neo2810 Posted April 23, 2016 Report Share Posted April 23, 2016 Hi Pete, For a while now (3 separate versions), I've had an odd issue where FSUIPC will crash the sim when I confirm any control changes on just 2 of my planes. So if I make changes on PMDG planes, or the Dash 8, absolutely no issues, but if I change anything (buttons, axis) on the Carenado Baron 58 or Cirrus SR22 (just those 2 planes) when I hit the FSUIPC OK button the sim crashes. It also crashes vPilot with unhandled exception HRESULT: 0xC000014B. The changes are saved ok, so I've just left it as it is till now. From Event Viewer: Application: Prepar3D.exeFramework Version: v4.0.30319Description: The process was terminated due to an unhandled exception.Exception Info: System.ArgumentException at System.TimeSpan.Interval(Double, Int32) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr) Faulting application name: Prepar3D.exe, version: 3.2.3.16769, time stamp: 0x56df48ceFaulting module name: KERNELBASE.dll, version: 10.0.10586.162, time stamp: 0x56cd55abException code: 0xc000041dFault offset: 0x000bdad8Faulting process ID: 0x2a30Faulting application start time: 0x01d19d596e1cb380Faulting application path: G:\Lockheed Martin\Prepar3D v3\Prepar3D.exeFaulting module path: C:\WINDOWS\SYSTEM32\KERNELBASE.dllReport ID: 6d7f1ac0-e3ca-4071-8e6e-65d4956685e7Faulting package full name:Faulting package-relative application ID: Here's the FSUIPC log: ********* FSUIPC4, Version 4.949p by Pete Dowson *********Prepar3D.exe version = 3.2.3.16769Reading options from "G:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"Running inside Prepar3D v3 on Windows 8.0Module base=1DBA0000User Name="***SNIP***"User Addr="***SNIP***"FSUIPC4 Key is providedWIDEFS7 not user registered, or expired 0 System time = 23/04/2016 13:13:06 0 FLT path = "C:\Users\awhal\Documents\Prepar3D v3 Files\" 0 ------ Module Version Check ------ 0 acontain.dll: 3.2.3.16769 0 api.dll: 3.2.3.16769 0 controls.dll: 3.2.3.16769 0 fs-traffic.dll: 3.2.3.16769 0 G3D.dll: 3.2.3.16769 0 language.dll: 3.2.3.16769 0 sim1.dll: 3.2.3.16769 0 visualfx.dll: 3.2.3.16769 0 weather.dll: 3.2.3.16769 0 window.dll: 3.2.3.16769 0 ---------------------------------- 0 Trying G:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D3.dll 0 Found it: trying to connect 0 FS path = "G:\Lockheed Martin\Prepar3D v3\" 203 ---------------------- Joystick Device Scan ----------------------- 203 Product= BU0836X Interface 203 Manufacturer= Leo Bodnar 203 Vendor=1DD2, Product=1001 (Version 1.36) 203 Serial Number= B36342 203 Product= Saitek Pro Flight Yoke 203 Manufacturer= Saitek 203 Vendor=06A3, Product=0BAC (Version 3.4) 203 Serial Number= Saitek 203 Product= Saitek Pro Flight Quadrant 219 Manufacturer= Saitek 219 Vendor=06A3, Product=0C2D (Version 2.1) 219 Serial Number= Saitek 219 Product= Button Box Interface 219 Manufacturer= Leo Bodnar 219 Vendor=1DD2, Product=1140 (Version 1.4) 219 Serial Number= B50181 219 Product= Logitech Extreme 3D 219 Manufacturer= Logitech 219 Vendor=046D, Product=C215 (Version 2.4) 219 Serial Number= Logitech 235 Product= Pro Flight Cessna Rudder Pedals 235 Manufacturer= Mad Catz 235 Vendor=06A3, Product=0765 (Version 1.9) 235 Serial Number= Example# 235 ------------------------------------------------------------------- 360 Run: "C:\Users\awhal\Desktop\projectFLYTools.exe" 422 Run: "D:\Program Files (x86)\SPAD\Spad.exe" 469 LogOptions=00000000 00000001 469 ------------------------------------------------------------------- 469 ------ Setting the hooks and direct calls into the simulator ------ 469 --- CONTROLS timer memory location obtained ok 469 --- SIM1 Frictions access gained 469 ASN active function link set 469 --- FS Controls Table located ok 469 --- Installed Mouse Macro hooks ok. 469 Wind smoothing may be by ASN, not FSUIPC, if it is running 469 Will switch smoothing action when ASN starts/stops 469 --- All links okay (except older global weather setting method) 469 ------------------------------------------------------------------- 469 SimConnect_Open succeeded: waiting to check version okay 469 Trying to use SimConnect Prepar3D 44610 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.2.3.2 (SimConnect: 3.2.0.0) 44610 Initialising SimConnect data requests now 44610 FSUIPC Menu entry added 44625 C:\Users\awhal\Documents\Prepar3D v3 Files\Default.fxml 44625 G:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\WoP3_Spitfire\spitIIa.air 79844 G:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Carenado SR22_GTSX_Turbo\sr22t.air 122860 System time = 23/04/2016 13:15:09, Simulator time = 08:09:26 (07:09Z) 123031 Aircraft="SR22T Cirrus VH-SLR" 123844 Starting everything now ... 