Jump to content
The simFlight Network Forums

FSUIPC is not showing up in Prepar3d 4.1


Recommended Posts

25 minutes ago, maukro_1990 said:

It seems that FSUIPC creates the DLL.XML at the wrong direction (AppData-Roaming). 

The AppData\Roaming\Lockheed Martin\Prepar3D v4 folder IS the correct directory! I think you maybe a bit confused? (Easy to get confused with L-M's new rather over complex add-on control system).

The ProgramData DLL.XML file is where higher priority loads are enabled. FSUIPC5 should be the last loaded except for the Active Sky DLL, it is best in the AppData\Roaming version.

Pete

 

 

Link to comment
Share on other sites

Hi Mr Dowson,

it seems that I have the same problem here,  the installer runs fine, then When I run P3d there is no fsuipc option in the add-on menu.

this is my install log:

Installer for FSUIPC5.DLL version 5.122


Looking in registry for Prepar3D v4 install path:
     HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v4
     Parameter"AppPath"
... >>>  OK! FOUND Prepar3D v4!  <<< ...
     AppPath=F:\
===========================================================

INSTALLATION FOR Prepar3D v4:
AppPath="F:\"
Checking version of the Prepar3D v4 EXE:
... Version 4.1.7.22841  (Need at least 4.0.20.21316)
Checking if there's already a version of FSUIPC5 installed as:
       F:\Modules\FSUIPC5.DLL
... No previous valid version found.
Prepar3D v4 Modules folder created okay!
Okay -- installed FSUIPC5 into "F:\Modules\FSUIPC5.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\nico\AppData\Roaming"
Now finding \Lockheed Martin\Prepar3D v4\Prepar3D.CFG for all users, including this one
Looking in "C:\Users\All Users\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Default\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\nico\AppData\Roaming"
Found Prepar3D.CFG in "C:\Users\nico\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.CFG"
Now checking DLL.XML ...
... No previous DLL.XML found, creating new one.
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
Looking in "C:\Users\Public\AppData\Roaming"
 ... No Prepar3D.CFG there
Attempt to set the ACL entries for Modules access permissions failed, error = 1332
"Modules\FSUIPC Documents" folder created okay!
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC5 User Guide.pdf" okay
   Installed "FSUIPC5 for Advanced Users.pdf" okay
   Installed "The 2016 List of FSX and P3D Controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
   Installed "FSUIPC5 History.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "Offset Mapping for PMDG 777X.pdf" okay
   Installed "Offset Mapping for PMDG 747QOTSII.pdf" okay
===========================================================

All installer tasks completed.
Registration dialog 'not now' selected
*************** End of Install Log ***************

 

can you help me with this issue please?

thanks, Nicolas

Link to comment
Share on other sites

paulavny, i had the same message, remove the DLL file into the user/app data/roaming/LM/P3D then you will be able to reinstall fsuipc. It works, then I choose not now for the registration and fsuipc installs fine. But unfortunately, it doesn't fix the initial problem that fsuipc does not appear in P3D..

Edited by niokilt
Link to comment
Share on other sites

6 hours ago, Pete Dowson said:

Sorry, but a picture is of no use whatsoever. I *know* what they look like!

Please find the DETAILS of what it thinks went wrong! Use the Windows Event Viewer! Crash data is needed!

Pete

 

 

Hope that’s the right stuff :

 

Log Name:      Application
Source:        Application Error
Date:          11/19/2017 4:34:46 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      DESKTOP-E3GKPO4
Description:
Faulting application name: Install FSUIPC5.exe, version: 5.1.2.2, time stamp: 0x5a0ee72a
Faulting module name: Install FSUIPC5.exe, version: 5.1.2.2, time stamp: 0x5a0ee72a
Exception code: 0xc0000409
Fault offset: 0x000000000000d9a7
Faulting process id: 0x18f4
Faulting application start time: 0x01d3617e377bc550
Faulting application path: C:\Users\Paul\Desktop\FSUIPC5 (1)\Install FSUIPC5.exe
Faulting module path: C:\Users\Paul\Desktop\FSUIPC5 (1)\Install FSUIPC5.exe
Report Id: b21e477a-8a31-484d-88ae-6526918f38b3
Faulting package full name: 
Faulting package-relative application ID: 
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2017-11-19T21:34:46.186291600Z" />
    <EventRecordID>1285</EventRecordID>
    <Channel>Application</Channel>
    <Computer>DESKTOP-E3GKPO4</Computer>
    <Security />
  </System>
  <EventData>
    <Data>Install FSUIPC5.exe</Data>
    <Data>5.1.2.2</Data>
    <Data>5a0ee72a</Data>
    <Data>Install FSUIPC5.exe</Data>
    <Data>5.1.2.2</Data>
    <Data>5a0ee72a</Data>
    <Data>c0000409</Data>
    <Data>000000000000d9a7</Data>
    <Data>18f4</Data>
    <Data>01d3617e377bc550</Data>
    <Data>C:\Users\Paul\Desktop\FSUIPC5 (1)\Install FSUIPC5.exe</Data>
    <Data>C:\Users\Paul\Desktop\FSUIPC5 (1)\Install FSUIPC5.exe</Data>
    <Data>b21e477a-8a31-484d-88ae-6526918f38b3</Data>
    <Data>
    </Data>
    <Data>
    </Data>
  </EventData>
</Event>
 
