XML.DLL Help

[skewr]

HI everyone.

I have the registered latest version of FSUPIC. I purchased and installed "Fly the Maddog" for FSX. I have a peculiar problem.

I can EITHER have the Maddog in the addons menu OR FSCopilot when I manipulate my XML.DLL file, but not both!

Does anyone have any ideas?

I run FSX on the E drive so it's (E:\FSX)

Thanks in advance for any help. (I've attached the file as well)

DLL.XML

[Ian P]

Can you post the version number of FSUIPC that you have installed, please, rather than "the latest"?

Pete'll only ask you to do that shortly, anyway. ;)

Cheers,

Ian P.

[skewr]

Of course. My apologies. It is 4.853.

Also I noticed that FSInn (edited. replaced the word "FSinn" from "Simconnect") no longer autostarts which may not mean anything if the .dll can't run...

Thanks.

Edited November 18, 2012 by skewr

[Pete Dowson]

I have the registered latest version of FSUPIC. I purchased and installed "Fly the Maddog" for FSX. I have a peculiar problem.

I can EITHER have the Maddog in the addons menu OR FSCopilot when I manipulate my XML.DLL file, but not both!

Does anyone have any ideas?

Not sure why you post here, as this is nothing to do with FSUIPC -- neither of those programs use FSUIPC at all as far as I'm aware.

Your XML.DLL looks fine. I can only think that there's some conflict between the MadDog DLL and FSCopilot. Maybe you can swap them over in the DLL so that FSCopilot loads before MadDog? Otherwise I think you need support from one or the other. You might want to get a SimConnect log file as this may help them work it out -- there's a thread in the FAQ subforum here which tells you how.

Regards

Pete

[skewr]

Thank you.

The reason I posted here as I spent HOURS trying to get both to function. As Leanardo and FSCopliot appear in the "Modules" folder I thought here would be a good place to check. (Especially since moving files above and below FSUIPC allowed one of the modules to work).

Thank you for checking the .dll and I'll continue to search for a problem fix.

Thanks again.

[Pete Dowson]

As Leanardo and FSCopliot appear in the "Modules" folder I thought here would be a good place to check. (Especially since moving files above and below FSUIPC allowed one of the modules to work).

I can only repeat my suggestions -- try different orders of loading, and check the SimConnect log -- there may well be an explanatory error message in there.

Regards

Pete

[skewr]

Thank you again for the very fast reply.

The output was as follows: (I did not see FSUIPC process the Leanardo dll or the FScopliot. But with my total lack of knowledge they made not need to be touched by FSUIPC)

0.00000 SimConnect version 10.0.61259.0

0.00606 Server: Scope=local, Protocol=Pipe, Name=\\.\pipe\Microsoft Flight Simulator\SimConnect, MaxClients=64

0.00995 Server: Scope=local, Protocol=IPv6, Address=::1, Port=50460, MaxClients=64

0.01270 Server: Scope=local, Protocol=IPv4, Address=127.0.0.1, Port=50461, MaxClients=64

0.11914 DLL Loaded: Path="PMDG\DLLs\PMDGOptions.dll" Version="10.0.61355.62"

0.12566 DLL Loaded: Path="PMDG\DLLs\PMDGEvents.dll" Version="10.0.61355.62"

0.13791 DLL Loaded: Path="PMDG\DLLs\PMDGSounds.dll" Version="10.0.61355.62"

0.13970 DLL Loaded: Path="FeelThere\E170\EJetH.dll" Version="1.3.0.1"

0.14123 Panels data export found and set to 20B319D8

0.14149 DLL Loaded: Path="PMDG\DLLs\PMDG_HUD_interface.dll" Version="2.0.0.1"

0.14448 DLL Loaded: Path="VistaMare\ViMaCoreX.dll" Version="10.0.0.13"

0.14749 Panels data export found and set to 20B319D8

0.18380 DLL Loaded: Path="Modules\A2A_Feel.dll" Version="<Unknown>"

0.18584 Panels data export found and set to 20B319D8

0.18613 DLL Loaded: Path="Modules\AccuFeelMenu.dll" Version="0.1.0.0"

3.19970 DLL Loaded: Path="E:\FSX\Modules\LeonardoSH.dll" Version="<Unknown>"

3.33482 DLL Loaded: Path="Modules\LVLD.dll" Version="1.4.2.1"

3.34287 Panels data export found and set to 20B319D8

26.75454 DLL Loaded: Path="E:\FSX\Modules\FSCopilot.dll" Version="1.2007.508.1"

26.93620 Panels data export found and set to 20B319D8

27.17068 DLL Loaded: Path="Modules\FSUIPC4.dll" Version="4.8.5.3"

> 30.23040 [ 0, 1]Open: Version=0x00000004 Name="PMDG_Options"

> 30.23043 [ 1, 1]Open: Version=0x00000004 Name="PMDG_Events"

> 30.23044 [ 2, 1]Open: Version=0x00000004 Name="PMDG_Sounds"

> 30.23045 [ 3, 1]Open: Version=0x00000004 Name="LegacyXHUD"

> 30.23046 [ 3, 2]SubscribeToSystemEvent:EventID=0, SystemEventName="FlightLoaded"

> 30.23047 [ 4, 1]Open: Version=0x00000004 Name="PMDG NGX HUD interface"

> 30.23048 [ 4, 2]SubscribeToSystemEvent:EventID=1, SystemEventName="FlightLoaded"

> 30.23049 [ 5, 1]Open: Version=0x00000004 Name="ViMaCore"

> 30.23049 [ 6, 1]Open: Version=0x00000004 Name="A2A Feel"

I'll heed your advice and take the above to a different venue. If all else fails perhaps a reinstall of SimConnect as I have no idea how to proceed.

Best Regards

Edited November 19, 2012 by skewr

[Pete Dowson]

The output was as follows: (I did not see FSUIPC process the Leanardo dll or the FScopliot. But with my total lack of knowledge they made not need to be touched by FSUIPC)

You are rather confused. FSUIPC has nothing whatsoever to do with any of your other DLLs. The DLL.XML file is processed by SimConnect, which is nothing to do with FSUIPC but is part of FSX. And you can see that the Mad Dog DLL has indeed been loaded by SimConnect, here:

3.19970 DLL Loaded: Path="E:\FSX\Modules\LeonardoSH.dll" Version="<Unknown>"

I'm afraid you are posting in the wrong place. Whichever of your programs is not working, please try ther own support. And send them the Log -- there may be an error reported later in the log when Mad Dog tries to create its menu entry.

I can only really support my own programs. I do not own or use either Mad Dog or FSCopilot / FSInn.

Regards

Pete