Matty260191 Posted April 16, 2020 Author Report Share Posted April 16, 2020 AIRAC 2004 EGLC/09 LYD M189 HAWKE UM189 DRAKE DCT OSPOL M189 NEVIL G27 ARE LFRQ/10 FL240 270/.74 - DEFAULT LRC - DEFAULT 290/.78/3.0 - DEFAULT TOW 45000KG Flaps 4 V1 121 VR 123 V2 128 VFS 198 EGLC LYD5U LDG WEIGHT 42200KG FLAP 5 VREF 130 VAPP 135 VAC 159 (F2) VFS 187 ARE5R DCT RQ401 RNAV10 LFRQ https://drive.google.com/drive/folders/1ahIibx99GwIMepieZ6v-9yMMpvqJkWQi?usp=sharing ^This folder contains the following^(too big for this forum) 8 saves(.cust is the same as .FLT) with their .fxml and .wx files also. The OFP I used (ignore the step climbs i stayed at FL240 the whole time) 2 screenshots showing the FMS arrival constraints. Save files are as follows: 1 - After FMS setup. 2 - After TOGA button pressed with A/T off. 3 - After start. 4 - During climb(this is when I checked and set up the descent and arrival speeds and constraints). 5 - Shortly after TOC. 6 - Just before TOD. 7 - During descent showing i'm over the FMS selected speed but power above Idle. 7-1 - Another later in descent showing i'm still above the FMS speed but engines applying power as i was in light turbulence. 8 - After shut down. Notes: The initial descent at 290Kts was on profile but its gets worse the lower you get as the engines don't Idle completely at the 250/FL100 standard limitation. Arrival speed constraints were half followed. The FMS selected 210 for the fix then went straight back to 240 even though the next fix was also 210. I went to manual selected speed to 210 to avoid issues. When in even the lightest turbulence the speed struggles to bleed off even in level flight as the engines wont Idle. I was on an RNAV arrival and you will notice even though the FF is 3000ft and the runway is 343ft meaning the FMS should create a descent to give a constant descent angle to the runway, it seem like it just sticks it at 3 degrees meaning it descends steeper than the actual path to the runway. This may be normal for this aircraft but being used to flying PMDG FSLABS and QW I find they all will descend from FF height to the runway at a constant angle to meet the runway height at the runway. Please watch the video to see me setup the aircraft performance i left it all to default values to make sure I wasn't causing it. I spent time making sure I could give you as much detail as possible so please respect this and let me know you have all you need. For some reason when I save either using auto save or me doing it they save as .cust files. these are exactly the same as the .FLT files as you can open them and see in Notepad. You may have to change them to .FLT and it will work. I love the aircraft and you have done a great job and the only real issue for me is the constraint following(even in SP1) and the fact the aircraft just wont slow down correctly with A/T on. I am willing to test any future updates as I feel I would prove useful to you. OR Link to comment Share on other sites More sharing options...
FeelThere_Vic Posted April 16, 2020 Report Share Posted April 16, 2020 Hi Matty, Please also attach the .fxml files Videos are fine, but we need the saved files so we can reproduce your issue. Thank you Vic Link to comment Share on other sites More sharing options...
Matty260191 Posted April 16, 2020 Author Report Share Posted April 16, 2020 Did you even read I have put them all in a gdrive folder and there is a link in my post. Too big to upload to this forum Link to comment Share on other sites More sharing options...
Matty260191 Posted April 16, 2020 Author Report Share Posted April 16, 2020 As above https://drive.google.com/drive/folders/1ahIibx99GwIMepieZ6v-9yMMpvqJkWQi Link to comment Share on other sites More sharing options...
Matty260191 Posted April 16, 2020 Author Report Share Posted April 16, 2020 Also you say my issue others have also noted this issue its not just me but I am trying to help you guys fix it. Link to comment Share on other sites More sharing options...
Matty260191 Posted April 17, 2020 Author Report Share Posted April 17, 2020 On 4/16/2020 at 9:41 AM, FeelThere said: Hi Matty, Please also attach the .fxml files Videos are fine, but we need the saved files so we can reproduce your issue. Thank you Vic Did you get the files you needed? Link to comment Share on other sites More sharing options...
Matty260191 Posted April 18, 2020 Author Report Share Posted April 18, 2020 This may be related. Link to comment Share on other sites More sharing options...
Matty260191 Posted April 21, 2020 Author Report Share Posted April 21, 2020 On 4/16/2020 at 9:41 AM, FeelThere said: Hi Matty, Please also attach the .fxml files Videos are fine, but we need the saved files so we can reproduce your issue. Thank you Vic Vic did yo get what you need from the folder? Link to comment Share on other sites More sharing options...
FeelThere_Vic Posted April 21, 2020 Report Share Posted April 21, 2020 Matty, Can you please keep them? We got them, but please don't (yet) remove them. Thank you Vic Link to comment Share on other sites More sharing options...
Matty260191 Posted April 21, 2020 Author Report Share Posted April 21, 2020 No worries will leave the folder in place. Link to comment Share on other sites More sharing options...
FeelThere_Vic Posted April 22, 2020 Report Share Posted April 22, 2020 23 hours ago, Matty260191 said: No worries will leave the folder in place. Thank you! Vic Link to comment Share on other sites More sharing options...
Quoth Posted April 25, 2020 Report Share Posted April 25, 2020 Hi All Happy this issue has been reported, I’ve been having exactly the same problem and thought it was me as I’m just learning to fly this plane. Also using Active Sky for weather. Look forward to it being resolved Kind regards Q Link to comment Share on other sites More sharing options...
FeelThere_Vic Posted April 30, 2020 Report Share Posted April 30, 2020 Matty, PM was sent, please check. Thank you Vic Link to comment Share on other sites More sharing options...
Matty260191 Posted April 30, 2020 Author Report Share Posted April 30, 2020 Got the PM Link to comment Share on other sites More sharing options...
dahsteak Posted May 20, 2020 Report Share Posted May 20, 2020 Any update on this? Possible hotfix? Link to comment Share on other sites More sharing options...
Matty260191 Posted May 20, 2020 Author Report Share Posted May 20, 2020 yes standby. hopefully within days. I just tested a Fix for this along with A/T reacting too much too soon. Link to comment Share on other sites More sharing options...
C2615 Posted May 21, 2020 Report Share Posted May 21, 2020 Is there any information from FT on what's been working on the list after SP1? Link to comment Share on other sites More sharing options...
Matty260191 Posted May 21, 2020 Author Report Share Posted May 21, 2020 Im not FT but yes they are working on new fixes. Link to comment Share on other sites More sharing options...
FeelThere_Vic Posted May 21, 2020 Report Share Posted May 21, 2020 8 hours ago, C2615 said: Is there any information from FT on what's been working on the list after SP1? As you can see we are working on the next SP. We will announce it as soon as possible. Thank you Vic 1 Link to comment Share on other sites More sharing options...
C2615 Posted May 22, 2020 Report Share Posted May 22, 2020 On 5/21/2020 at 9:04 PM, FeelThere said: As you can see we are working on the next SP. We will announce it as soon as possible. Thank you Vic Good to know, thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now