GUID help

Driver170 · February 16, 2016

pete is this right

[JoyNames]

AutoAssignLetters=Yes

0=Saitek Pro Flight Rudder Pedals

0.GUID={A908DB30-D445-11E5-800B-444553540000}

1=737YOKE-LE by ACE

1.GUID={A9090240-D445-11E5-800D-444553540000}

2=JetMAX 737 Throttle

2.GUID={A9095060-D445-11E5-8011-444553540000}

A=Saitek Pro Flight Rudder Pedals

B=737YOKE-LE by ACE

C=JetMAX 737 Throttle

A.GUID={A908DB30-D445-11E5-800B-444553540000}

B.GUID={A9090240-D445-11E5-800D-444553540000}

C.GUID={A9095060-D445-11E5-8011-444553540000}

Pete Dowson · February 16, 2016

pete is this right

If that is what FSUIPC reads from your Registry, why shouldn't it be right? Mine is different. Everyone's is different. GUIDs are different all the time. That's the point. They are intended to be unique. Why the question?

Pete

Driver170 · February 16, 2016

My question is have i duplicated it right?

Pete Dowson · February 16, 2016

My question is have i duplicated it right?

Are, you mean to assign letters manually, instead of letting the AutoAssignLetters mechanism work? Easiest way to check is to arrange them next to each other, thus:

0=Saitek Pro Flight Rudder Pedals
A=Saitek Pro Flight Rudder Pedals

0.GUID={A908DB30-D445-11E5-800B-444553540000}
A.GUID={A908DB30-D445-11E5-800B-444553540000}

1=737YOKE-LE by ACE
B=737YOKE-LE by ACE

1.GUID={A9090240-D445-11E5-800D-444553540000}
B.GUID={A9090240-D445-11E5-800D-444553540000}

2=JetMAX 737 Throttle
C=JetMAX 737 Throttle

2.GUID={A9095060-D445-11E5-8011-444553540000}
C.GUID={A9095060-D445-11E5-8011-444553540000}

Looks pretty good to me.

BTW the main advantage of doing it manually is getting to assign more meaningful letters, like P for the Pedals (or R for Rudder), T for Throttle and Y for Yoke. But if you've already run FS since you had the letters assigned it is too late to change without a lot of editing, as it will have used the A, B, C assignments already.

Pete

Driver170 · February 16, 2016

Ok thanks pete i'll keep it how i've done it, thanks alot for confirming

Driver170 · March 10, 2016

Hi pete i have done it manually does this look in order

[JoyNames]

AutoAssignLetters=no

0=Saitek Pro Flight Rudder Pedals

0.GUID={A908DB30-D445-11E5-800B-444553540000}

R=Saitek Pro Flight Rudder Pedals

R.GUID={A908DB30-D445-11E5-800B-444553540000}

1=737YOKE-LE by ACE

1.GUID={A9090240-D445-11E5-800D-444553540000}

Y=737YOKE-LE by ACE

Y.GUID={A9090240-D445-11E5-800D-444553540000}

T=JetMAX 737 Throttle

T.GUID={A9095060-D445-11E5-8011-444553540000}

2=JetMAX 737 Throttle

2.GUID={A9095060-D445-11E5-8011-444553540000}

Driver170 · March 10, 2016

also after starting up the NGX i lost my jetmax throttle axis - spoilers, flaps and throttle i had to reassign them? other switches etc where still assigned only them i lost why?

Pete Dowson · March 10, 2016

Hi pete i have done it manually does this look in order

Yes, but surely you don't need me just to compare lines. Why the title "GUID help" specifically?

also after starting up the NGX i lost my jetmax throttle axis - spoilers, flaps and throttle i had to reassign them? other switches etc where still assigned only them i lost why?

Sorry, I've no idea what you've done nor what your INI file looks like, and I can't guess. FSUIPC never discards assignments, they are as stored in the INI file, or possibly in separate Profiles files if you opted for UseProfiles=Files.

Pete

Driver170 · March 10, 2016

I wasn't sure if it was done right when i done it manually!

