Jump to content

Registration Issue Key Code Not Recognized


Recommended Posts

Have been a user of the registered version of FSUIPC for many years and reinstalled it through the many versions of P3D without issue.

I did a computer overhaul and installed a new SSD as well as motherboard, chip and memory.

 

I have successfully reinstalled P3D v2.5 and 3.1 and successfully installed the latest version (4.949) into both.  

When I ask to register it with the current key code I get an error message that reads: "Error, no FSUIPC to check.  Code 16.

I have confirmend my name as the registered one and the email address is correct.  I have checked at Sim Market that my reg key is also correct.

Have attempted to install and register multiple times.

I'm stymied...

 

Ray White

Link to comment
Share on other sites

Have been a user of the registered version of FSUIPC for many years and reinstalled it through the many versions of P3D without issue.

I did a computer overhaul and installed a new SSD as well as motherboard, chip and memory.

 

I have successfully reinstalled P3D v2.5 and 3.1 and successfully installed the latest version (4.949) into both.  

When I ask to register it with the current key code I get an error message that reads: "Error, no FSUIPC to check.  Code 16.

I have confirmend my name as the registered one and the email address is correct.  I have checked at Sim Market that my reg key is also correct.

Have attempted to install and register multiple times.

I'm stymied...

 

Seems that the Installation was not successful, then. Re-running the Installer won't accomplish anything. Please find the Install Log, which will be next to the Installer, wherever you ran it. Paste the log into a message here.

 

Pete

Link to comment
Share on other sites

Thanks for the response. Hope you had a good holiday.

 

Here is the log as requested.

 

Installer for FSUIPC4.DLL version 4.949


Looking in registry for FSX install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
     Parameter"AppPath"
... NOT found! ...

Looking in registry for FSX-SE install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX
     Parameter"Install_Path"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\DovetailGames\FSX
     Parameter"AppPath"
Not there, so looking in:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v1 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v2 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2
     Parameter"SetupPath"
... >>>  OK! FOUND Prepar3D v2!  <<< ...
     SetupPath=C:\Lockheed Martin\Prepar3D v2\

Looking in registry for Prepar3D v3 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3
     Parameter"SetupPath"
... >>>  OK! FOUND Prepar3D v3!  <<< ...
     SetupPath=C:\Lockheed Martin\Prepar3D v3\
===========================================================

INSTALLATION FOR Prepar3D v2:
SetupPath="C:\Lockheed Martin\Prepar3D v2\"
Checking version of the Prepar3D v2 EXE:
... Version 2.5.12946.0  (Need at least 1.0.677.0)
Checking compatibility with installed SimConnect:
Checking if there's already a version of FSUIPC4 installed in:
       C:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.DLL
... Version 4.949 found.
Prepar3D v2 Modules folder already exists.
Okay -- installed FSUIPC4 into "C:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\Ray\AppData\Roaming"
Now finding \Lockheed Martin\Prepar3D v2\Prepar3D.CFG for all users, including this one
Looking in "C:\Users\Administrator\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\All Users\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Default\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Public\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\AppData\Roaming"
Found Prepar3D.CFG in "C:\Users\Ray\AppData\Roaming\Lockheed Martin\Prepar3D v2\Prepar3D.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
     (for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
"Modules\FSUIPC Documents" folder already exists.
Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder:
   Installed "SimConnectP3D2.dll" okay
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "List of FSX and P3D controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "Offset Mapping for PMDG 777X.pdf" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
===========================================================

