142,25,CL15:R,4

363=P142,26,CL15:R,3

368=P142,16,C65793,0

387=P142,17,C66288,0

404=P143,0,CL84:R,1

405=P143,1,CL84:R,2

406=P143,2,CL84:R,3

461=P174,4,C65843,0

493=P0,21,C1084,0

494=U0,21,CL54:R,0

496=P142,0,C66617,0

497=P142,2,C66619,0

512=P142,1,C66618,0

514=P176,0,C66604,0

515=P176,1,C66605,0

516=P176,2,C66606,0

517=P176,3,C66609,0

518=P176,4,C66611,0

519=P176,5,C66612,0

520=P176,6,C66615,0

521=P176,7,C66616,0

522=P2,21,C1084,0

523=U2,21,CL54:R,0

524=P141,17,C65564,0

525=P141,16,C66624,0

526=P141,18,C66623,0

536=P141,1,C65876,0

537=P141,0,C65727,0

538=P141,2,CL15:R,5

553=P142,28,C66322,0

554=P142,29,C66322,0

555=P142,30,C66321,0

556=P142,31,C66321,0

557=U142,29,C66322,0

558=U142,28,C66322,0

559=U142,30,C66321,0

560=U142,31,C66321,0

565=U142,26,CL15:R,3

566=U142,27,CL15:R,3

567=U142,25,CL15:R,4

568=U142,24,CL15:R,4

573=P142,9,CL9:R,1

574=U142,9,CL9:R,1

575=P142,8,CL9:R,1

576=U142,8,CL9:R,1

577=P142,10,CL9:R,2

578=U142,10,CL9:R,2

581=P142,13,C65665,0

582=U142,13,C65665,0

583=P142,12,C1029,0

584=U142,12,C1029,0

585=P142,14,C65664,0

586=U142,14,C65664,0

587=P142,15,C1028,0

588=U142,15,C1028,0

Maybe you could also enable the Lua logging so that we can see what Lua module is crashing and when.

********* LUA: "Linda" Log [from FSUIPC version 4.82] *********

120121 System time = 07/04/2012 11:07:53, Simulator time = 11:06:01 (19:06Z)

120121 HmÃ…`

LUA.0: beginning "D:\Microsoft Flight Simulator X\MMp¦Ä

********* LUA: "ipcReady" Log [from FSUIPC version 4.82] *********

120106 System time = 07/04/2012 11:07:53, Simulator time = 11:06:01 (19:06Z)

120106 ZÃ`

LUA.0: beginning "D:\Microsoft Flight Simulator X\ModuÀAÃ 120106

LUA.0: ended "D:\Microsoft Flight Simulator X\Modules\ipŒÃ‘wÒ¥Eüó‚2¤3 120106 System time = 07/04/2012 11:07:53, Simulator time = 11:06:01 (19:06Z)

********* LUA execution terminated: Log Closed *********

Link to comment
Share on other sites

Here is a start...

Hmm. No clues in the FSUIPC INI or Log files. I don't suppose you can narrow it down?

********* LUA: "Linda" Log [from FSUIPC version 4.82] *********

120121 System time = 07/04/2012 11:07:53, Simulator time = 11:06:01 (19:06Z)

120121 HmÃ…`

LUA.0: beginning "D:\Microsoft Flight Simulator X\MMp¦Ä

********* LUA: "ipcReady" Log [from FSUIPC version 4.82] *********

120106 System time = 07/04/2012 11:07:53, Simulator time = 11:06:01 (19:06Z)

120106 ZÃ`

LUA.0: beginning "D:\Microsoft Flight Simulator X\ModuÀAÃ 120106

LUA.0: ended "D:\Microsoft Flight Simulator X\Modules\ipŒÃ‘wÒ¥Eüó‚2¤3 120106 System time = 07/04/2012 11:07:53, Simulator time = 11:06:01 (19:06Z)

********* LUA execution terminated: Log Closed *********

It appears that neither Lua program actually got started. I'm a bit puzzled over those weird characters, in


120121 HmÃ…`

[/CODE]

and

[CODE]
120106 ZÃ`
LUA.0: beginning "D:\Microsoft Flight Simulator X\ModuÀAÃ 120106
LUA.0: ended "D:\Microsoft Flight Simulator X\Modules\ipŒÃ‘wÒ¥Eüó‚2¤3

[/CODE]

Do you know what those strange fielnames are supposed to be?

I suspect the crash is simply due to something odd that LINDA is doing. One other change i forgot to mention is that Lua DLLs are now searched in the Modules\DLL folder using the environment "PATH" statement. I'm wondering if this somehow affects Linda. Do you have a Modules\DLLfolder? If so, what is in it?

