Marty Posted July 7, 2019 Author Report Posted July 7, 2019 If I go to windows games devices calibration the throttle flaps and speed brake arm register as device Buo836a and can be calibrated. The park brake and fuel cutoff levers don’t. If this helps
John Dowson Posted July 7, 2019 Report Posted July 7, 2019 As I said, I need to see your joyscan.csv and log files, as well as your current ini - could you please attach all 3. If your devices are recognised by windows as joystick/HID devices then they should be recognised by FSUIPC.
Marty Posted July 7, 2019 Author Report Posted July 7, 2019 ********* FSUIPC5, Version 5.151 (21st February 2019) by Pete Dowson ********* Running inside Prepar3D v4 Module base=7FED9920000 Windows 7 Home Premium 64 Bit with SP 1.0 reported as Build 7601 (OS 6.1) Prepar3D.exe version = 4.5.12.30293 Reading options from "C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.ini" Checking the Registrations now ... User Name="MARTYN DAVIS" User Addr="marty.davis71@gmail.com" FSUIPC5 Key is provided WideFS7 Key is provided 0 System time = 07/07/2019 20:43:10 0 FLT UNC path = "C:\Users\sim\Documents\Prepar3D v4 Files\" 16 Using DialogMode 16 FS UNC path = "C:\Program Files\Lockheed Martin\Prepar3D v4\" 156 ---------------------- Joystick Device Scan ----------------------- 156 Product= Saitek Pro Flight Rudder Pedals 156 Manufacturer= Saitek 156 Vendor=06A3, Product=0763 (Version 1.0) 156 GUIDs returned for product: VID_06A3&PID_0763: 156 GUID= {E98E5CA0-5C91-11E1-8006-444553540000} 156 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0 156 GUID= {E98E5CA0-5C91-11E1-8005-444553540000} 156 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0 172 Product= Saitek Pro Flight Rudder Pedals 172 Manufacturer= Saitek 172 Vendor=06A3, Product=0763 (Version 1.0) 172 Product= BU0836A Interface 172 Manufacturer= Leo Bodnar 172 Serial Number= B31362 172 Vendor=16C0, Product=05BA (Version 1.34) 172 GUIDs returned for product: VID_16C0&PID_05BA: 172 GUID= {8C6FD830-FE13-11E2-8001-444553540000} 172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R3970,U3970,V3980,X0,Y0,Z3661 172 Product= 737YOKE-LE by ACE 172 Manufacturer= ACE 172 Serial Number= A18593 172 Vendor=16C0, Product=2786 (Version 1.35) 172 GUIDs returned for product: VID_16C0&PID_2786: 172 GUID= {6368B4F0-476D-11E2-8001-444553540000} 172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X2822,Y2739,Z0 172 GUID= {E98E5CA0-5C91-11E1-8009-444553540000} 172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X2860,Y2950,Z0 172 Product= 737YOKE-LE by ACE 172 Manufacturer= ACE 172 Serial Number= A23813 172 Vendor=16C0, Product=2786 (Version 1.35) 172 ------------------------------------------------------------------- 172 Device acquired for use: 172 Joystick ID = 1 (Registry okay) 172 1=Saitek Pro Flight Rudder Pedals 172 1.GUID={E98E5CA0-5C91-11E1-8006-444553540000} 172 Device acquired for use: 172 Joystick ID = 4 (Registry okay) 172 4=Saitek Pro Flight Rudder Pedals 172 4.GUID={E98E5CA0-5C91-11E1-8005-444553540000} 172 Device acquired for use: 172 Joystick ID = 0 (Registry okay) 172 0=BU0836A Interface 172 0.GUID={8C6FD830-FE13-11E2-8001-444553540000} 172 Device acquired for use: 172 Joystick ID = 2 (Registry okay) 172 2=737YOKE-LE by ACE 172 2.GUID={6368B4F0-476D-11E2-8001-444553540000} 172 Device acquired for use: 172 Joystick ID = 3 (Registry okay) 172 3=737YOKE-LE by ACE 172 3.GUID={E98E5CA0-5C91-11E1-8009-444553540000} 172 ------------------------------------------------------------------- 188 LogOptions=00000000 00000001 188 ------------------------------------------------------------------- 188 SimConnect_Open succeeded: waiting to check version okay 188 Opened separate AI Traffic client okay 188 ### PDKmodeHelper callback registered 2434 Running in "Lockheed Martin® Prepar3D® v4", Version: 4.5.12.30293 (SimConnect: 4.5.0.0) 2434 Initialising SimConnect data requests now 2434 FSUIPC Menu entry added 2434 ... Using Prepar3D with Professional License 2450 C:\Users\sim\Documents\Prepar3D v4 Files\Prepar3D_Default.fxml 2450 C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Prosim 737-800 Regular\Prosim738.air 32417 ### The user object is 'Prosim_737_800_Winglets_Prosim_Livery' 32417 ### Mode is NORMAL 33182 ### Mode: PAUSE on 45677 Loading Complete ... 45709 ### Mode is NORMAL 48017 Aircraft loaded: running normally now ... 