INSTALLATION FOR Prepar3D v3:
SetupPath="C:\Lockheed Martin\Prepar3D v3\"
Checking version of the Prepar3D v3 EXE:
... Version 3.1.2.15831  (Need at least 1.0.677.0)
Checking compatibility with installed SimConnect:
Checking if there's already a version of FSUIPC4 installed in:
       C:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL
... Version 4.949 found.
Prepar3D v3 Modules folder already exists.
Okay -- installed FSUIPC4 into "C:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\Ray\AppData\Roaming"
Now finding \Lockheed Martin\Prepar3D v3\Prepar3D.CFG for all users, including this one
Looking in "C:\Users\Administrator\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\All Users\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Default\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Public\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\AppData\Roaming"
Found Prepar3D.CFG in "C:\Users\Ray\AppData\Roaming\Lockheed Martin\Prepar3D v3\Prepar3D.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
     (for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
"Modules\FSUIPC Documents" folder already exists.
Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder:
   Installed "SimConnectP3D2.dll" okay
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "List of FSX and P3D controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "Offset Mapping for PMDG 777X.pdf" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
===========================================================

All installer tasks completed.
Registration check for FSUIPC4 was cancelled or failed! (result code 10)
 

Link to comment
Share on other sites

Thanks for the response. Hope you had a good holiday.

 

Here is the log as requested.

 

 

Hmm. Nothing wrong there.

 

The error you report occurs if you have not previously Regstered and, instead of checking "Just enter new registration" you wrongly checked the "Check existing registration" option. Can you please confirm you are actually following the dialogue correctly?

 

Pete

Link to comment
Share on other sites

Good Day Peter:

 

Have run P3Dv2 and the unregistered version is there.  Have also opened the v2 modules folder and all files seem to be present. Took a screenshot of the Module Folder but am not sure how to attach it, sorry.

Just to be sure, I re-ran the installer and made sure I checked "Just enter new registration" and got the same error.  Then tried "Check existing.." with the same result.

Link to comment
Share on other sites

Have run P3Dv2 and the unregistered version is there.  Have also opened the v2 modules folder and all files seem to be present. Took a screenshot of the Module Folder but am not sure how to attach it, sorry.

Just to be sure, I re-ran the installer and made sure I checked "Just enter new registration" and got the same error.  Then tried "Check existing.." with the same result.

 

It sounds like both options are selecting the "just check" entry. When you looked at the contents of the folder, was there an FSUIPC4.KEY file there?

 

This has not occurred before, and I can see no possible reason for it. The ONLY way error code 16 can occur is when the Installer is simply checking the existing KEY file, and finding no FSUIPC entry. (code 32 = no WideFS, and 48 = neither, assuming you ask also for WideFS checking).

 

I'll make an installer with additional logging to see what is going on.

 

Pete

Link to comment
Share on other sites

I'll make an installer with additional logging to see what is going on.

 

Pete

 

Please download this updated installer and try that. It simply adds log entries about exactly what it thinks is going on at the registration dialogue stage.

 

Install_FSUIPC4949_.zip

 

Then let me see the Installation log please.

 

Pete

Link to comment
Share on other sites

Sorry, no go!

Here is the install log it generated:

 

Installer for FSUIPC4.DLL version 4.949


Looking in registry for FSX install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
     Parameter"AppPath"
... NOT found! ...

Looking in registry for FSX-SE install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX
     Parameter"Install_Path"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\DovetailGames\FSX
     Parameter"AppPath"
Not there, so looking in:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v1 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v2 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2
     Parameter"SetupPath"
... >>>  OK! FOUND Prepar3D v2!  <<< ...
     SetupPath=C:\Lockheed Martin\Prepar3D v2\

Looking in registry for Prepar3D v3 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3
     Parameter"SetupPath"
... >>>  OK! FOUND Prepar3D v3!  <<< ...
     SetupPath=C:\Lockheed Martin\Prepar3D v3\
===========================================================