Well not sure what happened then!

Pete Dowson · March 10, 2016

Well not sure what happened then!

I can't help with that as you supplied no information. As I said, I can't even guess.

Pete

Driver170 · March 11, 2016

[JoyNames]

AutoAssignLetters=no

0=Saitek Pro Flight Rudder Pedals

0.GUID={A908DB30-D445-11E5-800B-444553540000}

R=Saitek Pro Flight Rudder Pedals

R.GUID={A908DB30-D445-11E5-800B-444553540000}

1=737YOKE-LE by ACE

1.GUID={A9090240-D445-11E5-800D-444553540000}

Y=737YOKE-LE by ACE

Y.GUID={A9090240-D445-11E5-800D-444553540000}

T=JetMAX 737 Throttle

T.GUID={A9095060-D445-11E5-8011-444553540000}

2=JetMAX 737 Throttle

2.GUID={A9095060-D445-11E5-8011-444553540000}

C=<< MISSING JOYSTICK >>

B=<< MISSING JOYSTICK >>

A=<< MISSING JOYSTICK >>

I have lost all my FSUIPC settings after making the above change also it says

C=<< MISSING JOYSTICK >>

B=<< MISSING JOYSTICK >>

A=<< MISSING JOYSTICK >>

Pete Dowson · March 11, 2016

[JoyNames]

AutoAssignLetters=no

0=Saitek Pro Flight Rudder Pedals

0.GUID={A908DB30-D445-11E5-800B-444553540000}

R=Saitek Pro Flight Rudder Pedals

R.GUID={A908DB30-D445-11E5-800B-444553540000}

1=737YOKE-LE by ACE

1.GUID={A9090240-D445-11E5-800D-444553540000}

Y=737YOKE-LE by ACE

Y.GUID={A9090240-D445-11E5-800D-444553540000}

T=JetMAX 737 Throttle

T.GUID={A9095060-D445-11E5-8011-444553540000}

2=JetMAX 737 Throttle

2.GUID={A9095060-D445-11E5-8011-444553540000}

C=<< MISSING JOYSTICK >>

B=<< MISSING JOYSTICK >>

A=<< MISSING JOYSTICK >>

I have lost all my FSUIPC settings after making the above change also it says

C=<< MISSING JOYSTICK >>

B=<< MISSING JOYSTICK >>

A=<< MISSING JOYSTICK >>

I assume you must have first let it autoassign the letters, so it did do so and assigned A, B, C. You need to use A, B, C now because all your assignments are made that way (I assume -- I still can't tell because you STILL provide insufficient information, like the actual INI contents!).

If you wanted to choose your own letters you need to do so at the beginning, NOT after everything has been automatically assigned to A B C ...

Pete

Driver170 · March 11, 2016

Since doing that change i lost all assignments in FSUIPC all buttons, switches axis.

[General]

UpdatedByVersion=4949f

History=8D1FKGBH4J4L0OQUBVO9Y

InitDelayDevicesToo=No

NewInterceptTextMenu=No

UseSystemTime=No

UseMidMouseBtn=Yes

MouseWheelMove=No

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=No

FixMachSpeedBug=No

DeleteVehiclesForAES=Yes

AutoScanDevices=Yes

AssignJoystickIDs=Yes

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=No

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=No

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=Yes

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=Substring

UseProfiles=Yes

EnableMouseLook=No

DelayedMouseLookZoom=No

AxesWrongRange=No

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

InitDelay=0

GetNearestAirports=No

OOMcheck=Yes

OOMcheckInterval=10

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

InitialStallTime=10

NormalStallTime=1

LuaRerunDelay=66

Console=No

FSVersionUsed="Lockheed Martin® Prepar3D® v3",3.1.3.1

SimConnectUsed=3.1.0.0

[JoyNames]