48142 User Aircraft ID 2 supplied, now being used 48298 System time = 07/07/2019 20:43:58, Simulator time = 14:02:28 (05:02Z) 48298 Aircraft="Prosim_737_800_Winglets_Prosim_Livery" 54445 -------------------- Starting everything now ---------------------- 54445 Starting WideServer now ... 55958 Advanced Weather Interface Enabled 69046 Sim stopped: average frame rate for last 20 secs = 4.5 fps 69046 Max AI traffic was 0 aircraft 69046 ------------------------------------------------------------------- 70357 === Closing session: waiting for DLLStop to be called ... 78687 === DLLStop called ... 78687 === Closing external processes we started ... 79686 === About to kill any Lua plug-ins still running ... 79842 === Closing global Lua thread 80856 === About to kill my timers ... 81058 === Restoring window procs ... 81058 === Unloading libraries ... 81058 === stopping other threads ... 81058 === ... Button scanning ... 81152 === ... Axis scanning ... 81261 === Releasing joystick devices ... 81261 === Freeing macro memory 81261 === Removing any offset overrides 81261 === Closing all WideFS threads 81261 TransmitClientEvent failed! 81261 TransmitClientEvent failed! 81433 TransmitClientEvent failed! 81433 TransmitClientEvent failed! 81495 TransmitClientEvent failed! 81495 TransmitClientEvent failed! 81604 TransmitClientEvent failed! 81604 TransmitClientEvent failed! 81714 TransmitClientEvent failed! 81714 TransmitClientEvent failed! 81823 TransmitClientEvent failed! 81823 TransmitClientEvent failed! 81932 TransmitClientEvent failed! 81932 TransmitClientEvent failed! 82041 TransmitClientEvent failed! 82041 TransmitClientEvent failed! 82150 TransmitClientEvent failed! 82150 TransmitClientEvent failed! 82260 TransmitClientEvent failed! 82260 TransmitClientEvent failed! 82369 TransmitClientEvent failed! 82369 TransmitClientEvent failed! 82494 TransmitClientEvent failed! 82494 TransmitClientEvent failed! 82587 TransmitClientEvent failed! 82587 TransmitClientEvent failed! 82696 TransmitClientEvent failed! 82696 TransmitClientEvent failed! 82806 TransmitClientEvent failed! 82806 TransmitClientEvent failed! 82915 TransmitClientEvent failed! 82915 TransmitClientEvent failed! 83024 TransmitClientEvent failed! 83024 TransmitClientEvent failed! 83133 TransmitClientEvent failed! 83133 TransmitClientEvent failed! 83242 TransmitClientEvent failed! 83242 TransmitClientEvent failed! 83352 TransmitClientEvent failed! 83352 TransmitClientEvent failed!
Marty Posted July 7, 2019 Author Report Posted July 7, 2019 ********* FSUIPC5, Version 5.151 (21st February 2019) by Pete Dowson ********* Running inside Prepar3D v4 Module base=7FED9920000 Windows 7 Home Premium 64 Bit with SP 1.0 reported as Build 7601 (OS 6.1) Prepar3D.exe version = 4.5.12.30293 Reading options from "C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.ini" Checking the Registrations now ... User Name="MARTYN DAVIS" User Addr="marty.davis71@gmail.com" FSUIPC5 Key is provided WideFS7 Key is provided 0 System time = 07/07/2019 20:43:10 0 FLT UNC path = "C:\Users\sim\Documents\Prepar3D v4 Files\" 16 Using DialogMode 16 FS UNC path = "C:\Program Files\Lockheed Martin\Prepar3D v4\" 156 ---------------------- Joystick Device Scan ----------------------- 156 Product= Saitek Pro Flight Rudder Pedals 156 Manufacturer= Saitek 156 Vendor=06A3, Product=0763 (Version 1.0) 156 GUIDs returned for product: VID_06A3&PID_0763: 156 GUID= {E98E5CA0-5C91-11E1-8006-444553540000} 156 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0 156 GUID= {E98E5CA0-5C91-11E1-8005-444553540000} 156 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0 172 Product= Saitek Pro Flight Rudder Pedals 172 Manufacturer= Saitek 172 Vendor=06A3, Product=0763 (Version 1.0) 172 Product= BU0836A Interface 172 Manufacturer= Leo Bodnar 172 Serial Number= B31362 172 Vendor=16C0, Product=05BA (Version 1.34) 172 GUIDs returned for product: VID_16C0&PID_05BA: 172 GUID= {8C6FD830-FE13-11E2-8001-444553540000} 172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R3970,U3970,V3980,X0,Y0,Z3661 172 Product= 737YOKE-LE by ACE 172 Manufacturer= ACE 172 Serial Number= A18593 172 Vendor=16C0, Product=2786 (Version 1.35) 172 GUIDs returned for product: VID_16C0&PID_2786: 172 GUID= {6368B4F0-476D-11E2-8001-444553540000} 172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X2822,Y2739,Z0 172 GUID= {E98E5CA0-5C91-11E1-8009-444553540000} 172 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X2860,Y2950,Z0 172 Product= 737YOKE-LE by ACE 172 Manufacturer= ACE 172 Serial Number= A23813 172 Vendor=16C0, Product=2786 (Version 1.35) 172 ------------------------------------------------------------------- 172 Device acquired for use: 172 Joystick ID = 1 (Registry okay) 172 1=Saitek Pro Flight Rudder Pedals 172 1.GUID={E98E5CA0-5C91-11E1-8006-444553540000} 172 Device acquired for use: 172 Joystick ID = 4 (Registry okay) 172 4=Saitek Pro Flight Rudder Pedals 172 4.GUID={E98E5CA0-5C91-11E1-8005-444553540000} 172 Device acquired for use: 172 Joystick ID = 0 (Registry okay) 172 0=BU0836A Interface 172 0.GUID={8C6FD830-FE13-11E2-8001-444553540000} 172 Device acquired for use: 172 Joystick ID = 2 (Registry okay) 172 2=737YOKE-LE by ACE 172 2.GUID={6368B4F0-476D-11E2-8001-444553540000} 172 Device acquired for use: 172 Joystick ID = 3 (Registry okay) 172 3=737YOKE-LE by ACE 172 3.GUID={E98E5CA0-5C91-11E1-8009-444553540000} 172 ------------------------------------------------------------------- 188 LogOptions=00000000 00000001 188 ------------------------------------------------------------------- 188 SimConnect_Open succeeded: waiting to check version okay 188 Opened separate AI Traffic client okay 188 ### PDKmodeHelper callback registered 2434 Running in "Lockheed Martin® Prepar3D® v4", Version: 4.5.12.30293 (SimConnect: 4.5.0.0) 2434 Initialising SimConnect data requests now 2434 FSUIPC Menu entry added 2434 ... Using Prepar3D with Professional License 2450 C:\Users\sim\Documents\Prepar3D v4 Files\Prepar3D_Default.fxml 2450 C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\Prosim 737-800 Regular\Prosim738.air 32417 ### The user object is 'Prosim_737_800_Winglets_Prosim_Livery' 32417 ### Mode is NORMAL 33182 ### Mode: PAUSE on 45677 Loading Complete ... 45709 ### Mode is NORMAL 48017 Aircraft loaded: running normally now ... 48142 User Aircraft ID 2 supplied, now being used 48298 System time = 07/07/2019 20:43:58, Simulator time = 14:02:28 (05:02Z) 48298 Aircraft="Prosim_737_800_Winglets_Prosim_Livery" 54445 -------------------- Starting everything now ---------------------- 54445 Starting WideServer now ... 55958 Advanced Weather Interface Enabled 69046 Sim stopped: average frame rate for last 20 secs = 4.5 fps 69046 Max AI traffic was 0 aircraft 69046 ------------------------------------------------------------------- 70357 === Closing session: waiting for DLLStop to be called ... 78687 === DLLStop called ... 78687 === Closing external processes we started ... 79686 === About to kill any Lua plug-ins still running ... 79842 === Closing global Lua thread 80856 === About to kill my timers ... 81058 === Restoring window procs ... 81058 === Unloading libraries ... 81058 === stopping other threads ... 81058 === ... Button scanning ... 81152 === ... Axis scanning ... 81261 === Releasing joystick devices ... 81261 === Freeing macro memory 81261 === Removing any offset overrides 81261 === Closing all WideFS threads 81261 TransmitClientEvent failed! 81261 TransmitClientEvent failed! 81433 TransmitClientEvent failed! 81433 TransmitClientEvent failed! 81495 TransmitClientEvent failed! 81495 TransmitClientEvent failed! 81604 TransmitClientEvent failed! 81604 TransmitClientEvent failed! 81714 TransmitClientEvent failed! 81714 TransmitClientEvent failed! 81823 TransmitClientEvent failed! 81823 TransmitClientEvent failed! 81932 TransmitClientEvent failed! 81932 TransmitClientEvent failed! 82041 TransmitClientEvent failed! 82041 TransmitClientEvent failed! 82150 TransmitClientEvent failed! 82150 TransmitClientEvent failed! 82260 TransmitClientEvent failed! 82260 TransmitClientEvent failed! 82369 TransmitClientEvent failed! 82369 TransmitClientEvent failed! 82494 TransmitClientEvent failed! 82494 TransmitClientEvent failed! 82587 TransmitClientEvent failed! 82587 TransmitClientEvent failed! 82696 TransmitClientEvent failed! 82696 TransmitClientEvent failed! 82806 TransmitClientEvent failed! 82806 TransmitClientEvent failed! 82915 TransmitClientEvent failed! 82915 TransmitClientEvent failed! 83024 TransmitClientEvent failed! 83024 TransmitClientEvent failed! 83133 TransmitClientEvent failed! 83133 TransmitClientEvent failed! 83242 TransmitClientEvent failed! 83242 TransmitClientEvent failed! 83352 TransmitClientEvent failed! 83352 TransmitClientEvent failed! 83461 TransmitClientEvent failed! 83461 TransmitClientEvent failed! 83586 TransmitClientEvent failed! 83586 TransmitClientEvent failed! 83679 TransmitClientEvent failed! 83679 TransmitClientEvent failed! 83788 TransmitClientEvent failed! 83788 TransmitClientEvent failed! 83898 TransmitClientEvent failed! 83898 TransmitClientEvent failed!