INSTALLATION FOR Prepar3D v2:
SetupPath="C:\Lockheed Martin\Prepar3D v2\"
Checking version of the Prepar3D v2 EXE:
... Version 2.5.12946.0  (Need at least 1.0.677.0)
Checking compatibility with installed SimConnect:
Checking if there's already a version of FSUIPC4 installed in:
       C:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.DLL
... Version 4.949 found.
Prepar3D v2 Modules folder already exists.
Okay -- installed FSUIPC4 into "C:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\Ray\AppData\Roaming"
Now finding \Lockheed Martin\Prepar3D v2\Prepar3D.CFG for all users, including this one
Looking in "C:\Users\Ray\AppData\Roaming"
Found Prepar3D.CFG in "C:\Users\Ray\AppData\Roaming\Lockheed Martin\Prepar3D v2\Prepar3D.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
     (for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
Looking in "C:\Users\Ray\Application Data\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\CH Control Manager\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Contacts\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Cookies\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Desktop\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Documents\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Downloads\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Dropbox\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Favorites\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Intel\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\IntelGraphicsProfiles\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Links\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Local Settings\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Music\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\My Documents\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\NetHood\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Pictures\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\PrintHood\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Recent\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Saved Games\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Searches\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\SendTo\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Start Menu\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Templates\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Videos\Roaming"
 ... No Prepar3D.CFG there
"Modules\FSUIPC Documents" folder already exists.
Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder:
   Installed "SimConnectP3D2.dll" okay
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "List of FSX and P3D controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "Offset Mapping for PMDG 777X.pdf" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
===========================================================

INSTALLATION FOR Prepar3D v3:
SetupPath="C:\Lockheed Martin\Prepar3D v3\"
Checking version of the Prepar3D v3 EXE:
... Version 3.1.2.15831  (Need at least 1.0.677.0)
Checking compatibility with installed SimConnect:
Checking if there's already a version of FSUIPC4 installed in:
       C:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL
... Version 4.949 found.
Prepar3D v3 Modules folder already exists.
Okay -- installed FSUIPC4 into "C:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\Ray\AppData\Roaming"
Now finding \Lockheed Martin\Prepar3D v3\Prepar3D.CFG for all users, including this one
Looking in "C:\Users\Ray\AppData\Roaming"
Found Prepar3D.CFG in "C:\Users\Ray\AppData\Roaming\Lockheed Martin\Prepar3D v3\Prepar3D.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
     (for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
Looking in "C:\Users\Ray\Application Data\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\CH Control Manager\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Contacts\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Cookies\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Desktop\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Documents\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Downloads\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Dropbox\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Favorites\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Intel\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\IntelGraphicsProfiles\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Links\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Local Settings\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Music\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\My Documents\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\NetHood\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Pictures\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\PrintHood\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Recent\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Saved Games\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Searches\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\SendTo\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Start Menu\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Templates\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Videos\Roaming"
 ... No Prepar3D.CFG there
"Modules\FSUIPC Documents" folder already exists.
Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder:
   Installed "SimConnectP3D2.dll" okay
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "List of FSX and P3D controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "Offset Mapping for PMDG 777X.pdf" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
===========================================================

All installer tasks completed.
Registration dialog exit: selected  FSUIPC CHECK
Checking FSUIPC registration ...
Registration check for FSUIPC4 was cancelled or failed! (result code 10)

*************** End of Install Log ***************
 

Link to comment
Share on other sites

Sorry, no go!

 

What did you expect? As I carefully explained, it simply adds more logging. And this is it:

 

Registration dialog exit: selected  FSUIPC CHECK

 

Which does definitively show that you had FSUIPC4 checked and the Check existing registration(s) selection checked. There's really no way possibly for the above log to show what it is showing without that selection.

 

Pete

Link to comment
Share on other sites

I simply expect a resolution to the problem sir.  No disrespect intended.  I unfortunately do not have a great deal of technical ability, I am only trying my best to provide you with the information you request in order to try and help to resolve the issue.

 

R.

Link to comment
Share on other sites

I simply expect a resolution to the problem sir.  

 

Yes, for which I altered the Installer to diagnose exactly what is wrong and informed you of the results.  Please follow my recommendations:

 

1. Check "FSUIPC4" (left-most of top three selectors). Make sure the black blob is in the white circle.

2. Check "Just enter new registration(s)" (bottom onr of three selectors below. Again make sure the black blob is in that circle.

3. Double check the above.

4. Click "Go ahead".

 

That's it. That's what everyone does and it has never failed yet in the 12 years or more of FSUIPC registrations.