I think we'll certainly need a LINDA person to help here. I got completely lost last time I looked at a LINDA problem. I don't understand anything it is doing, to be honest.

Regards

Pete

Link to comment
Share on other sites

Do you know what those strange fielnames are supposed to be?

I also do not know what those strange characters are in the file names. It appears to me as though they are corrupted.

Do you have a Modules\DLLfolder? If so, what is in it?

I do NOT have a Modules\DLL folder.

I do have a number of DLL files in the Modules folder:

A2A_Feel.dll

AccuFeelMenu.dll

ActiGate.dll

FSSimTimMenu.dll

FSUIPC.DLL

FSUIPC4.dll

GFDev.dll

pfcfsx.dll

sb3gaugebridge.dll

ViMaCore2004.DLL

ViMaIScn.DLL

ViMaNET.DLL

Link to comment
Share on other sites

I also do not know what those strange characters are in the file names. It appears to me as though they are corrupted.

Yes, they certainly are, that's why I asked you what the true names of those Lua files was. What was being attempted there?

I think I asked you for the wrong logging -- I would like to see the FSUIPC4 log file itself with "Debug/Trace Lua plug-ins" checked, not "Log Lua plug-ins separately". That would give us a complete view of what those plug-ins were trying to do at the time of the crash.

I would also need to see the plug-ins involved at that time. If this all looks like getting a bit big for a message, please just zip them up and send to petedowson@btconnect.com.

I do have a number of DLL files in the Modules folder:

Wll, of those some versions of Actigate are known to have compatibility problems, but only older versions I think, and FSUIPC.DLL is the FS9 and before version of FSUIPC and certainly is wanted there at all. Nor, I think, should ViMaCore2004.DLL which is probably the 2004 version.

And, please, please, do find the details of the crash in the Windows error log. I need the module name and offset and error code of the crash.

Regards

Pete

Link to comment
Share on other sites

Please direct me as to where to find this info.

Just click the Start button in Win7, and type "events", and Enter. The Event Viewer will appear. Select Windows Logs then Application. Scroll down the list of application events which will appear until you find an "Error" level one with "Application Error" listed as the Source. Look through those until you find the Faulting application identified as FSX.EXE. If you know the date and rough time of the last one you can find it quickly as that is displayed too.

In the details there will be the faulting module name, offset and excepption code. Or just select al the displayed details and copy/paste into a message here.

Pete

Link to comment
Share on other sites

Pete,

Here is the Windows Log:

Faulting application name: fsx.exe, version: 10.0.61637.0, time stamp: 0x46fadb14

Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000

Exception code: 0xc0000005

Fault offset: 0x00000000

Faulting process id: 0x8a4

Faulting application start time: 0x01cd165999cc10c7

Faulting application path: D:\Microsoft Flight Simulator X\fsx.exe

Faulting module path: unknown

Report Id: 6941ae98-824d-11e1-a755-001fd081ae61

I did some further testing and I think I have narrowed things down a little.

The line from the ipcReady.log with the strange characters in the filename references a lua script (setupDuke.lua) which contains the following entries:

-- Load Linda

ipc.runlua("Linda")

-- Instruments using GF-166 displays

ipc.runlua("FT-Timer.lua")

ipc.runlua("Duke-ADF1.lua")

ipc.runlua("Duke-FL-XPDR.lua")

ipc.runlua("DME-Select.lua")

ipc.runlua("Altimeter.lua")

ipc.runlua("CabinAlt.lua")

ipc.runlua("Oil-Temp-Press.lua")

-- LEDs of GF-RP48 modules

ipc.runlua("Flaps.lua") -- Flaps

ipc.runlua("ATC-LED.lua") -- ATC LEDs

ipc.runlua("GPS-LED.lua") -- GPS LEDs

ipc.runlua("GF-LEDs.lua") -- Sound/Ident LEDs

ipc.runlua("ATC-Popup-LED.lua")

-- GoFlight Modules Cold & Dark

ipc.runlua("GF-Dark.lua")

Suspecting that one or more of the above LUA scripts is causing the problem, I "commented out" (--) all of the lines. I then "uncommented" each line one-by-one followed by a launch of FSX.

The ONLY line that is causing the above issue is: ipc.runlua("linda"). Below is the Linda.log

********* LUA: "Linda" Log [from FSUIPC version 4.82] *********

197980 System time = 09/04/2012 10:07:58, Simulator time = 10:04:49 (18:04Z)

197980 ˜±t`

LUA.0: beginning "D:\Microsoft Flight Simulator X\M2°­2

As a final check, I "commented out" --ipc.runlua("linda"), but "uncommented" all of the other ipc.runlua entries. FSX launched without issue.

So unless I am missing something else, it appears to me that the issue has something to do with the launch of LINDA.