Marty Posted July 7, 2019 Author Report Posted July 7, 2019 General] UpdatedByVersion=5151 History=ZHLS0H8HHGK4K0GRY3WHE MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixMachSpeedBug=No AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=No UseProfiles=Yes EnableMouseLook=No AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 LuaRerunDelay=66 Console=No OOMcheck=Yes InitDelayDevicesToo=No PMDG737offsets=Auto PMDG747offsets=Auto PMDG777offsets=Auto Annotate=Yes UseSystemTime=No UseMidMouseBtn=Yes RestoreSimcWindows=No DelayedMouseLookZoom=No WideLuaGlobals=Yes TextFileMaxRead=4095 TextFileNumbers=Yes TextFilePhonetics=Yes ThreadAffinityMask=x0 LuaAffinityMask=x0 LogOptionProtect=Yes TimeForLuaClosing=2 TrafficStallTime=1 InitialStallTime=10 NormalStallTime=1 ComReadLoopTime=20 DebugLua=Yes FSVersionUsed="Lockheed Martin® Prepar3D® v4",4.5.12.30293 SimConnectUsed=4.5.0.0 LogWeather=Yes LogWrites=Yes LogReads=Yes LogEvents=Yes LogLua=Yes LogAxes=Yes LogButtonsKeys=Yes LogExtras=Yes [JoyNames] AutoAssignLetters=No T=G-Throttles << MISSING JOYSTICK >> T.GUID={048B2C90-D690-11E1-8001-444553540000} B=BU0836X Interface << MISSING JOYSTICK >> B.GUID={8C6FD830-FE13-11E2-8001-444553540000} R=Saitek Pro Flight Rudder Pedals R.GUID={E98E5CA0-5C91-11E1-8006-444553540000} S=Saitek Pro Flight Rudder Pedals S.GUID={E98E5CA0-5C91-11E1-8005-444553540000} Z=737YOKE-LE by ACE Z.GUID={6368B4F0-476D-11E2-8001-444553540000} Y=737YOKE-LE by ACE Y.GUID={E98E5CA0-5C91-11E1-8009-444553540000} 1=Saitek Pro Flight Rudder Pedals 1.GUID={E98E5CA0-5C91-11E1-8006-444553540000} 2=737YOKE-LE by ACE 2.GUID={6368B4F0-476D-11E2-8001-444553540000} 3=737YOKE-LE by ACE 3.GUID={E98E5CA0-5C91-11E1-8009-444553540000} 4=Saitek Pro Flight Rudder Pedals 4.GUID={E98E5CA0-5C91-11E1-8005-444553540000} 0=BU0836A Interface 0.GUID={8C6FD830-FE13-11E2-8001-444553540000} A=BU0836A Interface A.GUID={8C6FD830-FE13-11E2-8001-444553540000} [Buttons] ButtonRepeat=20,10 13=P64,0,C66072,0 -{PITOT_HEAT_ON}- 14=U64,0,C66073,0 -{PITOT_HEAT_OFF}- 15=P64,1,C65591,0 -{SITUATION_RESET}- 16=P64,24,C65733,0 -{ABORT}- 17=P64,25,Cx02003320,xABCD -{offset word set, offset 3320}- 21=PT,0,Cx02000BC8,x0007 22=UT,0,Cx02000BC8,x0000 23=RT,3,C65602,0 24=UT,3,C65697,0 25=PB,0,Cx02000BC8,x0007 26=UB,0,Cx02000BC8,x0000 27=PB,1,C66079,0 28=PB,2,C66080,0 29=RB,3,C65607,0 30=RB,4,C65615,0 31=PB,5,Cx02007370,x003C 32=RY,1,C65607,0 -{ELEV_TRIM_DN}- 33=RY,0,C65615,0 -{ELEV_TRIM_UP}- 34=RZ,1,C65607,0 -{ELEV_TRIM_DN}- 35=RZ,0,C65615,0 -{ELEV_TRIM_UP}- 36=PZ,4,C65561,0 -{PAUSE_TOGGLE}- PollInterval=25 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [WideServer] WideFSenabled=Yes AdvertiseService=No Port=8002 Port2=9002 ProtocolPreferred=UDP AllowShutdown=Yes [Sounds] Path=D:\fsx\Sound\ Device1=Primary Sound Driver Device2=Speakers (Realtek High Definition Audio) Device3=Realtek Digital Output (Realtek High Definition Audio) Device4=MX613ST-4 (NVIDIA High Definition Audio) Device5=MX613ST-0 (NVIDIA High Definition Audio) Device6=MX613ST-C (NVIDIA High Definition Audio) [Axes] 0=TX,256,D,9,0,0,0 1=TY,256,D,10,0,0,0 2=TZ,256,D,23,0,0,0 3=TU,256,D,22,0,0,0 PollInterval=10 RangeRepeatRate=10 4=RX,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 5=RY,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 6=RR,256,D,3,0,0,0 -{ DIRECT: Rudder }- 7=ZX,256,D,1,0,0,0 -{ DIRECT: Aileron }- 8=ZY,256,D,2,0,0,0 -{ DIRECT: Elevator }- 9=YX,256,D,1,0,0,0 -{ DIRECT: Aileron }- 10=YY,256,D,2,0,0,0 -{ DIRECT: Elevator }- 11=SX,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 12=SY,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 13=SR,256,D,3,0,0,0 -{ DIRECT: Rudder }- [ClientNames] 1=SLAVE12 2=SLAVE13 3=SLAVE14 [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=Yes ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 FlapStarts=-16384,-13765,-9239,-6209,-2020,336,6755,10375,11868 Flaps=-16384,16380 FlapEnds=-14027,-10025,-7032,-3553,75,4292,10226,11607,13137 RudderBlendLowest=1 Throttle1=-16380,-512,512,16380 Throttle=-16380,16380 [Traffic Limiter] AirportPreference=50 PlannedAirportsPreference=50 GroundPreference=50 NearerPreference=50 TargetFrameRate=0 TrafficLimit=0 [Monitor] Display=15
Marty Posted July 7, 2019 Author Report Posted July 7, 2019 3 hours ago, John Dowson said: As I said, I need to see your joyscan.csv and log files, as well as your current ini - could you please attach all 3. If your devices are recognised by windows as joystick/HID devices then they should be recognised by FSUIPC. where would i find joyscan.csv
Marty Posted July 7, 2019 Author Report Posted July 7, 2019 ********* WideServer.DLL Log [version 7.076] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 07/07/19, Time 21:17:29.187: Server name is MASTER11 15085 Initialising TCP/IP server 15085 Initialising UDP/IP server 17082 Connected to computer "SLAVE14" running WideClient version 6.860 (IP=192.168.15.120) UDP 726028 Auto send for 0 stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP 732549 Close signalled to clients 733657 Closing down now ... Memory managed: Offset records: 244 alloc, 242 free Read buffer usage: 6932 alloc, 6932 free, max in session: 1 Write buffer usage: 31690 alloc, 31690 free, max in session: 1 Throughput maximum achieved: 20 frames/sec, 789 bytes/sec Throughput average achieved for complete session: 4 frames/sec, 137 bytes/sec Average receive rate from "SLAVE14": 9 frames/sec, 552 bytes/sec ********* Log file closed *********