 

Regards

Pete

Link to comment
Share on other sites

Ran the installer provided following all instructions.  Sorry to say with the same result.  Got the following error message: "Error: Cancelled FSUIPC entry

"

 

Well, that's different at least.

 

That can only occur when you click on the "Not now" button.  Are you using a mouse or trying to select these things on the Keyboard? I've never known anyone before in 12 years with such elementary problems. If you are trying to do it via keyboard only, let me know. I think it gets quite difficult to ensure to select the correct things.

 

Anyway, please show me the log. I did add the extra logging details so it would help, so the log is still needed otherwise that exercise was pointless.

 

Pete

Link to comment
Share on other sites

Mouse only.  I have not had this happen since I purchased the registered version in 2011! I really don't like to be the "only one in 12 years either"

In any even, on with the quest, here is the log from the installer provided:

 

Installer for FSUIPC4.DLL version 4.949


Looking in registry for FSX install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
     Parameter"AppPath"
... NOT found! ...

Looking in registry for FSX-SE install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX
     Parameter"Install_Path"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\DovetailGames\FSX
     Parameter"AppPath"
Not there, so looking in:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v1 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v2 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2
     Parameter"SetupPath"
... >>>  OK! FOUND Prepar3D v2!  <<< ...
     SetupPath=C:\Lockheed Martin\Prepar3D v2\

Looking in registry for Prepar3D v3 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3
     Parameter"SetupPath"
... >>>  OK! FOUND Prepar3D v3!  <<< ...
     SetupPath=C:\Lockheed Martin\Prepar3D v3\
===========================================================

INSTALLATION FOR Prepar3D v2:
SetupPath="C:\Lockheed Martin\Prepar3D v2\"
Checking version of the Prepar3D v2 EXE:
... Version 2.5.12946.0  (Need at least 1.0.677.0)
Checking compatibility with installed SimConnect:
Checking if there's already a version of FSUIPC4 installed in:
       C:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.DLL
... Version 4.949 found.
Prepar3D v2 Modules folder already exists.
Okay -- installed FSUIPC4 into "C:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\Ray\AppData\Roaming"
Now finding \Lockheed Martin\Prepar3D v2\Prepar3D.CFG for all users, including this one
Looking in "C:\Users\Ray\AppData\Roaming"
Found Prepar3D.CFG in "C:\Users\Ray\AppData\Roaming\Lockheed Martin\Prepar3D v2\Prepar3D.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
     (for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
Looking in "C:\Users\Ray\Application Data\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\CH Control Manager\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Contacts\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Cookies\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Desktop\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Documents\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Downloads\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Dropbox\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Favorites\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Intel\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\IntelGraphicsProfiles\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Links\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Local Settings\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Music\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\My Documents\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\NetHood\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Pictures\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\PrintHood\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Recent\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Saved Games\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Searches\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\SendTo\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Start Menu\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Templates\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Videos\Roaming"
 ... No Prepar3D.CFG there
"Modules\FSUIPC Documents" folder already exists.
Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder:
   Installed "SimConnectP3D2.dll" okay
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "List of FSX and P3D controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "Offset Mapping for PMDG 777X.pdf" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
===========================================================

INSTALLATION FOR Prepar3D v3:
SetupPath="C:\Lockheed Martin\Prepar3D v3\"
Checking version of the Prepar3D v3 EXE:
... Version 3.1.2.15831  (Need at least 1.0.677.0)
Checking compatibility with installed SimConnect:
Checking if there's already a version of FSUIPC4 installed in:
       C:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL
... Version 4.949 found.
Prepar3D v3 Modules folder already exists.
Okay -- installed FSUIPC4 into "C:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\Ray\AppData\Roaming"
Now finding \Lockheed Martin\Prepar3D v3\Prepar3D.CFG for all users, including this one
Looking in "C:\Users\Ray\AppData\Roaming"
Found Prepar3D.CFG in "C:\Users\Ray\AppData\Roaming\Lockheed Martin\Prepar3D v3\Prepar3D.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
     (for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
Looking in "C:\Users\Ray\Application Data\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\CH Control Manager\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Contacts\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Cookies\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Desktop\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Documents\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Downloads\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Dropbox\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Favorites\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Intel\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\IntelGraphicsProfiles\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Links\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Local Settings\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Music\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\My Documents\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\NetHood\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Pictures\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\PrintHood\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Recent\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Saved Games\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Searches\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\SendTo\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Start Menu\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Templates\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Ray\Videos\Roaming"
 ... No Prepar3D.CFG there
"Modules\FSUIPC Documents" folder already exists.
Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder:
   Installed "SimConnectP3D2.dll" okay
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "List of FSX and P3D controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "Offset Mapping for PMDG 777X.pdf" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
===========================================================