AutoAssignLetters=Yes

0=Saitek Pro Flight Rudder Pedals

0.GUID={A908DB30-D445-11E5-800B-444553540000}

R=Saitek Pro Flight Rudder Pedals

R.GUID={A908DB30-D445-11E5-800B-444553540000}

1=737YOKE-LE by ACE

1.GUID={A9090240-D445-11E5-800D-444553540000}

Y=737YOKE-LE by ACE

Y.GUID={A9090240-D445-11E5-800D-444553540000}

T=JetMAX 737 Throttle

T.GUID={A9095060-D445-11E5-8011-444553540000}

2=JetMAX 737 Throttle

2.GUID={A9095060-D445-11E5-8011-444553540000}

C=<< MISSING JOYSTICK >>

B=<< MISSING JOYSTICK >>

A=<< MISSING JOYSTICK >>

[Axes]

PollInterval=10

RangeRepeatRate=10

[buttons]

PollInterval=25

ButtonRepeat=20,10

[AutoSave]

Next=1

Interval=60

Files=10

SaveOnGround=No

AutoSaveEnabled=No

[GPSout]

GPSoutEnabled=No

Port=COM1

Speed=4800

Interval=2000

PosTo6Decimal=No

SimModeIndicator=No

Sentences=

[GPSout2]

GPSoutEnabled=No

Port=<none set>

Speed=4800

Interval=2000

PosTo6Decimal=No

SimModeIndicator=No

Sentences=

[WideServer]

WideFSenabled=Yes

[sounds]

Path=C:\P3D\Sound\

Device1=Primary Sound Driver

Device2=Speakers (Turtle Beach Z300)

[Profile.737NGX]

1=Boeing 737-8ASNGX Ryanair (EI-ESR) Winglets

[buttons.737NGX]

0=PC,0,C65752,1

1=UC,0,C65752,0

3=PB,3,C65580,0

4=RB,0,C65615,0

5=RB,1,C65607,0

6=PC,2,C65860,0

7=PC,6,C65861,0

8=RC,1,C65966,0

9=UC,1,C65967,0

10=RC,4,C65971,0

11=UC,4,C65972,0

12=PC,8,C70320,0

13=UC,8,C70320,1

14=PC,7,C70321,0

15=UC,7,C70321,1

16=PB,4,C65552,0

17=RC,3,C66634,0

18=RB,2,C66287,0

19=UB,2,C66287,0

[JoystickCalibration.737NGX]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

LeftBrake=0

RightBrake=0

[Axes.737NGX]

RangeRepeatRate=10

0=AX,256,D,7,0,0,0

1=AY,256,D,8,0,0,0

2=AR,256,F,65764,65869,0,0

3=BX,256,D,1,45,0,0

4=BY,256,D,2,46,0,0

5=CR,256,D,23,0,0,0

6=CU,256,D,22,0,0,0

7=CV,256,D,10,0,0,0

8=CS,256,D,9,0,0,0

[Keys.737NGX]

1=81,8,66695,0

3=223,8,66278,0

4=49,8,66279,0

5=69,8,66297,0

6=82,8,66317,0

[Monitor]

Monitor0=0,024C,4,0

Display=4

[Auto]

1= Lua DynamicFriction

[LuaFiles]

1=DynamicFriction

Driver170 · March 11, 2016

Pete would you know why an axis on my jetmax 737 TQ is stuck on the same axis in P3D assignments?

Pete Dowson · March 11, 2016

Since doing that change i lost all assignments in FSUIPC all buttons, switches axis.

No, there all still there! Just take a look. As I said, they are all assigned to A, B and C. If you change the letters, as you have done, how do you expect ANY software to work out which of your new letters are A B and C? You've simply destroyed the links!

Just change back to A, B, C for joysticks 0, 1, and 2. The only way of changing letter assignments otherwise is either starting again with a new INI, or editing all those A, B, C assignments you can see.

Pete would you know why an axis on my jetmax 737 TQ is stuck on the same axis in P3D assignments?

Sorry, P3D assignments are not relevant to FSUIPC. You need to disable controllers in P3D if you assign anything in FSUIPC or you will get conflicts!

Pete

Driver170 · March 11, 2016

Ok thanks for helping out :) all sorted with the assignments!

GUID help

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Important Information