Link to comment
Share on other sites

Here is the Windows Log

...

Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000

Exception code: 0xc0000005

Fault offset: 0x00000000

Faulting module path: unknown

Well, that's totally unhelpful. I've never seen one like that before -- not even knowing which module crashed! Are there no others with decent information?

The line from the ipcReady.log with the strange characters in the filename references a lua script (setupDuke.lua) which contains the following entries:

Good grief! 16 different plug-ins all trying to start at the same time?

The ONLY line that is causing the above issue is: ipc.runlua("linda"). Below is the Linda.log

********* LUA: "Linda" Log [from FSUIPC version 4.82] *********

197980 System time = 09/04/2012 10:07:58, Simulator time = 10:04:49 (18:04Z)

197980 ˜±t`

LUA.0: beginning "D:\Microsoft Flight Simulator X\M2°­2

As a final check, I "commented out" --ipc.runlua("linda"), but "uncommented" all of the other ipc.runlua entries. FSX launched without issue.

So unless I am missing something else, it appears to me that the issue has something to do with the launch of LINDA

Okay, so now please get the log I requested a while ago, wqith all those other entries commented out and only the Linda one loading. First, though, UNCHECK the separate Lua logging option and CHECK the Lua trace option instead. The logging will go to the main FSUIPC log. Zip it up along with Linda.lua and send it as requested earlier.

Regards

Pete

Link to comment
Share on other sites

Hello Pete,

Seems I'm seeing similar corruptions in the LUA log file although I do not think FSUIPC is contributing to CTDs in my case (and maybe this is an issue for a separate thread).

[FSX, WIN 7(x64), FSUIPC Ver 4.820, PMDG737NGX, GoFlight MCPPro, Steve Munn's NGX_AUTO.LUA]

Yesterday, checking FSUIPC.ini for 737NGX settings, I happened to look at the NGX_Auto.log file.(Not sure why I'm logging NGX_AUTO.LUA, but that's not important at the moment.) It contained the same odd corruptions discussed in the earlier postings. It starts with the upgrade from Ver4.811 to Ver4.812 and continues thru Ver 4.820. Here are the lines from NGX_AUTO.log showing the change:

********* LUA: "NGX_AUTO" Log [from FSUIPC version 4.811] *********

823108 System time = 22/03/2012 12:32:51, Simulator time = 15:03:05 (14:03Z)

823108 LUA: beginning "F:\FlightsimX\Modules\NGX_AUTO.lua"

********* LUA: "NGX_AUTO" Log [from FSUIPC version 4.812] *********

96222 System time = 26/03/2012 13:31:01, Simulator time = 15:10:27 (14:10Z)

96222 8@z`

LUA.0: beginning "F:\FlightsimX\Moduz

Since I suspect FSX did not terminate normally in both of the above instances I did a more controlled test today using first FSUIPC 4.811 and then FSUIPC Ver 4.820. Loaded FSX, then the PMDG737NGX, manipulated several GoFlight MCPPro dials/switches and exited FSX (FSX terminated normally). Here are the lines from NGX_AUTO.log again showing the differences between Ver 4.811 and Ver 4.820. The lines are un-edited direct copies from the log file.:

********* LUA: "NGX_AUTO" Log [from FSUIPC version 4.811] *********

53290 System time = 11/04/2012 12:25:10, Simulator time = 14:18:10 (18:18Z)

53290 LUA: beginning "F:\FlightsimX\Modules\NGX_AUTO.lua"

162475 >>> Thread forced exit <<<

162475 System time = 11/04/2012 12:26:59, Simulator time = 14:19:50 (18:19Z)

********* LUA execution terminated: Log Closed *********

********* LUA: "NGX_AUTO" Log [from FSUIPC version 4.82] *********

80575 System time = 11/04/2012 12:33:51, Simulator time = 14:18:10 (18:18Z)

80575 ?Å’`

LUA.0: beginning "F:\FlightsimX\Modur 213129

>>> Thread forc 213129 System time = 11/04/2012 12:36:03, Simulator time = 14:20:15 (18:20Z)

********* LUA execution terminated: Log Closed *********

Regards

Claude

Edited by ClaudeMan
Link to comment
Share on other sites

Seems I'm seeing similar corruptions in the LUA log file

Thanks for the data. I'll try to check it out, but none of my Lua programs exhibit such oddities. I'm still hoping someone with these problems will actually use the Lua tracing option INSTEAD of the separate Lua log option, as this should show me a lot more. That's why I added it! I have asked several times but no one has yet done this! :-(

Pete

Link to comment
Share on other sites

Pete,

I just created an FSUIPC log file with "Debug/Trace Lua plug-ins" check and NOT "Log Lua plug-ins". I've zipped it in the file "ClaudeTraceLogs.zip" and will shortly send it to you via email. Although you may already have it somewhere, I also included Steve Munn's Lua file as well. Hope this helps.