Marty Posted July 7, 2019 Author Report Posted July 7, 2019 ********* WideServer.DLL Log [version 7.076] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 07/07/19, Time 20:44:04.710: Server name is MASTER11 15662 Initialising TCP/IP server 15662 Initialising UDP/IP server 26816 Auto send for 0 stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP 33540 Close signalled to clients
Marty Posted July 7, 2019 Author Report Posted July 7, 2019 oh if i move throttles in prosim they show as as the interface card as well with heap of numbers
John Dowson Posted July 8, 2019 Report Posted July 8, 2019 (edited) 22 hours ago, Marty said: where would i find joyscan.csv The same folder as your log an ini files - a file called FSUIPC5.Joyscan.csv. Which PC is your throttle connected to? Both your ini and log files don't show this device connected. It looks like you do have issues with WideFS. Error 10013 indicates that there is a socket connection error, most probably caused by a firewall or antivirus software. You need either to stop the firewall/anti0virus software or configure to allow access form your client to server PCs and vica-versa. I am not familiar with ProSim. Pete should be back tomorrow and will be able to advise further with this. Do you see anything in the axis assignment tab when you move your throttle? I am slightly confused...if the BU0836A Interface card IS your throttle, but just renamed, then the update I previously posted will restore your previous assignments, i.e. change these lines T=G-Throttles << MISSING JOYSTICK >>T.GUID={048B2C90-D690-11E1-8001-444553540000} to T=BU0836A InterfaceT.GUID={8C6FD830-FE13-11E2-8001-444553540000} and now also remove this: A=BU0836A InterfaceA.GUID={8C6FD830-FE13-11E2-8001-444553540000} John Edited July 8, 2019 by John Dowson Further info added
Marty Posted July 8, 2019 Author Report Posted July 8, 2019 The joyscan.csv file is not in that folder I have looked around but can’t locate it. I dont recall it ever being there. I will make your changes the throttle quad is connected to the server pc via USB (pc prepar is located) there is a wire connection to the Bodnar interface card I have looked at this and it is I presume the park brake LED light. There is an SIOC script for park brake light I’m assuming when it is on the light goes on the Bodnar card is connected to the slave pc where SIOC server is located. I’m assuming Prosim and fsuicpv5 communicate via widefs but having trouble with connection. The firewall is turned off on all pc and just to be sure I made sure the wide client 9Now the slave had firewall permission i can’t see how the throttle is connected to the Bodnar card and it was running via fsuicp before the changes
Pete Dowson Posted July 9, 2019 Report Posted July 9, 2019 21 hours ago, Marty said: The joyscan.csv file is not in that folder I have looked around but can’t locate it. FSUIPC5 always created the FSUIPC5.Joyscan.csv file. It will certainly be there, in the same folder as your FSUIPC5.INI and FSUIPC5.Log files. 21 hours ago, Marty said: I will make your changes the throttle quad is connected to the server pc via USB (pc prepar is located) there is a wire connection to the Bodnar interface card I have looked at this and it is I presume the park brake LED light. There is an SIOC script for park brake light I’m assuming when it is on the light goes on the Bodnar card is connected to the slave pc where SIOC server is located. I’m assuming Prosim and fsuicpv5 communicate via widefs but having trouble with connection. I'm finding this a bit confusing. If the Bodnar board is connected to the same PC as your P3D Installation, then that's where the throttle axes will be seen, and directly, not via WideFS. If your throttles are connected to a Bodnar board on a different PC, then WideClient does not send the axis inputs through to FSUIPC, only buttons -- these will be seen as connecting to joysticks with numbers with a client PC number first. Client numbers are listed in your FSUIPC5.INI file, here: [ClientNames]1=SLAVE122=SLAVE133=SLAVE14 I don't know what troubles you are having with connection, or which WideFS client your Bodnar board is connected to (if it is), but the WideServer.LOG you posted showed a healthy connection with "SLAVE14": ********* WideServer.DLL Log [version 7.076] *********Blocksize guide = 8192 (double allowed)Date (dmy): 07/07/19, Time 21:17:29.187: Server name is MASTER11 15085 Initialising TCP/IP server 15085 Initialising UDP/IP server 17082 Connected to computer "SLAVE14" running WideClient version 6.860 (IP=192.168.15.120) UDP 726028 Auto send for 0 stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP 732549 Close signalled to clients 733657 Closing down now ...Memory managed: Offset records: 244 alloc, 242 freeRead buffer usage: 6932 alloc, 6932 free, max in session: 1Write buffer usage: 31690 alloc, 31690 free, max in session: 1Throughput maximum achieved: 20 frames/sec, 789 bytes/secThroughput average achieved for complete session: 4 frames/sec, 137 bytes/secAverage receive rate from "SLAVE14": 9 frames/sec, 552 bytes/sec********* Log file closed ********* The error 10013 is only the disconnection when you closed the P3D session. It was obviously quite happily exchanging data for nearly 12 minutes before this. However, WideFs is not involved in your throttle axis problems. 22 hours ago, Marty said: i can’t see how the throttle is connected to the Bodnar card and it was running via fsuicp before the changes If the only change was from P3D3 to P3D4 and so FSUIPC4 to FSUIPC5, and no changes were made to the hardware at all, then everything would have worked exactly as before. That's always been one of the whole points of the FSUIPC interface -- continuity right through FS versions since FS98. Changes to the USB connections would mean the assignments have to be re-matched, for which I see John has helped sort out for you. Also, re-installs of Windows changes things too because it will generate new "GUIDs" -- the unique identity assigned by Windows to everything (all devices, all objects, even all internal textures and so on). Incidentally, I assume you are using the old version of ProSim (v1)? The latest versions of Prosim v2 do require you to assign and calibrate all flight controls in ProSim. But i have been doing this for my throttles successfully now since first using ProSim, which was then an early version 1. I've only just recently moved my flight controls (yoke, rudder, till0 to ProSim. Pete