All installer tasks completed.
Registration dialog exit: selected  FSUIPC REGISTER
Providing FSUIPC registration dialogue ...
Registration for FSUIPC4 was cancelled or failed! (result code 40)

*************** End of Install Log ***************

Link to comment
Share on other sites

Mouse only.  I have not had this happen since I purchased the registered version in 2011!

 

If you already had a registered install I don't really understand why you are trying to re-register?***

And there's been no change in the process in all the years from and including 2011.

 

In any even, on with the quest, here is the log from the installer provided:

 

Good. Progress then! ;-)

 

Registration dialog exit: selected  FSUIPC REGISTER

Providing FSUIPC registration dialogue ...

Registration for FSUIPC4 was cancelled or failed! (result code 40)

 

Okay, so this time you did actually select the correct option "Just enter new registration(s)". So, that's better. Well done!

 

And you got the registration dialogue. So now you have to enter all three parts, EXACTLY as your original registration and as files on SimMarket. If there is any error on any of the three entries, the registration will fail.

 

(BTW if you still have the original registration file (FSUIPC4.KEY), in a backup perhaps, you can simply copy that into the FS Modules folder instead. I know most folks don't bother with backups, but it is always recommended, especially for things like Registrations.).

 

Pete

 

*** Sorry, reading back to  your first post I see you were starting over with new disks etc.

Link to comment
Share on other sites

"Okay, so this time you did actually select the correct option "Just enter new registration(s)". So, that's better. Well done!"    Yes ,did that, as I have been doing all along.


 


Have gone to Sim Market and confirmed my info:  Ray White   dnrwhite@bellaliant.net and code :XXXXXXXXXXXX   When I select "Go Ahead"  it fills the name and email correctly.  Then I paste my code as shown and get the results we have been experiencing!  Here is a copy of the contents from the FSUIPC4.key file:  


[user]

Name=Ray White

Address=dnrwhite@bellaliant.net

 

Just tried another attempt and typed in the code rather than paste it.  Still error code 64 came up.  Sorry to be such a a bother.  Just in case it helps, here is the newest log file:

 

 

 


nstaller for FSUIPC4.DLL version 4.949

 

 

Looking in registry for FSX install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0

     Parameter"SetupPath"

Not there, so looking in:

     HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0

     Parameter"AppPath"

... NOT found! ...

 

Looking in registry for FSX-SE install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX

     Parameter"Install_Path"

Not there, so looking in:

     HKEY_CURRENT_USER\SOFTWARE\DovetailGames\FSX

     Parameter"AppPath"

Not there, so looking in:

     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0

     Parameter"SetupPath"

Not there, so looking in:

     HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0

     Parameter"AppPath"

... NOT found! ...

 

Looking in registry for Prepar3D v1 install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D

     Parameter"SetupPath"

Not there, so looking in:

     HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D

     Parameter"AppPath"

... NOT found! ...

 

Looking in registry for Prepar3D v2 install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2

     Parameter"SetupPath"

... >>>  OK! FOUND Prepar3D v2!  <<< ...

     SetupPath=C:\Lockheed Martin\Prepar3D v2\

 

Looking in registry for Prepar3D v3 install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3

     Parameter"SetupPath"

... >>>  OK! FOUND Prepar3D v3!  <<< ...