123844 LUA.0: beginning "G:\Lockheed Martin\Prepar3D v3\Modules\ipcReady.lua" 123844 LUA.0: ended "G:\Lockheed Martin\Prepar3D v3\Modules\ipcReady.lua" 123860 LUA.1: 123875 LUA.1: [iNIT]LINDA:: Loading... 123875 Run: "C:\Users\awhal\AppData\Local\vPilot\vPilot.exe" 123891 Run: "C:\Program Files (x86)\EZCA\EZCA.exe" 123938 Ready for ASN WX radar 123938 Run: "D:\Program Files (x86)\HiFi\ASNext_P3D\ASNext.exe" 124031 LUA.1: LINDA:: Aircraft: SR22T Cirrus VH-SLR 124031 LUA.1: LINDA:: Aircraft module detected: FSX Default 124094 LUA.0: LINDA:: AivlaSoft library loaded... 124094 LUA.0: LINDA:: FSX standard library loaded... 124110 LUA.0: LINDA:: IVAO library loaded... 124110 LUA.0: LINDA:: RealityXP library loaded... 124110 LUA.0: LINDA:: Weather library loaded... 124125 LUA.0: LINDA:: A2A MAP library loaded... 124203 LUA.0: LINDA:: Loading a fallback joysticks config... 124203 LUA.0: LINDA:: Loading FSX Default joysticks config... 124219 LUA.0: LINDA:: Module: FSX Default Started... 124235 LUA.0: LINDA:: Ready to go, Captain! 124235 LUA.0: LINDA:: 124344 LUA.0: LINDA:: Offsets watching list cleared! 125172 Advanced Weather Interface Enabled Can you help shed any light? Link to comment Share on other sites More sharing options...
Pete Dowson Posted April 24, 2016 Report Share Posted April 24, 2016 For a while now (3 separate versions), I've had an odd issue where FSUIPC will crash the sim when I confirm any control changes on just 2 of my planes. So if I make changes on PMDG planes, or the Dash 8, absolutely no issues, but if I change anything (buttons, axis) on the Carenado Baron 58 or Cirrus SR22 (just those 2 planes) when I hit the FSUIPC OK button the sim crashes. It also crashes vPilot with unhandled exception HRESULT: 0xC000014B. The changes are saved ok, so I've just left it as it is till now. The details you provide show it isn't FSUIPC causing a crash: Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.ArgumentException at System.TimeSpan.Interval(Double, Int32) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr) FSUIPC doesn't use any part of Framework. Something you have running which uses FSUIPC is probably the culprit. The Log shows you using LINDA. Maybe there's some incompatible element in that? Does it use .NET Framework? I'm afraid I know nothing about LINDA. So, first see if you still get crashes without it, and then see if LINDA support can help. If it isn't LINDA then, as you say, if I change anything (buttons, axis) on the Carenado Baron 58 or Cirrus SR22 (just those 2 planes) There's something odd about those add-ons, maybe only in relation to LINDA. FSUIPC does care or know what aircraft you are using. Changing buttons or axes goes through the same code for all. Pete Link to comment Share on other sites More sharing options...
neo2810 Posted April 24, 2016 Author Report Share Posted April 24, 2016 I'll see if I can find a correlation, Pete. It's not LINDA, I've only recently started using it and this has been happening for a while. I thought it might be Carenado planes but I have 5, of which only 2 are causing the crash. It must be something which is unique to the B58 and the SR22 but trying to work that out will be tricky... Link to comment Share on other sites More sharing options...
Thomas Richter Posted April 24, 2016 Report Share Posted April 24, 2016 Hi, you have also running those as a source, projectFLYTools.exe and Spad.exe 360 Run: "C:\Users\awhal\Desktop\projectFLYTools.exe" 422 Run: "D:\Program Files (x86)\SPAD\Spad.exe" Link to comment Share on other sites More sharing options...
Pete Dowson Posted April 24, 2016 Report Share Posted April 24, 2016 Hi, you have also running those as a source, projectFLYTools.exe and Spad.exe 360 Run: "C:\Users\awhal\Desktop\projectFLYTools.exe" 422 Run: "D:\Program Files (x86)\SPAD\Spad.exe" Well spotted Thomas! Maybe the problem is related to one of those? Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now