Regards

Claude

Link to comment
Share on other sites

Pete,

Sorry for not getting back to you sooner. As I stated previously, I was away from my computer for a few days.

My current "working" version of FSUIPC is 4.811. The only LUA logging feature I see in FSUIPC is for "LUA program logging." If "Debug/Trace Lua plug-ins" is a feature that has been added since 4.811, then I am afraid I may not be able to help. Any version of FSUIPC beyond 4.811 shuts FSX down before I can even access the FSUIPC setup. If there is another way to access/activate this feature without having to go into FSUIPC, then please advise.

Dan

Link to comment
Share on other sites

My current "working" version of FSUIPC is 4.811. The only LUA logging feature I see in FSUIPC is for "LUA program logging." If "Debug/Trace Lua plug-ins" is a feature that has been added since 4.811, then I am afraid I may not be able to help. Any version of FSUIPC beyond 4.811 shuts FSX down before I can even access the FSUIPC setup

Since the point of the tracing is to find out why it is crashing, it isn't much good doing in in 4.811 even if the feature existed back then! ;-)

If there is another way to access/activate this feature without having to go into FSUIPC, then please advise.

There are two ways. One is to enable it one a load of FSX which doesn't crash -- i.e. with Linda not loading (I think you identified that already, did you not?

The ONLY line that is causing the above issue is: ipc.runlua("linda").

The other, yes, it to add the line into the INI beforehand. the entry needed is. as always, documented of course -- it is in Item 7 in the changes list included with the updated FSUIPC4. To save you looking it up it is

DebugLua=Yes

in the [General] section.

Please use version 4.821 now, not 4.820. See the Download Links subforum.

[LATER]

Hold on, don't do anything yet! ClaudeMan sent me logs and the NGCX lua and I've repro'd the odd characters in the Lua logs, and am fixing that now -- it'll be in 4.822 in an hour or less.

Now at present i don't see how this would cause your specific problems if you don't normally run with that separate Lua logs option selected -- because then the log entries made by LINDA would go to the main FSUIPC4 log file and that doesn't have a problem.

So, my question: do you always run with Lua logging separately enabled? If so, maybe you can try again, with 4.820 or 4.821, with no logging options checked (just remove the LogLua line from the FSUIPC4.INI file)?

Maybe the crash problem is being caused by the corrupt logging, and is exacerbated in the case of LINDA because of the sheer number of log messages it seems to produce?

Anyway, I'll fix the Lua logging now and release that as 4.822, interim update. Once I know one way of the other about the crash I'll decide how to proceed.

I'm away Friday-Sunday inclusive, so if 4.822 doesn't fix it it might be next week now.

[LATER STILL]

Okay, 4.822 is up. Please go ahead, make it crash. If it does please only then get me that trace logging. If it is okay, please advise. thanks.

Regards

Pete

Link to comment
Share on other sites

I've noticed with this latest build 4822 that in FS Control sorting of the drop down menus appear to be broken e.g. if I was looking for throttle1 cut I would highlight the drop down list then type "T" "H" and that would jump me to throttle in the list. Now when I do this is just shows "Takeoff assist arm set" and absolutely nothing else in the list at all as soon as I press "T", adding any further letters does nothing.

Link to comment
Share on other sites

I've noticed with this latest build 4822 that in FS Control sorting of the drop down menus appear to be broken e.g. if I was looking for throttle1 cut I would highlight the drop down list then type "T" "H" and that would jump me to throttle in the list. Now when I do this is just shows "Takeoff assist arm set" and absolutely nothing else in the list at all as soon as I press "T", adding any further letters does nothing.

Strange. I've added " <custom Control>" but that shouldn't affect the sorting. All that stuff is standard Windows code, not mine, but I'll take a look. Thanks.

[LATER]

Fixed in 4.823, now up. I stupidly mixed up "killfocus" notifications with "selchange" notifications!

Pete

Link to comment
Share on other sites

Thanks Pete I'll try it after dinner. One comment, when making additions to your posts could you please just make a completely new post rather than editing the last post you made, the reason I ask for this is that the forum software does not send an email notification to anyone following the thread if you just edit a previous post. I only found out about your later comments after following a link posted by Artem the developer of LINDA at AVSIM's forum 5 days later, lol. Thanks anyway.

Link to comment
Share on other sites

One comment, when making additions to your posts could you please just make a completely new post rather than editing the last post you made, the reason I ask for this is that the forum software does not send an email notification to anyone following the thread if you just edit a previous post.

Oh, I didn't know that! Sorry. I only do it when my post is still the last in the thread.

Pete

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.