     SetupPath=C:\Lockheed Martin\Prepar3D v3\

===========================================================

 

INSTALLATION FOR Prepar3D v2:

SetupPath="C:\Lockheed Martin\Prepar3D v2\"

Checking version of the Prepar3D v2 EXE:

... Version 2.5.12946.0  (Need at least 1.0.677.0)

Checking compatibility with installed SimConnect:

Checking if there's already a version of FSUIPC4 installed in:

       C:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.DLL

... Version 4.949 found.

Prepar3D v2 Modules folder already exists.

Okay -- installed FSUIPC4 into "C:\Lockheed Martin\Prepar3D v2\Modules\FSUIPC4.DLL"

Looking for the current user's Application Data path: 

... found as "C:\Users\Ray\AppData\Roaming"

Now finding \Lockheed Martin\Prepar3D v2\Prepar3D.CFG for all users, including this one

Looking in "C:\Users\Ray\AppData\Roaming"

Found Prepar3D.CFG in "C:\Users\Ray\AppData\Roaming\Lockheed Martin\Prepar3D v2\Prepar3D.CFG"

Now checking DLL.XML ...

... There is a previous DLL.XML, checking for FSUIPC4 section.

... FSUIPC4 section already exists but will be replaced.

     (for FSUIPC4, without Loader)

... FSUIPC4 section of DLL.XML written okay

Now checking for a SimConnect.XML file ...

... No SimConnect.XML file found. This is okay.

Looking in "C:\Users\Ray\Application Data\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\CH Control Manager\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Contacts\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Cookies\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Desktop\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Documents\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Downloads\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Dropbox\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Favorites\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Intel\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\IntelGraphicsProfiles\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Links\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Local Settings\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Music\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\My Documents\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\NetHood\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Pictures\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\PrintHood\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Recent\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Saved Games\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Searches\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\SendTo\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Start Menu\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Templates\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Videos\Roaming"

 ... No Prepar3D.CFG there

"Modules\FSUIPC Documents" folder already exists.

Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder:

   Installed "SimConnectP3D2.dll" okay

Now installing additional files into the "Modules\FSUIPC Documents" folder:

   Installed "FSUIPC4 User Guide.pdf" okay

   Installed "FSUIPC4 for Advanced Users.pdf" okay

   Installed "FSUIPC4 History.pdf" okay

   Installed "List of FSX and P3D controls.pdf" okay

   Installed "FSUIPC Lua Library.pdf" okay

   Installed "FSUIPC Lua Plug-Ins.pdf" okay

   Installed "Lua License.pdf" okay

   Installed "Lua Plugins for VRInsight Devices.pdf" okay

   Installed "LuaFileSystem.pdf" okay

   Installed "Example LUA plugins.zip" okay

   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay

   Installed "Offset Mapping for PMDG 737NGX.pdf" okay

   Installed "Offset Mapping for PMDG 777X.pdf" okay

   Installed "FSUIPC4 Offsets Status.pdf" okay

   Installed "Profiles in Separate Files.pdf" okay

===========================================================

 

INSTALLATION FOR Prepar3D v3:

SetupPath="C:\Lockheed Martin\Prepar3D v3\"

Checking version of the Prepar3D v3 EXE:

... Version 3.1.2.15831  (Need at least 1.0.677.0)

Checking compatibility with installed SimConnect:

Checking if there's already a version of FSUIPC4 installed in:

       C:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL

... Version 4.949 found.

Prepar3D v3 Modules folder already exists.

Okay -- installed FSUIPC4 into "C:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL"

Looking for the current user's Application Data path: 

... found as "C:\Users\Ray\AppData\Roaming"

Now finding \Lockheed Martin\Prepar3D v3\Prepar3D.CFG for all users, including this one

Looking in "C:\Users\Ray\AppData\Roaming"

Found Prepar3D.CFG in "C:\Users\Ray\AppData\Roaming\Lockheed Martin\Prepar3D v3\Prepar3D.CFG"

Now checking DLL.XML ...

... There is a previous DLL.XML, checking for FSUIPC4 section.