 and Also this :
- System
   
- Provider
      Name Application Error
   
- EventID 1000
      Qualifiers 0
   
  Level 2
   
  Task 100
   
  Keywords 0x80000000000000
   
- TimeCreated
      SystemTime 2017-11-19T21:34:46.186291600Z
   
  EventRecordID 1285
   
  Channel Application
   
  Computer DESKTOP-E3GKPO4
   
  Security
- EventData
      Install FSUIPC5.exe
      5.1.2.2
      5a0ee72a
      Install FSUIPC5.exe
      5.1.2.2
      5a0ee72a
      c0000409
      000000000000d9a7
      18f4
      01d3617e377bc550
      C:\Users\Paul\Desktop\FSUIPC5 (1)\Install FSUIPC5.exe
      C:\Users\Paul\Desktop\FSUIPC5 (1)\Install FSUIPC5.exe
      b21e477a-8a31-484d-88ae-6526918f38b3
       
Link to comment
Share on other sites

3 hours ago, niokilt said:

Is there anything to say about my install log please?

No, it looks fine, and it shows that a brand new DLL.XML file was created in 

C:\Users\nico\AppData\Roaming\Lockheed Martin\Prepar3D v4\

Please find the DLL.XML file and attach it or show it (not a screenshot though, please).

Pete

 

 

Link to comment
Share on other sites

7 hours ago, paulavny said:

I’m not a computer wiz , nor a beginner . Just a Pilot from a different era.

Which "era" is that? I am 74. Are you of an earlier generation?

All I need is data to look at. Files mostly.

1 hour ago, paulavny said:

Hope that’s the right stuff :

Yes, thank you.

This error: Exception code: 0xc0000409

is, according to this web page http://winwiki.org/exception-code-0xc0000409/
caused by Windows system file corruption.

 

It appears to be something to do with the Locale setting (CRT) in Win10. I just found this report:

This was a bug in the TH1 build (10.0.10240) of the Universal CRT. The bug was fixed in the Windows 10 November Update (TH2) build (10.0.10586).

So please check that your Windows is properly updated and that you are on build 10.0.10586 or later.

Pete

 

 

Link to comment
Share on other sites

Peter,

First of all, I've been using the registered versions of FSUIPC4 with FSX for the past few years, and I recently upgraded to the registered version of FSUIPC5 when I purchased P3Dv4.

Everything has always worked fine in Windows 7. I upgraded my PC over the weekend, and I updated my OS to Windows 10. I haven't gotten FSUIPC5 to work since.

FSUIPC5 seems to install and allow me to register correctly, but it will not show in the addons menu when I start P3Dv4. I noticed that the <Path> in the DLL.XML file displays \Modules\FSUIPC5.DLL</Path>. I tried changing it to <Path>E:\Lockheed Martin\Prepar3D v4\Modules\</Path>, but this causes the sim to Crash. However, it doesn't crash completely, as it still shows it is running in the Windows Task Manager.

I tried the most recent windows update tonight, and I tried removing, reinstalling, registering FSUIPC5 again. This has not solved the issue. Any further assistance on this issue is appreciated. I can upload any logs or data you may need. Just tell me where to start.

Thank you.

 

Link to comment
Share on other sites

TO ALL POSTERS IN THESE THREADS:

Looks like the uploaded Installer was corrupted somehow. I downloaded it myself and got the same result. I've re-uploaded it now, so please clear your cache (F5 I think0 and re-download it.

I've added a DLL.XML file corruption check, which, if you run it now without first deleting your old corrupted DLL.XML, will prompt you to delete it and re-run the installer.

Pete

 

Link to comment
Share on other sites

6 hours ago, JackRiordan said:

FSUIPC5 seems to install and allow me to register correctly, but it will not show in the addons menu when I start P3Dv4. I noticed that the <Path> in the DLL.XML file displays \Modules\FSUIPC5.DLL</Path>. I tried changing it to <Path>E:\Lockheed Martin\Prepar3D v4\Modules\</Path>, but this causes the sim to Crash.