Marty Posted July 9, 2019 Author Report Posted July 9, 2019 1 hour ago, Pete Dowson said: FSUIPC5 always created the FSUIPC5.Joyscan.csv file. It will certainly be there, in the same folder as your FSUIPC5.INI and FSUIPC5.Log files. I'm finding this a bit confusing. If the Bodnar board is connected to the same PC as your P3D Installation, then that's where the throttle axes will be seen, and directly, not via WideFS. If your throttles are connected to a Bodnar board on a different PC, then WideClient does not send the axis inputs through to FSUIPC, only buttons -- these will be seen as connecting to joysticks with numbers with a client PC number first. Client numbers are listed in your FSUIPC5.INI file, here: [ClientNames]1=SLAVE122=SLAVE133=SLAVE14 I don't know what troubles you are having with connection, or which WideFS client your Bodnar board is connected to (if it is), but the WideServer.LOG you posted showed a healthy connection with "SLAVE14": ********* WideServer.DLL Log [version 7.076] *********Blocksize guide = 8192 (double allowed)Date (dmy): 07/07/19, Time 21:17:29.187: Server name is MASTER11 15085 Initialising TCP/IP server 15085 Initialising UDP/IP server 17082 Connected to computer "SLAVE14" running WideClient version 6.860 (IP=192.168.15.120) UDP 726028 Auto send for 0 stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP 732549 Close signalled to clients 733657 Closing down now ...Memory managed: Offset records: 244 alloc, 242 freeRead buffer usage: 6932 alloc, 6932 free, max in session: 1Write buffer usage: 31690 alloc, 31690 free, max in session: 1Throughput maximum achieved: 20 frames/sec, 789 bytes/secThroughput average achieved for complete session: 4 frames/sec, 137 bytes/secAverage receive rate from "SLAVE14": 9 frames/sec, 552 bytes/sec********* Log file closed ********* The error 10013 is only the disconnection when you closed the P3D session. It was obviously quite happily exchanging data for nearly 12 minutes before this. However, WideFs is not involved in your throttle axis problems. If the only change was from P3D3 to P3D4 and so FSUIPC4 to FSUIPC5, and no changes were made to the hardware at all, then everything would have worked exactly as before. That's always been one of the whole points of the FSUIPC interface -- continuity right through FS versions since FS98. Changes to the USB connections would mean the assignments have to be re-matched, for which I see John has helped sort out for you. Also, re-installs of Windows changes things too because it will generate new "GUIDs" -- the unique identity assigned by Windows to everything (all devices, all objects, even all internal textures and so on). Incidentally, I assume you are using the old version of ProSim (v1)? The latest versions of Prosim v2 do require you to assign and calibrate all flight controls in ProSim. But i have been doing this for my throttles successfully now since first using ProSim, which was then an early version 1. I've only just recently moved my flight controls (yoke, rudder, till0 to ProSim. Pete The throttles are connected via USB to the server pc the park brake lever led light to the slave pc via a bodner board. The USB connection has not been changed on the server pc for the throttle I will look again tomorrow for the joystick file. It was not in the module folder but I will check again to be absolutely sure. Prosim is v1.45 I was going to upgrade that but after this I think I’ll give it a miss. The bodner card is connected to the slave pc only and not the server. The only change other than the prepar upgrade was fsuicpv5 and the accidental upgrade to windows on the slave pc the bodner card is connected to. I disconnected the firewall and just to be sure made sure the wide client was in the firewall accepted programmes. I will implement johns changes tomorrow and c how things go. Thank you for the support thus far
Pete Dowson Posted July 9, 2019 Report Posted July 9, 2019 1 hour ago, Marty said: The throttles are connected via USB to the server pc and 1 hour ago, Marty said: The bodner card is connected to the slave pc only and not the server. So the throttle unit is a normal Windows-recognised throttle, or does it have specific drivers? What make is it? Check Windows "Game Controllers". Is it seen there, as throttle, and will it show its actions there? If not then that's what FSUIPC doesn't see it. 1 hour ago, Marty said: The only change other than the prepar upgrade was fsuicpv5 and the accidental upgrade to windows on the slave pc the bodner card is connected to. Well the slave PC change would have no effect at all on the main PC so that's not the main problem. And it really isn't possible for things to get messed up by only a change from P3D3 to 4 and FSUIPC4 to 5. They are completely interchangeable as far as FSUIPC is concerned -- well, except for isolated facilities like "mouse macros" which won't apply to ProSim aircraft in any case. So i'm sure something else must have changed in your changeover process. It would be useful to know what, but never mind. Let's move on. 2 hours ago, Marty said: I disconnected the firewall and just to be sure made sure the wide client was in the firewall accepted programmes. I don't think there's much to worry about on the 'slave'. I think we're now only trying to work out why the throttles aren't seen. Incidentally, have you considered assigning and calibrating the throttles in Prosim instead, in any case. I'm sure it suits it better -- as i say, i've been using this method through all ProSim 1 and 2 versions. 