... FSUIPC4 section already exists but will be replaced.

     (for FSUIPC4, without Loader)

... FSUIPC4 section of DLL.XML written okay

Now checking for a SimConnect.XML file ...

... No SimConnect.XML file found. This is okay.

Looking in "C:\Users\Ray\Application Data\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\CH Control Manager\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Contacts\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Cookies\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Desktop\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Documents\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Downloads\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Dropbox\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Favorites\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Intel\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\IntelGraphicsProfiles\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Links\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Local Settings\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Music\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\My Documents\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\NetHood\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Pictures\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\PrintHood\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Recent\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Saved Games\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Searches\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\SendTo\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Start Menu\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Templates\Roaming"

 ... No Prepar3D.CFG there

Looking in "C:\Users\Ray\Videos\Roaming"

 ... No Prepar3D.CFG there

"Modules\FSUIPC Documents" folder already exists.

Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder:

   Installed "SimConnectP3D2.dll" okay

Now installing additional files into the "Modules\FSUIPC Documents" folder:

   Installed "FSUIPC4 User Guide.pdf" okay

   Installed "FSUIPC4 for Advanced Users.pdf" okay

   Installed "FSUIPC4 History.pdf" okay

   Installed "List of FSX and P3D controls.pdf" okay

   Installed "FSUIPC Lua Library.pdf" okay

   Installed "FSUIPC Lua Plug-Ins.pdf" okay

   Installed "Lua License.pdf" okay

   Installed "Lua Plugins for VRInsight Devices.pdf" okay

   Installed "LuaFileSystem.pdf" okay

   Installed "Example LUA plugins.zip" okay

   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay

   Installed "Offset Mapping for PMDG 737NGX.pdf" okay

   Installed "Offset Mapping for PMDG 777X.pdf" okay

   Installed "FSUIPC4 Offsets Status.pdf" okay

   Installed "Profiles in Separate Files.pdf" okay

===========================================================

 

All installer tasks completed.

Registration dialog exit: selected  FSUIPC REGISTER

Providing FSUIPC registration dialogue ...

Registration for FSUIPC4 was cancelled or failed! (result code 40)

Link to comment
Share on other sites

NEVER EVER publish your registration openly like that. This is the way it gets pirated, and then it has to be withdrawn. I've obliterated it now, hoping I was in time.

 

"Okay, so this time you did actually select the correct option "Just enter new registration(s)". So, that's better. Well done!"    Yes ,did that, as I have been doing all along.

 

I'm sorry, but it is most certainly you who did something different. The software hasn't changed and I assume your system isn't haunted?

 

I've managed to locate your order details on SimMarket (would have been easier with your order number), and you have the email address incorrect!!!!! Just use the correct one!

 

dnrwhite@rogers.com

 

As I said, all three parts must be correct and exactly as first registered! You do seem to have your name right, though (I'm always amazed at how many different ways folks find to spell their name) ;-) ).

 

Pete

Link to comment
Share on other sites

  • 6 years later...

Hi I've instealled FSX with all the SPs installed but not the acceleration pack. I registerd for FS9 many years ago but I've lost my key.  Can you provided me with key please.

 

Log shows.

 

Installer for FSUIPC4.DLL version 4.977


Looking in registry for FSX install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
     Parameter"SetupPath"
... >>>  OK! FOUND FSX!  <<< ...
     SetupPath=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\

Looking in registry for FSX-SE install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX
     Parameter"Install_Path"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\DovetailGames\FSX
     Parameter"AppPath"
Not there, so looking in:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v1 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v2 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v2
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v3 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v3
     Parameter"AppPath"
... NOT found! ...
===========================================================