The first format is fine. Your replacement is trying to tell P3D to load a program called "modules", which is a folder not a program!

3 hours ago, JackRiordan said:

Update. I removed the .KEY file from the modules folder, and now FSUIPC5 is now present in the addon list when P3Dv4 loads.

I need to see the FSUIPC5.LOG file with the KEY properly present. FSUIPC5 is obviously being loaded okay or else whether the KEY file is there or not would make no difference.

NOTE that your posts are essentially on a different subject to the main subject of this thread, which was a corrupt installer problem.

Pete

 

Link to comment
Share on other sites

12 hours ago, Pete Dowson said:

TO ALL POSTERS IN THESE THREADS:

Looks like the uploaded Installer was corrupted somehow. I downloaded it myself and got the same result. I've re-uploaded it now, so please clear your cache (F5 I think0 and re-download it.

Pete

 

Pete ,

A little younger then you are .

From the “round analog dials “ time . Too much “glass” in the cockpit - not for me .

  “ Looks like the uploaded Installer was corrupted somehow “

indeed it was . Was good a few weeks ago , don’t understand how it changed . 

 Now after the upgrade of my machine needed it again but no luck .

To business : Managed to install finally , but now it’s not shown in my P3D V4 top 

menu .      Here’s is a copy of my installer ( I think )

  Regards

Paul

 
Installer for FSUIPC5.DLL version 5.122
 
 
Looking in registry for Prepar3D v4 install path:
     HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v4
     Parameter"AppPath"
... >>>  OK! FOUND Prepar3D v4!  <<< ...
     AppPath=C:\Program Files\Lockheed Martin\Prepar3D v4\
===========================================================
 
INSTALLATION FOR Prepar3D v4:
AppPath="C:\Program Files\Lockheed Martin\Prepar3D v4\"
Checking version of the Prepar3D v4 EXE:
... Version 4.1.7.22841  (Need at least 4.0.20.21316)
Checking if there's already a version of FSUIPC5 installed as:
       C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.DLL
... Version 5.122 found.
Prepar3D v4 Modules Modules folder already exists.
Okay -- installed FSUIPC5 into "C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.DLL"
Looking for the current user's Application Data path: 
... found as "C:\Users\Paul\AppData\Roaming"
Now finding \Lockheed Martin\Prepar3D v4\Prepar3D.CFG for all users, including this one
Looking in "C:\Users\All Users\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Default\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
 ... No Prepar3D.CFG there
Looking in "C:\Users\Paul\AppData\Roaming"
Found Prepar3D.CFG in "C:\Users\Paul\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC5 section.
No previous FSUIPC5 entry found, so adding it now ...
Cannot edit the DLL.XML file to activate FSUIPC.
"Modules\FSUIPC Documents" folder already exists.
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC5 User Guide.pdf" okay
   Installed "FSUIPC5 for Advanced Users.pdf" okay
   Installed "The 2016 List of FSX and P3D Controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
   Installed "FSUIPC5 History.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "Offset Mapping for PMDG 777X.pdf" okay
   Installed "Offset Mapping for PMDG 747QOTSII.pdf" okay
===========================================================
 
All installer tasks completed.
Registration dialog exit: selected  FSUIPC REGISTER
Providing FSUIPC registration dialogue ...
Registration for FSUIPC5 was successful! (result code 00)
 
*************** End of Install Log ***************
 
Link to comment
Share on other sites

11 minutes ago, paulavny said:

Managed to install finally , but now it’s not shown in my P3D V4 top 

menu .      Here’s is a copy of my installer ( I think )

Yes, the install shows everything worked fine.  Was that after re-downloading the Installer?

But I need to see your DLL.XML file, and i need you to check the Modules folder for an FSUIPC5.LOG, and if there is one, show it to me.

The DLL.XML file will be here:
C:\Users\Paul\AppData\Roaming\Lockheed Martin\Prepar3D v4\

and the FSUIPC5.LOG may or may not be here:
C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\

Pete

 

Link to comment
Share on other sites

10 hours ago, Pete Dowson said:

 

The DLL.XML file will be here:
C:\Users\Paul\AppData\Roaming\Lockheed Martin\Prepar3D v4\

and the FSUIPC5.LOG may or may not be here:
C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\

Pete

 

Pete,

Couldn’t find your requests :

DLL.XML - no \AppData\

FSUIPC5.LOG - not there .

thanks

Paul

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.