2 hours ago, Marty said: Prosim is v1.45 I was going to upgrade that but after this I think I’ll give it a miss. Why? Prosim is becoming more and more capable. What other cockpit software would you consider? Pete
Marty Posted July 11, 2019 Author Report Posted July 11, 2019 Good?, flags, VID, PID, Name, INIid, REGid, RegEntry, INIguid, REGguid, HIDguid, ValsOK?, ReadsOk? ,,, HIDscanning completed N, x00, x06A3, x0763, , -1, -1, 0, {NULL}, {NULL}, {E98E5CA0-5C91-11E1-8006-444553540000}, Y, N N, x00, x06A3, x0763, , -1, -1, 0, {NULL}, {NULL}, {E98E5CA0-5C91-11E1-8005-444553540000}, Y, N N, x00, x16C0, x05BA, , -1, -1, 0, {NULL}, {NULL}, {8C6FD830-FE13-11E2-8001-444553540000}, Y, N N, x00, x16C0, x2786, , -1, -1, 0, {NULL}, {NULL}, {6368B4F0-476D-11E2-8001-444553540000}, Y, N N, x00, x16C0, x2786, , -1, -1, 0, {NULL}, {NULL}, {E98E5CA0-5C91-11E1-8009-444553540000}, Y, N ,,, REGscanning completed N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, -1, 1, 1, {NULL}, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, Y, Y N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, -1, 4, 0, {NULL}, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, Y, Y N, x00, x16C0, x05BA, BU0836A Interface, -1, 0, 0, {NULL}, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, Y, Y N, x00, x16C0, x2786, 737YOKE-LE by ACE, -1, 2, 1, {NULL}, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, Y, Y N, x00, x16C0, x2786, 737YOKE-LE by ACE, -1, 3, 0, {NULL}, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, Y, Y ,,, User settings imported N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 1, 1, 1, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, Y, Y N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 4, 4, 0, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, Y, Y N, x00, x16C0, x05BA, BU0836A Interface, 0, 0, 0, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, Y, Y N, x00, x16C0, x2786, 737YOKE-LE by ACE, 2, 2, 1, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, Y, Y N, x00, x16C0, x2786, 737YOKE-LE by ACE, 3, 3, 0, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, Y, Y ,,, Values matched and decided Y, x1E, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 1, 1, 1, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, {E98E5CA0-5C91-11E1-8006-444553540000}, Y, Y Y, x1E, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 4, 4, 0, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, {E98E5CA0-5C91-11E1-8005-444553540000}, Y, Y Y, x1E, x16C0, x05BA, BU0836A Interface, 0, 0, 0, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, {8C6FD830-FE13-11E2-8001-444553540000}, Y, Y Y, x1E, x16C0, x2786, 737YOKE-LE by ACE, 2, 2, 1, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, {6368B4F0-476D-11E2-8001-444553540000}, Y, Y Y, x1E, x16C0, x2786, 737YOKE-LE by ACE, 3, 3, 0, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, {E98E5CA0-5C91-11E1-8009-444553540000}, Y, Y
Marty Posted July 11, 2019 Author Report Posted July 11, 2019 i found the joyscan.csv file attached i will wait for a response before making johns changes. Im thinking I might use prosim for the throttles as u do i never gave it much thought looks like iam going to have to re config the whole throttle anyway so start afresh. With the sim i want to keep it as close to real 737 800 as i can to mimic real world cockpit. Im still looking at software but for now orbx for scenery mainly airport scenery in australia and AI ATC like vox i will use vatsim and IVAO but i dont want to bod down the sim to much with software.
John Dowson Posted July 11, 2019 Report Posted July 11, 2019 Your joyscan.csv file shows the device BU0836A Interface is recognised and matches you log and ini, so this must be your throttle device - please go ahead and make the suggested changes. I'm not sure if this will work though, as you cannot see the axis value change (in the axis assignment tab) when this is unassigned, which is strange. You could also try downloading the HiDScanner utility - from Run this and move the throttle to see if any axis values are changed (and post the log).
Marty Posted July 11, 2019 Author Report Posted July 11, 2019 1 hour ago, John Dowson said: Your joyscan.csv file shows the device BU0836A Interface is recognised and matches you log and ini, so this must be your throttle device - please go ahead and make the suggested changes. I'm not sure if this will work though, as you cannot see the axis value change (in the axis assignment tab) when this is unassigned, which is strange. You could also try downloading the HiDScanner utility - from Run this and move the throttle to see if any axis values are changed (and post the log). What does FSUICP SDK do? I’m trying to learn about offsets does this have something to do with that?