INSTALLATION FOR FSX:
SetupPath="C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\"
Checking version of the FSX EXE:
... Version 10.0.61472.0  (Need at least 10.0.60905.0)
Checking compatibility with installed SimConnect:
    Looking for SimConnect.dll with "C:\WINDOWS\WinSxS\Fusion\*SimConnect*"
    Found the path, now trying "C:\WINDOWS\WinSxS\Fusion\x86_microsoft.flightsimulator.simconnect_67c7c14424d61b5b_none_48d5d2360f51e4d0\10.0\10.0.60905.0\SimConnect.dll"
Found SimConnect build 10.0.60905.0
    Looking for SimConnect.dll with "C:\WINDOWS\WinSxS\*SimConnect*10.0.60905.0*"
    Looking for SimConnect.dll with "C:\WINDOWS\WinSxS\Fusion\*SimConnect*"
    Found the path, now trying "C:\WINDOWS\WinSxS\Fusion\x86_microsoft.flightsimulator.simconnect_67c7c14424d61b5b_none_48d5d2360f51e4d0\10.0\10.0.62607.0\SimConnect.dll"
    No SimConnect.dll found there
    Found the path, now trying "C:\WINDOWS\WinSxS\Fusion\x86_microsoft.flightsimulator.simconnect_67c7c14424d61b5b_none_7a98ffdea9fe1e16\10.0\10.0.62607.0\SimConnect.dll"
    No SimConnect.dll found there
    Looking for SimConnect.dll with "C:\WINDOWS\WinSxS\*SimConnect*10.0.62607.0*"
    Looking for SimConnect.dll with "C:\WINDOWS\WinSxS\Fusion\*SimConnect*"
    Found the path, now trying "C:\WINDOWS\WinSxS\Fusion\x86_microsoft.flightsimulator.simconnect_67c7c14424d61b5b_none_48d5d2360f51e4d0\10.0\10.0.61242.0\SimConnect.dll"
Found SimConnect build 10.0.61242.0
    Looking for SimConnect.dll with "C:\WINDOWS\WinSxS\*SimConnect*10.0.61242.0*"
    Looking for SimConnect.dll with "C:\WINDOWS\WinSxS\Fusion\*SimConnect*"
    Found the path, now trying "C:\WINDOWS\WinSxS\Fusion\x86_microsoft.flightsimulator.simconnect_67c7c14424d61b5b_none_48d5d2360f51e4d0\10.0\10.0.61259.0\SimConnect.dll"
    No SimConnect.dll found there
    Found the path, now trying "C:\WINDOWS\WinSxS\Fusion\x86_microsoft.flightsimulator.simconnect_67c7c14424d61b5b_none_7a98ffdea9fe1e16\10.0\10.0.61259.0\SimConnect.dll"
Found SimConnect build 10.0.61259.0
    Looking for SimConnect.dll with "C:\WINDOWS\WinSxS\*SimConnect*10.0.61259.0*"
Checking if there's already a version of FSUIPC4 installed in:
       C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL
... Version 4.977 found.
FSX Modules folder already exists.
Okay -- installed FSUIPC4 into "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\Z590GTA\AppData\Roaming"
Now finding \Microsoft\FSX\FSX.CFG for all users, including this one
Looking in "C:\Users\All Users\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Default\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Public\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Z590GTA\AppData\Roaming"
Found FSX.CFG in "C:\Users\Z590GTA\AppData\Roaming\Microsoft\FSX\FSX.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
     (for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
"Modules\FSUIPC Documents" folder already exists.
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "The 2016 List of FSX and P3D Controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "Offset Mapping for PMDG 777X.pdf" okay
   Installed "Offset Mapping for PMDG 747QOTSII.pdf" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
   Installed "FSUIPC4_Loader.dll" okay
===========================================================

All installer tasks completed.
Registration dialog exit: selected  FSUIPC DELETE
Deleted previous registration ...
Providing FSUIPC registration dialogue ...
Registration for FSUIPC4 was cancelled or failed! (result code 40)

*************** End of Install Log ***************

 

Link to comment
Share on other sites

56 minutes ago, VulcanDriver said:

registerd for FS9 many years ago but I've lost my key.  Can you provided me with key please.

For FS9, you used FSUIPC3. FSUIPC4 is a different product and requires a new key, available from SimMarket. If you have already purchased a key for FSUIPC4, your key details will be available from your SimMarket account.

John

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.