Marty Posted July 11, 2019 Author Report Posted July 11, 2019 I made johns changes to the ini file and fsuicp is now seeing the throttles speed brake and flaps is there any way to load the old assignments or will I have to re calibrate from scratch.
Marty Posted July 11, 2019 Author Report Posted July 11, 2019 I tried calibrating throttles in Prosim but the MCP module is running on the slave Prosim recommends running on flight sim pc. I tried calibrating on MCP module on flight sim pc but did not recognise will have to do more research I think I will calibrate in fsuicp as originally was
John Dowson Posted July 12, 2019 Report Posted July 12, 2019 22 hours ago, Marty said: What does FSUICP SDK do? I’m trying to learn about offsets does this have something to do with that? The SDK is the 'Software Development Kit', which allows you to write programs (in various languages) that communicate with FSUIPC (i.e. read/write offsets). 22 hours ago, Marty said: I made johns changes to the ini file and fsuicp is now seeing the throttles speed brake and flaps The changes did not allow you to see the throttles! They only put back your previous assignments/calibration to that device. If that worked, then you must have been able to see this before, they just weren't assigned. 23 hours ago, Marty said: is there any way to load the old assignments or will I have to re calibrate from scratch Well, what you have now is all your old assignments back from your old ini, or thats what I thought! Looking at your ini, it looks like you have your flaps and toe brakes calibrated: LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 FlapStarts=-16384,-13765,-9239,-6209,-2020,336,6755,10375,11868 Flaps=-16384,16380 FlapEnds=-14027,-10025,-7032,-3553,75,4292,10226,11607,13137 But no calibration for your ailerons, elevator, throttle, etc, so you will need to calibrate them (especially if you are sending to FSUIPC for calibration). Then again, if you are going to upgrade ProSim, you will probably be better off assigning and calibrating there, as Pete suggested. 23 hours ago, Marty said: I tried calibrating throttles in Prosim but the MCP module is running on the slave Prosim recommends running on flight sim pc It is recommended to run on the flight sim pc to avoid delays caused by network latency, although it should still work running on the slave.
Marty Posted July 13, 2019 Author Report Posted July 13, 2019 12 hours ago, John Dowson said: The SDK is the 'Software Development Kit', which allows you to write programs (in various languages) that communicate with FSUIPC (i.e. read/write offsets). The changes did not allow you to see the throttles! They only put back your previous assignments/calibration to that device. If that worked, then you must have been able to see this before, they just weren't assigned. Well, what you have now is all your old assignments back from your old ini, or thats what I thought! Looking at your ini, it looks like you have your flaps and toe brakes calibrated: LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 FlapStarts=-16384,-13765,-9239,-6209,-2020,336,6755,10375,11868 Flaps=-16384,16380 FlapEnds=-14027,-10025,-7032,-3553,75,4292,10226,11607,13137 But no calibration for your ailerons, elevator, throttle, etc, so you will need to calibrate them (especially if you are sending to FSUIPC for calibration). Then again, if you are going to upgrade ProSim, you will probably be better off assigning and calibrating there, as Pete suggested. It is recommended to run on the flight sim pc to avoid delays caused by network latency, although it should still work running on the slave. Before your suggested changes there was no recognition of the throttles flaps and speed brake in fsuicp now the movements are seen in axis assignments.
Marty Posted July 13, 2019 Author Report Posted July 13, 2019 12 hours ago, John Dowson said: The SDK is the 'Software Development Kit', which allows you to write programs (in various languages) that communicate with FSUIPC (i.e. read/write offsets). The changes did not allow you to see the throttles! They only put back your previous assignments/calibration to that device. If that worked, then you must have been able to see this before, they just weren't assigned. Well, what you have now is all your old assignments back from your old ini, or thats what I thought! Looking at your ini, it looks like you have your flaps and toe brakes calibrated: LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 FlapStarts=-16384,-13765,-9239,-6209,-2020,336,6755,10375,11868 Flaps=-16384,16380 FlapEnds=-14027,-10025,-7032,-3553,75,4292,10226,11607,13137 But no calibration for your ailerons, elevator, throttle, etc, so you will need to calibrate them (especially if you are sending to FSUIPC for calibration). Then again, if you are going to upgrade ProSim, you will probably be better off assigning and calibrating there, as Pete suggested. It is recommended to run on the flight sim pc to avoid delays caused by network latency, although it should still work running on the slave. I’m not real keen at this time to upgrade Prosim a little weary after this upgrade I will look into it. But I would have to install across 4 pc etc with mcp EFIS and displays running I would hate to upset those. At this time Prosim detects the throttle but I can’t calibrate or assign I really haven’t spent any time on Prosim I wanted to upgrade software before making switch and gauge assignments. I think the sdk is a little out of depth for the moment I understand the principle but I don’t intend on writing programmes I’m still trying to work out SIOC scripting. I will re calibrate the throttles, speed brake and ailerons. The ailerons appear easy but throttles a little different as well as speed brake have looked at some videos and the user manual but appreciate any advice here.
John Dowson Posted July 19, 2019 Report Posted July 19, 2019 We provide (or at least try to...) all the information that you should need in the manuals, so please use them. If you have any issues/problems, then post and we can help (but check FAQ and previous posts first).
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now